ChemistrySelect
·
2026
·Vol. 11
·期 21
·e73559
·
IF 2.3
Xin Long,Shijie Zhou,Dong Liang,Mingdong Zhou,Liwei Sun,Yuehui Li
Room-temperature plasma-assisted catalysis represents an important pathway for CO 2 valorization. Rational design of catalysts tailored to plasma environment holds significant potential for improving catalytic efficiency. Unprecedentedly, we report a coordination-engineering strategy to fabricate the Fe/Cu mix-metal organic framework (Fe/Cu-MOF) catalysts for plasma-driven CO 2 dissociation into CO. Precise modulation during synthesis revealed an optimal Fe:Cu ratio of 0.44:0.56 to generating synergistic active sites favorable for CO production. The in situ-formed FeCu-based catalyst exhibited exceptionally high CO space-time yield of 32.3 mmol·gcat-1·h-1 under room-temperature plasma conditions. The coordination-tailored electronic structure enables the dynamic variations in the oxidation states of Fe/Cu upon plasma activation, thus facilitating sustained CO 2 activation. This work establishes atomic-level control of bimetallic sites as a powerful paradigm for plasma-catalytic systems. Graphical For the first time, Fe-Cu bimetallic metal-organic frameworks (MOFs) synthesized via a one‑pot solvothermal method were used for efficient decomposition of CO 2 into CO with excellent stability under nonthermal plasma (NTP). This integrated approach offers fundamental insights and technical support for the development of robust catalysts under plasma conditions.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Shusheng Wan,Xiaojun Wang,Guiru Zhang,Yongcheng Wang,Jie Chen,Qiaoxia Li,Yixiao Zhang,Liwei Chen,Xiaoming Wang,Guang Meng,Kun Jiang
Utilizing renewable energy to produce green hydrogen from saline water electrolysis is becoming increasingly important yet is largely challenged by the sluggish oxygen evolution reaction kinetics, the competitive anodic chlorine evolution reaction, and the resultant electrode corrosion. Here, we report an electrochemically activated Ni-Fe oxyhydroxide catalyst that delivers an early onset potential of 1.51 V at 100 mA cm–2 within mimic saline water of 0.5 M NaCl + 1 M NaOH. During the electrochemical activation, ex situ X-ray radiation and in situ Raman characterizations reveal the structural reconstruction of amorphous Ni (oxy)hydroxide generation and electronic structure modulation from Fe intercalation. Headspace gas chromatography and iodine titration results confirm the ∼100% Faradaic efficiency toward O2 evolution on activated NiFeOxHy, whereas the long-term stability is assessed by an anion exchange membrane electrolyzer, demonstrating only 350 mV voltage decay during the 100 h continuous electrolysis at 500 mA cm–2.
研究领域:
电化学
·
材料科学
·
可再生能源
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2019
·Vol. 40
·期 5
·631-637
·
IF 4.914
Zhenmin Xu,Ru Zheng,Yao Chen,Jian Zhu,Zhenfeng Bian
Ordered mesoporous Fe/TiO 2 was prepared by an evaporation-induced self-assembly method. The iron ions were in situ embedded in the pore wall of the TiO 2 framework. The catalyst has excellent light-assisted Fenton catalytic performance under UV and visible light irradiation. X-ray diffraction and transmission electron microscopy results showed that the TiO 2 samples have an ordered two-dimensional hexagonal pore structure and an anatase phase structure with high crystallinity . The ordered pore structure of the TiO 2 photocatalyst with a large specific surface area is beneficial to mass transfer and light harvesting. Furthermore, iron ions can be controlled by embedding them into the TiO 2 framework to prevent iron ion loss and inactivation. After five cycles, the reaction rate of the ordered mesoporous Fe/TiO 2 remained unchanged, indicating that the material has stable performance and broad application prospects for the purification of environmental pollutants .
研究领域:
材料科学
·
环境化学
·
催化化学
·
纳米科技
·
光化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2013
·Vol. 24
·期 8
·3095-3100
·
IF 1.486
Gao Feng,Zhang Jing,Song Hongzhang,Qin Zhen,Yang Delin,Hu Xing
The influence of Fe doping on the lattice structure and thermoelectric properties of GdBaCo 2− x
Fe
x
O 5+ δ
( x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) ceramics was studied from room temperature to 525 K. The results show that presence of Fe will increase both electrical resistivity and Seebeck coefficients of the samples. Due to the lattice misfit and carrier concentration reduction caused by Fe, the thermal conductivity of the sample decreases. The activation energy of conductivity is larger than that of thermopower calculated in the semiconductive region, which means that the conduction mechanism may be determined as a small polaron hopping model. The optimum Fe doping amount is x = 0.6, which results in a ZT value 0.02 at 373 K.
研究领域:
材料科学
·
凝聚态物理
·
功能陶瓷
·
热电材料
·
固态离子学
✓ 已验证
DOI
高影响因子
Water Supply
·
2020
·Vol. 21
·期 3
·1016-1024
·
IF 0.9
Dong Zijun,Li Mu,Chen Meifen,Gu Yurong,Jiang Chengchun,Sun Feiyun
The transformation of iodide (I − ) and hypoiodous acid (IO − ) by Fe (II)-activated peroxydisulfate (PDS) in the presence of natural organic matter (NOM) was investigated. In the water of a reservoir in Shenzhen, four kinds of organic matter were detected: iodoform > diiodo-bromomethane > dibromo-iodomethane > dichloromethane. As pH increased from 3 to 10, I − conversion rate decreased from 31.0% to 11.0%. There is basically no iodic acid ( ) generated under alkaline conditions, probably due to these organic matters. When PDS concentration is low, PDS can oxidize part of I − to IO − , and the oxidation of I − into reaction and continued oxidation reaction exist at the same time, so some is generated in the system. As the proportion of Fe (II) increases, the generation rate of gradually increases. When Fe 2+ /PDS is 1:5, 2:5, and 3:5, the conversion rates of are 4.7%, 6.5%, and 8.4%, respectively. There are two main reasons for this: (i) the reaction of IO − produced in the system with humic acid (HA) inhibits the further conversion of IO − to ; (ii) both HA and I- in the system can react with PDS, resulting in a reduction in the oxidation rate of I − . Formation of I-DBPs by Fe (II)/PDS process in real water was evaluated. I-DBPs generation in various reaction conditions was examined. Existence of HA showed apparent inhibition on IO 3 − generation.
研究领域:
环境化学
·
水处理技术
·
高级氧化工艺
·
消毒副产物生成
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Yi Chen,Rong Qiang,Yulong Shao,Jiawen Qiu,Qian Ma,Xiao Yang,Rui Xue,Bowen Chen,Shijiang Feng,Yuancheng Ding
Magnetic metal modified carbon-based composites synthesized through chemical methods have shown great potential in the field of electromagnetic wave (EMW) absorption. Biomass-derived carbon, as an alternative to traditional carbon sources, has better economic and environmental benefits. In this work，we embedded magnetic iron ions in dried agaric through multi-effect adsorption and obtained ripple-like Fe/C composites after high-temperature annealing. The effective absorption bandwidth (EAB) of Fe/C composites can reach 6.3 GHz (11.5–17.8 GHz) at 2.5 mm, achieving broadband electromagnetic response. The excellent performance can be attributed to the ripple-like carbon, which enhances the transmission path of EMW in the absorber. On the other hand, the uniform loading of Fe nanoparticles on biomass-derived carbon promotes the interface polarization and dipole polarization and coordinates the impedance matching of the composites. This study provides a reference for the design and construction of efficient biomass-derived magnetic carbon-based absorbers.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Chunmiao Liu,Yanchun Tong,Chang Liu,Jie Liu,Haibin Sun,Qiangqiang Hu,Shigang Wu,Yujun Zhao,Jiao Li,Xue Guo,Yurun Feng
In this work, novel and efficient SiBCN(Fe) nanofibers were successfully prepared by electrostatic spinning and polymer-derived ceramic (PDCs) methods, and their electromagnetic wave (EMW) absorption properties were investigated after pyrolysis at 1100–1500 °C. Notably, SiBCN(Fe) nanofibers exhibit the best EMW absorption performance after pyrolysis at 1400 °C, with a minimum reflection loss (RL min ) of −72.87 dB at 3.6 GHz and an effective absorption bandwidth (EAB, RL≤ −10 dB) of 4.34 GHz at 1.44 mm. Its excellent EMW absorption performance is attributed to its fiber structure, which facilitates the multi-level reflection and scattering of EMW. Meanwhile, the doping of Fe facilitates the in-situ generation of substances such as Fe 3 Si, which can impart SiBCN(Fe) nanofibers with magnetic loss and perfect impedance matching performance. The simulated radar cross-section (RCS) results show that the optimized SiBCN(Fe) nanofibers can effectively achieve the attenuation of EMW in a practical environment. Compared with many previously reported magnetic hybrid composites, SiBCN(Fe) nanofibers exhibit excellent electromagnetic absorption properties with a simpler preparation process, which have the potential to be used as lightweight, ultra-strong radar-absorbing materials.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Qiansong Li,Hao Xu,Guanyu Zhou,Feng Cheng,Meijing Wang,Jing Zhang,Yunqi Wang,Xue Huang,Qingguo Wang
The shortcomings of homogeneous activation for metal/sulfite such as narrow pH range, recovery and potential secondary contamination seriously limit the application of metal/sulfite systems in practical conditions. To overcome these drawbacks, we tested the degradation of metronidazole using an iron-doped graphite carbonitride (5%Fe-g-C 3 N 4 ) as the catalyst to activate sulfite. The mechanism of the reaction was studied by X-ray photoelectron spectroscopy, radical quenching and chemical probe experiment. The effects of pH, Fe-g-C 3 N 4 , sulfite dosages and common anions were assessed and the degradation pathway of MNZ was also proposed. The results showed that 5%Fe-g-C 3 N 4 was an effective catalyst for sulfite activation in the heterogeneous system and SO 4 − and OH were the main radicals leading to the degradation of metronidazole. After five times of recycle, Fe-g-C 3 N 4 still had a good catalytic activity. Moreover, the Fe-g-C 3 N 4 /sulfite system could degrade metronidazole at a wide pH range of 4–9.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2020
·
IF 7.246
Xiaoyan Li,Kangkang Wang,Mengqian Wang,Wei Zhang,Jiming Yao,Sridhar Komarneni
In order to avoid the intensive burden of sewage treatment in the traditional dyeing process of indigo caused by the heavy usage of sodium dithionite (Na 2 S 2 O 4 ), an indirect electrochemical reduction dyeing method for denim fabrics was carried out. The indirect electrochemical reduction dyeing with different iron-based complexes was explored by cyclic voltammetry. In addition, the stability of the complex solution, the reduction potential of the dye solution, the rate of dye reduction (Re) and ferrous ion conversion (Xe) in the electrochemical process were investigated, which showed that the Fe(Ⅱ)-DGS-Abal B complex containing ferrous sulfate, sodium gluconate and Abal B (a complexing agent with high alkali resistance and electrical conductivity based on triethanolamine) had stronger reducing capacity. Furthermore, orthogonal experiments and gray clustering analysis were utilized to optimize the indirect electrochemical dyeing process for denim fabric. Under the optimized electrochemical reduction dyeing process, the rate of dye reduction could be up to 91.23% and the K/S value of dyed denim fabric could reach 14.75, which is 6.58% higher than that of the traditional dyeing process. Besides, the dyeing depth is nearly invariable within 7 times of cyclic dyeing and the dyeing liquid is more susceptible to biological and chemical degradation . Compared with the traditional reduction dyeing with Na 2 S 2 O 4 at higher temperature, the electrochemical reduction dyeing strategy uses electrical energy to reduce indigo at room temperature, and the reduction medium could be sustainably utilized by the circulation pump after the cyclic electrochemical reduction dyeing is completed, which not only decreases the COD value of dyeing wastewater, but also saves 63.5% of the economic cost. The eco-friendly electrochemical dyeing strategy presented here with obvious economic benefits could significantly contribute to enhance the sustainability of dyeing process for denim production.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2020
·Vol. 55
·期 27
·13363-13371
·
IF 3.553
Cao Yutao,Yuan Yue,Shang Yafen,Zverev Vladimir I.,Gimaev Radel R.,Barua R.,Hadimani R. L.,Mei Lan,Guo Gang,Fu Hao
Micro-sized particles of Fe x Rh 100− x ( x = 50, 48, 45, 40, and 35) binary alloys were synthesized by a solid-phase reduction method and their structural properties, magnetic properties and cytotoxicity have been characterized. From X-ray diffraction results, the Fe 50 Rh 50 alloy is in a single chemically ordered α ′ phase while the face-centered cubic disordered γ phase arises and increases with Rh content when x is smaller than 50. The magnetization behavior of the alloys demonstrates that the α ′ phase consists of ferromagnetic and antiferromagnetic components due to the nonuniformity of elements in the particulate alloys. The maximal magnetic entropy change and the relative refrigeration capacity of the Fe 50 Rh 50 particles reach 9.7 J/kg K and 230 J/kg, respectively, with a 0–3 T magnetic field change. Despite its moderate magnetic entropy among the first-order transition materials, Fe 50 Rh 50 microparticles are promising for biomedical applications due to its large relative cooling power and low cytotoxicity.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2021
·
IF 5.165
Zhi-Kun Liu,Zi-Shuo Yao,Jun Tao
Halogen-substituted Fe(III) compounds, [Fe(HphsalpmX)2]PTFB (HphsalpmX = 5-X-(R,S)-((phenyl(2-pyridyl)methylimino)methyl)phenol, PTFB = phenyltrifluoroborate; X = F for 1, Cl for 2, Br for 3) and [Fe(HphsalpmX)2]PTFB·MeOH (X = I for 4·MeOH), were synthesized. Compounds 1, 4·MeOH, and its desolvated form 4 exhibited an invariant high-spin state in the whole temperature range, while 2 and 3 underwent gradual, nonhysteretic, and incomplete spin crossover (SCO) with transition temperatures (TC) of 153 and 220 K, respectively. Interestingly, the SCO-active compounds 2 and 3 showed light-induced excited spin-state trapping (LIESST) effects at 10 K, and light-induced reversible ON/OFF switching behaviors were realized by alternately using 880 and 1064 nm light, while the thermally inert compound 4·MeOH unexpectedly showed a reverse-LIESST effect. These results may help to design and synthesize new photoresponsive SCO Fe(III) compounds for the development of switchable materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2019
·
IF 5.155
Weimo Li,Meixuan Li,Ce Wang,Yen Wei,Xiaofeng Lu
Rational design of highly efficient electrocatalyst for oxygen evolution reaction (OER) is essential to construct high-performance energy devices. In this study, we have developed an electrospinning, in situ polymerization and carbonization process to fabricate Fe doped CoO/C (Fe-CoO/C) nanofibers as efficient OER electrocatalysts. In the synthesized Fe-CoO/C nanofibers, ultrathin carbon layer can be used as conductive network to promote electron transfer and thus improve the electrocatalytic activity. At the same time, additional active sites, like bridged site, formed by Fe doping, also provides the catalyst excellent electrochemical activity in OER. The as-prepared Fe-CoO/C nanofibers exhibit an excellent OER activity with an overpotential of 362 mV at the current density of 10 mA cm −2 in an alkaline medium, which is comparable with the commercial RuO 2 catalyst. After 2500 cyclic voltammograms (CVs) cycles test, the catalyst still maintains the initial electrocatalytic activity, demonstrating a great durability. This strategy introduces both carbon layer and Fe doping to increase the conductivity and the density of active sites of CoO nanofibers, thus enhancing the electrocatalytic activity and stability. This work offers an efficient route to develop low-cost and highly active transitional metal oxide-based OER electrocatalyst for potential renewable electrochemical energy conversion and storage.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）