文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第649至660个,产品总数1,134个

设置提升方向
(Bi
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2021 · IF 8.128

Bifunctional effect of Bi(OH)3 on the PdBi surface as interfacial Brønsted base enables ethanol electro-oxidization

Jialu Huang,Chengwei Deng,Yue Liu,Tingting Han,Feng Ji,Yuehua Zhang,Hongbin Lu,Ping Hua,Bowei Zhang,Tao Qian,Xiaolei Yuan,Yaoyue Yang,Yong Yao

Palladium (Pd) is supposed to be one of the most promising catalytic metals towards ethanol (C 2 H 5 OH) oxidation reaction (EOR). However, Pd electrocatalysts easily suffer from the poisoning of the intermediates (especially CO), resulting in the quick decay of EOR catalysis. Herein, inspired by the Brønsted-Lowry acid-base theory, a “attraction–repulsion” concept is proposed to guide the surface structure engineering toward EOR catalysts. Specifically, we induce Bi(OH) 3 species as Brønsted base onto PdBi nanoplates to effectively repel the adsorption of CO intermediates. The PdBi-Bi(OH) 3 nanoplates show an impressive mass activity of 4.46 A mg Pd -1 during the EOR catalysis and keep excellent stability. Both the stability and enhanced performance are attributed by the interfacial Brønsted base Bi(OH) 3 which can selectively attract and repel reactants and intermediates, as evidenced from in situ measurements and theoretical views.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
RESEARCH ON CHEMICAL INTERMEDIATES · 2026 · IF 3.3

S-scheme Bi(C2O4)OH/Bi2WO6 heterojunction enriched with oxygen vacancies for enhanced photocatalytic degradation of rhodamine B

Ma Yong-hu,Ma Fu,Zhao Tiao-bin,Gao Zi-yi,La Ying-hong,Zhao Hong-jian

Limited interfacial charge separation efficiency and insufficient redox capacity severely hinder the practical application of conventional Bi 2 WO 6 -based photocatalysts. To address these issues, a novel Bi(C 2 O 4 )OH/Bi 2 WO 6 heterojunction was constructed via a facile room-temperature one-pot liquid-phase deposition method. Multiple characterizations confirm the intimate interfacial contact between Bi(C 2 O 4 )OH nanorods and uniformly anchored Bi 2 WO 6 nanoparticles, accompanied by the introduction of abundant oxygen vacancies. On the basis of radical trapping experiments, EPR measurements, and electrochemical tests, an S-scheme charge-transfer model is proposed. This model retains the strong redox potentials of both semiconductors, while oxygen vacancies are speculated to act as efficient interfacial charge-trapping and transfer sites to synergistically promote the migration and separation of photogenerated carriers. The optimized 7%Bi(C 2 O 4 )OH/Bi 2 WO 6 composite achieves an RhB removal efficiency of 97.6% within 60 min for 50 mL of RhB solution (30 mg·L -1 ) under 5-W LED lamp irradiation. Radical trapping and EPR tests confirm that ·O 2 - , h⁺, and ·OH are the dominant active species. This work presents a facile and efficient room-temperature fabrication strategy for Bi-based heterojunctions and systematically elucidates the synergistic promotion mechanism between oxygen vacancies and the proposed S-scheme charge-transfer pathway, offering new insights for designing high-performance photocatalysts for organic wastewater remediation.

CAS / MDL: 10213-10-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano Research · 2023 · IF 9.9

Hierarchical Bi/S-modified Cu/brass mesh used as structured highly performance catalyst for CO2 electroreduction to formate

Dou Tong,Song Dian,Wang Yiping,Zhao Xuhui,Zhang Fazhi,Lei Xiaodong

Electrocatalytic CO 2 reduction reaction (ECO 2 RR) converts CO 2 to high-value chemical products and promotes the carbon cycle. Sulfur (S)-modified copper (Cu) and bismuth (Bi)-based catalysts have been recognized as promising catalysts for ECO 2 RR. Both of them are highly active for selective formate generation, however, their poor stability and severe competing hydrogen evolution reaction (HER) remain challenging. Herein, S-doped Cu coated with Bi (Bi/Cu-S) is developed to improve ECO 2 RR selectivity to formate. Bi/Cu-S/brass mesh (BM) electrode material for ECO 2 RR was prepared by electrodepositing Bi on the surface of Cu-S/BM nanowires obtained from CuS/BM after the electroreduction. The Faradaic efficiency (FE) of the formate reaches the maximum of 94.3% at −0.9 V vs. reversible hydrogen electrode (RHE) with a partial current density as high as −50.7 mAcm −2 and a yield of 30.7 mmolh −1 cm −2 under 0.5 M KHCO 3 electrolyte. Meanwhile, the FE of formate is higher than 90% in the voltage range of −0.8 to −1.0 V vs. RHE. It also shows good stability at −0.9 V vs. RHE with the FE of formate remaining above 93% after a 10 h reaction. Density functional theory (DFT) calculations demonstrate that the Bi/Cu-S structure promotes the adsorption of CO 2 and effectively inhibits HER by enhancing the adsorption of *H to a great extent, improving the selective conversion of CO 2 to formate. This work deepens the understanding of the mechanism of Cu-Bi-based catalysts and S-modified Cu-based catalysts in selective ECO 2 RR to formate, and also provides a new strategy for catalyst design.

CAS / MDL: 10035-06-0 298-14-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2023 · IF 7.2

Microwave synthesis of self-supported Bi/NF anodes with ultra-high capacity for supercapacitors and hydrogen evolution reaction

Ning Lv,Huitao Li,Jinjuan Dong,Xianrui Liu,Tianbao Li,Jujie Luo

Bi nanoflakes on Ni foam (NF) for supercapacitors (SCs) are prepared by simple one-step microwave irradiation without further calcination. XRD and XPS results reveal the successful synthesis of Bi crystal. SEM and EDS results uncover the growth of Bi and the constituent elements of the complexes. The Bi anode on NF (Bi/NF) not only enables an ultra-large specific capacity of 4651 F g −1 (1 A g −1 ) and a capacity maintenance rate of 75% (after 1000 cycles), but it also exhibits outstanding catalytic hydrogen precipitation reaction, reaching an overpotential of −136 mV versus the reversible hydrogen electrode at −10 mA cm −2 and Tafel slope of 114.4 mV dec −1 . The Bi anode is gathered into the asymmetric SC, which demonstrates an ultra-high energy density of 125 Wh kg −1 (power density of 640 W kg −1 ) in an alkaline electrolyte.

CAS / MDL: 10035-06-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2023 ·Vol. 52 ·期 38 ·13732-13736 · IF 4

Na11Ta8P7O43: (Ta8O33) bi-capped triangular prisms connected by PO4 groups resulting in a phase-matched second harmonic response

Ziyan Lv,Rukang Li

Much effort has been devoted to synthesizing nonlinear optical crystals with efficient second harmonic responses. Herein, a tantalum phosphate crystal Na11Ta8P7O43 with a moderate second harmonic response was obtained using self-fluxes of NaH2PO4 and Na2HPO4. Na11Ta8P7O43 belongs to the Cc space group of monoclinic systems with cell parameters of a = 8.5710(2) Å, b = 15.1144(4) Å, c = 28.7712(7) Å, β = 92.304(2)°, Z = 4. Its structural features were unique (Ta8O33) bi-capped triangular prisms uniformly oriented with a PO4 connection in the ab plane, which were further joined through additional PO4 groups in the c direction, resulting in moderate nonlinear effects. In addition, this crystal has the characteristics of phase-matchable second harmonic generation, a shorter cutoff edge than the known materials LiTaO3 and KTiOPO4, and high transmittance from the visible to the near infrared band, and may serve as a potential nonlinear optical crystal.

CAS / MDL: 7558-80-7 1314-61-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2021 · IF 8.128

3D Taraxacum-like porous Pd nanocages with Bi doping: High-performance non-Pt electrocatalysts for ethanol oxidation reaction

Xingchi Li,Huaming You,Cheng Wang,Dongmei Liu,Rui Yu,Siyu Guo,Yuan Wang,Yukou Du

Modifying the electronic structure and optimizing the geometric structure can expeditiously tune the electrocatalytic properties of catalysts, resulting in considerably enhanced electrocatalytic performance towards electrocatalytic oxidation of liquid fuels . We herein report a simple synthetic strategy to prepare Bi-doped 3D taraxacum-like Pd nanocages (NCs) composed of porous nanosheets , which possess high surface areas and strong synergistic effects. Notably, a trace of Bi diffuses into the lattice of Pd and increases the electronic effects of the surface of Pd, endowing PdBi-0.5 NCs/C with superior electrocatalytic performance towards ethanol oxidation reaction (EOR). The mass activity and specific activity of PdBi-0.5 NCs/C were 3494.8 mA mg Pd −1 and 10.37 mA cm −2 , being 4.08- and 4.82- fold enhancements as compared with commercial Pd/C, respectively. Moreover, the highly open porous 3D nanocages structure with rich active sites and defects can also facilitate the mass/electron transfer to favor the EOR kinetics.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2020 · IF 4.65

Photocatalytic degradation of MB dye by the magnetically separable 3D flower-like Fe3O4/SiO2/MnO2/BiOBr-Bi photocatalyst

Mingliang Ma,Yuying Yang,Yan Chen,Yong Ma,Ping Lyu,Aiqi Cui,Weibo Huang,Zhe Zhang,Yanzheng Li,Feiyan Si

The flower-like Fe 3 O 4 /SiO 2 /MnO 2 /BiOBr-Bi magnetic composite photocatalyst was prepared in this work. The combination of BiOBr and Bi metal with flower-like MnO 2 constituted a heterojunction structure, which increased the specific surface area of the photocatalyst and promoted the separation of photo-generated carriers, resulting in the enhanced catalytic performance. The morphologies and the compositions of the photocatalyst were characterized in detail. Under simulated light, the degradation of organic dye methylene blue (MB) was used to research the photocatalytic activity. In the case of 15 mg photocatalyst, it was found that the photocatalytic degradation efficiency to the MB solution was 95.23% within 150 min. Moreover, the degradation rate of MB could still reach 81.11% after four cycles. The design of flower-like composites with magnetic core-shell structure provided a new method for fabricating photocatalysts having excellent catalytic performance and cyclic stability.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Sustainable Energy & Fuels · 2020 ·Vol. 4 ·期 7 ·3334-3339 · IF 5.503

In situ electrochemical reduction-assisted exfoliation: conversion of BiOCl nanoplates into Bi nanosheets enables efficient electrocatalytic nitrogen fixation

You Xu,Tianlun Ren,Shanshan Yu,Hongjie Yu,Shuli Yin,Ziqiang Wang,Xiaonian Li,Liang Wang,Hongjing Wang

The electrocatalytic nitrogen reduction reaction (NRR) for ammonia (NH3) synthesis is highly desirable yet still challenging. Catalysts, as the core component of electrocatalytic NRR systems, are a specific focus of research. In this work, we demonstrate that NRR active semimetal bismuth (Bi) ultrathin nanosheets (Bi NSs) could be prepared by means of the in situ electrochemical reduction-assisted exfoliation of BiOCl nanoplates (BiOCl NPs). Such a conversion, from semiconductive BiOCl NPs to semimetal Bi NSs, could create enlarged surface areas and bring about abundant under-coordinated Bi sites and accelerated electron transport capability. With these advantageous properties, the as-converted Bi NSs exhibit efficient NRR electrocatalytic activity in 0.1 M Na2SO4, achieving a high faradaic efficiency (14.14%) and NH3 yield (11.11 μg h−1 mgcat.−1) at −0.5 V (vs. reversible hydrogen electrode), as well as high NH3 selectivity.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2020 · IF 4.65

Length and composition tunable Sb–Bi–S nanowires for optoelectronic devices prepared via an isostructure-favored solvothermal synthesis

Junli Wang,Lei Jin,Tingting Wang,Lijun Zhao,Fan Guan,Shaopeng Li,Dan Wang,Junhao Zhang

We report the ethylene glycol-mediated solvothermal synthesis of the continuous solid solution (Sb 1-x Bi x ) 2 S 3 (0 < x < 1) with 1D nanostructures (nanowires and nanorods). The ternary products show a broad variation in Bi:Sb composition ratios (53:47–7:93), length-to-diameter aspect ratios (2.7–66.2), and optical bandgap energies (1.36–1.55 eV) as well as an enhanced photocurrent (e.g., (Sb 1-x Bi x ) 2 S 3 with x = 0.22 is three times higher than pure Sb 2 S 3 ). The gradual shift of peak positions in the XRD patterns and the uniform distributions of Bi, Sb and S elements in EDS mapping prove the formation of single-phase (Sb 1-x Bi x ) 2 S 3 solid solution. Its formation is due to an isostructure-favored alloying mechanism, since Sb 2 S 3 and Bi 2 S 3 possess the same orthorhombic structure (space group: Pnma) and the similar lattice constants . The substitution of Bi for Sb isovalent cations can shorten the lengths of ternary alloyed Sb–Bi–S nanowires and transfer them to low aspect-ratio nanorods at high Bi/Sb precursor ratios. The dependence of the lengths on Bi/Sb ratios is reasonably interpreted considering the differences in the number of nuclei at different amounts of Bi ions and the covalency of Bi–S and Sb–S bonds during the alloying process.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Acta Biomaterialia · 2020 · IF 7.242

X-ray and NIR light dual-triggered mesoporous upconversion nanophosphor/Bi heterojunction radiosensitizer for highly efficient tumor ablation

Jie Liu,Jing Zhang,Fei Huang,Yong Deng,Bing Li,Ruizhuo Ouyang,Yuqing Miao,Yun Sun,Yuhao Li

ABSTRACT Developing a multi-functional radiosensitizer with high efficiency and low toxicity remains challenging. Herein, we report a mesoporous heterostructure radiosensitizer ( [email protected] ) containing Lu-based upconversion nanophosphor (UCNP) and Bi-based nanomaterial loaded with iron phthalocyanine for X-ray and NIR light dual-triggered tri-modal tumor therapy. NaLuF 4 :Yb,Tm, a Lu-based UCNP, offers radiosensitization and upconversion luminescence for optical bio-imaging. However, Bi has a higher X-ray mass attenuation coefficient than Lu . Thus, after stepwise fabrication, Na 0.2 Bi 0.8 O 0.35 F 1.91 :Yb (NBOF) was assembled with the UCNP to form a mesoporous heterostructure composite. This enhanced the radiosensitization effect and drug load to realize multi-modal tumor therapy. After coating it with folate-conjugated amphiphilic PEG (PFA), [email protected] realized tumor photothermal/photodynamic/radio-therapy. The structure of [email protected] was well characterized. Different properties triggered by X-ray and NIR light were evaluated. Finally, a highly efficient tumor ablation effect was demonstrated in vitro and in vivo . Consequently, this kind of nanocomposite provides a unique strategy for designing a theranostic platform for oncotherapy. Statement of Significance The synergy of enhanced radiotherapy and photothermal/photodynamic therapy is found to improve tumor therapeutic efficacy. On that basis, a heterostructure nanohybrid containing Lu-based UCNP and Bi-based mesoporous material is synthesized. The heterostructure nanohybrid can be loaded with FePc and decorated with folate-modified amphiphilic PEG to form a multi-functional theranostic nano-platform. The platform exhibits upconversion luminescence capacity, X-ray attenuation property, photothermal effect, and X-ray and NIR dual-light triggered ROS generation capability. These features can not only enable upconversion luminescence/CT bioimaging of living beings but also be applied to the photothermal/photodynamic/radio- synergistic tumor ablation. To sum up, the nanomaterial offers a novel method for the construction of a new theranostic platform.

CAS / MDL: 35725-34-9 1331-74-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2020 ·Vol. 27 ·期 6 ·3037-3054 · IF 4.21

One-pot synthesis of HMF from carbohydrates over acid-base bi-functional carbonaceous catalyst supported on halloysite nanotubes

Zhang Yunlei,Li Bing,Guan Wen,Wei Yanan,Yan Changhao,Meng Minjia,Pan Jianming,Yan Yongsheng

Nitrogen-doped carbon materials have attracted enormous interest in catalysis owing to their outstanding catalytic performance. In this work, nitrogen-doped carbonaceous catalysts (NCC) supported on inexpensive and naturally abundant halloysite nanotubes were successfully synthesized via precipitation polymerization, calcination, and sulfonation processes. The physical and chemical properties of the obtained catalysts were systematically characterized by different methods. The results indicated that NCC catalysts had mesoporous structures, excellent thermostability and acid-base bi-functional active sites. One-pot synthesis of 5-hydroxymethylfurfural (HMF) from glucose was performed to investigate the synthesized NCC catalysts. Benefiting from the synergistic effects of the acid-base bi-functional active sites, the highest HMF yield (62.8%) was achieved in an isopropanol-mediated DMSO system under optimal conditions. Moderate to excellent yields of HMF were also obtained from one-pot conversions of other carbohydrates, including inulin, sucrose, cellobiose, maltose and starch, with our developed catalytic system. The one-pot production of HMF from cellulose was also smoothly processed by the NCC bi-functional catalyst in an IL-based system. This work has developed a versatile strategy for designing nitrogen-doped carbonaceous catalysts that can be employed for the direct transformation of renewable carbohydrates to platform chemicals.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Biomaterials Science · 2021 ·Vol. 9 ·期 18 ·6169-6182 · IF 6.843

Bi-layer silk fibroin skeleton and bladder acellular matrix hydrogel encapsulating adipose-derived stem cells for bladder reconstruction

Shuwei Xiao,Pengchao Wang,Jian Zhao,Zhengyun Ling,Ziyan An,Zhouyang Fu,Weijun Fu,Xu Zhang

A scaffold, constructed from a bi-layer silk fibroin skeleton (BSFS) and a bladder acellular matrix hydrogel (BAMH) encapsulated with adipose-derived stem cells (ASCs), was developed for bladder augmentation in a rat model. The BSFS, prepared from silk fibroin (SF), had good mechanical properties that allowed it to maintain the scaffold shape and be used for stitching. The prepared BAM was digested by pepsin and the pH was adjusted to harvest the BAMH that provided an extracellular environment for the ASCs. The constructed BSFS–BAMH–ASCs and BSFS–BAMH scaffolds were wrapped in the omentum to promote neovascularization and then used for bladder augmentation; at the same time, a cystotomy was used as the condition for the control group. Histological staining and immunohistochemical analysis confirmed that the omentum incubation could promote scaffold vascularization. Hematoxylin and eosin and Masson's trichrome staining indicated that the BSFS–BAMH–ASCs scaffold regenerated the bladder wall structure. In addition, immunofluorescence analyses confirmed that the ASCs could promote the regeneration of smooth muscle, neurons and blood vessels and the restoration of physiological function. These results demonstrated that the BSFS–BAMH–ASCs may be a promising scaffold for promoting bladder wall regeneration and the restoration of physiological function of the bladder in a rat bladder augmentation model.

CAS / MDL: 62883-00-5 60166-93-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。