ADVANCED POWDER TECHNOLOGY
·
2014
·
IF 1.642
Renping Cao,Kangbin Chen,Qianglin Hu,Wensheng Li,Hui Ao,Chunyan Cao,Tao Liang
A series of Sr (1 − x − y − z ) MoO 4 : x Eu 3+ , y Bi 3+ , z R + (R + = Li + , Na + , and K + ) phosphors are prepared through solid-state reaction method in air. Eu 3+ doped SrMoO 4 phosphor can show red emission at ∼616 nm under excitation 275 nm and 397 nm light due to the 5 D 0 → 7 F 2 transition of Eu 3+ ion, and its emission intensity can be enhanced after co-doping Bi 3+ owing to energy transfer between Bi 3+ and Eu 3+ ions. The mechanism of energy transfer is discussed by the schematic energy level diagrams of Bi 3+ and Eu 3+ ions. The optimal composition in Eu 3+ and Bi 3+ co-doped SrMoO 4 phosphors is determined to be (Sr 0.92 Eu 0.05 Bi 0.03 )MoO 4 . The emission intensity of SrMoO 4 :Eu 3+ , Bi 3+ phosphor is found to be further improved by using Li + , Na + , and K + ions as charge compensators. These experiment results in the paper are helpful to develop novel and high-efficiency phosphors for white light-emitting diodes.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2024
·
IF 8.1
Lina Wang,Hanpei Yang,Qiangshun Wu,Rui Ma
Photocatalysis-self-Fenton system, integrating photocatalysis with Fenton technology, emerge as promising approaches for environmental remediation. In this study, we introduced K, Na doped g-C 3 N 4 /FeOCl (DCN/FeOCl) catalyst, where amino groups on the DCN surface interacted with unsaturated Fe on FeOCl, forming Fe–N bonds and a Z-scheme heterojunction . The resulting DCN/FeOCl demonstrated efficient H 2 O 2 production and rapid tetracycline (TC) degradation under visible light. The Z-scheme heterojunction and nitrogen vacancy enhanced electron-hole pair separation and O 2 adsorption. Additionally, we proposed a mechanism for dual-channel photocatalytic H 2 O 2 production. This work presents a novel strategy for in-situ H 2 O 2 production and activation, facilitating water decontamination .
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2024
·
IF 4.8
Hao Zhou,Zhe Hong,Lijiao Ma,Yingyuan Tan,Jingcheng Xu,Wenzhi Jia,Junhui Li
The experiments of the adsorption removal of CS 2 impurity from a mimetic coke oven gas were performed by using a series of Na-type zeolites as adsorbents. Combining with the diffusion & simulation calculations and several characterizations, it's found both the development degree and the diffusion ability of microporous systems significantly influence the adsorption performance of these Na-type zeolites on which the physical absorption was predominant for CS 2 molecules. Firstly, compared with NaZSM-5 or NaSAPO-34, the NaY with FAU-type framework exhibited a much higher breakthrough adsorption capacity, primarily due to its much higher microporous surface area & volume and larger-size channels, which ensured a broader adsorption space, a high-efficiency molecule-diffusion and a high adsorption utilization of micropores. Secondly, alkali-treatment introduced some mesopores into NaZSM-5 crystals but also resulted in a declined integrity of microporous structure, causing an obvious decline of adsorption performance. Thirdly, the nano-crystal NaZSM-5 or NaY exhibited a much higher breakthrough adsorption capacity than that of the corresponding micron-crystal zeolite, primarily attributed to both the increased microporous surface area & volume and the shortened micropore diffusion-path length of the former. In addition, a breakthrough adsorption capacity of up to 0.251 g/g was obtained in the first adsorption use of a nano-NaY-0.909 sample at 298 K, and it's 0.229 g/g in even the sixteenth time of operation (by then, total adsorption service hours were 80.58 h). Our work may provide an important reference for developing high-performance adsorbents for removing gaseous CS 2 impurity in coke oven gas.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2024
·
IF 12.2
Bo Ran,Ping Hu,Jun Sun,Jialu Fang,Qihua Sun,Juqi Wang,Yuqing Zhu,Ning Tian,Zhaofeng Wu,Haiming Duan
In this study, biomass-derived carbon material obtained from Lyocell fibers was first utilized as a gas sensor. The impacts of varying pyrolytic carbonization temperatures and pregrinding treatments on the structure, surface morphology, elemental composition, and gas sensitivity of the samples were thoroughly examined. The CL-500 sensor can realize rapid detection of trimethylamine with a high response (12.79k%, 500 ppm) and high selectivity at room temperature; the response/recovery times are 10 s and 2 s, respectively, and the theoretical detection limit is 3.96 ppm. Moreover, after four months, the response of the CL-500 sensor to trimethylamine fluctuated by less than 9.7 % compared with that of the fresh sensor, indicating good stability. It also shows good recovery after seven consecutive response-recovery cycles. Additionally, the CL-500 sensor has promising applications in real-life fish freshness monitoring. Theoretical calculations indicate that the introduction of trace amounts of Na enhances the sensing performance of this sensor for target gases. This study serves as a guide for developing cost-effective, high-performance gas sensors, promoting the efficient and high-value utilization of biomass waste.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Energy Materials
·
2024
·
IF 24.4
Xiecheng Yang,Dantong Zhang,Lanqing Zhao,Chao Peng,Kun Ren,Changfan Xu,Pan Liu,Yingjie Zhou,Yong Lei,Bin Yang,Dongfeng Xue,Feng Liang
Rechargeable Na-CO 2 batteries are considered to be an effective way to address the energy crisis and greenhouse effect due to their dual functions of CO 2 fixation/utilization and energy storage. However, the insolubility and irreversibility of solid discharge products lead to poor discharge capacity and poor cycle performance. Herein, a novel strategy is proposed to enhance the electrochemical performance of hybrid Na-CO 2 batteries, using water-in-salt electrolyte (WiSE) to establish an optimal reaction environment, regulate the CO 2 reduction pathway, and ultimately convert the discharge product of the battery from Na 2 CO 3 to formic acid (HCOOH). This strategy effectively resolves the issue of poor reversibility, allowing the battery to exhibit excellent cycle performance (over 1200 cycles at 30 °C), especially under low-temperature conditions (2534 cycles at −20 °C). Furthermore, density functional theory (DFT) calculations and experiments indicate that by adjusting the relative concentration of H/O atoms at the electrolyte/catalyst interface, the CO 2 reduction pathway in the battery can be regulated, thus effectively enhancing CO 2 capture capability and consequently achieving an ultra-high discharge specific capacity of 148.1 mAh cm −2 . This work effectively promotes the practical application of hybrid Na-CO 2 batteries and shall provide a guidance for converting CO 2 into products with high-value-added chemicals.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Science
·
2025
·
IF 14.1
Zhengrong Chen,Wenxin Yang,Yong Tang,Qianqian Dong,Kui Huang,Jiulin Tan,Jie Zhang,Juan Cai,Qixiu Yu,Qijie Dai,Jianzhong Xu,Shuquan Guo,Ce Dou,Fei Luo
Osteoporotic bone defects are challenging to repair due to imbalances in bone resorption and formation, coupled with insufficient vascularization. To address these issues, it develops a trifunctional hydrogel (SF-ZIF@NA) designed to selectively inhibit osteoclast activity and enhance vascularized bone regeneration. By enzymatically removing sialic acid, SF-ZIF@NA prevents precursor osteoclasts (pOCs) from fusing into bone-resorbing mature osteoclasts (mOCs), thereby preserving pOCs and their anabolic functions. Additionally, the hydrogel releases Zinc ion (Zn 2 ⁺) in response to acidic conditions, promoting osteogenesis and angiogenesis. In vitro results confirmed that SF-ZIF@NA impedes osteoclast fusion, enhances platelet-derived growth factor-BB (PDGF-BB secretion from pOCs, and activates the FAK (focal adhesion kinase) signaling pathway to stimulate vascularized bone formation. In osteoporotic bone defect models, SF-ZIF@NA accelerated bone repair with increased bone density and vascularization. These findings demonstrate that SF-ZIF@NA offers a targeted and multifunctional strategy for osteoporotic bone regeneration by concurrently modulating osteoclast activity and promoting angiogenesis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2025
·
IF 5.5
Xinran Li,Yuwei Zhong,Habib Ullah,Jian Luo,Lee Li,Ghafar Ali,Alaa G. M. Osman,Xiujian Zhao,Yi Xie
The intrinsic structural lability and limited processability of inorganic halide perovskites heavily hamper their commercial applications. Herein, we develop a facile and scalable room-temperature (RT) water-based procedure for the synthesis of Na–Cu-codoped CsPbIxBr3–x-embedded Pb(OH)I (denoted as the Na–Cu–CsPbIxBr3–x@Pb(OH)I) composite to overcome the above-mentioned bottlenecks. Compared to Na doping, the codoping with Na and Cu leads to a slight shift of the photoluminescence (PL) peak position from ∼612 to 622 nm, increases the PL intensity by 32.5 times, and improves the PL quantum yield from 1% to 5%. Notably, the optimized Na–Cu–CsPbIxBr3–x@Pb(OH)I composite displays outstanding stability under various harsh environments such as soaking in RT water or hot water (up to 90 °C) and annealing at high temperature, which indicates that Pb(OH)I can act as an effective water-blocking and protective encapsulation layer. It is more interesting that the photoluminescence (PL) intensity of Na–Cu–CsPbIxBr3–x@Pb(OH)I can be significantly increased to 2.17 and 1.29 times after soaking the sample in RT water for 35 and 105 days, respectively, and 1.25 times even after immersing in hot water (90 °C) for 6 h, indicating an improved optical property. Meanwhile, the crystal structure and emission wavelength are maintained. The insight of this work is quite beneficial for designing highly stable inorganic perovskite-based nanomaterials for realization in light-emitting devices and other optoelectronic devices.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jiayin Li,Wen Wen,Shuzhuo Bai,Jing Zhang,Chenyu Wu,Jintao Wu,QingQing Huang,Yalin Zhang,Chunyi Cai,Liyun Cao,Yijun Liu,Haibo Zhang,Hua Tan,Jianfeng Huang
The instability of the interfacial structure during the synthesis of iron carbodiimide (FeNCN) leads to a decline in its electrochemical performance during cycling. By depositing FeF 3 particles on the surface of FeNCN, the in-situ transformation of this FeF 3 nanolayer into a FeF 2 nanolayer effectively utilizes the discharge product Fe 0 . This process constructs a mechanically stable sandwich-structured SEI film, thereby enhancing the stability of the FeNCN electrode interface. Consequently, the FeNCN electrode exhibits a capacity of 350.54 mAh g −1 after 2000 cycles at 2 A g −1 , with a capacity retention rate of 99.54 %. This strategy provides crucial theoretical and technical insights for regulating carbodiimide-based materials to achieve stable, long-cycle performance in electrode materials.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2025
·
IF 2.1
Ruxue Yao,Yang Ge,Jiangtao Song,Fei Yuan,Yafei Guo,Tianlong Deng
The Qaidam Basin has potassium- and calcium-rich oil field brine resources at high temperatures. Since the phase diagram is a powerful tool to guide the separation and purification of inorganic chemical engineering for the development of potassium resources in oil field brine, the quaternary oil field brine system (Na+, K+, Ca2+//Cl– -H2O) and its two subsystems ((Na+, Ca2+//Cl– -H2O) and (K+, Ca2+, //Cl– -H2O)) at 338.15 K were reported for the first time by the isothermal dissolution equilibrium method. The compositions of the equilibrium solid phases were analyzed and identified by combined chemical analyzing and X-ray diffraction. The quaternary system has four crystallized regions corresponding to NaCl, KCl, KCl·CaCl2, and CaCl2·2H2O at 338.15 K, and the incongruent double salt KCl·CaCl2 occurred at 338.15 K. The study facilitates the enrichment of thermodynamic data and exploits brine-based potassium resources.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Energy & Fuels
·
2025
·Vol. 9
·期 4
·1062-1072
·
IF 4.1
Minghui Cao,Miao Cui,Yiping Gong,Zewei Guo,Shuangqing Le,Jingyang Tian,Yuanping Jiang,Zulipiya Shadike,Chong Lin
The unstable anionic redox reactions (ARRs) in high-energy Na layered cathode materials result in sluggish ARR kinetics and inadequate structural stability, ultimately leading to rapid capacity degradation and unfavorable rate capabilities. In this work, a high entropy layered oxide P2-Na0.66Mn0.6Li0.1Ti0.1(MgAlCuZn)0.05O2 (NMLTMACZ), was synthesized using a solid-state reaction method to achieve a stable phase structure. Such a novel NMLTMACZ cathode with O redox exhibits an exceptionally high initial reversible capacity of 245.56 mA h g−1 at 0.05C, with an unsatisfactory capacity retention of ∼58.56% after 100 cycles at 0.1C. However, the P2-NMLTMACZ cathode shows an outstanding rate capacity of 147.18 mA h g−1 and superior cycling stability with ∼84.63% capacity retention after 100 cycles at a high rate of 1C. The significant improvement in high-rate performance can be attributed to the robust structure, fast Na+-ion transport, and O-redox dynamics of the NMLTMACZ cathode, as evidenced by electrochemical impedance spectroscopy (EIS), ex situ X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) experiments. This study provides a new perspective on the design of high-capacity cathode materials with highly reversible ARR, demonstrating enhanced high-rate performance through rational lattice modulation.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Shibo Wu,Jingrui Cao,Yang Zhou,Jiahao He,Jiangjie Zhou,Muslum Demir,Hongye Yang,Zaizai Tong,Pianpian Ma
High-entropy perovskite oxides, an emerging electrocatalytic electrode material, integrates the distinctive features of high-entropy materials and perovskites, offering significant potential in electrocatalysis. While adjusting the B-site elements has been a widely adopted approach for modulating the electrocatalytic activity of HEPs, there was a notable lack of systematic investigations into the role of A-site ions in regulating their electrocatalytic performance. To overcome this deficiency, in the present study, La 1-x Na x (CrMnFeCoNi) 1/5 O 3 HEPs were synthesized using carbon nanotubes-based sacrificial template method. It was found that the Na substitution at the A-site not only significantly reduced the synthesis temperature but also facilitated the preservation of carbon nanotubes. This retention contributed to the formation of a three-dimensional network structure, exposing a greater number of active sites. The Na modification induced significant valence fluctuations at the B-site and tailored the oxygen vacancy concentrations, enhancing the synergistic "cocktail effect" among the various metal atoms. Furthermore, the introduction of Na stimulated the formation of surface M-OOH species, which serve as active intermediates to enhance OER activity. As a result, the Na-modified HEPs demonstrated exceptional OER performance compared to their parent phases. Among these, La 0.6 Na 0.4 (CrMnFeCoNi) 1/5 O 3 (L6N4-5M) sample exhibited a lower overpotential of 313 mV at a current density of 10 mA cm −2 and a Tafel slope of 47.4 mV dec −1 . Additionally, the A-site Na modification strategy and the in-depth investigation of the OER mechanism provide valuable insights for the future design and development of high-performance HEP electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2025
·
IF 4.5
Wujie Ge,Yuanxiang Fu,Chaonan Wang,Lirong Yan,Qi Feng,Bing Yan,Xiang Li
The high-nickel cathode material LiNi 0.865 Co 0.095 Al 0.04 O 2 (NCA) has garnered significant attention due to its high energy density and cost-effectiveness in production. However, this material is also prone to rapid capacity degradation, primarily due to phase transitions occurring during the redox process. In this paper, the co-modification with Na and B cations is employed to stabilize the lattice structure and enhance the electrochemical performance of the NCA material. It can be found that the incorporation of Na and B cations in the lattice can reduce cation mixing, expand the Li-layer spacing and improve crystal stability, thereby increasing the specific capacity and cyclic stability of the NCA material. Specifically, the co-doped NCA-2 sample exhibits a specific capacity of 202.1 mAh/g at 0.1 C and maintains a capacity retention of 78.75 % at 1 C after 300 cycles, representing a substantial improvement over the pristine material (187.2 mAh/g and 61.68 % capacity retention). Moreover, at a current density of 10 C, the co-doped NCA-2 sample demonstrates a high specific capacity of 133.9 mAh/g, compared to 110.1 mAh/g for the pristine material. The Na/B co-doping strategy presented in this study offers a straightforward method to improve the cyclability and rate behavior of cathode materials, highlighting its potential for commercial applications.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）