Acta Biomaterialia
·
2017
·
IF 6.319
Chuanxiong Nie,Ye Yang,Chong Cheng,Lang Ma,Jie Deng,Lingren Wang,Changsheng Zhao
The design of self-sterilizing surfaces with favorable biocompatibility is acknowledged as an effective approach to deal with the bacterial infections of biomedical devices. In this study, we report an intriguing protocol for the large-scale fabrication of self-sterilizing and biocompatible surface film coatings by using polymer shielded silver nanoparticle loaded oxidized carbon nanotube (AgNPs@oCNT) nano-dispersions. To achieve the antibacterial coatings, the bioinspired positively charged and negatively charged AgNPs@oCNTs were alternately deposited onto substrates by spray-coating assisted layer-by-layer assembly. Then the bacterial inhibitory zones, optical density value monitoring, bacterial killing efficiency and adhesion were investigated; and all the results revealed that the AgNPs@oCNTs thin film coatings exhibited robust and long-term antibacterial activity against both Gram negative and Gram positive bacteria . Moreover, due to the shielding effects of polymer layers, the coatings showed extraordinary blood compatibility and limited toxicity against human umbilical vein endothelial cells. It is believed that the proposed large-scale fabrication of bactericidal, blood and cell compatible AgNPs@oCNT based thin film coatings will have great potential to forward novel operational pathogenic inhibition strategies to avoid undesired bacterial contaminations of biomedical implants or biological devices. Statement of Significance Bacterial infection of medical devices has been considered to be a world-wide clinical threat towards patients’ health. In this study, a bioinspired and biocompatible antibacterial coating was prepared via the spray-assisted layer-by-layer (LbL) assembly. The silver nanopartilces loaded oxidized carbon nanotube (AgNPs@oCNT), which were coated by functional polymers (chitosan and synthetic heparin mimicking polymers), were prepared via mussel inspired chemistry; and the spray-assisted assembly process allowed the fast construction on devices. Owing to the antibacterial efficiency of the loaded AgNPs, the coating showed robust bacterial killing activity and resistance towards bacterial adhesion . Moreover, since that the AgNPs were shielded by the polymers, the coating exhibited no clear toxicity at blood or cellular level. Benefiting from the universal and large-scale fabrication advancements of the spray assisted LbL coating; it is believed that the proposed strategy can be applied in designing many other kinds of self-sterilizing biomedical implants and devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2016
·Vol. 40
·期 10
·8459-8464
·
IF 3.277
Qianqian Du,Fei Qu,Beibei Mao,Shuyun Zhu,Jinmao You
An efficient sensor was developed for highly sensitive and selective determination of melamine based on Ag nanoclusters (Ag NCs) capped by hyperbranched polyethyleneimine (PEI) molecules with different molecular weights. The fluorescence of the Ag NCs could be quenched by Hg2+ and recovered by melamine. The molecular weights of PEI had an appreciable effect on the sensitivity, and Ag NCs capped by PEI with a molecular weight of 600 were more sensitive; the linear range of melamine was from 0.1 to 30 μM with a detection limit 30 nM. Moreover, this Ag NCs–Hg2+ system displayed excellent selectivity over common interferences such as metal ions, amino acids, sugars and nitrogen-containing organic molecules. Benefiting from the high selectivity, good recoveries ranging from 96% to 101% were obtained in food samples, including milk, infant formula, and dog food. More importantly, Ag NC-doped agarose hydrogels were fabricated easily to construct a visual device for the detection of melamine in food samples.
✓ 已验证
产品关联
DOI
高影响因子
Materials Research Express
·
2016
·Vol. 3
·期 7
·075024
·
IF 0.968
Shiben Liu,Yingjie Chen,Lifeng Dong
Hybrid nanostructures can be multifunctional and even possess enhanced properties. Ag–Fe2O3 nanocomposites and Ag nanoparticles (NPs) were fabricated and applied to catalyze the reduction of 4-nitrophenol. Compared with Ag NPs, Ag–Fe2O3 nanocomposites demonstrated enhanced catalytic activities. Furthermore, due to their magnetic properties, Ag–Fe2O3 nanocomposites could be easily separated from the reaction mixture and recycled through an external magnetic field. These findings will help us design hybrid nanostructures with catalytic activity and explore other potential applications of magnetic nanocomposites.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2017
·
IF 4.811
Qiufang Yao,Bitao Fan,Ye Xiong,Chao Wang,Hanwei Wang,Chunde Jin,Qingfeng Sun
A self-reporting aerogel toward stress sensitive slectricity (SSE) was presented using an interconnected 3D fibrous network of Ag nanoparticles/cellulose nanofiber aerogel (Ag/CNF), which was prepared via combined routes of silver mirror reaction and ultrasonication. Sphere-like Ag nanoparticles (AgNPs) with mean diameter of 74 nm were tightly anchored in the cellulose nanofiber through by the coherent interfaces as the conductive materials. The as-prepared Ag/CNF as a self-reporting material for SSE not only possessed quick response and sensitivity, but also be easily recovered after 100th compressive cycles without plastic deformation or degradation in compressive strength. Consequently, Ag/CNF could play a viable role in self-reporting materials as a quick electric-stress responsive sensor.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Friction
·
2024
·Vol. 12
·期 9
·1991-2003
·
IF 6.3
Ao Dong,Fan Xiaoqiang,Zhu Minhao
Efficient cooperative lubrication can be achieved via the introduction of core-shell structure lubricant additives with hard core and soft shell, for obtaining the expected anti-wear performance from the structural changes in the friction process. In this study, C@Ag microspheres with a core-shell structure were prepared by the redox method with carbon spheres as the core and Ag nanoparticles as the shell. Their tribological behaviors as base oil (G1830) additive with different concentrations were investigated in detail. Compared with base oil, the addition of C@Ag particles at 0.5 wt% can reduce the coefficient of friction (COF) and wear volume (Wv) up to 15.5% and 88%, respectively. More importantly, C@Ag particles provide superior lubrication performance to single additive (like carbon sphere (CS) and Ag nanoparticle). C@Ag core-shell particles contribute to the formation of tribo-film by melt bonding of flexible Ag and carbon sphere (CS) toward excellent self-repair performance and high-efficiency lubrication. Hence, core-shell structural nanoparticles with hard-core and soft-shell hold bright future for high-performance lubrication application.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2017
·
IF 3.887
Yangyang Zhao,Jing Zhao,Guiye Shan,Dongmei Yan,Yanwei Chen,Yichun Liu
It is important to control drug release and detect the distribution of drug molecules before and after release. In this work, liposome@AgAu nanocomposite is prepared for drug delivery, which not only can control drug release by near infrared laser irradiation but also can monitor drug molecules by surface enhanced Raman scattering (SERS) and fluorescence signal during the release process. The liposome@AgAu core/shell nanocomposite prepared by the galvanic replacement reaction (GRR) shows tunable localized surface plasmon resonance (LSPR) absorption peaks from visible to near-infrared region and good biocompatibility. Comparing to pure doxorubicin (DOX) molecules, liposome@AgAu nanocomposite loading DOX exhibit lower cytotoxicity by MTT assay. After loading into liposome@AgAu, the fluorescence signal of DOX disappear due to the fluorescence resonance energy transfer from DOX to metals shell. On the contrary, the SERS signal of DOX in liposome@AgAu is obviously increased. Furthermore, the liposome@AgAu nanocomposite shows photothermal conversion ability under resonance laser irradiation. Under 633 nm laser irradiation, the liposome@AgAu nanocomposite loading DOX can release drug molecules for killing cancer cell. Meanwhile, the fluorescence signal from DOX appears after drug release from liposome@AgAu, but the SERS signal is not obvious. Therefore, this nanocomposite can provide a platform for photothermal controllable drug release and optical signal targeting for drug molecules.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the Iranian Chemical Society
·
2024
·
IF 2.2
Fan Zhen,Li Chunxia,Xu Meijie
ZnO/Ag nanocomposite was prepared via in situ method by using silver nitrate and ZnSO 4 as the raw material. ZnO and ZnO/Ag were characterized by utilizing SEM, UV-vis, XRD, FTIR, and so on. The photocataytic degradation behaviors of ZnO and ZnO/Ag for trimethylamine (TEA) in air and solution were studied. The results indicated that ZnO/Ag had better photocatalytic degradation properties on trimethylamine under the condition of 0.06 g catalyst, 2 h photocatalytic time, and 15 A light intensity, and the degradation rates of TEA were up to 44 and 67% in air and solution, respectively. Furtherly, ZnO and ZnO/Ag also indicated perfect photocatalytic degradation properties toward to organic compounds in wastewater. Especially, the harmless treatment of triethylamine was achieved by using photocatalytic degradation method that provided a novel method for treating triethylamine. In all the above results leaded to a good application prospect of ZnO/Ag in the degradation of organic compounds in air and solution.
✓ 已验证
产品关联
DOI
高影响因子
Coatings
·
2024
·Vol. 14
·期 7
·887
·
IF 2.9
Shuilin Wang,Fanping Meng,Zhimin Cao
Implants and other medical devices are prone to bacterial infections on their surface due to bacterial attachment and biofilm formation. In this study, silver nanoparticles were generated in situ onto regulated synthesized polydopamine particles, and the optimal amount of silver nitrate was determined. Composite micro–nano particles were then deposited on a titanium alloy surface. X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy were used to confirm that the titanium alloy surface was successfully coated with PDA-Ag. Scanning electron microscopy, transmission electron microscopy, and three-dimensional optical profilometry were utilized to analysis the morphology of the micro–nano particles and the surface morphology after deposition. The diameters of the polydopamine particles and silver nanoparticles were 150 nm and 25 nm, respectively. The surface roughness values decreased from 0.357 μm to 25.253 μm because of the coated PDA-Ag. Morphology and chemical composition analyses of the modified surface indicated that the PDA-Ag particles were uniformly bonded to the substrate surface. Antimicrobial assays illustrated that the PDA-Ag-modified surface possessed resistance againstEscherichia coliandStaphylococcus aureusattachment, with an effectiveness of 96.14 and 85.78%, respectively. This work provides a new strategy and theoretical basis for tackling medical-related surface infections caused by bacterial adhesion.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2025
·
IF 3.3
Wangqiong Xu,Qiling Li,Shubiao Xia,Zhe Li,Feixiang Cheng,Shimei Guo
Surface coating is an effective approach for realizing the commercialization of cathode materials. Nowadays, ionically conducting surface coatings are commonly used to improve the electrochemical stability of LiMn2O4. In this work, LiMn2O4 cathodes decorated with in situ formed Ag nanoparticles with high electronic and ionic conductivity are prepared via a simple calcination process. The detailed microstructural mechanism of the influence of Ag on the electrochemical performance enhancement of spinel LiMn2O4 is uncovered by spherical-aberration-corrected (Cs-corrected) scanning transmission electron microscopy (STEM). The results demonstrate that the Ag coating helps to promote the transport of Li+ and strengthen the cycling stability by alleviating the decomposition of the electrolyte and manganese dissolution. Accordingly, the capacity retention rate of the optimized 5 wt% Ag/LiMn2O4 sample reached 80% after 900 cycles with an initial discharge-specific capacity of 100 mA h g−1 at 5 C (1 C = 148 mA h g−1). This work indicates that Ag coating is a promising technology for producing high-energy density lithium-ion batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Research Express
·
2024
·Vol. 11
·期 6
·065403
·
IF 1.8
Hongfeng Lin,Jianhong Chen,Zhongyan Zhang,Yuxu Wang
In the current study, Fe3O4/Ag nanohybrids demonstrating high efficiency in liver cancer ferroptosis therapy and MR imaging were synthesized using a facile one-pot approach. Subsequently, their morphology, chemical composition, structure, Fenton reaction activity, and magnetic resonance (MR) contrast effect were systemically assessed. Importantly, the in vitro studies demonstrated that the Fe3O4/Ag nanohybrids had a high therapeutic efficiency in treating liver cancer cells and performed exceptionally well during T2-weight MR imaging. Correspondingly, these Fe3O4/Ag nanohybrids demonstrate significant potential for use in the field of biomedicine.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2018
·Vol. 10
·期 1
·59
·
IF 2.935
Wenqiang Wang,Xi Chen,Chu Zhao,Bowu Zhao,Hualin Dong,Shengkui Ma,Liying Li,Li Chen,Bin Zhang
A blend of Polyvinylidene Fluoride (PVDF) and SiO2microspheres inN,N-Dimethylformamide (DMF) underwent phase inversion to form a PVDF/SiO2membrane with SiO2microspheres in the membrane’s pores. Subsequently, the SiO2microspheres have been used as platforms for in site Ag nanoparticles (NPs) synthesis, forming a composite membrane. Benefitting from the full exposure of Ag NPs to the reactants, the composite membrane shows high catalytic reactivity when catalyzing the reduction ofp-nitrophenol under a cross-flow. The catalytic reaction follows the first-order kinetics, and the reaction rate increases with an increase in the amount of Ag NPs in the membrane, the reaction temperature, and the operating pressure. What is more, highly purified products can be produced and separated from the reactants in a timely manner by using the composite membrane.Keywords:Ag nanoparticles;catalysis;composite membrane;separation;SiO2microspheres
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2017
·Vol. 29
·期 6
·4432-4440
·
IF 2.019
Shao Weifang,Li Gang,Zhu Pengli,Zhang Yu,Ouyang Qionglin,Sun Rong,Chen Chunhua,Wong Ching-Ping
Silver nanoparticles with small particle size distribution and good dispersibility were synthesized through a facile chemical reduction method. In the progress, AgNO 3 was used as the precursor, polyacrylic acid and ethanol amine were introduced as the protective agent, hydrazine hydrate was chosen as the reduce agent. Diameter of the resulted monodisperse silver nanoparticles is between 50 and 70 nm. Then, the obtained silver nanoparticles were well dispersed in the oil-based ink, which can be printed on a flexible polyimide substrate to form the conductive printed circuit board through following low temperature annealing treatment. A lowest electricity resistivity of 5.6 × 10 −8 Ω m is obtained which is only 3.5× higher than that of bulk silver.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）