文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第613至624个,产品总数3,650个

设置提升方向
S)
Batteries & Supercaps · 2023 ·Vol. 6 ·期 7 ·e202300145 · IF 5.7

Highly Microporous Carbon from Enteromorpha for High-Performance Aqueous Zinc-chalcogen (S, SeS2) Batteries

Mengmeng Liu,Yan Zhang,Zhao Xu,Xuguang Han,Wenshan Gou,Yifei Sun,Chang Ming Li

Graphical Microporous biomass carbon : The Enteromorpha-derived nitrogen-doped highly microporous carbon (HMCs) was prepared by carbonization and activation. Due to the high specific surface area, rich pore structure and nitrogen doping of HMCs, HMCs-3@S/SeS 2 cathode exhibits excellent cycling stability and rate performance in aqueous Zn-chalcogen batteries. Rechargeable aqueous zinc-chalcogen batteries have become a rising star in the energy storage systems due to the high abundance, low cost and high theoretical specific capacity of the chalcogen cathodes (S, Se). However, there are still some challenges in its practical application, such as low utilization of active substances due to the poor conductivity of chalcogen and sizable volume changes during charging/discharging. In this work, for the first time, nitrogen-doped highly microporous biomass-derived carbon (HMCs-3) was synthesized as a sulfur-loaded cathode for aqueous zinc-chalcogen batteries. A high specific surface area (3349.4 m 2 g −1 ) and a wealthy micropore of HMCs-3 provide enough space to load the active substances and allow electrolytes to access reaction sites while well alleviating the volume changes of sulfur during the cycling process. As a cathode for aqueous zinc-chalcogen batteries, HMCs-3@S delivers a high reversible discharge capacity (591 mAh g −1 at 0.1 A g −1 ), an excellent rate capability (477 mAh g −1 at 3 A g −1 ) and good cycling stability (559 mAh g −1 after 100 cycles at 1 A g −1 ). The excellent performance of this biomass-derived carbon holds great promise for practical applications in aqueous zinc-chalcogen batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

Multi-perspective synergistic construction of dual-functional heterostructures for high-temperature Li-S batteries

Yiding Li,Qiang Zhang,Simin Shen,Siqi Wang,Liangliang Shi,Dequan Liu,Yujun Fu,Deyan He

Effectively limiting the shuttle effect is the key to improving the electrochemical performance of Li-S batteries. Here, the synthesis of WO 3 -WS 2 heterostructures is reported by electrospinning and in situ sulfurization strategies, combining the initial WO 3 nanoparticles with the sulfurization product WS 2 . It was found that the obtained bifunctional heterostructures enhance the electrolyte wettability, optimize intermediate regulation performance, accelerate Li + /e − diffusion, and thus exhibit excellent electrochemical characteristics in Li-S batteries. Through experiments and density functional theory (DFT) calculations, the WO 3 -WS 2 heterostructures were considered as a coupled creative solution with multiple advantages. Different from the batteries using single-component or single-configuration catalyst, the prepared Li-S batteries with the WO 3 -WS 2 heterostructures exhibited synergistic enhanced electrochemical performance and high-temperature crushing resistance. Even under severe conditions, including high sulfur loading (10.3 mg cm −2 ), lean electrolyte (5.8 μL mg −1 ), high current density (7.0 A g −1 ), extended cycling (1600 cycles), and high temperature (90 °C), the representative battery exhibited stable cycling performance.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ARCHIVES OF MICROBIOLOGY · 2023 ·Vol. 205 ·期 5 ·1-10 · IF 2.8

Synergistic antimicrobial effect of nisin−octanoic acid nanoemulsions against E. coli and S. aureus

Guo Hui,Yang Wei,Lei Bingshuang,Zhao Fengju,Guo Lili,Qian Junqing

Food safety is a major public health concern all over the world. Therefore, the prevention of food contamination is becoming extremely crucial. In this study, an antimicrobial nanoemulsion composed of water-soluble nisin and fat-soluble octanoic acid was successfully prepared. The results showed that the average particle size and the polymer dispersity index of the nisin−octanoic acid (NOA) nanoemulsion were around 52.21 nm and 0.253, respectively. The NOA nanoemulsion required less amounts of nisin and octanoic acid to achieve the effective antimicrobial effect against Escherichia coli and Staphylococcus aureus . In addition, the growth curves of E. coli and S. aureus were determined. The OD 600 of NOA nanoemulsion was significantly lower than free nisin after being incubated for 24 h ( p  < 0.001), indicating that the antimicrobial effect of NOA nanoemulsion was outstanding. Meanwhile, the synergistic antimicrobial property of NOA nanoemulsion against E. coli and S. aureus was significantly better than free nisin under nonacid conditions ( p  < 0.05). Overall, the results of this study may provide guidance for the further application of nisin in more forms.

CAS / MDL: 1414-45-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2023 · IF 6.2

Interface engineered Zn/Co-S@CeO2 heterostructured nanosheet arrays as efficient electrodes for supercapacitors

Dongdong Xu,Zhigao Xue,Lei Han,Kai Tao

Bimetallic sulfides with superior electrochemical activity are extensively explored as electrode materials for electrochemical energy related applications. However, their utilizations are impeded due to unfavorable faradaic reaction kinetics and poor electrochemical stability. To overcome these defects, this study reports interface engineering of heterogeneous nanosheet arrays on Ni foam (NF) through surface modification of metal-organic framework (MOF)-derived zinc cobalt sulfide (Zn/Co-S) with CeO 2 nanoparticles (NPs). MOF-derived porous Zn/Co-S nanosheets have highly exposed electrochemical active sites and abundant channels for charge transport. The strong interfacial coupling between Zn/Co-S and defective CeO 2 leads to fast charge transfer, thereby improving electrochemical activity. The CeO 2 can also prevent Zn/Co-S from degrading in KOH solution. Moreover, the self-supported electrode shows high electronic conductivity and strong adhesion with the conductive substrate. Therefore, the specific capacity and electrochemical stability of resulting Zn/Co-S@CeO 2 /NF are significantly higher compared with Zn/Co-S/NF. Furthermore, an asymmetric supercapacitor (ASC) based on Zn/Co-S@CeO 2 /NF and activated carbon (AC) exhibits high energy storage capability (42.4 Wh kg −1 ) and outstanding operating durability (91.1 % after 8000 cycles). These results demonstrate that the as-prepared electrode is a superior candidate for electrochemical devices .

CAS / MDL: 100-97-0 10196-18-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2023 · IF 4.6

N, S co-doped carbon film wrapped Co nanoparticles for boosting oxygen reduction reaction

Kexin Huang,Yanxing Hui,Zhongyun Yang,Muhammad Waqas,Fangfang Fan,Limin Wang,Xiaotian Liu,Qiulan Huang,Dujuan Huang,Du-Hong Chen,Youjun Fan,Wei Chen

Electrochemical energy (e.g., fuel cell and metal-air batteries) is featured by large theoretical energy density, high conversion efficiency, safe operation and pollution-free emission. However, the sluggish dynamics of oxygen reduction reaction (ORR) and high cost of noble metals hinder their widespread commercial applications in electrochemical energy devices. Herein, we present a method for the preparation of the N, S co-doped carbon film wrapped Co nanoparticles (Co/NSC) for ORR by aging and then pyrolyzing the mixture of cobalt salt and 1-(p-Toluenesulfonyl)imidazole. The co-doping of N and S facilitates the electron rearrangement of the carbon film, resulting in a rapid electron transfer. The core-shell structure enhances the interaction between N, S co-doped carbon film and Co nanoparticles. These features endow the Co/NSC catalyst an excellent ORR with a half-wave potential of 0.860 V and limiting current density of 6.2 mA cm -2 , besides the superior anti-methanol. The Co/NSC catalyst as the air cathode grants the assembled zinc-air battery high open circuit voltage (1.467 V), large peak power density (156.2 mW cm -2 ), great specific capacity (747.9 mAh g Zn -1 ), and excellent stability. Thus, the prepared Co/NSC catalyst exhibits a promising application in zinc-air battery. This work provides an approach for the synthesis of the carbon-shell coated non-noble metal catalyst and its subsequent applications in oxygen electrocatalysis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2023 · IF 8.4

In2O3/ZnO S-scheme heterojunction nanocomposite hollow microtubes with highly sensitive response to formaldehyde

Yu Peng,Bei Cheng,Liuyang Zhang,Jingjing Liu,Jiaguo Yu

As we all know, formaldehyde (HCHO) is extremely harmful to human health and has been identified as a primary carcinogen by the World Health Organization. Therefore, there is an urgent need to design efficient formaldehyde-sensing materials. In this work, a highly responsive formaldehyde sensor of In 2 O 3 @ZnO derived from MIL-68(In)@ZIF-8 precursor was successfully prepared. By adjusting the ratio of In 2 O 3 and ZnO, it can be found that the performance of the resulting sensor has greatly improved under 100 ppm HCHO at an operating temperature of 220 °C and the detection limit can be as low as 4 ppb. Additionally, it also has excellent selectivity (Q≥10), anti-interference (the deviation value≤3.5%), and long-lasting stability (the variation value≤4%). Such distinguished sensing performance can be attributed to the metal-organic framework (MOF) derived step-scheme (S-scheme) heterojunction , which ultimately increases the adsorption of oxygen and HCHO. This work verifies that ingenious heterojunction construction can significantly improve gas sensing performance.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2023 · IF 7.7

Reductive sequestration of Cr(VI) in soil and groundwater using Ca-Fe-S microparticles

Jianle Wang,Xueming Liu,Hong Deng,Dongye Zhao,Qiulin Yang,Zhihua Zhu

Various sulfur- and iron-bearing materials have been shown promising for reductive immobilization of Cr(VI) in water and soil. Yet, composite Ca-Fe-S materials and the effects of water chemistry and material aging have not been investigated. In this work, we prepared a type of Ca-Fe-S microparticles under the atmospheric conditions through a facile one-pot approach, and tested the particles for reductive immobilization of Cr(VI) in solution and soil. Ca-Fe-S showed 40 % higher removal efficiency of Cr(VI) in solution than FeSO 4 and 10 % higher than CaS x on the basis of equal molar dosage. When a Cr-laden soil was amended by Ca-Fe-S, the leachable concentration of Cr per the toxicity characteristic leaching procedure remained below the regulatory limit of 5 mg L −1 after 730 days of curing, while FeSO 4 and CaS x failed to meet the regulatory threshold. Ca-Fe-S served as a slow-releasing source of Fe 2+ and S 2- , which were able to convert Cr(VI) into the stable final product of Cr(OH) 3 . Ca-Fe-S was able to perform well under a wide range of pH (3.0–9.0) and in the presence of high concentrations of coexisting ions (5 mmol L −1 of Cl - , SO 4 2- , or HCO 3 - ). Moreover, the material remained effective when aged under the atmospheric conditions for 14 days. This study showed that Ca-Fe-S is a highly effective material for efficient sequestration of Cr(VI) in soil and groundwater under various water chemistry and materials aging conditions.

CAS / MDL: 7778-50-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHIMICA ACTA · 2018 ·Vol. 185 ·期 12 ·1-9 · IF 5.705

Fluorometric determination of hydroquinone by using blue emitting N/S/P-codoped carbon dots

Wang Yongping,Yue Qiaoli,Tao Lixia,Zhang Cong,Li Chen-Zhong

N/S/P-codoped carbon dots (CDs) are shown to be a viable fluorescent probe in a turn-off-on fluorometric assay for hydroquinone (HQ). The preparation of CDs was carried out using a one-step hydrothermal reaction starting with glyoxal and isocarbophos. The method is based on the formation of ground state complexes between CD and Fe(III) which leads to quenching of blue fluorescence (with excitation/emission peaks at 363/448 nm). On addition of HQ, it will be oxidized by Fe(III) upon which fluorescence recovers. This turn-off-on system can be utilized to quantify HQ. A linear relationship exists between fluorescence recovery and HQ concentration in range between 0.56 and 375 μM. The limit of detection is 0.16 μM. The assay was successfully applied to the determination of HQ in spiked water samples and developer samples. Fluorometric determination of hydroquinone (with good selectivity over catechol and resorcinol) by using blue-emitting N/S/P-codoped carbon dots and the quenching effect of Fe(III).

CAS / MDL: 10026-22-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SCIENCE OF THE TOTAL ENVIRONMENT · 2019 · IF 5.589

New perspective of Br−'s role on NDMA formation from daminozide (DMNZD) during ozonation

Xiaobin Liao,Xingji Bai,Huan Qi,Fei Li,Baoling Yuan

N-nitrosodimethylamine (NDMA) has recently been discovered to generate from daminozide (DMNZD) during ozonation . Moreover, its formation is affected by the presence of bromine ion (Br − ) in water, but the mechanism is still unclear. In this study, the effect of Br − on NDMA formation from DMNZD during ozonation at various oxidation conditions (ozone dosages, pH) and distinct water parameters was studied. In addition, the transformation pathways with/without Br − were determined. The results demonstrated that low levels of Br − promoted NDMA formation from DMNZD during ozonation. When Br − dosages increased from 0 to 1 μM, the concentration of NDMA augmented from 138 to 195.5 μg/L. However, when Br − concentration raised to 100 μM, NDMA amounts dropped to 80 μg/L. Increasing pH can raise the ratio of deprotonated DMNZD no matter with or without Br − , and promote its reaction with O 3 molecular to achieve the maximum NDMA formation at pH = 7. The amounts of NDMA decreased dramatically (from 155 to 74 μg/L) when HCO 3 – dosages increased from 0 to 160 μM with 0.1 μM Br − , however, its concentration increased remarkably (from 155 to 225 μg/L) with increasing SO 4 2− (from 0 to 20 μM). Low levels of HA (0.1–0.2 mg/L) boosted NDMA formation while relatively abundant of HA (≥0.4 mg/L) suppressed its formation. In addition, the presence of NOM inhibited NDMA formation from DMNZD during ozonation no matter Br − existed or not. Based on the results of LC/MS/MS, GC/MS and IC-MS, the transformation pathways of DMNZD with/without Br − during ozonation were proposed. This study provided new insights into the role of Br − on NDMA formation from typical amine compounds during ozonation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2019 · IF 4.084

Fluorene-containing poly(arylene ether sulfone nitrile)s multiblock copolymers as anion exchange membranes

Ao Nan Lai,Peng Cheng Hu,Jing Wei Zheng,Shu Feng Zhou,Lei Zhang

A series of novel fluorene-containing poly(arylene ether sulfone nitrile)s (FPESN-m/n) multiblock copolymers bearing 1,2-dimethylimidazole groups (ImFPESN-m/n) were synthesized for preparing anion exchange membranes (AEMs). Bromination rather than chloromethylation was used in this work. The bulky and rigid fluorene groups were introduced to force each chain apart to create large interchain spacing. Strong polar nitrile groups were introduced into the hydrophobic segments with the intention of enhancing the anti-swelling property of the AEMs. The length of fluorene–containing hydrophobic segment was varied to study the structure–property of the AEMs. With the ion groups anchored selectively and densely on the hydrophilic segments, all the AEMs exhibited well-defined hydrophilic/hydrophobic microphase-separated structures. As a result, the AEMs showed high hydroxide conductivities in the range of 35.2–118.3 mS cm −1 from 30 to 80 °C and superb ratios of ionic conductivity to swelling at 80 °C. Furthermore, the AEMs also exhibited good mechanical properties , thermal and alkaline stabilities.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CATALYSIS · 2019 · IF 7.723

Building MoS2/S-doped g-C3N4 layered heterojunction electrocatalysts for efficient hydrogen evolution reaction

Shuo Geng,Weiwei Yang,Yong Sheng Yu

Developing the stable and efficient hydrogen evolution reaction (HER) electrocatalyst is greatly desirable for the production of hydrogen as a clean energy resource. Herein, we report a simple and effective approach to fabricate MoS 2 /S-doped g-C 3 N 4 layered heterojunction electrocatalysts, which can adjust the electron structure, enhance the charge transfer rate and expose more active sites of MoS 2 for HER. The optimized MoS 2 -C 3 N 4 -60 sample shows a small onset overpotential as low as 115 mV, a low overpotential of 173 mV to achieve current density of 10 mA/cm 2 , a low Tafel slope of 53 mV decade −1 , and a high turnover frequency of 0.16 H 2  s −1 per active site at η = 150 mV. This finding proposes a new strategy to fabricate 2D layered heterojunction for enhancing HER performance by rationally coupling two similar layered materials.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2018 · IF 11.698

A superior active and stable spinel sulfide for catalytic peroxymonosulfate oxidation of bisphenol S

Haodan Xu,Da Wang,Jun Ma,Tao Zhang,Xiaohui Lu,Zhiqiang Chen

In this paper, for the first time the spinel sulfide carrollite (CuCo 2 S 4 ) was applied to activate peroxymonosulfate (PMS) for the abatement of an endocrine disrupting compound (EDC) bisphenol S (BPS) in water. The hydrothermally synthesized CuCo 2 S 4 outperformed conventional cobalt and copper oxides/sulfides in both catalytic activity and stability (i.e. metal leaching) in this oxidation process. The spinel sulfide was most active under neutral pH conditions, which is preferred for water/wastewater treatment. Sulfate radicals (SO 4 − ) which was proved to be the prominent oxidant species in this oxidation process, attacked on BPS producing multiple hydroxylated degradation intermediates. Cu(II)/Cu(I) and Co(III)/Co(II) synergetic surface redox couples are found responsible for the catalytic activation of PMS producing SO 4 − ; furthermore, the thermodynamically favorable reaction between surface Cu(I) and surface Co(III) guarantees the electron transfer between the surface metal sites. As confirmed by turnover frequency calculation, CuCo 2 S 4 has higher catalytic effect per surface cobalt atom than the counterpart oxides for PMS activation, probably due to the lower electronegativity of S 2− than O 2− . CuCo 2 S 4 could be a potentially useful catalyst for water/wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。