文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第49至60个,产品总数469个

设置提升方向
Pb (II)
ADVANCED POWDER TECHNOLOGY · 2019 · IF 3.25

Kinetics and equilibrium isotherms of adsorption of Pb(II) and Cu(II) onto raw and arginine-modified montmorillonite

Yuting Chu,Muhammad Asim Khan,Fengyun Wang,Mingzhu Xia,Wu Lei,Sidi Zhu

Arg-Mt, was fabricated by modifying sodium montmorillonite (Na-Mt) with Arginine monohydrochloride (Arg salt), to adsorb Pb(II) and Cu(II) in aqueous solution. The X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectrum, thermal analysis (TG/DTG), Brunauer-Emmett-Teller (BET) and Scanning electron microscope (SEM) were employed to investigate the properties of Na-Mt and Arg-Mt. The effects of the amount of modifier, pH value, the initial concentration of M(II), temperature and contact time were tested in a single adsorption system. The isotherm model was well matched with the Langmuir curve and the kinetic adsorption fitted well with the pseudo-second-order rate equation. The saturated adsorption of Pb(II) and Cu(II) by Arg-Mt were 124.69 and 29.15 mg/g, respectively, which were higher than that of Na-Mt (89.08 and 23.93 mg/g). The thermodynamic equation indicated that the adsorption process was spontaneous, endothermic, and the randomness of the samples changed a little after adsorption. The adsorption capacity of heavy metal ions in the binary co-adsorption system was poor than single adsorption system. Furthermore, the adsorbed M(II) onto Arg-Mt can hardly be dissolved under weak acidic condition (pH > 4) according to the desorption experiments. High-efficiency and low-cost make Arg-Mt to be used in the removal of heavy ions in aqueous solution.

研究领域: 环境科学 · 材料科学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
BIORESOURCE TECHNOLOGY · 2020 · IF 7.539

Selective, highly efficient extraction of Cr(III), Pb(II) and Fe(III) from complex water environment with a tea residue derived porous gel adsorbent

Shuaizhong Zhang,Chengzhen Liu,Yongkai Yuan,Minghao Fan,Dandan Zhang,Dongfeng Wang,Ying Xu

A novel macroporous (~150 μm) double network hydrogel (TR/PAA) was prepared from tea residue and acrylic acid, and its performance was systematically evaluated. The static adsorption experiments showed that gel exhibited high selectivity and adsorption capacity, ultrafast kinetics (~10 min) for Cr(III), Pb(II) and Fe(III). The adsorption behavior showed heterogeneous and chemisorption process adsorption capacities of 206.19, 253.16, and 94.88 mg g −1 for Cr(III), Pb(II) and Fe(III), respectively. In pluralistic systems, TR/PAA showed the adsorption order of Fe(III) > Cr(III) > Pb(II). Mechanism studies confirm that nitrogen and oxygen-containing functional groups play a major role in the adsorption process. In the fixed-bed column experiments, the treatment volume of simulated wastewater reached 1400 bed volumes (BV) (21.6 L), producing only 7 BV (323 mL) eluent. This work provides a new avenue for the combination of TR/PAA reuse and heavy metal removal, which is expected to be applied in actual wastewater treatment.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY · 2019 · IF 4.978

Experimental and DFT study of selective adsorption mechanisms of Pb(II) by UiO-66-NH2 modified with 1,8-dihydroxyanthraquinone

Jiling Zhao,Chen Wang,Shixing Wang,Yang Zhou

A new adsorbent (MOFs-DHAQ) was prepared by functionalizing UiO-66-NH 2 with 1,8-dihydroxyanthraquinone to remove Pb(II) from wastewater. The optimum pH, adsorption kinetics and adsorption isotherms were studied. MOFs-DHAQ has a good removal rate for Pb(III) at pH 4. It takes only 30   min to reach maximum adsorption capacity about 213.3 mg/g. The experimental data conforms to the pseudo-secondary kinetics and the Freundlich models. The adsorption process belongs to multilayer chemical adsorption . Desorption and adsorption experiments indicate that the adsorbent can be recycled at least four times. The rising temperature favors the adsorption of Pb(II) on MOFs-DHAQ because the adsorption process is a spontaneous endothermic reaction. The interaction mechanism between Pb(II) and the reactive group is mainly electrostatic interaction and complexation. MOFs-DHAQ has excellent selectivity for removing Pb(II) from wastewater contains a variety of interfering ions. The calculated adsorption capacity ( Q ex ) of Pb(II) for column adsorption was 108.04 mg/g and was consistent with the Thomas model's adsorption capacity( Q Th ) about 109.63mg/g. Density functional theory calculations show that MOFs-DHAQ combines with Pb(II) through monodentate N atoms and bidentate O groups. MOFs-DHAQ has good application prospect in the removal of lead from wastewater.

CAS / MDL: 10312-55-7
研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR STRUCTURE · 2025 · IF 4.7

Rational Engineering of 3D Petal-Like Porous magnetic SnFe₂O₄/Boron Nitride/NiAl-LDH Composite for Pb(II) Ions Removal

Abdelazeem S. Eltaweil,Ahmed E. Awad,Eman M. Abd El-Monaem,Azza M. Shaker,Gehan M. El-Subruiti

The growing issue of Pb 2+ ions contamination in marine environments necessitates the development of effective adsorbents to significantly mitigate this ecological challenge. In response, a novel composite material comprising layered double hydroxide (LDH), boron nitride (BN), and tin ferrite (SnFe 2 O 4 ) was synthesized for the removal of Pb 2+ ions. The synthesized SnFe 2 O 4 /BN/NiAl-LDH composite was characterized using FTIR, XRD, ZP, SEM, and XPS techniques. Pb 2+ ions removal reached equilibrium within 30 minutes, with a removal efficiency of 95.42%. Pb 2+ removal efficiency increased progressively in the following order based on the data: SnFe 2 O 4 /BN/NiAl-LDH (1:1) > SnFe 2 O 4 /BN/NiAl-LDH (3:1) > SnFe 2 O 4 /BN/NiAl-LDH (1:3). Furthermore, the experimental data were consistent with the Langmuir and Freundlich isotherms, as well as the pseudo-second-order kinetic model, with a maximum adsorption capacity of 434.8 mg/g. Notably, the composite retained over 70% removal efficiency after five cycles, demonstrating its efficient recyclability. In summary, SnFe 2 O 4 /BN/NiAl-LDH exhibits rapid and efficient adsorption, easy separation, and excellent recyclability.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2017 · IF 5.951

Fabrication of a Magnetic Cellulose Nanocrystal/Metal–Organic Framework Composite for Removal of Pb(II) from Water

Nan Wang,Xiao-Kun Ouyang,Li-Ye Yang,Ahmed Mohamed Omer

A novel composite material (MCNC@Zn-BTC) is synthesized from magnetic cellulose nanocrystals (MCNC) and a metal–organic framework (MOF), based on Zn(II) and benzene-1,3,5-tricarboxylic acid (Zn-BTC), using a simple mechanical agitation method at room temperature. The developed MCNC@Zn-BTC was characterized by SEM, TEM, FTIR, XRD, XPS, and VSM instruments. The impact of MCNC@Zn-BTC dose, initial Pb(II) concentration, contact time, pH, and adsorption temperature have been explored. Results demonstrated that only 30 min was needed to achieve the adsorption equilibrium; the maximum adsorption capacity was 558.66 mg/g at 298.2 K. Besides, data obtained were fitted to a Langmuir isotherm model (R2 = 0.9890), and the adsorption kinetics followed a pseudo-second-order model. In addition, the removal (%) of Pb(II) remained greater than 80% after five recycled times. Therefore, the novel MCNC@Zn-BTC adsorbent displays great potential to improve the quality of environmental water contaminated with heavy metals.

研究领域: 环境科学 · 材料科学 · 化学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Cleaner Production · 2023 · IF 11.1

Selective adsorption of Pb (II) and Cu (II) on mercapto-functionalized aerogels: Experiments, DFT studies and LCA analysis

Yaoyao Zhang,Kangze Yuan,Luca Magagnin,Xishe Wu,Zhenyi Jiang,Wei Wang

Mercapto-functionalized aerogels (MA-X) were fabricated using γ-mercaptopropyltrimethoxysilane (MPTMS) as a modification reagent to eliminate Pb (II) and Cu (II) ions from wastewater. Mercapto-functionalized aerogel (MA2) with the MPTMS/TEOS molar ratio of 0.5 exhibited the maximum adsorption amounts of 163.99 mg/g for Pb (II) and 172.41 mg/g for Cu (II) in single ion system, respectively. In binary ion system, selective adsorption experiments revealed that the equilibrium adsorption capacity for Cu (II) (161.29 mg/g) was significantly greater than Pb (II) (90.42 mg/g), and the selectivity factor α showed greater selectivity for Cu (II), demonstrating that Cu (II) was more readily adsorbed on MA2. The results showed that adsorption was consistent with pseudo-second order model and Langmuir model. Thermodynamic results demonstrated that adsorption phenomenon was an exothermic reaction that occurred spontaneously. XPS analysis and density functional theory (DFT) simulations showed that the main mechanism for the adsorption of Pb (II) and Cu (II) on MA2 was through coordination chelation of the –SH groups with Pb (II) and Cu (II). DFT calculations showed a lower adsorption energy (E ads ) of Cu (II) (−2.72 eV) with respect to Pb (II) (−0.80 eV), indicating that Cu (II) was more stably adsorbed on MA2 and more difficult to exchange by Pb (II). In order to determine the environmental impact of the MA2 preparation process, a life cycle assessment (LCA) was conducted and contribution of each material to MA2 production was analyzed. Finally, a strategy that is environmentally friendly and effective has been proposed in order to facilitate MA-X adsorbents production and to improve their application for the treatment of heavy metal polluted wastewater.

CAS / MDL: 4420-74-0
研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2021 · IF 13.273

Facile preparation of magnetic Zr-MOF for adsorption of Pb(II) and Cr(VI) from water: Adsorption characteristics and mechanisms

Chen Wang,Chao Xiong,Yali He,Chen Yang,Xiteng Li,Jianzhong Zheng,Shixing Wang

A novel magnetic Zr-MOF named Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI was synthesized by modifying UiO-66-NH 2 with Ni 0.6 Fe 2.4 O 4 and polyethyleneimine and its sorption characteristics for two representing heavy metals Pb(II) and Cr(VI) in water were examined. This material showed good thermal stability and was sufficiently magnetic to allow effective solid-liquid separation. The material had a maximum adsorption capacity of 273.2 mg/g for Pb(II) at pH 4.0 and 428.6 mg/g for Cr(VI) at pH 3.0, as obtained from the model fitting by the Hill equation. The sorption kinetics for both heavy metals on the material was fast, with adsorption equilibrium established in 60 min and 30 min for Pb(II) and Cr(VI), respectively. Model fitting of the kinetic data showed that Pb(II) and Cr(VI) sorption on Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI followed the pseudo-second-order model. This material had good selectivity for competing ions, and still hold fairly good binding capacities after 5 times of regeneration. Adsorption mechanisms for Pb(II) and Cr(VI) by Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI were proposed by analyzing FTIR, XPS and the electrokinetic property of the material. Specifically, Pb(II) adsorption on Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI could be attributed to chelation of Pb(II) with the imine/amine functional groups in the material’s matrix, while Cr(VI) adsorption might stem from a combination of electrostatic attraction, chelation and redox reaction. It seems that Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI could be used as a green and environmental-friendly material for heavy metals removal, particularly from acidic water streams.

CAS / MDL: 68-12-2 111-30-8
研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ELECTROANALYSIS · 2019 ·Vol. 32 ·期 3 ·462-469 · IF 2.691

Highly Sensitive and Selective Detection of Pb(II) by NH2−SiO2/Ru(bpy)32+−UiO66 based Solid-state ECL Sensor

Xiaomeng Shan,Tao Pan,Yuting Pan,Wenchang Wang,Xiaohui Chen,Xueling Shan,Zhidong Chen

In this study, a novel electrochemiluminescence (ECL) sensor for highly sensitive and selective detection of Pb(II) was developed based on Ru(bpy) 3 2+ encapsulated UiO66 metal-organic-framework (Ru(bpy) 3 2+ −UiO66 MOF) and −NH 2 group functionalized silica (NH 2 −SiO 2 ). The NH 2 −SiO 2 with large surface area provided an excellent platform for the ECL sensor. As numerous exposed carboxyl groups were present on UiO66 backbone, the Ru(bpy) 3 2+ −UiO66 could be steadily immobilized to NH 2 −SiO 2 by forming amide bonds. Meanwhile, the introduced UiO66 MOF which used for the encapsulation of Ru(bpy) 3 2+ , significantly enhanced the ECL efficiency of the proposed sensor, as it possessed a large specific surface area and porosity for the loading of Ru(bpy) 3 2+ . Moreover, a high quenching effect on ECL intensity was obtained in the presence of Pb(II) in the electrolyte. Under the optimal conditions, the quenched ECL intensity showed a good linear relationship within Pb(II) concentration in the range from 1.0×10 −6 to 1.0×10 2 μM, with a detection limit of 1.0×10 −7 μM ( S / N =3). The proposed sensor for Pb(II) detection was simple in operation, rapid in testing, stable in signal, and showed a good anti-interference ability to some other metal ions. Besides, its application for detecting Pb(II) in a real sample was also investigated here. This work provides a potential platform for metal ions detection in environmental monitoring field.

研究领域: 分析化学 · 环境科学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMOSPHERE · 2023 · IF 8.8

Building of soft-hard compound brush in porous PVA/NH2@TAtZnO plural gel and the high-efficiency anti-interference removal on Pb(II)

Lingli Liu,Sheng Xu,Zhenxi Wang,Xiaoguang Chen,Meng Cao,Shangxi Zhang,Yang Liu,Jinlong Cui

In order to promote the heavy metal ions removal of porous gel adsorbent and protect the adsorbent from other pollutants in wastewater, the tetrapod ZnO whiskers (tZnO) modified by amino-chain brush was introduced into the polyvinyl alcohol (PVA) matrix to prepare the PVA/NH 2 @TAtZnO composites with brush structure for toxic Pb(II) removal. The adsorption property, adsorption process and adsorption mechanism were studied by adsorption isotherms, adsorption kinetics, adsorption thermodynamics, SEM-EDS analysis and XPS analysis. And the anti-interference ability and anti-interference mechanism were researched by SEM-EDS analysis and XPS analysis. It was found that the PVA/NH 2 @TAtZnO composites displayed a soft-hard compound pore-brush structure and showed a good selective adsorption on Pb(II). The research of isotherms and kinetics indicated that the adsorption process was fitted well to Langmuir model and pseudo-second-order model, respectively, and the research of thermodynamics revealed the endothermic nature. The adsorption mechanism was inferred as the combination of predominant chemisorption and subsidiary physisorption. Comparing with the neat PVA matrix, the PVA/NH 2 @TAtZnO composites displayed a good anti-interference property on Pb(II) adsorption and showed an alleviative clogging pore-canal structure in the wastewater with SiO 2 NPs or PAC flocculants . The anti-interference intensity ΔQ and anti-interference factor χ were proposed to reflect the anti-interference ability of this adsorbent which was promoted with the increasing amino brush length or density. By the analysis of SEM-EDS and XPS, the anti-interference mechanism was explored as the steric-hinerance effect of tZnO hard brush to suspended SiO 2 NPs pollutant and the coordination effect of functional amino soft brush to soluble PAC pollutant. Besides, the prepared PVA/NH 2 @TAtZnO adsorbent possessed a good reusability under multiple adsorption-desorption processes and also presented a well applicability in real water matrix. The research indicated the huge potential of prepared PVA/NH 2 @TAtZnO adsorbent in heavy metal ions removal.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
TEXTILE RESEARCH JOURNAL · 2022 · IF 2.455

Construction of a novel hydrogel composite with polylactic acid nonwoven fibers: rapid and effective removal of Pb(II) and Ni(II)

Zhi-Ke Wang,Ting-Ting Li,Hai-Tao Ren,Hao-Kai Peng,Bing-Chiuan Shiu,Jia-Horng Lin,Ching-Wen Lou

In this study, a hydrogel composite adsorbent structure was reported and showed satisfactory adsorption performance. The study uses polylactic acid melt-blown nonwoven fabric to optimize and improve the adsorption performance of the hydrogel. The results show that the nonwoven fabric structure enables the composite material to reach the swelling equilibrium faster than the hydrogel. The adsorption-isotherm model found that the adsorption capacity of composite materials Pb(II) and Ni(II) reached 416.07 and 243.10 mg/g, respectively, and still had high removal efficiency at low pH. The composite material has low cost and can be reused, which solves the problems of difficulty in recovery of the hydrogel adsorbent, low strength, and easy damage, and promotes the industrialization of the hydrogel as an adsorbent.

研究领域: 环境科学 · 材料科学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR LIQUIDS · 2020 · IF 5.065

Development of mercaptosuccinic anchored MOF through one-step preparation to enhance adsorption capacity and selectivity for Hg(II) and Pb(II)

Chen Wang,Guo Lin,Yunhao Xi,Xiteng Li,Zhen Huang,Shixing Wang,Jiling Zhao,Libo Zhang

A novel Zr-MOF adsorbent was synthesized by one-step method and was used to selectively adsorb Hg(II) and Pb(II) from wastewater. The adsorbent can reduce the concentration of mercury and lead to less than the national standard (Hg is 50 μg/L and Pb is 1 mg/L). The entire adsorption process conforms to the pseudo second-order kinetic and Hill isotherm models. At pH 4, the adsorbent removed more than 90% of mercury (to 22 μg/L) and lead (to 0.732 mg/L) in 10 min and 960 min, and the maximum adsorption capacity was 1080 mg/g and 510 mg/g, respectively. In addition, the practical application in wastewater proved that the adsorbent can selectively adsorb Hg(II) and Pb(II) from the mixed ion solution and it still meets national standards for wastewater discharge. The research of repeated experiments proves that the adsorbent can be used repeatedly. The adsorption mechanism was clarified by FTIR, XPS spectroscopy before and after adsorption, and density functional theory (DFT) calculation. In summary, the adsorbent is stable in aqueous solution and has great potential for the efficient removal of trace heavy metal ions (mercury and lead) in future treatment of wastewater.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
International Journal of Electrochemical Science · 2023 · IF 1.5

Multi-walled Carbon Nanotubes Modified Screen-Printed Electrode Coated Bismuth Oxide Nanoparticle for Rapid Detection of Cd(II) and Pb(II)

Hao Cui,Qingde Li

Paint has a variety of excellent properties containing anti-corrosion, waterproof, oil-proof, chemicalresistant, light-resistant, temperature-resistant. The wooden furniture covered with paint is commonly used to ensure their excellent quality. However, the soluble heavy metals in the paint exist on the surface of wooden furniture, endangering human health when they are enriched in human bodies. Therefore, an effective detection method is needed to analyze the contents of heavy metals in wooden furniture. Here, we designed and manufactured a disposable screen-printed electrode (SPE) for the Cd(II) and Pb(II) determination through square wave anodic stripping voltammetry, which used a special printed ink mixed multi-walled carbon nanotube and coated with bismuth oxide nanoparticle (BONP-MSPE). The characteristics of BONP-MSPE were studied using cyclic voltammetry, electrochemical impedance spectroscopy and square-wave stripping voltammetry, and then the detecting conditions were optimized. Under the optimal conditions, the values of peak currents of Cd(II) and Pb(II) increased linearly with the concentrations of Cd(II) and Pb(II). The linear ranges were from 0.5 to 40 μg/L for Cd(II) and 0.5 to 40 μg/L for Pb(II), with detection limits of 0.5 μg/L and 0.05 μg/L (S/N = 3), respectively, Lastly, the BONP-MSPE was further employed to measure the contents of Cd(II) and Pb(II) in pint samples analysis.

CAS / MDL: 1304-76-3
研究领域: 分析化学 · 环境科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。