COMPOSITES COMMUNICATIONS
·
2025
·
IF 7.7
Ke Zhang,Minghui Ou,Yujie Xiao,Zhiwei Wei,Li Yang,Yi Xie,Changsheng Zhao
Copper-based nanozymes have emerged as promising therapeutic agents for oxidative stress-related diseases due to their enzyme-mimicking properties. However, their development is still limited by poor biocompatibility, insufficient broad-spectrum free radical scavenging ability, and potential toxicity from Cu 2+ leakage. To address these challenges, we developed Cu@EA-BTC, a broad-spectrum antioxidant material, by integrating ellagic acid (EA) into copper-based metal-organic frameworks (Cu@BTC). The Cu@BTC serves as a stable copper source, while the EA endows the Cu@EA-BTC with broad-spectrum ROS scavenging and enhanced catalase (CAT)-like activity via facilitating the reduction of Cu 2+ to Cu + . As a result, the Cu@EA-BTC exhibits superior antioxidant properties and excellent biocompatibility, including both cellular and blood compatibility. Meanwhile, the Cu@EA-BTC effectively protects immune cells from oxidative damage, which indicates its potential for oxidative stress-related therapies. This study provides a promising strategy for developing safe and efficient nanozyme-based antioxidant materials for biomedical applications.
✓ 已验证
产品关联
DOI
高影响因子
Energy & Environmental Science
·
2024
·
IF 32.4
Liqun Wang,Jingting Jin,Wenzhi Li,Cunshuo Li,Leyu Zhu,Zheng Zhou,Lulu Zhang,Xia Zhang,Liang Yuan
Direct conversion of methane into high value-added products is of great practical significance. The synergistic effect in catalysts with dual-active components show potential to increase the methanol yield and selectivity. In this work, Cu–Pd/anatase is in situ generated and exhibits a relatively high methanol yield rate of ∼31 800 μmol gcat−1 h−1 and near-exclusive selectivity of liquid products (methanol). The reaction mechanism behind the heterogeneous catalysis process has been investigated. It is confirmed that copper ions hold the ability to produce hydrogen peroxide which can be further promoted by anatase. Chlorine ions can promote the stable adsorption of CO and the formation of *CH3 intermediates, facilitating high activity and selectivity for methanol production. Pd and Cu cooperatively dissociate methane, which promotes the formation of key configuration metal-CH3. The ˙CH3 intermediate desorption will be facilitated on Cu–Pd/anatase through the manner of electron regulation, which is proved by the combination of density functional theory calculations and in situ infrared spectroscopy. Methanol is formed when a ˙CH3 is desorbed from a copper site and combines with a hydroxyl radical.
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2020
·Vol. 64
·期 5
·1087-1094
·
IF 6.098
Wang Rui,Shi Faxing,He Xin,Shi Jinqiang,Ma Tao,Jin Song,Tao Zhanliang
The uneven deposition of lithium (Li) on current collectors causes serious dendrite growth and volume expansion. Commercial foamed copper (Cu) current collectors are unsuitable for Li anodes because of their large volume and mass and lithiophobic nature. Herein, a three-dimensional (3D) copper@tin (Cu@Sn) nanocone current collector with small volume, light weight, and lithiophilic nature was prepared by a simple electrodeposition method. The synergy of the nanoconical structure and lithiophilic Sn promotes the even deposition of Li and effectively inhibits the formation of Li dendrites. The resultant half batteries exhibit high Coulombic efficiency of 97.6% after 100 cycles at 1 mA cm −2 , and the symmetrical Li battery demonstrates a prolonged lifespan of over 600 h at 1 mA cm −2 . The full battery based on organic liquid electrolyte with LiFePO 4 also exhibits a long lifespan of 550 cycles with high capacity retention of 95.1% at 1 C. Moreover, 3D Cu@Sn nanocone-based solid-state batteries exhibit excellent electrochemical performance and show no decay after 500 cycles at 1 C. Our work provides a strategy for fabricating 3D current collectors for high-energy-density Li metal batteries.
✓ 已验证
DOI
高影响因子
RENEWABLE ENERGY
·
2020
·
IF 6.274
Yunwu Zheng,Jida Wang,Can Liu,Yi Lu,Xu Lin,Wenbin Li,Zhifeng Zheng
To eliminate the problematic need for liquid phase, high temperature, and high pressure, as well as the excessive consumption of hydrogen and production of aromatic hydrocarbons, associated with traditional aviation oil preparation processes, Ni–Cu bimetallic catalysts were synthesized and evaluated for ex situ catalytic pyrolysis vapor upgrading of oleic acid under a N 2 atmosphere. The effects of catalyst support (AC, Al 2 O 3 , ZrO 2 , HZSM-5, HUSY, Hβ and MCM-41), pyrolysis process parameters (pyrolysis temperature, catalytic temperature and amount of oleic acid injected), and the mixing ratio of modified metals (Ni:Cu = 0:1,2,1:1,1:2,1:0) on the catalytic conversion of oleic acid to high-quality chemicals were studied. The catalysts were characterized by XRD , BET and NH 3 -TPD. Modified bimetallic catalysts show great potential for green diesel production without the use of H 2 feed. The abundance of Brønsted acid sites favors HDO routes (such as HZSM-5, HUSY, Hβ and MCM-41), while Lewis acid sites (such as ZrO 2 and Al 2 O 3 ) favor hydrogenation and decarbonylation reactions. The addition of Cu enhances the reducibility of Ni and inhibits the cracking reaction and deactivation caused by coke. The addition of Ni effectively promotes the conversion of oleic acid, accelerates the fracture of C–C and effectively improves the production of hydrocarbons. The highest conversion was 100% with 85.68% selectivity towards hydrocarbons under pyrolysis at 450 °C, a catalytic temperature of 500 °C, and a feed quantity of oleic acid of 0.25 ml/min using Ni–2Cu/MCM-41 catalysts, and the oxygen removal efficiency and selectivity of C17 hydrocarbon were the highest (85.68% and 26.77%, respectively). The main products were olefins . In addition, the regenerated catalyst had good stability and could be used for at least 3 reaction cycles without observation of significant deactivation.
✓ 已验证
产品关联
DOI
高影响因子
Water
·
2023
·Vol. 16
·期 1
·121
·
IF 3.4
Xiaoze Yin,Huaqin Yin,Renjie Wang,Jinnan Wang,Aimin Li
Novel Fenton-like catalyst HKUST-1(Cu)/MoS2-3-C with a non-equilibrium-state surface was constructed for selective degradation of phenolic contaminants. Electron-polarized distribution facilitated the formation of σ-Cu-ligand between electron-poor Cu centre and phenolic compounds, which not only enhanced radicals generation but also accelerated the Cu(I)/Cu(II) redox. Meanwhile, ≡Mo–OOSO3−complexes formed by the electron-rich Mo centre and peroxymonosulfate (PMS), could directly oxidize phenolic contaminants with the generation of SO4•−. The radical quenching experiments and EPR tests indicated that both SO4•−and•OH played a dominant role in the reaction. Additionally, O2could be reduced to O2•−by OVs and subsequently converted into1O2over the Mo centre. DFT calculation, FT-IR, and in situ Raman spectra analysis results demonstrated that phenolic compounds and PMS were respectively adsorbed by electron-poor Cu centre and electron-rich Mo centre, favouring the electrons transfer from phenolic contaminants to Mo centre for PMS activation. With synergistic effects of σ-Cu-ligand and ≡Mo–OOSO3−complexes, HKUST-1(Cu)/MoS2-3-C achieved a high degradation rate of phenolic contaminants and utilization efficiency of PMS.Keywords:fenton-like catalyst;non-equilibrium-state surface;σ-Cu-ligand;≡Mo–OOSO3−complex;phenolic contaminants degradation
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 14
·1093
·
IF 3.2
Ren Peifeng,Gao Xingchen,Fan Wenhao,Zhang Qiang,Chen Shaoping,Fan Jianfeng
Elemental doping plays a crucial role in optimizing carrier concentration and suppressing lattice thermal conductivity in thermoelectric materials. In this study, Cu atoms were doped in both n- and p-type Mg 3 Sb 2 -based thermoelectric compounds. The results indicate that the incorporation of Cu effectively improves the electrical transport properties of Mg 3 Sb 2 -based thermoelectric compounds while simultaneously suppressing their thermal transport, ultimately achieving enhanced thermoelectric properties: (a) For p-type Mg 3 Sb 2 , a small quantity of Cu atoms provides electrons in the lattice interstitial and thus compensates holes, leading to a decreased carrier concentration and electrical conductivity. However, with increasing Cu content, Cu atoms preferentially occupy Mg2 sites, thereby increasing hole concentration, and thus improving electrical conductivity. Further increasing Cu content, an MgCuSb secondary phase forms, which is unfavorable for overall p-type thermoelectric performance of the Mg 3 Sb 2 -based matrix due to the n-type transport of the MgCuSb compound. (b) For n-type Mg 3 Sb 2 , no such secondary phase was observed despite the same Cu-doping content, which involves a distinct doping mechanism from the p-type one. Consequently, the zT values of p-type Mg 3 Sb 2 materials are improved by 17%–33% over the whole temperature range. And regarding the n-type Mg 3 Sb 2 materials, the highest peak zT value of ~1.4 and average zT avg of ~1.04 are achieved. Therefore, the doping of the Cu element proves to be an effective way in optimizing thermoelectric properties of both p-type and n-type Mg 3 Sb 2 -based materials.
✓ 已验证
DOI
高影响因子
Science Advances
·
2026
·Vol. 12
·期 29
·
IF 13.9
Qixing Zhang,Jing Gao,Muchen Li,Ying Yang,Guanlan Chen,Han He,Xingfei Chen,Xiaobing Gu,Yajun Gao,Yongcai He,Bo He,Xixiang Xu,Zhenguo Li,Ying Zhao,Lijun Zhang,Michael Grätzel,Xiaodan Zhang
Solar-driven electrochemical CO 2 reduction to multicarbon (C 2+ ) products presents a promising avenue for artificial photosynthesis, yet remains constrained by high overpotentials and limited conversion efficiency. Here, we developed an alkaline environment-modulated prereduction strategy that capitalizes on the divergent thermodynamic stabilities of precursors, enabling the precise synthesis of iodine-doped copper nanotopologies (Cu-I NTs). Featuring tunable under-coordination defects and stabilized high-energy adsorption sites, the Cu-I NTs achieve an onset potential of only −0.37 V versus the reversible hydrogen electrode for C 2+ formation. Operando Raman measurement and density functional theory calculation reveal that the tailored surface topologies favor Cu-CO rotation adsorption, enabling dynamic reorientation from bridge- to atop-binding configurations, which collectively lowers the barrier for CO-CO coupling. Impressively, powering the electrolyzer by a perovskite/silicon tandem together with a single-junction silicon photovoltaic device, the system delivers a photocurrent of 12.34 mA cm −2 at 2.17 V under standard AM 1.5 illumination, achieving a solar-to-C 2+ conversion efficiency of 8.64%.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2026
·
IF 7.8
Yunfeng Lei,Huilin Liu,Shunxiang Wang,Fu Ze Ho,Wen Da Oh,Yong Foo Wong,Yongjin Zou,Yong Shen Chua
Hydrazine borane (N 2 H 4 BH 3 ) has been recognized as an attractive hydrogen storage material owing to its high hydrogen capacity of 15.4 wt%. However, the methanolysis of N 2 H 4 BH 3 remains a challenge, as only BH 3 moiety of N 2 H 4 BH 3 can be utilized to produce H 2 . In the present work, we reported an efficient Cu@Ni/MoO 3 core–shell catalyst that is capable of fully utilizing the H atoms on both BH 3 and N 2 H 4 moieties of N 2 H 4 BH 3 via methanolysis, releasing 5.5 equivalents of gas at 50 °C. This study represents the most efficient catalyst for methanolysis of N 2 H 4 BH 3 reported to date. The improved catalytic activity of Cu@Ni/MoO 3 catalyst may be attributed to the collective improvement on the catalyst, which includes increased specific surface area of the catalyst, formation of an electron deficient Cu@Ni catalyst surface induced by MoO 3 and favorable reacting environment involving KOH as a catalyst promoter. The development of low-cost and highly efficient catalysts may encourage the application of N 2 H 4 BH 3 as a promising hydrogen storage material.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·
IF 5.8
Yunying Wang,Yanyan Yu,Ying He,Yun Liu
Single-atom iron catalysts have emerged as promising mimics of oxidases; however, strategies to enhance their intrinsic catalytic activity remain underexplored. Herein, waste pitch and eggshells are utilized for fabricating high-performance nanozymes by coloading nanocopper and iron single atoms onto nitrogen-doped carbon nanotubes (Fe/Cu@NCNTs). It has been demonstrated that copper nanoparticles serve as a critical modulator, electronically tuning the iron sites, which increases the Fe2+/Fe3+ ratio and promotes the formation of Fe–Cu nanoalloys. These synergistic effects significantly enhance the oxidase-like activity of the catalyst. The optimized Fe/Cu@NCNTs exhibit a 48.7% higher specific activity and superior substrate affinity compared with the Fe@NCNTs counterpart. Leveraging this enhanced catalytic performance, a smartphone-assisted colorimetric sensing platform was developed for the rapid visual detection of multiple analytes. Furthermore, by incorporating a three-channel sensor array (TMB, ABTS, and OPD) with pattern recognition analysis, the platform accurately discriminates between nine antioxidants at concentrations as low as 10 μM. This work not only provides valuable insight into the mechanistic role of copper in enhancing the oxidase-like activity of iron single-atom catalysts but also offers a versatile and high-throughput sensing platform that advances the application of nanozymes in complex sample analysis.
✓ 已验证
产品关联
DOI
高影响因子
ACTA PHYSICO-CHIMICA SINICA
·
2026
·
IF 13.5
Lulu Zuo,Di Li,Xinwei Li,Zhiyong Tang
The electrochemical nitrate reduction reaction (NO 3 RR) represents an attractive and sustainable strategy for simultaneously addressing nitrate contamination and producing value-added ammonia under ambient conditions. Compared with the energy- and carbon-intensive Haber-Bosch process, NO 3 RR offers a decentralized pathway for green ammonia synthesis powered by renewable electricity. However, achieving high ammonia selectivity remains challenging because nitrate-to-ammonia conversion involves a multistep proton-coupled electron transfer cascade, in which the initial two-electron reduction of nitrate to nitrite and the subsequent hydrogenation of nitrite-derived intermediates must proceed in a kinetically coordinated manner. In practice, this cascade is often hindered by reactivity mismatch between the upstream and downstream steps, resulting in nitrite accumulation, incomplete hydrogenation of NO x intermediates, and intensified competition from the hydrogen evolution reaction. Despite the conceptual promise of tandem catalysis, a practical framework for quantifying and optimizing such kinetic matching remains insufficiently developed. Here, we report a layered double hydroxide-derived Cu-Zn dual-site electrocatalyst in which the Cu/Zn ratio is used as a compositional lever to regulate cascade coordination during NO 3 RR in neutral electrolyte. Among the investigated compositions, Cu 1.5 Zn 1.5 Al-R exhibits the optimal balance between nitrate activation and subsequent hydrogenation, delivering a peak Faradaic efficiency of 95% for ammonia at −0.7 V vs. RHE, together with a high ammonia yield of 1526.0 mmol·g −1 ·h −1 . Time-dependent product analysis further shows that this optimal catalyst displays suppressed nitrite accumulation together with rapid ammonia formation, indicating an effective kinetic coupling between the consecutive reduction steps. Mechanistic studies based on online differential electrochemical mass spectrometry and in situ infrared spectroscopy reveal that the reaction mainly proceeds through a *NOH-mediated pathway. The results suggest that Cu-rich motifs are responsible for promoting nitrate adsorption and the initial two-electron reduction step, while Zn-associated motifs regulate the local hydrogenation microenvironment and facilitate the further hydrogenation of nitrite-derived intermediates near adjacent Cu sites. As a result, the Cu/Zn ratio serves as a key compositional parameter to balance the tandem reaction kinetics and improve ammonia selectivity. This work demonstrates that ratio-programmed Cu-Zn tandem catalysis is an effective strategy to enhance nitrate-to-ammonia conversion by kinetically matching the sequential elementary steps. The present study not only provides a viable catalyst design principle for selective NO 3 RR, but also offers useful insight into the regulation of multistep electrocatalytic reactions through compositional engineering.
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2026
·Vol. 132
·期 4
·336
·
IF 3
Du Xinli,Yu Jian,Ke Shaoqiu,Wei Mingxu,Dong Xiurong,Nie Xiaolei,Zhu Wanting,Wei Ping,Zhang Yu,He Danqi,Liu Mingrui,Hua Lin,Hu Zhili,Zhao Wenyu,Zhang Qingjie
Thermoelectric (TE) materials enable direct thermal-electric energy conversion, but Bi 2 Te 3 -based alloys suffer from limited thermoelectric performance and controversial doping mechanisms of Cu, hindering their practical application in waste heat recovery. To address these issues, this work designs and synthesizes a series of zone-melted p-type Bi 0.5 Sb 1.5*(1− x ) Cu 1.5* x Te 3 +3 wt % Te ( x = 0.0–2.0%) samples. The results show that Cu occupies interstitial sites, suppresses Te volatilization to increase the hole concentration, and enhances the electrical conductivity. Concurrently, lattice distortions and secondary phases reduced lattice thermal conductivity. The 1.0% Cu-doped sample achieves a maximum power factor of 4.74 mW·m − 1 ·K − 2 at 300 K, a peak zT of 1.03 at 412 K, and an average zT of 0.91 (300–500 K), representing improvements of 7%, 8.4%, and 18% over the undoped matrix. Subsequent hot deformation further reduced lattice thermal conductivity but did not enhance zT due to an anomalous rise in carrier concentration and decreased mobility. This study clarifies the interstitial Cu doping mechanism, providing a viable strategy for optimizing Bi 2 Te 3 -based materials.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Jibiao Wang,Jiansen Wang,Lingyun Yang,Houyu Zhu,Pornthip Tongying,Yuanxing Wang
Oxide-derived Cu nanowire arrays were developed for electrochemical CO 2 reduction. • Cu nanowire arrays are capable of producing syngas with a wide range of H 2 /CO ratios. • The tunable selectivity of catalysts was attributed to the grain boundaries in Cu. Electrochemical reduction of CO 2 to value-added fuels and chemical feedstocks, such as syngas, stands as an appealing solution for energy and environmental sustainability. Currently, it suffers from a lack of catalysts with good activity and selectivity. Herein, we have synthesized a series of oxide-derived Cu nanowire arrays (NAs) as catalysts for electrochemical CO 2 reduction. Copper oxides NAs were first synthesized by thermal oxidation and then electrochemically reduced. By adjusting the annealing temperatures, the obtained Cu NAs are capable of reducing CO 2 and H 2 O to produce syngas with a wide range of H 2 /CO ratios (from 2.5:1 to 0.7:1) at a low overpotential. First-principles calculations confirmed that the enhancement of CO 2 reduction and suppression of hydrogen evolution were attributed to grain boundaries in the Cu NAs. This research demonstrates a promising strategy for the development of Cu-based catalysts in tunable syngas production. Download: Download high-res image (187KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）