CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Fengxia Wang,Xu Ding,Xiaobo Niu,Xianyi Liu,Wei Wang,Ji Zhang
Although core-shell structure is favored by many applications, preparing it with green way is rarely been reported. Herein, a core-shell structured Cu@Pd-CS nanocomposite is greenly fabricated utilizing a natural chitosan and applied to glucose detection. As-obtained Cu@Pd-CS nanoparticles were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD). When applied to glucose detection, the Cu@Pd-CS exhibits good stability, sensitivity and anti-interference. Moreover, it has a good linear relationship in glucose concentrations range of 0.1−1 mM with the sensitivity of 1.53 μA mM −1 cm −2 and 1−10 mM with the sensitivity of 23.00 μA mM −1 cm −2 . This work proves the practicability of building metal-based core-shell structure nanoparticles with green resources and glucose detection application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2020
·Vol. 8
·期 27
·9337-9344
·
IF 7.059
Aili Wang,Lili Zhao,Hui Liu,Ziqian Zhou,Chengbo Li,Yong Xiang,Weijia Zhou,Feng Hao
The development of low-dimensional non-precious metal catalysts for the hydrogen evolution reaction (HER) is highly desired for clean energy utilization. Herein, we have reported a facile synthesis protocol of Cu–Mo–O (CMO) nanowires and nanosheets on Cu foam (CMOW/CF and CMOS/CF) through a one-step reaction of Cu nanowires with (NH4)6Mo7O24 solution directly under mild conditions. The final product morphology has been tuned by mechanical stirring. The as-synthesized CMOS/CF exhibits a low operating overpotential of 112 mV at a current density of 10 mA cm−2 with a high electrochemical active area of 25.1 mF cm−2 and excellent long-term stability in the 1 M KOH electrolyte. Moreover, by using the CMOS/CF as cathodic and anodic electocatalysts, a two-electrode electrolyzer capable of driving 10 mA cm−2 at a cell voltage of 1.69 V was achieved, along with promising stability. The high performance of the CMOS/CF can be attributed to higher electrochemical area and more Mo catalytic sites induced by mechanical stirring. This work provides a facile method for the synthesis and catalytic site regulation through a simple method of low-dimensional nanomaterials for the HER with relatively high electrochemical active area and catalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2020
·
IF 5.339
Chang Ping Yang,Li He,Cheng Zhi Huang,Yuan Fang Li,Shu Jun Zhen
Due to the ultra-weak and instantaneous chemiluminescence (CL) of luminol–H 2 O 2 system, developing new catalysts to dramatically enhance and produce persistent CL emission is crucial. In this study, the Cu-metal-organic frameworks (Cu–MOFs) with flower morphology converted from Cu-based metal-organic gels (Cu–MOGs) could catalyze luminol–H 2 O 2 system, exhibiting persistent CL. The possible mechanism of this persistent emission of luminol was attributed to the gradual generation of OH˙, O 2 ˙ − and 1 O 2 in Cu–MOFs–catalyzed luminol–H 2 O 2 system. In addition, OH˙ and O 2 ˙− were continuously recombined into singlet oxygen on the surface of Cu–MOFs which further prolonged the duration time of the CL leading to the persistent emission, due to the longer lifetime of 1 O 2 compared to OH˙ and O 2 ˙ − . Furthermore, based on the high-intensity emission of Cu–MOFs–catalyzed luminol–H 2 O 2 system, the strategy for sensitive response to quercetin was established with good linearity within the range of 0.05–1.2 μM and a detection limit of 49.7 nM. This study provides a new idea for developing persistent CL catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2022
·
IF 5.723
Yue Li,Huan Ren,Daolai Sun,Xinqiang Zhao,Satoshi Sato
Liquid-phase catalytic hydrodeoxygenation of 1,2-decanediol (1,2-DDO) to form 1-decanol was performed over various non-noble metal-loaded acidic catalysts, and Cu loaded on amorphous SiO 2 -Al 2 O 3 exhibited a high catalytic activity for the formation of 1-decanol. A high 1-decanol selectivity of 84.7% with a complete 1,2-DDO conversion was obtained within only 15 min over the Cu/SiO 2 -Al 2 O 3 at 250 °C under 10 MPa H 2 pressure. The temperature at 250 °C and the H 2 pressure higher than 3 MPa were conducive to the efficient production of 1-decanol from 1,2-DDO. In contrast to the previously reported noble metal catalysts, Cu/SiO 2 -Al 2 O 3 required a relatively high reaction temperature, while an extremely high 1-decanol productivity of 78 mmol g cat −1 h −1 could be achieved. Meanwhile, the hydrodeoxygenation of 1,2-decanediol over Cu/SiO 2 -Al 2 O 3 proceeded via a reaction mechanism in which decanal was formed as the intermediate. In addition, the Cu/SiO 2 -Al 2 O 3 catalyst was reusable at least five times without serious deactivation.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 47
·期 6
·3140-3150
·
IF 3.925
Xingrui Qi,Zhidong Zhao,Nian Li,Zijian He,Yufang Chen,Tao Jin
At present, water resources contaminated by pathogenic microorganisms have an increasingly serious impact on human health. Photocatalytic sterilization using solar energy is an inexpensive and effective method. However, how to effectively utilize solar energy and improve the photocatalytic performance of catalysts is the main problem at present. In this work, urchin-like WO3−x and Cu-doped WO3−x were synthesized by a simple method. The synthesized photocatalysts were characterized in detail, and the sterilization performance of the catalysts was investigated under simulated sunlight. The sterilization rates of WO3−x against Escherichia coli and Staphylococcus aureus were 65.74% and 94.73%, respectively, while the sterilization rates of WO3−x doped with Cu against these two bacteria were 99.95% and 99.24%, respectively. Cu–WO3−x shows excellent photocatalytic bactericidal performance, which is attributed to the enhanced oxygen vacancies of WO3−x and the separation of photogenerated electron–hole pairs by the doping of Cu. This work is expected to provide an effective way to develop solar photocatalytic sterilization.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2023
·
IF 8.4
Fengwen Cui,Peilin Wang,Kun Liu,Yuchen Guo,Qiang Ma,Yuquan He
A novel confinement-induced ECL enhancement (CIECL) sensing system has been constructed based on copper clusters (Cu NCs) and nano-vesicles in this work. The CIECL strategy resolved the shortcoming of poor stability and low luminous intensity of Cu NCs. Firstly, nano-vesicles were prepared through liquid-liquid self-assembly with amyl gemini quaternary ammonium salt and anionic surfactant. Subsequently, Cu NCs were confined in the nano-vesicles by electrostatic interaction. Due to the restriction on the intramolecular vibration and rotation of the ligands of Cu NCs, the Cu NC/nano-vesicle-based CIECL system showed the significant luminescence enhancement, good stability and high biocompatibility. Additionally, the Au nanoparticles-array with significant surface plasmon resonance effect has been prepared to further amplify the ECL intensity. Finally, the CIECL-based biosensor has been successfully used to detect miRNA-145 in clinic samples in the linear range of 100 fM to 100 nM, which displayed the potential value in the vascular calcification analysis.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2023
·
IF 12.9
Zhao Sun,Shufan Yu,Sam Toan,Rufat Abiev,Maohong Fan,Zhiqiang Sun
Steam reforming of methanol is a promising approach to achieving hydrogen storage, transportation, and in situ supply. However, this technology is restricted by its high CO selectivity and catalyst deactivation. In this study, CuCr2O4-based catalytic oxygen carriers are tailored for lattice oxygen participating in low-temperature methanol reforming. We found that the low-temperature activation of methanol originated from Cu–O–Cr structure intensification and highly activated lattice oxygen induction. Specifically, methanol can be activated at temperatures as low as 160 °C, on the one hand, attributed to the reinforcement of the Cu–O–Cr structure and, on the other hand, owing to the highly reactive lattice oxygen from the CuO4 tetrahedron in the CuCr2O4 spinel. Combined with XAS and Raman results, the formation of the Cu–O–Cr structure is demonstrated. The hydrogen production rate with an applied CuCr2O4-based catalytic oxygen carrier is 53.2% higher than the control group without Cu–O–Cr formulation. Satisfactory cyclic stability is retained after the 50th lattice oxygen induction and supplement cycle, ascribing to the Cu–O–Cr structure that strongly intensifies Cu–Cr2O3 interactions. DFT results reveal that the process of CH3OH → CH3O* is the rate-determining step. Compared to Cu(111) and Cr2O3(110), the tailored Cu(111)/Cr2O3(110) surface with a Cu–O–Cr structure exhibits the lowest potential barrier during this process, promoting low-temperature methanol reforming.
✓ 已验证
产品关联
DOI
高影响因子
Matter
·
2023
·
IF 18.9
Chao Gao,Ye Feng,Suyi Liu,Dongmei Fu,Bin Chen,Dailing Du,Wenjing Zhang,Zhan Gao,Haihong Yang,Daniela A. Wilson,Yingfeng Tu,Fei Peng
Summary A Cu@MoS 2 microtube-based micromotor with a unique composite structure in which MoS 2 was “wrapped” on the surface of Cu microtubes confers excellent photoresponsive properties due to the unique hybridized structure. Micromotor swarms demonstrate spontaneous oscillatory motion in pure water with constant light input, without any external field changes or energetic toxic fuels. This macroscopic periodic oscillatory motion synchronized with the cycle of increasing and decreasing protons (H + ) produced by the micromotor. The H + gradient is the core of cellular ATP (adenosine triphosphate) synthesis and decomposition. Oscillating proton signals released by the micromotor can be coupled to cardiomyocytes to achieve synchronized oscillations of cell membrane potential/calcium ions and to initiate ATP hydrolysis in cardiomyocytes. The oscillatory behavior was considered to be caused by the different conversion levels of bistable reactions or by non-linear kinetics and mass transport. Specifically, MoS 2 photocatalytic hydrogen production, MoS 2 hydrolysis reactions, dynamic diffusive matter exchange from electroosmotic flow, and interfacial effects contribute to this phenomenon.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Xuzhao Gao,Yueyang Xu,Yan Yin,Ning Gu,Yongping Zeng
The adsorption desulfurization technology presents remarkable advantages and is a promising method because of its affordability, gentle operating conditions. Metal-organic frameworks (MOFs) have garnered significant attention owing to their remarkable features, including large specific surface areas, pore volume and the designable structure. The hierarchical porous CuBTC-DMA was successfully synthesized by adding salicylic acid and using the hydrothermal method. Subsequently, Ni ions were introduced into the structure using ion-exchange method. It was found that the doping of salicylic acid and Ni ions did not significant alter the structure of the material. The new type of π-complexed adsorbent, Ni@HP-CuBTC-DMA, was prepared. The results of adsorption desulfurization experiments showed that Ni@HP-CuBTC-DMA-1.5(0.2 M) had the highest adsorption capacity, with the maximum adsorption amounts of 25.63 mg S/g and 41.06 mg S/g for thiophene and benzothiophene , respectively. In the toluene competition experiment, the adsorption amount of thiophene could still reach 19.25 mg S/g. The results of regeneration experiments demonstrate that Ni@HP-CuBTC-DMA-1.5(0.2 M) still has excellent adsorption capacity after four cycles.
✓ 已验证
产品关联
DOI
高影响因子
SOLID STATE SCIENCES
·
2023
·
IF 3.5
Tao Li,Chen Wu,Na Pan,Qianying Hua,Aokui Sun
Molybdenum-copper composites have attracted increasing attention due to their excellent properties in terms of electrical conductivity , thermal conductivity and mechanical property, which are closely related to the density and composition of the sintered material. However, high temperatures are required to obtain high sintering density, resulting in loss of copper in most cases. In this work, a novel core-shell Mo–Cu composite powder was prepared by a ball-milling method followed by hydrogen reduction. The phase compositions and microstructure of prepared powders were studied by XRD , TEM and EDS , and the formation process of core-shell structure of Mo–Cu powders was discussed in detail. It was shown that the significant difference in reduction temperatures between molybdenum and copper oxides contributes to the formation of core-shell structure.
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2023
·Vol. 8
·期 32
·e202302517
·
IF 2.1
Kaiwen Ma,Fangya Li,Xinbin Li,Ting Liu,Ting Wang,Huanlei Wang,Shuai Liu
Graphical In this study, a lithiophilic 3D Cu 3 Sn active sites modified commercial Cu foil as current collector is designed by electroplating and heat process, which could induce a uniform nucleation of Li metal. The obtained Li@Cu 3 Sn anode shows superior interface property and efficient Li metal deposition/stripping process. The development of lithium metal battery is severely restricted by its uncontrolled dendrite growth and volume change. In this work, we designed a controllable lithiophilic Cu 3 Sn modified commercial Cu foil as current collector via simple industrial electroplating and heat treatment. As a Li-reservoir substrate for efficient deposition/stripping of Li metal, the introduction of Cu 3 Sn not only increases multiple active sites for the deposition of Li, but also provides more transfer paths for lithium ions. The Li metal anodes prepared by molten Li on the Cu current collector with dispersed Cu 3 Sn active sites provide a uniform lithiophilic surface, which could effectively promote a uniform Li deposition/stripping and suppress the formation of lithium dendrites. As a result, the assembled symmetric battery is stable at a low over-point position for 1600 h without short circuit at 1 mA cm −2 with 1 mAh cm −2 , the full battery paired with LiFePO 4 still maintains a high-capacity retention rate of 97.1 % and a coulombic efficiency (CE) of 99.5 % after 400 cycles at a current density of 2 C. This work provides a facile and controllable strategy for the design of current collectors with high lithium affinity for stable lithium metal anode applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
·
2023
·
IF 3.4
Xiaolan Yang,Jitao Li,Qiulan Li,Dezhi Yang,Yaling Yang
The amorphous Cu-containing phosphomolybdate (Cu-PTs) composite with high peroxidase (POD)-like activity at neutral conditions was explored as biosensors for raloxifene (RAF) detection. The strong attraction between negatively charged Cu-PTs and positively charged substrates 3,3′,5,5′-tetramethylbenzidine (TMB), as well as the acceleration of the conversion of active Cu + /Cu 2+ by the Cu/W bimetallic redox couples were demonstrated to play significant roles in POD-like activity in physiological environment. When RAF is presence, it can bind to the surface of Cu-PTs and changes the chemical signal on the material surface, leading to the decreased POD-like activity. Based on this, a colorimetric method was established for the sensitive assay of RAF with a lower limit of detection (LOD) of 0.025 mg/L and good recovery from 90.13% to 108.9%. This work paves a new way to design a POD-like colorimetric protocol for tracing RAF in pharmaceutical products and environmental samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）