COMBUSTION AND FLAME
·
2024
·
IF 5.8
Hong Wang,Bingzhi Liu,Qiang Xu,Shijun Dong,Zhandong Wang,Long Zhu
Cyclopentanone (CPN) is a widely available biofuel with excellent combustion properties, but detailed speciation profiles during its pyrolysis have rarely been studied. This work examines the pyrolysis of CPN in a jet-stirred reactor (JSR) at atmospheric pressure, with residence time of 2 s and a temperature range from 830 K to 1100 K. Dozens of pyrolysis intermediates and products were measured using synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) and gas chromatography (GC). Among them, several new species were observed, including water, carbon dioxide , formaldehyde, indene , 1,2-dihydroindene, naphthalene , 1,2-dihydronaphthalene, 1-methylnaphthalene, acenaphthylene , biphenyl , and fluorene . A detailed kinetic model was developed based on the literature, and in general, it predicted the experimental results for most species well. Kinetic analyses indicated that the consumption of CPN was controlled by the bimolecular reactions with H atom. The formation of water, carbon dioxide and formaldehyde could be explained by the reaction pathways of OH radical. The pyrolysis of CPN yielded a significant number of alkenes and alkynes at higher temperatures; the bimolecular addition reactions of these species with resonantly stabilized radicals are important to the formation of polycyclic aromatic hydrocarbons (PAHs). Based on those, this work provides valuable insights into CPN pyrolysis chemistry and it promotes the development of a comprehensive CPN combustion model.
研究领域:
燃烧化学
·
能源化学
·
反应动力学
·
分析化学
·
环境化学
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2018
·
IF 2.751
Yuzhen Duan,Junming Guo,Mingwu Xiang,Jinyu Zhu,Changwei Su,Hongli Bai,Xiaofang Liu,Wei Bai,Rui Wang
A series of single crystalline spinel LiNi x Mn 2- x O 4 (0 ≤ x ≤ 0.10) cathode materials were synthesized in virtue of a facile solution-combustion approach. The morphology and the structure of all as-prepared samples were synthetically investigated with the X-ray diffraction (XRD), the scanning electron microscopy (SEM), the high-resolution transmission electron microscopy (HRTEM), and the X-ray photoelectron spectrometer (XPS). According to these investigation results, Ni-doping content has a significant impact on the control of morphology and crystalline structure, hence the as-prepared LiNi x Mn 2- x O 4 samples exhibit polyhedral morphology with high crystallinity and average size of 100–200 nm. This unique polyhedral crystal structure has numerous surfaces fitting the (111) crystalline orientation which exhibit the smallest Mn dissolution in electrolytes, whilst stabilizing the spinel framework. Owing to the merits of both single crystalline polyhedral structure and appropriate Ni-doping, the as-obtained LiNi x Mn 2- x O 4 cathodes reveal enhanced rate capability coupled with long cycling performance. In especial, the LiNi 0.08 Mn 1.92 O 4 presents a initial discharge capacity of 101.3 mAh/g and ultralong cycle stability up to 2000 cycles at 1C, whilst showing enhanced cycle performance when temperature increases to 55 °C. Excellent capacity retention of 72% and 63% is also obtained after 1000 cycles even at high current rate of 5C and 10C. This study may contribute to an effective candidate approach for the obvious improvement on lithium ion batteries in term of electrochemical activity.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
纳米材料
·
固态化学
·
电池技术
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2023
·Vol. 129
·期 10
·682
·
IF 2.7
Yin Chunmei,Li Qinghua,Lu Zhiyi,Shi Yaochen,Lin Wei
A highly sensitive pressure-sensitive sensor based on MXene was developed using the electrostatic self-assembly method, with carbide sponges as the elastic substrate and a rational design. Specifically, CTAB was used to treat the carbide triamine sponge and conduct the electrostatic self-assembly with MXene to achieve a tightly combined conductive filler and substrate. The resulting pressure sensor showed excellent performance, with a high sensitivity of 15.05 kPa −1 under a range of 0–20 kPa, a response time of 0.1 s, and high durability under 2000 loading–unloading cycles. The minimum detection limit of the sensor was as low as 0.3 Pa, demonstrating excellent monitoring performance. Additionally, finite-element simulation analysis showed that MXene@CTAB@CMF had even better sensing performance at the same stress level. Moreover, the pressure sensor exhibited good sensing performance for various physiological signals and daily work monitoring of the human body, indicating its potential application value.
研究领域:
生物医学工程
·
纳米医学
·
柔性电子学
·
传感技术
·
材料科学
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 7
·1804974
·
IF 10.856
Na Li,Pingping Wei,Linan Yu,Junyi Ji,Jiupeng Zhao,Chuanbo Gao,Yao Li,Yadong Yin
The dynamic optical switch of plasmonic nanostructures is highly desirable due to its promising applications in many smart optical devices. To address the challenges in the reversibility and transmittance contrast of the plasmonic electrochromic devices, here, a strategy is reported to fabricate color switchable electrochromic films through electro-responsive dissolution and deposition of Ag on predefined hollow shells of Au/Ag alloy. Using the hollow Au/Ag alloy nanostructures as stable seeds for site-specific deposition of Ag, elimination of the random self-nucleation events is enabled and optimal reversibility in color switching is allowed. The hollow structure further enables excellent transmittance contrast between the bleached and colored states. With its additional advantages such as the convenience for preparation, high sensitivity, and field-tunable optical property, it is believed that this new electrochromic film represents a unique platform for designing novel smart optical devices.
研究领域:
材料科学
·
纳米科技
·
光学工程
·
功能材料
·
电化学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2012
·Vol. 1
·期 6
·2278-2285
·
IF 0
Jun Zhou,Ming Chen,Guowang Diao
An amphiphilic amino resorcinarene (T) was modified onto the surface of graphene oxide (GO) through covalent bond forces and non-covalent bond forces to prepare GO–T. The water-soluble graphene–T (GN–T) composite was prepared by the reduction of GO–T. Then, pre-prepared platinum nanoparticles (PtNPs) and different sized gold nanoparticles (AuNPs) could self-assemble onto the surface of GN–T through the plentiful amido groups of T to obtain GN–T–AuNPs and GN–T–PtNPs hybrid materials. It was verified that the AuNPs and PtNPs could be uniformly scattered on GN and the amount of AuNPs and PtNPs modified on GN could be adjusted by changing the weight ratio of T/GO. GN-T-PtNPs and GN-T-AuNPs composites showed the characteristics of being dispersible, stable and recyclable in water. Electrochemical results obviously revealed that GN–T–AuNPs and GN–T–PtNPs composites exhibited outstanding electrocatalytic properties.
研究领域:
纳米材料化学
·
电分析化学
·
功能复合材料
·
表面自组装
·
电催化
✓ 已验证
DOI
JOURNAL OF POWER SOURCES
·
2018
·
IF 6.945
Zhaomin Wang,Yong Cheng,Qian Li,Limin Chang,Limin Wang
Metallic Sb is deemed as a promising anode material for lithium ion batteries (LIBs) due to its flat voltage platform and high security. Nevertheless, the limited capacity restricts its large-scale application. Therefore, a simple and effective method to explore novel antimony trioxide with high capacity used as anode material for LIBs is imperative. In this work, we report a facile and efficient strategy to fabricate 1D hollow Sb 2 O 3 @TiO 2 composites by using the Kirkendall effect . When used as an anode material for LIBs, the optimal Sb 2 O 3 @TiO 2 composite displays a high reversible discharge capacity of 593 mAh g −1 at a current density of 100 mA g −1 after 100 cycles and a relatively superior discharge capacity of 439 mAh g −1 at a current density of 500 mA g −1 even after 600 cycles. In addition, a reversible discharge capacity of 334 mAh g −1 can also be obtained even at a current density of 2000 mA g −1 . The excellent cycling stability and rate performance of the Sb 2 O 3 @TiO 2 composite can be attributed to the synergistic effect of TiO 2 shell and hollow structure of Sb 2 O 3 , both of which can effectively buffer the volume expansion and maintain the integrity of the electrode during the repeated charge-discharge cycles.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
无机化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2022
·
IF 3.841
Qi Wang,Shaopeng Fu,Xingyao Yang,Qinghao Sun,Junwei Zhang,Yichun Peng,Rongling Zhang,Zezhou Liang,Jianfeng Li
An organic nitrogen/oxygen-rich polymer (PFN-NDIN) was prepared via Suzuki reaction between 2,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9,9-bis(3-N,N- dimethylaminopropyl)-9H-fluorene (FNB) and 4,9-dibromo-2,7-bis(3-(dimethyl-amino)propyl)naphthalenediimide (NDINBr 2 ) and utilized as a new inhibitor for HRB400 steels corrosion in alkaline medium of simulated concrete pore solution. The inhibition efficiency of this inhibitor was evaluated by electrochemical techniques. The electrochemical impedance spectroscopy (EIS) results showed that the protective capacity of PFN-NDIN on HRB400 steel increased with increasing concentration to attain 92.85% efficacy with 400 ppm at 288 K. Potentiodynamic polarization (PDP) plots indicated that PFN-NDIN is effective and acts as a hybrid inhibitor. The adsorption behavior of PFN-NDIN was fitted and found to follow the Langmuir isothermal adsorption line, with discussion of the relevant thermodynamic parameters. The effect of temperature on this inhibitor's the rust-inhibiting effect was investigated. The surface was then studied, showing that the interfacial corrosion of HRB400 steel was inhibited by PFN-NDIN molecules. The relationship between PFN-NDIN molecules’ structure and the inhibition efficiency was investigated by quantum chemical calculations. Several parameters were calculated, the findings revealed that the prepared materials correlated well with their electronic contribution capability.
研究领域:
材料腐蚀与防护
·
高分子化学
·
电化学
·
建筑材料科学
·
表面科学
·
量子化学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2014
·Vol. 2
·期 34
·13859-13867
·
IF 0
Chengxin Peng,Huixin Chen,Qiongyu Li,Weiwei Cai,Qin Yao,Qingsheng Wu,Jinhu Yang,Yong Yang
The silicon material is the most promising candidate for developing new-generation lithium-ion batteries with high energy and power output. However, there remains a significant challenge due to poor electrical conductivity and pulverization of the silicon based anode during cycles. Aiming to solve these problems, in this work we fabricate a novel 3D composite architecture made of a Si@SiOx core–shell nanowire array grown on a 3D graphitic foam (Si CNW–3D GF) substrate by a well-designed multiple-step approach. The prepared Si CNW–3D GF composite shows the integrated advantages for high-performance lithium ion batteries, including its light weight, open macroporosity, high conductivity, high Si NW loading, excellent flexibility as well as SiOx buffer layers. As a result, the Si CNW–3D GF composite exhibits excellent performance such as high reversible lithium storage capacity (3603 mA h g−1 at a current density of 840 mA g−1), excellent cycling performance (up to 100 cycles) and superior rate capability (2299 mA h g−1 at 4200 mA g−1 and 1206 mA h g−1 at 8400 mA g−1), which is 2 times that of the Si CNW electrode where Si CNWs were grown directly on a stainless steel current collector without the presence of 3D GF.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
·
电池技术
✓ 已验证
DOI
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Xiaozhen Chen,Ji Qi,Pan Wang,Chuang Li,Xiao Chen,Changhai Liang
Herein, PVA-Mo 2 C/Mo 2 N nanospheres with surface roughness are synthesized via a polyvinyl alcohol (PVA) involved approach and used for hydrogen evolution reaction (HER). The average crystallite size of the PVA protected nMo 2 CN nanospheres (6.1 nm) is one third of that of the PVA-Mo 2 C/Mo 2 N without PVA protection (17.9 nm). At 10 mA cm −2 current density, the as-synthesized PVA-Mo 2 C/Mo 2 N nanospheres with surface roughness exhibit HER overpotentials of 132 mV and 142 mV with corresponding Tafel slope of 51.8 mV dec −1 and 50.4 mV dec −1 in acid and alkaline medium, respectively. This high apparent activity can be attributed to the high intrinsic activity originated from the adjacent surface active sites of Mo 2 C and Mo 2 N as well as the large ECSA of PVA-Mo 2 C/Mo 2 N nanospheres with surface roughness.
研究领域:
材料科学
·
电化学
·
纳米催化
·
能源化学
·
表面科学
✓ 已验证
DOI
高影响因子
Advanced Materials Interfaces
·
2020
·Vol. 7
·期 7
·1901815
·
IF 4.948
Minglong Yang,Qiang Wei,Jianjun Li,Yao Wang,Hongfei Guo,Liya Gao,Li Huang,Xiaodong He,Yibin Li,Ye Yuan
Inspired by the traditional Chinese “pancake-making” method, the efficient electromagnetic interferences (EMI) shielding composite carbon films are conveniently obtained by assembling graphene oxide (GO) sheets, carbon nanotubes (CNTs), and Co/C nanocomposites into a laminated “nacre-like” structure. The developed composite carbon films are characterized by a shielding effectiveness (SE) up to ≈51 dB in X band with a small thickness of ≈34.3 µm. Moreover, the composite carbon film shows favorable flexibility and the SE values almost keep a constant after repeatedly bending test. These results demonstrate a promising approach to simply fabricate a flexible and highly efficient EMI shielding material.
研究领域:
材料科学
·
纳米科技
·
复合材料
·
电磁功能材料
·
柔性电子学
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2019
·
IF 2.961
Run Wang,Yue Zhang,Fu-Xing Yu,Yajie Dong,Ya-Lan Jia,Xing-Juan Ma,Qiang Xu,Yanhong Deng,Zu-Hong Xiong,Chun-Hong Gao
An efficient perovkite light-emitting diode (PeLED) is fabricated by incorporating 1,3,5-tri (m-pyrid-3-yl-phenyl)benzene (TmPyPB) between the emitting layer (EML) and the electron transporting layer (ETL), where TmPyPB plays an indispensable blocking effect on both excitons and holes. It shows a maximum current efficiency of 9.37 cd/A, and the corresponding external quantum efficiency (EQE) of 2.42% with a saturated green color Commission International de I'Eclairage (CIE1993) coordinated of (0.1279, 0.7951) under a driving voltage of 6 V. Meanwhile, the operational lifetime of the TmPyPB-based PeLED is improved to about 2.6-fold to that of the one with only the traditional ETL of aluminum 8-hydroxyquinolinate (Alq 3 ). The enhancements of electroluminescence (EL) performance are mainly attributed to better confinement of both the holes and the excitons in the EML, and more balanced carrier transportation in the TmPyPB-based PeLED. This work offers a feasible strategy to develop high performance optoelectronic devices.
研究领域:
材料科学
·
光电子学
·
纳米技术
·
半导体器件
·
功能材料
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 21
·7143-7151
·
IF 4
Lu Liang,Xiaohui Li,Xiaoge Wang,Zhaoji Luo,Kun Lin,Qiang Li,Sihao Deng,Lunhua He,Xiaojun Kuang,Xianran Xing
Mixed electronic and oxide ionic conduction was enabled in digermanate-type La2−xCaxGe2O7−x/2 containing Ge3O10 chains and isolated GeO4 units by substitution of La3+ with Ca2+. The structure and solid solution limit of Ca doped La2Ge2O7 were studied by systematic experiments, including rotation electron diffraction (RED), X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments, etc. The preferred occupation of Ca2+ and oxygen vacancies was investigated by Rietveld analysis of the NPD data. The obtained conducting material La1.925Ca0.075Ge2O6.963 exhibits superior thermal stability and an order of magnitude improvement in conductivity compared to the parent La2Ge2O7 (∼9 × 10−5 S cm−1 at 1000 °C). BVEL calculations reveal that the oxygen vacancies were stabilized and transported within the framework of La2Ge2O7 by sharing oxygen and oxygen exchange between the adjacent Ge3O10 chains and GeO4 units, exhibiting a three-dimensional oxide ion transport nature.
研究领域:
无机化学
·
固态离子学
·
功能材料
·
结构化学
·
能源材料
·
晶体化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）