文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第649至660个,产品总数1,091个

设置提升方向
K
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2017 · IF 2.323

Solid–Liquid Phase Equilibrium of N,N′-Piperazinebis(neopentylglycol)phosphoramidate in Selected Solvents from T = (293.15 to 333.15) K

Dong-Fang Zhao,Li-Sheng Wang,Jian Sun,Chuan-Ming Chen

A phosphorus flame retardant named N,N′-piperazinebis(neopentylglycol)phosphoramidate (PBNGP) was synthesized and characterized by elemental analysis, Fourier transform infrared spectroscopy, mass spectra, and nuclear magnetic resonance. Its thermal properties were evaluated via thermogravimetric analysis and differential scanning calorimetry. The solubilities of PBNGP in selected solvents at T = (293.15 to 333.15) K and atmospheric pressure were measured via a static-analytic method. The experimental data were correlated with Scatchard–Hildebrand, Buchowski-Ksiazczak, Wilson, nonrandom two liquid, and universal quasichemical equations. The calculated results showed that all of these models can reproduce the experimental data well, and the Wilson model gives the best correlation, with an overall relative standard deviation of 0.70%. The solubility parameter of PBNGP was calculated using the Scatchard–Hildebrand methodology.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2014 · IF 2.045

Activity Coefficients of [Cnmim]Br (n = 3 to 8) Ionic Liquids in Aqueous Fructose Solution at T = 298.15 K

Kelei Zhuo,Hao Ren,Yujing Wei,Yujuan Chen,Jingjing Ma

Activity coefficients of the 1-alkyl-3-methylimidazolium bromide [Cnmim]Br (n = 3 to 8) ionic liquids (ILs) in fructose + water mixed solvents at 298.15 K were determined by cell potential measurements. The molalities of [Cnmim]Br ranged from (0.005 to 0.1) mol·kg–1 and those of fructose from (0.2 to 0.8) mol·kg–1. Gibbs free energy interaction parameters were also obtained together with salt constants. The interactions between [Cnmim]Br and fructose are mainly controlled by electrostatic interactions. Gibbs free energy interaction parameters (gES) and salting constants (kS) are negative for the ILs (n = 3 to 6), indicating fructose are salted-in by the ILs in water, whereas fructose are salted-out by the ILs (n = 7 and 8).

CAS / MDL: 84-74-2 143-66-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2013 · IF 2.004

Densities, Viscosities and Excess Properties of Binary Mixtures of 1,1,3,3-Tetramethylguanidinium Lactate + Water at T = (303.15 to 328.15) K

Shidong Tian,Shuhang Ren,Yucui Hou,Weize Wu,Wei Peng

Densities and viscosities of 1,1,3,3-tetramethylguanidium lactate ([TMG]L) (1) + H2O (2) with different compositions were determined at temperatures from (303.15 to 328.15) K. Densities of [TMG]L (1) + H2O (2) decrease with the increase of temperature. However, when the mole fraction of water is lower than 0.5, the water content does not have an obvious influence on the density of [TMG]L. When the mole fraction of water is greater than 0.5, the densities of [TMG]L (1) + H2O (2) decrease obviously with further increasing the mole fraction of water. Viscosity of [TMG]L decrease dramatically with the increase of temperature and the water content. Excess molar volumes (VE) and viscosity deviations (Δη) of the binary mixtures were calculated by the experimental data and fitted to the Redlich–Kister equation with four parameters. The result shows that the values of VE and Δη for the binary mixtures are negative over the whole composition range and temperatures from (303.15 to 328.15) K. The negative of the excess properties indicates a strong interaction between the ionic liquid and water. The partial molar volumes (V̅i), excess partial molar volumes (V̅iE), Gibbs energy of activation for viscous flow (ΔG*), and excess Gibbs energy of activation for viscous flow (ΔG*E) of the binary mixtures were also calculated based on the densities and viscosities data. Besides, the Jouyban–Acree model was used to correlate the densities and viscosities of the binary mixtures with respect to the mixture composition and temperature simultaneously.

CAS / MDL: 141-43-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLID STATE CHEMISTRY · 2015 · IF 2.133

Hydrothermal synthesis, structures and optical properties of A2Zn3(SeO3)4·XH2O (A=Li, Na, K; X=2 or 0)

Yunsheng Liu,Dajiang Mei,Jingli Xu,Yuandong Wu

New alkali metal zinc selenites, A 2 Zn 3 (SeO 3 ) 4 · X H 2 O (A=Li, Na, K; X =2 or 0) were prepared through hydrothermal reactions . Li 2 Zn 3 (SeO 3 ) 4 ·2H 2 O ( 1 ) crystallizes in the monoclinic space group P 2 1 / c with lattice parameters a =8.123(4), b =9.139(4), c =7.938(3)   Å, β =112.838(9)°. Na 2 Zn 3 (SeO 3 ) 4 ·2H 2 O ( 2 ) crystallizes in the monoclinic space group C2/c with lattice parameters a =15.7940(18), b =6.5744(8), c =14.6787(17) Å, β =107.396(3)°. K 2 Zn 3 (SeO 3 ) 4 ( 3 ) crystallizes in the monoclinic space group C2/c with lattice parameters a =11.3584(12), b =8.6091(9), c =13.6816(14)   Å, β =93.456(2)°. The anionic structures are composed of [Zn 3 O 12 ] 18− sheets, chains, and “isolated” units in compound 1, 2, 3, respectively, and trigonal pyramids SeO 3 2− . The compounds were characterized by the solid state UV–vis–NIR diffuse reflectance spectroscopy , infrared spectra and thermogravimetric analysis .

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLUTION CHEMISTRY · 2013 ·Vol. 42 ·期 10 ·1879-1887 · IF 1.128

Measurement and Correlation of the Solubility of N-Acetylglycine in Different Solvents at Temperatures from 278.15 to 319.15 K

Guo Song,Yang Wenge,Hu Yonghong,Wang Kai,Luan Yuanyuan

The solubility of N -acetylglycine was measured in methanol, ethanol, propanol, isopropanol, n -butanol and ethyl formate in the temperature range between 278.15 and 319.15 K under atmospheric pressure by a gravimetric method. The solubility of N -acetylglycine in those selected solvents increases with increasing temperature. The solubility data were correlated with the van’t Hoff equation, the modified Apelblat equation and the λh equation to obtain the corresponding model parameters. The experimental results could be useful for optimizing the industrial process of purification of N -acetylglycine.

CAS / MDL: 543-24-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS · 2015 · IF 2.979

A novel fluorescence aptasensor for 8-hydroxy-2′-deoxyguanosine based on the conformational switching of K+-stabilized G-quadruplex

Hui Liu,Yong-Sheng Wang,Xian Tang,Hui-Xian Yang,Si-Han Chen,Hui Zhao,Shan-Du Liu,Yu-Feng Zhu,Xiao-Feng Wang,Yan-Qin Huang

A sensitive, lable-free and low cost fluorescence aptasensor was developed for detecting 8-hydroxy-2′-deoxyguanosine (8-OHdG) by using 8-OHdG aptamer (Apt) as a recognition probe and N-methyl mesoporphyrin IX (NMM) as a reporter. The method is based on the conformational switching of a K + -stabilized G-quadruplex to a 8-OHdG-stabilized one. NMM can selectively bind to K + -stabilized G-quadruplex instead of 8-OHdG-stabilized one. The addition of 8-OHdG in the solution of Apt - K + ions leads to a sharp change in fluorescence intensity, which showed a good linear response toward 8-OHdG concentration ranging from 3.96   nM to 211   nM with a detection limit of 1.19   nM. The relative standard deviation and the recovery were 1.23–3.26% ( n   =   11) and 94.8–106.7%, respectively. The proposed aptasensor consists of only an aptamer probe and a specific dye NMM, avoiding the complex and expensive labeling procedure. Thus it is much cheaper and more applicable.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2017 · IF 2.323

Phase Diagrams and Physicochemical Properties for the Ternary System (CsCl + NaCl + H2O) at T = (298.15, 308.15, and 318.15) K

Yunxue Gao,Shuni Li,Quanguo Zhai,Yucheng Jiang,Mancheng Hu

Complete phase diagrams and physico-chemical properties for the ternary system (CsCl + NaCl + H2O) were determined at T = (298.15, 308.15, and 318.15) K, respectively. The X-ray diffraction method and Schreinemaker’s wet residue method were used to verify the solid phase. The phase diagrams show this ternary system is a complex type. Three crystallization regions were found corresponding to the single salt NaCl, a compound CsCl·2NaCl·2H2O, and a solid solution series [Cs1–x(Na·H2O)x]Cl (x in [Cs1–x(Na·H2O)x]Cl changed from 0 to 0.43 (298.15 K), 0.39 (308.15 K), and 0.36 (318.15 K) at each temperature. With rising temperature, the crystallization area of NaCl increased, but CsCl·2NaCl·2H2O and [Cs1–x(Na·H2O)x]Cl decreased simultaneously. However, density and refractive index increased with increasing CsCl concentration.

CAS / MDL: 143-66-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2024 · IF 3.9

Fabrication of N/K-doped TiO2-Ag nanospheres with efficient charge transfer for enhanced photocatalytic CO2 reduction into CH4

Yinan Ren,Wei Li

Solar-driven CO 2 reduction into hydrocarbon fuels has a great potential for mitigating the issues of greenhouse effect and fossil energy crisis we are currently facing. It is a great challenge for visible-light-driven photocatalytic CO 2 reduction into CH 4 with high selectivity and conversion efficiency. Herein, we report a synthesis of N/K-doped TiO 2 nanospheres with Ag nanoparticles decoration (N/K-TiO 2 -Ag) by a solvothermal method and study its photocatalytic CO 2 reduction performance. It is found that the N/K-TiO 2 -Ag composite exhibits superior photocatalytic CO 2 reduction into CH 4 yield and selectivity than K-TiO 2 and N/K-TiO 2 . Indeed, the N/K-TiO 2 -Ag-0.5 sample shows the highest CH 4 yield with rate of 113.84 μmol g −1 h −1 and selectivity of CH 4 (93.71%) under light irradiation. The enhancement might be attributed to the synergy of N/K doping and silver loading. In particular, the N/K doping and the Ag cocatalysts introducing triggered improvement of solar energy utilization and charge separation as well as Ag-induced SPR effect and the K + -induced redistribution of photogenerated charge carriers cooperatively promotes photocatalytic CO 2 conversion into CH 4 . It is expected this work would offer a guide for rational design of K/TiO 2 -based photocatalyst for selectively converting CO 2 into fuels.

CAS / MDL: 14402-67-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING · 2024 ·Vol. 130 ·期 4 ·1-10 · IF 2.5

Improving the luminescence intensity of Mn2+ doped B-P-Zn-K based glass–ceramics through tuning structure of Mn2+

Song Wenqiang,Zhao Fengjiao,Xu Changyuan,Wang Qun,Yin Hongming

For photoluminescence (PL) properties of Mn 2+ in glass–ceramics are highly dependent on the concentration of Mn 2+ , we experimentally observed the change of Mn 2+ structures from isolated Mn 2+ ion as a tetrahedron, octahedron to Mn 2+ -Mn 2+ dimer in B-P-Zn-K based glass–ceramics with characteristic PL peaks locating at 504 nm, 600 nm, and 660 nm, respectively. Spectral results reveal that condensed Mn 2+ would lead to redshift of PL emission and reduced Luminous intensity caused by concentration quenching, however, with increasing Mn 2+ content, shift of Mn 2+ structure is the determining factor for PL redshift. Moreover, compared with tetrahedral and octahedral Mn 2+ , Mn 2+ -Mn 2+ dimer exhibits highly enhanced PL emission and shortened life span which reveal that transitions of Mn 2+ -Mn 2+ dimer are far more efficient than those transitions in tetrahedral and octahedral Mn 2+ . This enables tuning of color and efficiency of PL emission for Mn-doped glass–ceramics via a simple method. Graphical abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Polymer Materials · 2024 · IF 4.4

Bismaleimide and Biobased Limonene Copolymer Microspheres as Reactive Fillers to Fabricate Low-k, High-Toughness Cyanate Ester Resin Composites

Dan Zhao,Dong Chen,Yuhong Ma,Wantai Yang

Bismaleimide and biobased copolymer microspheres (BMPL) of bis[4-(4-maleimidoyloxy)phenyl]propane (BMIP) and limonene (LIM) with different compositions are synthesized via self-stabilizing precipitation copolymerization and applied as reactive modifiers of 2,2-bis(4-cyanatophenyl) propane (BADCy) resin. Due to the different reactivities of exo- and endocyclic vinyl groups in the LIM monomer, the content of the vinyl groups in the BMPL can be simply tuned by copolymerization temperature. There are some endocyclic double bonds of LIM in BMPL prepared at 75 °C but no observable endocyclic double bonds in BMPL prepared at 130 °C. The presence of LIM endocyclic double bonds in BMPL microspheres can effectively reduce the curing temperature of BADCy resin via the formation of chemical bonds between the BADCy matrix and BMPL microspheres but without expensing the heat resistance of the composites. The dielectric constant (ε) and dielectric loss (tan δ) of the BMPL/BADCy composite with the addition of 10 wt % of BMPL are 2.67 and 0.0034, respectively, at 106 Hz, which was much lower than those of pure BADCy (2.87, 0.0054). In addition, the maximum impact strength of the BMPL/BADCy composite at 10 wt % BMPL loading is 18.21 kJ/m2, which is 88.3% higher than that of pure BADCy. The BMPL/BADCy composite demonstrates low-k dielectric properties, high toughness, and thermal stability and has potential in the fields of electronic communication, aerospace, and aviation.

CAS / MDL: 1156-51-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2025 · IF 2.1

Speed of Sound Measurements in Cyclopentane at Temperatures from (349 to 526) K and Pressures up to 10.0 MPa

Wenyu Li,Kexin Ren,Hongyu He,Zhao Lei,Yuhang Chen,Maogang He,Ying Zhang

Cyclopentane is an excellent working fluid in high-temperature organic Rankine cycle (ORC) systems. Currently, experimental measurements of the speed of sound in cyclopentane at temperatures above 353 K are not available in the literature. In this study, the speed of sound in cyclopentane is measured by the Rayleigh–Brillouin scattering method. Using the existing experimental equipment, the data are measured along six isobaric lines from 2.0 to 10.0 MPa at a temperature range of 349.40 to 525.97 K. The expanded relative uncertainty of the speed of sound measured in this experiment can be estimated to be 0.86% with the confidence level of 0.95 (coverage factor k = 2). The average absolute relative deviation (AARD) between our experimental data and calculated values with the equation of state (EOS) proposed as mentioned in this paper in the liquid-phase region is 0.99%, which confirms the effectiveness of the experimental results and the accuracy of the EOS. Furthermore, the data on the speed of sound from experimental results and the literature for cyclopentane are also fitted into a correlation formula related to the temperature and pressure, facilitating engineering applications.

CAS / MDL: 287-92-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Multimetallic intra-nanogap nanozyme-mediated lateral flow immunoassay for ultrasensitive and multimode detection of K. pneumonia in clinical samples

Weixia Zhi,Xinjie Guo,Yichu Nie,Lu Nie,Tingting He,Li Dai,Jing Xu,Xiangxin Zong,Jun Xu,Huaihong Cai,Yong Tang,Yanguang Cong,Jiang Pi,Youfeng Zhu,Pinghua Sun,Jialiang Guo,Huoqiang Chen,Xueqin Huang,Haibo Zhou

The current lack of rapid screening methods for Klebsiella pneumonia ( K. pneumonia ) poses a considerable threat to human health. Herein, we fabricated a multilayer Au@Au@Ag/Pt nanoparticle (NP) that made of the peroxidase-mimicking external shell and tunable plasmonic intra-nanogap as a versatile probe, and conjugated them with lateral flow immunoassay (LFIA) for colorimetric-catalytic-SERS (CM/CL/SERS) multi-model sensing K. pneumonia in complex biological matrix. After the optimization of several parameters, the limit of detection (LOD) of the target K. pneumonia were 10 3  CFU/mL for CL-LFIA and 38 CFU/mL for SERS-LFIA, both of which were over 10-fold and 200-fold more sensitive than the visual CM-LFIA (10 4  CFU/mL), respectively. The clinical validation of this multi-model LFIA was performed with the infected patients ( N  = 6) and healthy subjects ( N  = 3), among which 4 positive samples missed by conventional CM-LFIA were successfully identified by SERS-LFIA. More importantly, this LFIA has great specificity for the target bacteria, while showed no signal response to samples infected by other bacteria. Different from previous studies focusing on detection of protein and nucleic acid of K. pneumonia , our study shortened the sample-to-answer time with direct detection of K. pneumonia by LFIA, filling the diagnostic gap for point-of-care testing (POCT) of K. pneumonia infection. Overall, the great performance of our established LFIA suggested its substantial potential for diagnosis of K. pneumonia -induced nosocomial infection.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。