文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第673至684个,产品总数744个

设置提升方向
Cd²⁺
JOURNAL OF THE ELECTROCHEMICAL SOCIETY · 2025 · IF 3.3

Rapid and Portable Detection of Pb(II) and Cd(II) Ions Using a Screen-Printed Graphene Electrode Enhanced with Alkalized MXene and Gold Nanoparticles

Huajin Tao,Nan Wang,Yitian Ma,Ahua Xu,Baoyu Huang,Xiaogan Li

This study introduces the development of a portable electrochemical sensor for the detection of Pb(II) and Cd(II) ions based on a screen-printed graphene electrode (SPGE) enhanced with alkalized MXene and gold nanoparticles (AuNPs). Experimental results reveal that the Au@Alk-MXene/SPGE electrode exhibits excellent electrical conductivity, enlarged active surface area, and efficient electron transfer capability, which enhances the electrochemical detection of Pb(II) and Cd(II) ions. Under optimal experimental conditions, the sensor demonstrates good electrochemical response and distinct stripping peaks for both ions. The linear detection range of the sensor is 5-130 μg L⁻¹ for both Pb(II) and Cd(II), with detection limits of 0.198 μg L⁻¹ for Pb(II) and 0.106 μg L⁻¹ for Cd(II). Furthermore, the sensor shows excellent repeatability with relative standard deviations (RSDs) of 1.16% (n = 10) for Pb(II) and 1.25% (n = 10) for Cd(II), as well as remarkable reproducibility with RSD values of 1.56% for Pb(II) and 1.57% for Cd(II). The sensor was successfully applied to analyze tap water and lake water samples, demonstrating satisfactory recovery rates. This research shows the use of MXenes and AuNPs to modify SPGE electrodes, offering a rapid and portable electrochemical sensor for detecting Pb(II) and Cd(II) ions in water.

CAS / MDL: 64-19-7 68-12-2 127-09-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2024 · IF 8.5

Ratiometric emission of Tb(III)-functionalized Cd-based layered MOFs for portable visual detection of trace amounts of diquat in apples, potatoes and corn

Yin-Xia Sun,Bo-Tao Ji,Jiang-Hai Chen,Lu-Lu Gao,Yu Sun,Zhe-Peng Deng,Biao Zhao,Jin-Guo Li

Diquat (DQ) is a typical bipyridine herbicide widely used to control weeds in fields and orchards. The severe toxicity of diquat poses a serious threat to the environment and human health. Metal-organic frameworks (MOFs) have received widespread attention due to their unique physical and chemical properties and applications in the detection of toxic and harmful substances. In this work, a two-dimensional (2D) Tb(III) functionalized MOF Tb(III)@ 1 ( 1  = [Cd(HTATB)(bimb)] n ·H 2 O (Cd-MOF), H 3 TATB = 4,4′,4″-triazine-2,4,6-tribenzoicacid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene) has been prepared and characterized. Tb(III)@ 1 has excellent optical properties and high water and chemical stability. After the Tb(III) is fixed by the uncoordinated -COO- in the 1 framework, Tb(III)@ 1 emits the typical green fluorescence of the lanthanide ion Tb(III) through the “antenna effect”. It is worth noting that Tb(III)@ 1 can be used as a dual emission fluorescence chemical sensor for the ratio fluorescence detection of pesticide DQ, exhibiting a relatively low detection limit of 0.06 nM and a wide detection range of 0–50 nM. After the addition of DQ, a rapid color change of Tb(III)@ 1 fluorescence from green to blue was observed due to the combined effects of IFE, FRET and dynamic quenching. Therefore, a simple test paper box has been designed for direct on-site determination of pesticide DQ. In addition, the developed sensor has been successfully applied to the detection of DQ in real samples (fruits a Yin-Xia Sun and Bo-Tao Ji contributed equally to this work and should be considered co-first authors.nd vegetables) with satisfactory results. The results indicate that the probe developed in this study has broad application prospects in both real sample detection and actual on-site testing.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2024 · IF 7.4

Removal and stabilization of As and Cd in water/soil using silicate-supported nano zero-valent iron composites: Preparation, behavior, mechanism and cost analysis

Qiwei Sun,Huifen Yang,Xiaodi Feng,Tong Zhao

A novel silicate-supported nano zero-valent iron composite material (nZVI@SS) for the removal and stabilization of arsenic (As) and cadmium (Cd) in water/soil had been developed through the modification of low-grade oolitic iron ore (OI) by reduction, while refinery sludge (RS) as reductant, manganese carbonate (MC) as additive in this work. The As and Cd adsorption capacity of nZVI@SS reached 93.91 mg·g −1 and 265.81 mg·g −1 , respectively. Its specific surface area and pore volume increased by 19.28 m 2 ·g −1 and 0.24 cm 3 ·g −1 , respectively when compared with unmodified OI. In the actual soil leaching process, using 2 % nZVI@SS for 30 days, the leaching concentrations of As and Cd decreased by 87.86 % and 85.51 % respectively, while their bioavailable contents were reduced by 15.59 mg·kg −1 and 1.40 mg·kg −1 , correspondingly. The formation of chemical precipitates as Fe-As, Ca-As compounds, and Cd(OH) 2 was the main mechanism of their adsorption process . Therefore, HMs adsorbed by nZVI@SS were difficult to desorb, making it more suitable for passivation/stabilization of HMs in groundwater/soil. Furthermore, the production cost of nZVI@SS was approximately 50 $/T, below the average market value of comparable adsorption materials. This method made low-grade minerals into environmentally friendly materials with high added value, significantly reduced the environmental risk of HMs in water/soil, and provided a new approach for the development of sustainable environmentally friendly materials using hazardous waste RS as a resource.

CAS / MDL: 7647-01-0 10048-95-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS ES&T Engineering · 2025 · IF 6.7

Phosphorus-Rich Calcium-Based Bentonite Coupled with Smooth Vetch (Vicia villosa var.) for Enhanced Improvement of Cd-Contaminated Farmland: Interaction and Synergistic Passivation Mechanism

Jianhua Qu,Hongxuan Chu,Fansong Meng,Xiaoyang Liu,Fuxuan Bi,Mengning Wang,Libo Fu,Hongli Fan,Ying Zhang

Phosphorus-rich calcium-based bentonite (BM-PCB) was synthesized via a ball milling process and synergistically integrated with smooth vein (SV) to establish a coupled remediation system for Cd-contaminated soil. The combined application of BM-PCB and SV resulted in a 61.28% reduction in bioavailable Cd content, exhibiting 2.81- and 5.13-fold enhancements compared with those of BM-PCB (21.81%) and SV (11.94%) alone, respectively, confirming the existence of a strong synergistic passivation effect. BM-PCB enhanced the Cd enrichment capacity of SV by 2.83 times by promoting root development, subsequently increasing humic acid (HA) production by 33.33% by catalyzing the condensation reactions between phenolic compounds and amino acids following SV incorporation. The interaction between HA and BM-PCB enhanced Cd adsorption by improving the interlayer spacing, pore structure, functional group content, and charge characteristics of BM-PCB. Additionally, the beneficial microorganisms recruited by the coupling of BM-PCB and SV reduced Cd bioavailability as well as facilitated the decomposition and transformation of SV residues, thereby improving soil nutrients. This approach consequently increased the maize yield by 61.31% while concurrently reducing the Cd content in grains to comply with food safety standards. Life cycle assessment confirmed that the proposed BM-PCB+SV system represented a cost-effective and low-environmental-risk “three-in-one” strategy, simultaneously achieving Cd immobilization, soil fertility enhancement, and food security assurance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2021 · IF 4.821

A reduced graphene oxide supported Au-Bi bimetallic nanoparticles as an enhanced sensing platform for simultaneous voltammetric determination of Pb (II) and Cd (II)

Wen-Juan Wang,Xin-Yang Lu,Fen-Ying Kong,Heng-Ye Li,Zhong-Xia Wang,Wei Wang

A reduced graphene oxide supported Au-Bi bimetallic nanoparticles (rGO/Au-Bi) have been synthesized and employed as a novel sensing platform for electrochemical determination of Pb 2+ and Cd 2+ simultaneously. The successful formation of rGO/Au-Bi nanocomposites was investigated by means of transmission electron microscopy and X-ray photoelectron spectroscopy. At the rGO/Au-Bi nanocomposites modified electrode, two well-resolved voltammetric peaks for Pb 2+ and Cd 2+ were observed in differential pulse anodic stripping voltammetry (DPASV) measurements. Under the optimized conditions (pH 4.5, deposition potential −1.0 V, deposition time 200 s), the DPASV response currents demonstrated good linearity with the concentration of Pb 2+ (0.1–500 μg L −1 ) and Cd 2+ (0.1–300 μg L −1 ). The detection limits was 0.05 μM for Pb 2+ and 0.02 μM for Cd 2+ , respectively. In addition, the proposed electrode exhibited outstanding resistance to potentially interferents, high stability and excellent repeatability. Satisfactory application of proposed electrode was also demonstrated by the determination of Pb 2+ and Cd 2+ in real river water samples.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SYNTHETIC METALS · 2021 · IF 3.266

Five functional Cd/Zn-based MOFs constructed from V-shaped tricarboxylate ligand for rapidly selective adsorption and efficiently photocatalytic degradation of hazardous aromatic dyes

Ruixue Wu,Caifeng Bi,Lulu Wang,Jinmiao Wang,Chuanbin Fan,Nana Li,Mei Wang,Feng Shao,Guobo Chen,Yuhua Fan

In this work, five novel Cd/Zn-based MOFs with different topological framework, namely {[Cd(bimb)(Hbipa)]·H 2 O} n (1), {[Cd 3 (dimb) 3 (bipa) 2 (H 2 O) 2 ]·2H 2 O} n (2) , [Cd(bimd)(Hbipa)(H 2 O)] n (3) , {[Zn(bipd)(Hbipa)]·H 2 O} n (4) and [Zn(bimb)(Hbipa)] n (5) had been synthesized and characterized. Worth noting, Complex 1 and 2 had effective separation behaviors towards MO and MBE dyes respectively, which could reach the adsorption equilibrium within a quite short time even if there existed another kind of dye in the system. Meanwhile, Complex 3 – 5 showed great performance in CR adsorption. Additionally, Complex 3 – 5 also showed excellent photocatalytic degradation capabilities toward MB and MV dyes under UV irradiation. According to the study, these five metal-organic frameworks can be used as a kind of functional materials in the adsorption and photocatalytic degradation of organic dyes in wastewater.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SOLAR ENERGY MATERIALS AND SOLAR CELLS · 2015 · IF 5.337

Preparation and properties of β-cyclodextrin/4,4′-diphenylmethane diisocyanate/polyethylene glycol (β-CD/MDI/PEG) crosslinking copolymers as polymeric solid–solid phase change materials

Kelin Peng,Changzhong Chen,Wanli Pan,Wenmin Liu,Zhiqiang Wang,Lanlan Zhu

Four β-cyclodextrin/4,4′-diphenylmethane diisocyanate/polyethylene glycol (β-CD/MDI/PEG) crosslinking copolymers with different crosslinking density were prepared and characterized as novel polymeric solid–solid phase change materials (SSPCMs) for thermal energy storage . In the SSPCMs, PEG acts as the phase change functional chain and β-cyclodextrin (β-CD) acts as the molecular framework. The results from wide-angle X-ray diffraction (WAXD) and polarizing optical microscopy (POM) show that the synthesized SSPCMs have good crystallization properties and spherocrystal morphology with smaller size than that of PEG. According to the results of differential scanning calorimetry (DSC) and thermogravimetry (TG) curves, the SSPCMs possess high phase change enthalpies , good reusability , thermal reliability and stability. It is concluded that the crosslinking density of SSPCMs is a crucial factor significantly influenced the free movement and crystallization of PEG segments, and then affects phase transition properties of SSPCMs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COORDINATION CHEMISTRY · 2023 · IF 1.9

Synthesis, crystal structures and DNA-binding properties of Zn(II), Cd(II), Mn(II), Cu(II) complexes based on a thiazole derivative and carboxylic acids

Xiao-Tong Song,Ying Zhou,Gui-Bao Liu,Hui-Chao Guan,Shu-Mei Yue

By single-crystal X-ray diffraction (XRD) analysis, five complexes, catena-[(µ-2,2-bis(4-carboxyphenyl)hexafluoropropane)-(2-(pyidin-2-yl)-1,3-benzothiazole)-aqua-zinc(II)] (1), catena-[(µ-2,2-bis(4-carboxyphenyl)hexafluoropropane)-(2-(pyidin-2-yl)1,3-benzothiazole)-aqua-cadmium(II)] (2), catena-[hepta(µ-2,2-bis(4carboxyphenyl)hexafluoropropane)-diaqua-bis(2-(pyidin-2-yl)-1,3-benzothiazole)-tri-manganes(II)] (3), catena-[(µ-benzene-1,2,4,5-tetracarboxylato)-(2-(pyidin-2-yl)-1,3benzothiazole)copper(II)] (4) and catena-[(µ-3-nitrobenzene-1,2-dicarboxylato)-(2-(pyidin-2-yl)1,3-benzothiazole)-aqua-zinc(II)] (5), were characterized in this research. In these five complexes, H2hfipbb = 2,2-bis(4-carboxyphenyl)hexafluoropropane, H4btec = 1,2,4,5-benzenetetracarboxylic acid, H2NPTA = 3-nitrophthalic acid and bpt = 2-(pyridin-2-yl)benzo[d]thiazole). Complexes 1 and 2 occur in the monoclinic system with space group C2/c, 4 and 5 occur in the monoclinic system with space group P21/c, and 3 occurs in the triclinic system with space group P-1. The interaction between CT-DNA (calf thymus DNA) and those complexes was examined using UV spectroscopic analysis, fluorescent spectroscopic analysis, circular dichroism spectroscopy (CD) and viscosity analysis. This research reveals that those complexes have strong ability to interact with DNA, and they all bind to DNA in an intercalation mode, thus affecting the structure of DNA. This binding mode can arise from the interaction between the benzothiazole metal complexes and DNA. Hence, we hope to provide some scientific research bases for studying benzothiazole complexes and designing new thiazole anticancer drugs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2023 · IF 7.7

High performance ratiometric detection towards trace Cd(II) and Pb(II) utilizing in-situ bismuth modified nitrogen rich porous carbon/boron doped diamond composite electrode

Xuesong Zhou,Zhigang Gai,Yibao Wang,Shousheng Liu,Xueyu Zhang,Fengxiang Guo,Mei Zhang,Lili Zhang,Xin Jiang

The high performance detection of heavy metal ions in crucial water sources is of great significance to protect human health and life safety. Herein, a novel ratiometric detection system towards trace Cd(II) and Pb(II) has been established by utilizing in-situ bismuth modified nitrogen rich porous carbon/boron doped diamond (Bi/NC/BDD) composite electrode. Benefiting from the interconnected hierarchical micro/mesoporous structure and N-embedded partially graphitized carbon matrix of NC modifier, as well as the formation of Bi-alloy, an excellent sensitivity with low limit of detection (LOD, 0.24 μg L −1 for Cd(II) and 0.37 μg L −1 for Pb(II)) is realized. Moreover, the built-in normalization function of Bi(III) reference signal effectively improves the reliability and reproducibility of detection results. This work provides an important guidance for the development of quality environmental monitoring electrodes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2023 · IF 5.2

Fabrication of Neodymium (Nd), Cadmium (Cd) and Nd:Cd doped hybrid copper oxide nanocomposites: Evaluation of their antibacterial activity and cytotoxicity against human L132 cell line

Kasi Gopinath,Sathishkumar Gnanasekar,Khalid A. Al-Ghanim,Marcello Nicoletti,Marimuthu Govindarajan,Ayyakannu Arumugam,Chinnasamy Balalakshmi,Sarinthip Thanakkasaranee

In the present study, Neodymium (Nd), Cadmium (Cd), and the various molar ratios of Nd: Cd doped copper oxide nanocomposites (CuO NCs) were prepared by the co-precipitation method. The as-synthesized Nd, Cd, and Nd:Cd doped CuO NCs [Cu 1-x + y Nd x Cd y O, (x:y = 0.006:0.00, 0.00:0.006, 0.005:0.001, 0.004:0.002, 0.003:0.003, M)] were characterized through various instrumentation techniques such as TGA , UV–Vis–NIR, FTIR, Raman, FL, XRD , ZP , FE-SEM with EDAX elemental mapping, HR-TEM and XPS analyses. Further, the antibacterial activity of doped CuO NCs was tested against Staphylococcus aureus and Escherichia coli . An equal molar ratio of Nd and Cd doped CuO NCs showed excellent antibacterial activity mainly due to the synergistic effect of sufficient Nd 3+ , Cd 2+ , and Cu 2+ ions releasing ability . Interestingly, the doping effect enhances surface defects and decreases the ability to scavenge free radicals compared to pure CuO nanomaterials . At the same time, the cytotoxicity of NCs was evaluated on the human lung epithelial L132 cell line. Evidently, 75 μg/ml concentration of Nd:Cd doped CuO NCs samples shows 80% viability, which confirms their negligible cytotoxic effect. The Nd:Cd doped CuO NCs (94:3:3) had a high aspect ratio shape, remarkable ion-releasing ability, and biocompatibility while being thermally stable. Because of these qualities, they are well suited for treating bacterial infections in the biomedical area.

CAS / MDL: 25322-68-3 1310-73-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY · 2022 ·Vol. 331 ·期 12 ·5641-5648 · IF 1.754

Electrochemical separation of uranium from dysprosium on liquid Ga and liquid Cd electrodes in molten LiCl–KCl–CsCl eutectic at recycling of high-level waste

Smolenski Valeri,Novoselova Alena,Yan Yongde,Xue Yun,Ma Fuqiu

The equilibrium potentials of Me(III)/Me (Me = Dy, U) couples and the double Me–Ga, Me–Cd alloys vs. Cl − /Cl 2 reference electrode were measured at the temperature range 673–973 K in molten LiCl–KCl–CsCl eutectic by open-circuit potentiometry. The apparent standard potential and the base thermodynamic properties of alloys were determined. Separation factor for Dy/U couple was calculated on gallium and cadmium electrodes. In addition, it was found that the application of gallium electrodes has a significant advantage over cadmium electrodes in the process of electrochemical separation of uranium and dysprosium.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2022 · IF 9.136

Construction of novel maple leaf-like MnO2–SiO2@PDA composites for highly efficient removal of Cu(II), Cd(II) and Ni(II) from aqueous solution

Zhiqiang Guo,Lei Sun,Hui Hou,Jian Zhou,Yuan Li,Liangliang Hu,Jinzhang Xu

The preparation of the maple leaf-like MnO 2 –SiO 2 @PDA biomimetic composites not only overcame the problem of easy agglomeration of nanoparticles, but also provided rich functional groups, large specific surface areas and good stability, achieving the efficient sorption of Cu(II), Cd(II) and Ni(II) from aqueous solution. The maximum sorption capacities of the MnO 2 –SiO 2 @PDA towards Cu(II), Cd(II) and Ni(II) attained from the Langmuir model were 218.788, 383.420 and 148.939 mg·g −1 , respectively. The sorption of Cu(II), Cd(II) and Ni(II) on the MnO 2 –SiO 2 @PDA were strongly affected by pH, but not by ionic strength, showing good resistance to salt interference. The main sorption mechanism of the MnO 2 –SiO 2 @PDA towards Cu(II), Cd(II) and Ni(II) was the strong surface complexation of the functional groups on the MnO 2 –SiO 2 @PDA with Cu(II), Cd(II) and Ni(II). Moreover, the radii of Cu(II), Cd(II) and Ni(II) ions and their complexation strength with the MnO 2 –SiO 2 @PDA jointly determined the order of the competitive sorption capacities as Cu(II) > Cd(II) > Ni(II). Given the above analyses, the maple leaf-like MnO 2 –SiO 2 @PDA biomimetic composites have excellent application prospects in practical wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。