MACROMOLECULAR BIOSCIENCE
·
2014
·Vol. 14
·期 10
·1415-1428
·
IF 3.65
Xiaoyu Ai,Jin Sun,Lu Zhong,Chunnuan Wu,Handong Niu,Tao Xu,He Lian,Xiaopeng Han,Guolian Ren,Wenya Ding,Jia Wang,Xiaohui Pu,Zhonggui He
A redox-responsive poly(ethylene glycol) (PEG)-sheddable copolymer of disulfide-linked PEG 5000-lysine-di-tocopherol succinate (P 5k SSLV) is developed which can self-assemble into nanomicelles in aqueous condition and trigger the rapid release of encapsulated drugs within tumor cells. The reduction-insensitive doxorubicin (DOX)-loaded P 5k LV (P 5k LV-DOX) nanomicelles are further prepared. Then head-to-head comparison of P 5k SSLV-DOX, P 5k LV-DOX and DOX-Sol is performed concerning in vitro release, cytotoxicity, cellular uptake and apoptosis. Results show that P 5k SSLV-DOX nanomicelles have a faster DOX release, a higher anti-tumor activity and more DOX concentrating in the nucleus than P 5k LV-DOX nanomicelles. In conclusion, the redox-responsive P 5k SSLV nanomicelles might hold a great potential to improve chemotherapy by tumor-triggering intracellular rapid release. The outcomes of this study also address the significance of such head-to-head comparison studies in translational research of nanomedicine.
研究领域:
药剂学
·
肿瘤学
✓ 已验证
DOI
PubMed
高影响因子
MOLECULAR PHARMACEUTICS
·
2014
·
IF 4.787
Shixian Lv,Wantong Song,Zhaohui Tang,Mingqiang Li,Haiyang Yu,Hua Hong,Xuesi Chen
A tumor-acidity-activated charge-conversional polyionic complex nanoparticle system was developed by simply mixing a pair of oppositely charged block copolymers: anionic methoxy poly(ethylene glycol)-b-poly(l-glutamic acid-co-l-phenylalanine) (mPEG-b-P(Glu-co-Phe)) and cationic methoxy poly(ethy1ene glycol)-b-poly(l-lysine-co-l-phenylalanine) (mPEG-b-P(Lys-co-Phe)). The nanoparticles could stay negatively charged under normal physiological pH value and reverse the surface charge to positive at the tumor extracellular environment. Doxorubicin (DOX) was encapsulated into the nanoparticles fabricated by a self-assembly process, and the DOX-loaded polyionic complex nanoparticles (DOX-NPs) retained the charge-conversional property. In vitro DOX release study demonstrated that DOX release was promoted by the significantly increased acidity in endosomes and lysosomes (pH ≈ 5–6). Cellular uptake studies confirmed that the DOX-NPs could be more effectively internalized by cells at the tumor extracellular pH value. In vitro cytotoxicity assays demonstrated that the polyionic complex nanoparticles had good biocompatibility, and DOX-NPs showed efficient cell proliferation inhibition to HeLa and A549 tumor cells. Maximum tolerated dose (MTD) studies revealed that DOX-NPs had a significantly higher MTD (more than 25 mg of DOX/kg) in mice compared to that for free DOX (5 mg of DOX/kg). Furthermore, DOX-NPs showed superior antitumor activity and reduced side toxicity compared to free DOX in A549 tumor bearing nude mice.
研究领域:
药物递送系统
·
生物材料
·
肿瘤学
✓ 已验证
DOI
PubMed
高影响因子
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
·
2024
·
IF 2.4
Xingbo Wang,Hong Huang,Wenxiu Xu,Yanling Gong,Songbo Shi,Xu Wan,Li Pengbiao
Introduction Triple negative breast cancer (TNBC) is characterized with higher malignancy and mortality and is prone to distant metastasis, among which bone is the most common site. It’s urgent to explore new strategies for treatment of TNBC and its bone metastases.Methods A tumor environment responsive vector, poly-(dimethylaminoethyl methacrylate)-SS-poly(ethylene glycol)-SS-poly-(dimethylaminoethyl methacrylate) (PDMAEMA-SS-PEG-SS-PDMAEMA), was constructed to co-delivery transforming growth factor-β1 (TGF-β1) siRNA and forkhead box M1 (FOXM1) siRNA in MDA-MB-231 cells. The preparation, characterization, in vitro release, stability, and transfection efficiency of nanoparticles were measured. Cell viability, migration and invasion of MDA-MB-231 cells were determined. Cell chemotactic migration and cell heterogeneity adhesion of MDA-MB-231 cells to the human osteoblast-like cell line MG-63 were determined.Results PDMAEMA-SS-PEG-SS-PDMAEMA self assembled with siRNA at N/P of 15:1 into nanoparticles with particle size of 122 nm. In vitro release exhibited redox and pH sensitivity, and the nanoparticles protected siRNA from degradation by RNase and serum protein, remaining stable at 4 °C with similar transfection efficiency with lipo2000. Nanoparticles co-loaded with TGF-β1 siRNA and FOXM1 siRNA inhibited the cell viability, migration and invasion of MDA-MB-231 cells, as well as chemotactic migration and heterogeneous adhesion of MDA-MB-231 cells to MG-63 cells, showing a synergetic effect. After gene silencing on TGF-β1 and FOXM1, the epithelial to mesenchymal transition (EMT) related molecules vimentin mRNA expression decreased while E-cadherin increased.Conclusion PDMAEMA-SS-PEG-SS-PDMAEMA was suitable for TGF-β1 siRNA and FOXM1 siRNA delivery, exhibiting synergetic inhibition effect on TNBC and its bone metastases, which might be related to its synergetic inhibition on EMT.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NANOTECHNOLOGY
·
2022
·Vol. 33
·期 27
·275604
·
IF 3.953
Kai Cheng,Jie Zhou,Yujie Zhao,Yu Chen,Lan Ming,Da Huang,Rui Yang,Zhenyu Lin,Daozhen Chen
Herein, an amphiphilic block copolymer CD44-targeting peptide-conjugated polyethylene glycol-block-hydroxyethyl starch-block-poly (L-lactic acid) (CD44p-conjugated PEG-b-HES-b-PLA) are synthesized, which could self-assemble into the pH-responsive and CD44-targeting polymer micelles against breast cancer cells MDA-MB-231. Emodin (Emo) is a natural anthraquino with pharmacological activities in anti-tumor effects. However, Emo suffers from poor water solubility, low biocompatibility, rapid systemic elimination, and off-target side effects, resulting in unsatisfactory treatment outcomes. Nanotechnology-based drug delivery systems have proven great potential for cancer chemotherapy. The constructed polymeric micelles Emo@CD44p-PM have exhibited an average size of 154.5 ± 0.9 nm characterized by DLS and TEM. Further, the Emo@CD44p-PM have effective Emo-loading capacity, good thermal stability, and pH responsiveness. Intracellular uptake study shows the enhanced cellular internalization of Emo@CD44p-PM due to the increased exposure of CD44p enhances the cellular internalization of Emo@CD44p-PM effectively. Furthermore, the in vitro results showed Emo@CD44p-PM has been observed good biocompatibility and anti-tumor effects. Therefore, the polymeric micelles Emo@CD44p-PM provide a promising delivery strategy of targeted therapy for breast cancer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
EUROPEAN POLYMER JOURNAL
·
2023
·
IF 6
Junwei Xu,Yi Cui,Meili Liu,Zitong An,Kun Li,Xuenan Gu,Ping Li,Yubo Fan
The incidence of cancer and other diseases continues to increase, posing a serious threat to human health. Drug delivery systems using bionic red blood cell (RBC)-like microparticles (MPs) as drug carriers have been extensively studied, as they are considered ideal carriers due to the unique shape. However, most methods of preparing multifunctional RBC-like MPs are complicated, and the cell affinity and therapeutic effect of MPs prepared using simple electrospray are unsatisfactory. In this context, hydrophilicity-enhanced and magnetic-luminescent bifunctional RBCs-like Janus MPs [Fe 3 O 4 @poly(lactic-co-glycolic acid) (PLGA)-poly(ethylene glycol) (PEG)-PLGA/PLGA]//[NaYF 4 :Eu 3+ @PLGA-PEG-PLGA/PLGA] were successfully prepared by one-step double-needle electrospray method. The physical and chemical properties, such as morphology, particle size, structure, and thermal stability of the MPs, were studied. The addition of block polymer PLGA-PEG-PLGA was found to enhance the hydrophilicity of the MPs, promote cell spreading and adhesion proteins (focal adhesion kinase and Paxillin) mRNA expressions of human umbilical vein endothelial cells, significantly improving the cell affinity. The results also demonstrated that RBC-like MPs exhibited excellent magnetic and enhanced luminescent properties, making them a promising candidate for various biomedical applications, including drug delivery systems, magnetic targeting, bio-imaging, and fluorescent tracing.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF PHARMACEUTICS
·
2020
·
IF 4.845
Jian Liu,Qilong Wang,Emmanuel Omari-Siaw,Michael Adu-Frimpong,Jing Liu,Ximing Xu,Jiangnan Yu
In this study, we sought to overcome the poor solubility and bioavailability of bismethoxycurcumin (BDMC) by fabricating a BDMC-loaded self micro-emulsifying system (BDMC-SMEDDS). Solubility and compatibility tests, pseudo-ternary phase diagrams (PTPDs) as well as d-optimal concept was applied to design the formulation. The assessment of the prepared BDMC-SMEDDS in-vitro mainly included droplet size (DS) and entrapment efficiency (EE) determination, morphology, drug release and stability testing. Besides, the in vivo behavior was also evaluated after oral administration of BDMC-SMEDDS to rats. The optimal formulation was found to compose of Kolliphor EL (K-EL, emulsifier , 645.3 mg), PEG 400 (co-emulsifier, 147.2 mg), ethyl oleate (EO, oil, 207.5 mg) and BDMC (50 mg). The BDMC-SMEDDS with satisfactory stability had a mean size of 21.25 ± 3.23 nm and EE of 98.31 ± 0.32%. Roughly 70% of BDMC was released from BDMC-SMEDDS within 84 h compared with <20% from the free BDMC. More importantly, the in-vivo behavior of BDMC-SMEDDS showed that the AUC (0-12h) and plasma concentration of BDMC increased substantially as compared to the free BDMC. Altogether, BDMC-SMEDDS has the potential to enhance the solubility and bioavailability of BDMC and could be applied in the clinics.
研究领域:
药剂学
·
药物递送系统
·
药代动力学
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
·
2012
·Vol. 50
·期 10
·2053-2067
·
IF 3.919
Yan-Ling Luo,Wei Yu,Feng Xu,Li-Li Zhang
A novel double brush-shaped copolymer with amphiphilic polyacrylate- b -poly(ethylene glycol)- b -poly acrylate copolymer (PA- b -PEG- b -PA) as a backbone and thermosensitive poly( N -isopropylacrylamide) (PNIPAM) long side chains at both ends of the PEG was synthesized via an atom transfer radical polymerization (ATRP) route, and the structure was confirmed by FTIR, 1 H NMR, and SEC. The thermosensitive self-assembly behavior was examined via UV-vis, TEM, DLS, and surface tension measurements, etc. The self-assembled micelles, with low critical solution temperatures (LCST) of 34–38 ° C, form irregular fusiform and/or spherical morphologies with single, double, and petaling cores in aqueous solution at room temperature, while above the LCST the micelles took on more regular and smooth spherical shapes with diameter ranges from 45 to 100 nm. The micelle exhibits high stabilities even in simulated physiological media, with low critical micellization concentration (CMC) up to 5.50, 4.89, and 5.05 mg L −1 in aqueous solution, pH 1.4 and 7.4 PBS solutions, respectively. The TEM and DLS determination reveled that the copolymer micelle had broad size distribution below its LCST while it produces narrow and homogeneous size above the LCST. The cytotoxicity was investigated by MTT assays to elucidate the application potential of the as-prepared block polymer brushes as drug controlled release vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012
研究领域:
高分子化学
·
材料科学
·
药物递送
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Ruilong Xu,Wei Liu,Yiting Jiang,Shuai Zhao,Lin Li
The latent heat of phase change in iPCMs reaches up to 110.14 J/g. • iPCMs are flexible materials with a maximum elongation at break of up to 527.25%. • iPCMs exhibit excellent dimensional stability and recyclability. • The transverse thermal shrinkage rate of FEVA-iPCMs decreased by 56.05%. • The longitudinal thermal shrinkage rate of FEVA-iPCMs has been reduced by 57.66%. Developing organic phase change materials that simultaneously exhibit high latent heat, shape stability, and recyclability remains a significant challenge, particularly in achieving an effective balance between suppressing phase change component leakage and maintaining high latent heat. In this study, we constructed a crosslinked framework via esterification between polyethylene glycol (PEG) and pyromellitic dianhydride (PMDA) and introduced zinc acetate to form a dynamic ionic crosslinking network; meanwhile, ethylene-vinyl acetate (EVA) provided flexibility and encapsulation support, enabling the successful fabrication of a recyclable, high-latent-heat, flexible solid-solid phase change material (iPCMs). We systematically investigated the effects of the equivalent ratio of PEG to PMDA on the structural characteristics, thermal behavior, rheological properties, mechanical performance, and recyclability of the iPCMs. The results demonstrate that the as-prepared iPCMs achieve a phase change latent heat of up to 110.14 J/g and a maximum elongation at break of 527.25%, while exhibiting excellent recyclability, stable shape retention, and well-preserved performance after 100 thermal cycles. Furthermore, we incorporated the iPCMs into an EVA foaming system, where the iPCMs not only restricted EVA molecular chain mobility through the ionic crosslinking network but also slowed gas diffusion within the cells and thermal relaxation of the EVA matrix via a phase change-induced temperature-regulating effect, thereby significantly improving the dimensional stability of EVA foams at 70 °C. Specifically, the transverse and longitudinal shrinkage rates of FEVA-iPCMs-4.5 are 1.89% and 1.77%, respectively, representing reductions of 56.05% and 57.66% compared with those of FEVA. This study provides a viable new pathway for developing high-performance, recyclable composite phase change materials and for realizing their functional applications in polymer foaming systems.
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2025
·Vol. 27
·期 10
·1-16
·
IF 2.6
Zhu Junqiao,Tang Wei,Sun Zhiting,Zhu Xinhai,Quan Qiang,Yin Jiaxin,Huang Qiugui,Jia Guoxia,Zhao Yang,Tang Yuqin,Zhang Yan,Xie Linhao,Zhao Jianfu
Multiple cycles of transarterial embolization chemotherapy for hepatocellular carcinoma (HCC) can easily cause the overexpression of P-glycoprotein (P-gp), leading to multidrug resistance (MDR) of HCC. Herein, we linked PLA (polylactic acid) with doxorubicin (DOX) through acid-sensitive hydrazone bonds to prepare PLA-ADH/DOX. Then, PLA-ADH/DOX and disulfiram (DSF) were physically encapsulated into PLGA-PEG (polylactic-co-glycolic acid-polyethylene glycol) as the backbone to fabricate a drug delivery system (DOX/DSF NPs) by nanoprecipitation and emulsion solvent evaporation method. The data of physicochemical characterization showed that DOX/DSF NPs enabled excellent stability at room temperature and pH sensitivity in an acidic environment. More importantly, DOX/DSF NPs could avoid P-gp-mediated efflux through endocytosis pathways and inhibit the function of P-gp by DSF, which increases cellular uptake of DOX in HepG2/DOX cells (hepatocellular DOX-resistant cancer cell line) and promotes DOX to enter the nucleus of HepG2/DOX cells for exerting the therapeutic effect in vitro. In addition, DOX/DSF NPs could increase intracellular reactive oxygen species (ROS) levels and reduce intracellular adenosine triphosphate (ATP) levels, thereby further inhibiting the function of P-gp, increasing intracellular concentration of drugs, and ultimately overcoming MDR in HCC. Hence, the combination of DOX and DSF delivered by DOX/DSF NPs with pH-sensitive and sequentially controlled drug release may provide a new way for MDR of HCC.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICAL CHEMISTRY B
·
2011
·
IF 3.603
Jiucun Chen,Mingzhu Liu,Honghong Gong,Yinjuan Huang,Chen Chen
A well-defined thermoresponsive poly(ethylene glycol)-block-poly(N-isopropylacrylamide)-block-poly(ε-caprolactone) (PEG43-b-PNIPAM82-b-PCL87) triblock copolymer was synthesized by combination of atom transfer radical polymerization (ATRP), ring-opening polymerization (ROP), and click chemistry. The synthesis included the four steps, and all the structures of the polymers were determined. The thermoresponsive triblock copolymer can disperse in water at room temperature to form core–shell–corona micelles with the hydrophobic PCL block as core, the thermoresponsive PNIPAM block as shell, and the hydrophilic PEG block as corona. At temperatures above the lower critical solution temperature (LCST) of the PNIPAM block, the PNIPAM chains gradually collapse on the PCL core to shrink the size and change the structure of the resultant core–shell–corona micelles with temperature increasing.
研究领域:
材料科学
·
高分子化学
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2023
·
IF 3.4
Chihao Gao,Lixia Pan,Jie Song,Min Wei,Haozhi Sun,Feng Su,Xin Shen,Suming Li
Valsartan is almost insoluble, resulting in very low bioavailability. Preparing prolonged sustained-release systems to achieve valsartan drug delivery is essential. Herein, two types of poly(ethylene glycol)-b-poly(lactide-co-glycolide) (PEG-PLGA) nanoparticles loading valsartan and carboxymethyl chitosan/aldehyde sodium hyaluronate hydrogels were prepared. The nanoparticles and hydrogel composites(NPs@Gel) were obtained by physical mixing. The NPs@Gel composites have swelling ratios within the scope from 157.87% to 206.51% and mass loss within the scope from 12.85% to 17.32%, influenced by incorporating PEG-PLGA nanoparticles. Moreover, the NPs@Gel composites had properties of self-healing and injection proven by rheological measurements. Importantly, adding nanoparticles could significantly reduce the swelling ratios of the hydrogels by shrinking the void fraction and enhancing the mechanical properties. Meanwhile, NPs@Gel composites also present excellent biocompatibility as evidenced by hemolysis test and MTT assay. Therefore, a potential prolonged sustained-release system of NPs@Gel for the delivery of valsartan was achieved.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2022
·Vol. 14
·期 38
·14122-14128
·
IF 8.307
Chenchao Huang,Zishou Hu,Yuan-Qiu-Qiang Yi,Xiaolian Chen,Xinzhou Wu,Wenming Su,Zheng Cui
Manufacturing cost is a major concern for electrochromic device (ECD) applications in smart windows for energy saving and low-carbon economy. Fully printing instead of a vacuum-based chemical vapor deposition (CVD) process is favored for large-scale fabrication of ECDs. To adapt to the screen printing process, a UV curable solid-state electrolyte based on lithium bis(trifluoromethane-sulfonyl) imide (LiTFSI) was specially formulated. It contains poly(ethylene glycol) diacrylate (PEG-DA), LiTFSI, water, and ethyl acetate. The optimized ECDs have achieved a 0.6 s bleaching time at 0.6 V and a 1.4 s coloring time at −0.5 V. The ECDs also exhibited excellent stability, which could endure 100 000 cycles of color switching while still maintaining 35% of transmittance change at a 550 nm wavelength. A demo ECD has been fabricated with a screen printed electrolyte, exhibiting stable switching between the clear state and patterned color state.
研究领域:
材料科学
·
电化学
·
能源效率
·
制造技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）