Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Tianhang Tang,Yaji Huang,Huikang Song,Hao Liu,Hao Shi,Jun Zhang,Yizhuo Qiu,Lang Kai
Safe and efficient disposal of hazardous waste fly ash (HFA) has become a worldwide problem.Hazardous waste and furnace slag contain various heavy metals such as Mn, Cu, Zn, and Cr, posing significant threats to both the environment and human health.co-vitrification of fly ash and bottom slag has the advantages of low consumption and green, and has the potential for large-scale disposal of hazardous waste. On this basis, the co-vitrification of hazardous waste fly ash with bottom slag (HBA) was realised using waste glass (WG) as a flux. A new method for HFA/HBA co-vitrification was proposed. The effects of HFA/HBA ratios on glass conversion rate, heavy metal solidification, and melting mechanism were investigated. The results showed that at 1300°C, with the increase of HBA doping, Ca/Al was basically unchanged, SiO2 increased, and the glass conversion rate increased up to 98.71%. In addition, the effects of Fe, S, Cl and other elements content and valence changes on the glass melting and heavy metal solidification were investigated, and it was proved that Fe, S, Cl and other elements have different effects on the stabilisation of different heavy metals.The presence of iron in particular leads to the formation of spinel phases, which play a significant role in heavy metal immobilisation.By adjusting the HFA/HBA ratio, the overall solidification rate of raw ash can reach 94.6%,while ensuring a glass transition rate exceeding 85%, the HFA/HBA-WG system effectively cures a significant quantity of heavy metals. The HFA/HBA-WG system effectively cured a large amount of heavy metals, which provided a reference for the migration law of HFA/HBA-WG glass melting and heavy metal solidification.
✓ 已验证
产品关联
DOI
高影响因子
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
·
2025
·
IF 5.9
Hua-Long Du,Qi Wang
This study presents a novel surface plasmon resonance (SPR) sensor utilizing an M-shaped optical fiber structure, which enables the simultaneous detection of temperature, pH, and refractive index (RI). The sensor is made of multi-mode fiber, the whole M-shaped fiber without any splicing, which ensures the stability of the sensor's performance and structure. The entire fiber surface is coated with a 50 nm thickness Au film to stimulate the SPR phenomenon. The M-shaped fiber sensor consists of three U-shaped sensing regions coated with indium tin oxide (ITO), polydimethylsiloxane (PDMS)/Au nanoparticles (Au-NPs), and polyacrylic acid (PAA)/chitosan (CS) composite films for RI, temperature, and PH detection in different detection regions. The sensor excels in performance with RI sensitivity up to 4459 nm/RIU within the scope of 1.3332-1.3452, temperature sensitivity of -1.65 nm/°C in the interval of 25-65°C, and pH sensitivity of -21.12 nm/pH lying within the interval of 5.45-9.55. Additionally, the sensor exhibits good stability and repeatability, with maximum measurement errors of 0.000067 RIU for RI, 0.0094 for pH, and 0.3°C for temperature. The sensor is simple to fabricate, low-cost, compact, and suitable for multi-parameter measurements in complex environments. This SPR sensor demonstrates broad applicability across multiple domains, including biosensing, environmental monitoring, and chemical analysis.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Yikang Zhang,Maosong Lin,Yuran Wang,Bowei Yin,Jianglan Qu
Plant essential oil-based pesticides are increasingly valued in green agriculture for their efficacy, environmental compatibility, low toxicity, and minimal impact on non-target organisms. However, their practical use remains limited by short efficacy periods, poor photostability, and low solubility. To overcome these limitations, this study developed a pH-responsive hydrogel composed of carvacrol and the natural polysaccharides chitosan (CS) and guar gum (GG), which improved photostability by 126 %. The CS-GG hydrogel exhibited accelerated carvacrol release under acidic conditions, showing a relative increase of 20 % and following a Weibull diffusion model, thereby enabling targeted drug delivery at infection sites. Encapsulation markedly enhanced antifungal performance against anthracnose, achieving superior mycelial inhibition on tomato surfaces in both preventive and curative treatments compared with unencapsulated carvacrol. Moreover, hydrogel encapsulation reduced acute toxicity by minimizing direct exposure, as reflected by zebrafish LC 50 values that increased by approximately 71 % at 48 h and 46 % at 96 h, thereby significantly improving ecological safety. These findings demonstrate that the pH-responsive CS-GG hydrogel offers a promising platform for controlled delivery of botanical pesticides. This approach not only provides an effective, environmentally friendly solution for anthracnose control but also establishes a versatile framework for advancing the application of other plant-derived pesticides in sustainable crop protection.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·9451
·
IF 15.7
Bai Ju,Xiao Luqi,Zhang Xiangping,Liu Hongyan,Wang Can,Gong Lili,Luo Shuangjiang,Zhu Yihan,Shan Linglong,Fan Hongwei,Zhang Suojiang
Oriented metal-organic framework (MOF) membranes hold significant promise for advanced helium (He) separation, but their synthesis remains a challenging task. We report the preparation of an oriented MOF membrane using metal-organic polyhedra (MOP) fragment as metallocene-anchor. The metallocene-anchor induces the growth of homoligand Zr-MOF along the c-axis, resulting in the {001}-oriented structure. This orientation increases the transition energy barrier of methane (CH 4 ), enabling precise He/CH 4 separation with a selectivity of 77.3 and a He permeance of 695.1 GPU. The membrane exhibits exceptional robustness, demonstrating resistance to high-pressure conditions (up to 40 bar), thermal shock (−25 °C to 85 °C), and long-term stability (1000 h). The separation performance surpasses that of existing MOF membranes and exceeds the Robeson upper bound. Additionally, a three-stage membrane process enables the concentration of low He concentrations of 0.3% up to 99.9%, highlighting the potential of membranes for helium extraction. The successful fabrication of various oriented MOF membranes indicates the universality of this strategy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Communications Materials
·
2025
·Vol. 6
·期 1
·233
·
IF 9.6
Wang Ruoming,Yang Guangping,Yang Tianxiang,Lu Yuzheng,Raza Rizwan,Zhu Bin,Lund Peter D.,Yun Sining
High ionic conductivity at reduced temperatures may allow electrochemical cell applications to be efficiently scaled up. Herein, we introduce an approach that exploits electrode-electrode synergy and in situ structural transformation to increase the ionic conductivity of an electrolyte within the electrochemical cell. This transformation is based on the formation of a Li 2 TiO 3 -Li 2 CO 3 heterostructure electrolyte via the combination of a TiO 2 semiconductor precursor, polystyrene spheres as the soft skeleton, and the lithium-based electrode LiNi 0.8 Co 0.15 Al 0.05 O 2 . The unique surface and interface of the heterostructure electrolyte enable the formation of long-range ion transport channels that lower electrode impedance, resulting in a superior ionic conductivity of 0.23 S cm −1 at 550 °C and a high-power density of 1239 mW cm −2 . Our general method to form superionic electrolytes shows potential in fuel cell technologies.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED MICROBIOLOGY
·
2025
·
IF 3.2
Chen Yang,Yang Jian-xia,Yv Tian,Zhang Xin-rui,Gong Gui-zhen,Zhu Yuan-ting,Yao Jin,Wu Yi,Zhang Yv-han
AimsThis study aimed to investigate the capacity of lactic acid bacteria (LAB) isolated from yak calves to metabolize xylo-oligosaccharides (XOS) and to identify potential probiotic strains that could enhance the gut health of yak calves.Methods and ResultsLAB isolates were recovered from fifteen fecal samples collected from yak calves. Their capacity to utilize XOS as the sole carbon source was evaluated, and their metabolic characteristics, molecular mechanisms, and functional properties associated with XOS metabolism were examined through integrated phenotypic and genomic analyses. Consequently, forty-one LAB isolates were identified from ten of the fifteen yak calves and tested for XOS utilization. Among these, 51.22% (21/41) exhibited species- and strain-specific XOS utilization, including Limosilactobacillus mucosae (10 isolates), Lactobacillus brevis (10 isolates), and Lactiplantibacillus plantarum (1 isolates). L. mucosae YT200 showed the highest acid production (pH 4.50) and short-chain fatty acid accumulation, particularly acetic acid (745.00 ± 16.24 mM). Genomic analysis revealed three gene clusters encoding GH43 α-L-arabinofuranosidase, GH51 α-L-arabinofuranosidase, and GH43 β-xylosidase, enabling the hydrolysis of arabinosyl-substituted and linear XOS. Strain YT200 also demonstrated antagonism against common gut pathogens including Escherichia coli and Staphylococcus aureus, sensitivity to seven antibiotics, and no transferable resistance genes.ConclusionThis study reveals the mechanistic basis of XOS metabolism in L. mucosae YT200 and identifies L. mucosae YT200 as a promising candidate for synbiotic development.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Xiangrui Ren,Liyuan Ma,Diandian Wang,Liping Zhao,Haiyu Luo,Yanyun Hu,Wenhao Li
This study proposes a novel method for efficiently modifying native chitosan (NCS) by employing electron beam irradiation (EBI) in conjunction with citric acid (CA)-associated modification, thereby overcoming the limitations of NCS application, including poor solubility and restricted functionality. The results confirmed that EBI effectively reduced the apparent viscosity-average molecular weight of NCS and exposed more accessible sites, thereby facilitating subsequent CA-associated modification. Comprehensive analyses (FT-IR, XRD, DSC, and SEM) confirmed that the synergy of physical activation and chemical modification disrupted the hydrogen-bond network of NCS at the molecular level and reduced its crystallinity. These structural changes generated a porous morphology and significantly improved pH-dependent solubility stability, thereby preventing precipitation in neutral to alkaline environments. Antioxidant and antibacterial properties are also enhanced, which may be attributed to exposed active sites, CA-associated groups, and improved solution clarity. Ultimately, NCS derivatives with improved pH-dependent solubility stability, strong antioxidant activity, and excellent antibacterial performance were obtained. PCA suggested an association between apparent viscosity-average molecular weight reduction and functional improvement. These findings provide a feasible strategy for improving the applicability of chitosan in food-related systems.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Kaiwen Liang,Zihuan Zeng,Jingjing Yu,Qian Chen,Jingyi Li,Hui Wu,Lihui Chen,Yonghao Ni,Cuicui Ding,Min Zhang
Dural defects can trigger severe complications such as brain herniation and cerebrospinal fluid (CSF) leakage. Poreless structures like curing sealants are effective in preventing CSF leakage in dural defects but are often biologically inert. Here, we report a dura-inspired collagen hydrogel (DICH) consisting of dense–porous heterogeneous bilayers fabricated via a dual-channel freeze casting (abbreviated as Freezing-While-Lifting, FWL), which enables biocompatibility without compromising CSF sealing. The dense layer (DL) is formed through directional collagen molecular self-assembly followed by cross-linking, while the porous layer (PL) originates from collagen Pickering emulsion-templated self-assembly without cross-linking. By tuning collagen concentration and cross-linking density, the DL achieves optimized mechanical strength, whereas increasing the emulsification shear rate enhances pore interconnectivity and porosity in the PL. Compared with dense patches, DICH effectively prevents CSF leakage while promoting tissue compatibility and a minimal inflammatory response. At day 28, implantation studies in a rat model show histocompatibility comparable to that of the commercial DuraGen membrane, suggesting its potential as a dural substitute. This work establishes a facile biomimetic strategy for constructing dense–porous hydrogels with potential applications in tissue engineering.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Peiye Hua,Jiahao Li,Zerui Yu,Ye Song,Dujuan Wu,Meiling Chen,Jeonghun Kim,Song Li,Miao Zou,Junhui Yang,Wenkai Zhu
Nano-SiO 2 aerogel enhanced UV coatings for woodenware (UVCW) was studied. • Enhanced UVCW have high infrared reflectance in the atmospheric window. • Enhanced UVCW have outstanding radiative cooling performance. • Water resistance, adhesion, and abrasion resistance of UVCW was improved. Ultraviolet (UV) coatings for woodenware (UVCW) are widely applied in home furnishings, building materials, and interior decoration because of their rapid curing, high hardness, and low volatile organic compound (VOC) emissions. However, conventional UVCW lack passive daytime radiative cooling capability, restricting their use in energy-efficient applications. Herein, this work enhances the daytime radiative cooling performance of UVCW by incorporating nano-SiO 2 aerogel via direct blending method. The physicochemical properties and outdoor daytime radiative cooling effects of the UVCW before and after nano-SiO 2 aerogel reinforcement were comprehensively evaluated. Unlike conventional UVCW or SiO 2 nanoparticle coatings, this approach achieves an ultrahigh infrared emissivity of 94.95% in the 8–13 μm atmospheric window without complex multilayer structures. As a result, the nano‑SiO 2 aerogel reinforced UVCW realizes an average daytime temperature reduction of 6.4 °C outdoors, with a maximum cooling reduction of 10.4°C. This study not only demonstrates the potential for imparting passive daytime radiative cooling functionality to wood‑based materials but also provides a facile, scalable, and energy‑efficient strategy for developing advanced radiative cooling coatings. Download: Download high-res image (172KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL POLLUTION
·
2026
·
IF 7.2
Xiaomu Cao,Xuelong Cao,Yan Liu,Qiuning Hu,Qi Yan,Jiahe Zhuang,Yuqing Liang,Yongming Luo,Defu He
Isocyanate chemicals, commonly incorporated into polymer materials, are highly reactive and toxic, yet their abundance in soil matrices remains largely unknown. This study aimed to investigate the occurrence, spatial distribution, and influencing factors of typical isocyanates in soils. We investigated hexamethylene diisocyanate (HDI) and toluene diisocyanate (TDI, including 2,4-TDI and 2,6-TDI), in surface soils from 73 sites across China. Results demonstrated prevalent isocyanate contamination, with an 83. 6% detection rate and concentrations of 29.7-216.0 ng/g for HDI. While mean concentrations were 47.8 ng/g and 41.5 ng/g for 2,4-TDI and 2,6-TDI, with detection rates of 34.2% and 13.7%, respectively. Isocyanate contamination was high in soils near landfills and construction sites, but notably widespread in agricultural soils, especially plastic-mulched farmlands. The concentration of HDI and 2,4-TDI presented gradually decreasing trends with the increase of soil depth. Controlled incubation experiments showed that isocyanates exhibited distinct biphasic decay patterns, rapid phase followed by prolonged persistence in soils, and their stability was negatively correlated with soil moisture and organic matter content but positively linked to soil pH value. These findings reveal emerging and prevalent soil isocyanate contamination, warranting further evaluation of their ecological risks and environmental impacts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Haiyan Cao,Bin Yang,Wenfei Dong,Wenbing Shi
Background The accurate detection of 2,3,5,6-tetramethylpyrazine (TMP) in complex matrices is significant for food quality control and biomedical analysis. Despite this need, a dedicated optical sensing platform for TMP has not been reported to date. Results Here, we present a novel ratiometric fluorescent probe based on a Tb–EDTA complex, which introduces a sensing strategy founded on coordination-induced modulation of the ligand-to-metal charge transfer (LMCT) process. Specific coordination of TMP's pyrazine nitrogen atoms to the Tb 3+ center results in a characteristic ratiometric response: quenching of the emission at 548 nm and concomitant enhancement at 650 nm. The probe exhibits excellent analytical performance with a linear range of 0.1―40 μM, a detection limit of 0.038 μM, and high selectivity over structurally similar interferents. Its practical applicability is demonstrated by reliable quantification of TMP in real samples, including sauce-flavor Baijiu, sake, and human urine, with recoveries of 94.54–104.82% and relative standard deviations below 10.57%. Significance This work establishes a pioneering optical sensing approach for TMP detection, providing a valuable analytical tool for flavor assessment in alcoholic beverages and pharmacological monitoring in biological systems.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Hazardous Materials Advances
·
2026
·
IF 9.1
Wenqi Li,Ying Cao,Quanzhen Yang,He Liu,Stefanos Giannkis,Jin Jiang
UVA-driven iron-mediated sulfite advanced oxidation processes have demonstrated high efficiency in degrading organic pollutants, yet their potential for microbial inactivation remains underexplored. This study systematically investigates the disinfection performance and mechanism of a UVA/Fe(III)/sulfite system using Escherichia coli ( E. coli ) as a model bacterium. The ternary system exhibited synergistic bactericidal activity, achieving complete inactivation of 10 6 CFU/mL E. coli within 45 min at pH 5.6, significantly outperforming individual or binary controls. Radical quenching and electron paramagnetic resonance (EPR) analyses identified sulfate radicals ( SO 4 • − ) , hydroxyl radicals ( • OH ) , superoxide ( O 2 • − ) , and peroxymonosulfate radicals ( SO 5 • − ) as the primary reactive species, generated via a sustained photochemical Fe(II)/Fe(III) redox cycle. Mechanistic investigations revealed a multi-target oxidative cascade: initial disruption of cell envelope integrity and lipid peroxidation facilitated intracellular radical influx, leading to rapid adenosine triphosphate (ATP) depletion, inactivation of antioxidant enzymes (superoxide dismutase (SOD) and catalase (CAT)), and oxidative deoxyribonucleic acid (DNA) lesions. Disinfection efficiency increased with decreasing pH, and was promoted by elevated dissolved oxygen. While chloride and nitrate exhibited moderate interference, phosphate and humic acid severely inhibited inactivation through Fe(III) precipitation and radical scavenging/light screening, respectively. These findings elucidate the inactivation pathways of the UVA/Fe(III)/sulfite system, establishing a theoretical foundation for its application as a cost-effective, solar-driven water disinfection strategy.
✓ 已验证
产品关联
DOI
高影响因子