JOURNAL OF MEDICINAL CHEMISTRY
·
2019
·
IF 6.054
Lan-Lan Lou,Fu-Qiang Ni,Lin Chen,Sharpkate Shaker,Wei Li,Rong Wang,Gui-Hua Tang,Sheng Yin
A germacrane sesquiterpenoid library containing 30 compounds (2–31) was constructed by structural modification of a major component aristolactone (1) from the traditional Chinese medicine Aristolochia yunnanensis. Compound 11 was identified as a promising anticardiac fibrosis agent by systematic screening of this library. 11 could inhibit the expression of fibronectin (FN), α-smooth muscle actin (α-SMA), and collagens in transforming growth factor β 1 (TGFβ1)-stimulated cardiac fibroblasts at a micromolar level and ameliorate myocardial fibrosis and heart function in abdominal aortic constriction (AAC) rats at 5 mg/kg dose. Mechanistic study revealed that 11 inhibited the TGFβ/small mother against decapentaplegic (Smad) signaling pathway by targeting TGFβ type I receptor (IC50 = 14.9 ± 1.6 nM). The structure–activity relationships (SARs) study indicated that the unsaturated γ-lactone ring and oxidation of C-1 were important to the activity. These findings may provide a new type of structural motif for future anticardiac fibrosis drug development.
✓ 已验证
DOI
PubMed
高影响因子
Nanoscale Advances
·
2023
·
IF 4.7
Yizhou Zhang,Yiru Wang,Zhengyi Zhang,Zhe Wang,Changyu Shao,Matthias Hannig,Zihuai Zhou,Baiping Fu
Calcium carbonate (CaCO3), possessing excellent biocompatibility, bioactivity, osteoconductivity and superior biodegradability, may serve as an alternative to hydroxyapatite (HAp), the natural inorganic component of bone and dentin. Intrafibrillar mineralization of collagen with CaCO3 was achieved through the polymer-induced liquid precursor (PILP) process for at least 2 days. This study aims to propose a novel pathway for rapid intrafibrillar mineralization with CaCO3 by sequential application of the carbonate-bicarbonate buffer and polyaspartic acid (pAsp)-Ca suspension. Fourier transform infrared (FTIR) spectroscopy, zeta potential measurements, atomic force microscopy/Kelvin probe force microscopy (AFM/KPFM), and three-dimensional stochastic optical reconstruction microscopy (3D STORM) demonstrated that the carbonate-bicarbonate buffer significantly decreased the surface potential of collagen and that CO32-/HCO3- ions could attach to collagen fibrils via hydrogen bond. The electropositive pAsp-Ca complexes and free Ca2+ ions are attracted to and interact with CO32-/HCO3- ions through electrostatic attractions to form amorphous calcium carbonate that crystallizes gradually. Moreover, like CaCO3, strontium carbonate (SrCO3) can deposit inside the collagen fibrils through this pathway. The CaCO3-mineralized collagen gels exhibited better biocompatibility and cell proliferation ability than SrCO3. This study provides a feasible strategy for rapid collagen mineralization with CaCO3 and SrCO3, as well as elucidating the tissue engineering of CaCO3-based biomineralized materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry B
·
2023
·Vol. 11
·期 44
·10632-10639
·
IF 7
Lijia Yao,Bingquan Chen,Hailong Wu,Yuanjing Cui,Guodong Qian
Combination therapies are an increasingly important part of the antitumor medicine armamentarium. However, developing desirable nanomaterials for combination therapies is still a great challenge. Herein, a biocompatible Cu(I)-doped metal–organic framework (MOF) (denoted as CuZn-ZIF) is designed as a novel dual-functional nanocarrier. Doxorubicin molecules are covalently bound to the surface of the CuZn-ZIF and released by the cleavage of chemical bonds in an acidic environment, demonstrating the capacity of controlled drug release. More importantly, CuZn-ZIF nanocarriers can simultaneously play the role of nanocatalysts, capable of catalyzing H2O2 into a highly reactive intracellular toxic hydroxyl radical (˙OH). An in vivo study reveals that nanoparticles exhibit high antitumor efficacy through the combined performance of DOX and Cu(I), proving the great potential of this copper(I)-based MOF for combined chemo-chemotherapy to improve therapeutic efficacy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Jian Zhang,Ning Pu,Menglin Li,Wenhao Sang,Qing He,Qianqiu Tian,Wen Zhang
Interest in functional silver has rapidly grown over the years due to significant advances in separation, sensing, catalysis, and biomedical applications. Here we developed a new strategy to load single atomic silver species in the rigid and open unit of the fully conjugated benzimidazole-linked polymers (BILPs). Due to the well-defined chelating units of N-heterocycles, the Ag + ion species can be coordinated by N ligands and stabilized in the atomic level without aggregating into nanoscale Ag clusters and nanoparticles. The obtained Ag + -BILP-101 exhibits a selective binding property of Ag + ions from solutions. The ultrastable structure and the property of taking up metal species, endow BILPs with the advantages of functionalizing metal species. After the reduction by NaBH 4 , the Ag + ions were transferred into Ag nanoparticles. The substantial and intrinsic porosity of BILPs also gives excellent accessibility to Ag species loaded in the frameworks. The plentiful N-heterocycles and loaded Ag species show a synergistic/coadsorption effect for iodine vapor, and the charge transfer from frameworks promotes the formation of iodide ions. The iodine capture capacities of Ag + -BILP-101 and Ag 0 -BILP-101 reach 3.3 g/g and 3.7 g/g at 80 ℃, and still maintain 3.2 g/g and 3.5 g/g at 150 ℃, respectively. After ethanol elution, the residual iodine/Ag molar ratios in Ag + /Ag 0 -BILP-101 samples are still more than one (about 1.5), suggesting their strong affinity toward iodine. This work highlights the excellent selective Ag + ion binding and Ag species supporting properties of BILPs, which can extend to other porous organic framework platforms for various applications based on silver species-skeleton interactions.
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2021
·
IF 9.811
Jinglong Huang,Binbin Su,Enhai Song,Maxim S. Molokeev,Zhiguo Xia
Low-dimensional hybrid metal halides demonstrate broad-band emission and high photoluminescence quantum yield (PLQY) acting as excellent candidates for a new generation of luminescent materials in lighting fields. However, most luminescent metal halides can only be excited by ultraviolet radiation, and the discovery of high-efficient emitters with broad-band excitation characteristics, especially upon efficient blue light irradiation, is a challenge. Herein, a zero-dimensional (0D) Cu(I)-based organometallic halide (18-crown-6)2Na2(H2O)3Cu4I6 (CNCI) was prepared with a green emission band centered at 536 nm and a near-unity PLQY (91.8%) upon excitation of 450 nm. Importantly, the ultrabroad excitation band covering a 300–500 nm range was observed in CNCI, and the luminescence mechanism has been discussed in detail. A white light-emitting diode (WLED) was fabricated with high luminous efficiency of 156 lm/W and a high color rendering index of 89.6. This work provides guidance for designing high-performance luminescent metal halides with suitable excitation characteristics and also promotes the application prospects of such materials in WLED fields.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Jiafu Li,Jiahui He,Md. Tareq Aziz,Xiaocui Song,Ying Zhang,Zhiguang Niu
As a well known endocrine-disrupting and model chemical, bisphenol A (BPA) may pose a serious threat to human health, since it and its disinfection by-products (DBPs) have been detected in drinking water , urine, human colostrum, adipose tissue , and placenta samples. Although chlorinated BPAs (Cl-BPAs) and iodinated BPAs (I-BPAs) have been well studied, brominated BPAs (Br-BPAs), and mixed halogenated DBPs like bromo-iodo-BPAs (Br-I-BPAs), and bromo-chloro-iodo-BPAs (Cl-Br-I-BPAs) are less well understood. Notably, the role of iodide (I - ) during chlorination is not well understood, since the studies of the I-DBPs mainly focus on their genotoxicity and cytotoxicity. To understand the formation mechanisms of halogenated bisphenol A (HBPs) during chlorination with bromide (Br - ) and/or I - , and the role of I - during chlorination, three set of reactions were performed in the laboratory (“BPA + chlorine + Br - ”, “BPA + chlorine + I - ” and “BPA + chlorine + Br - +I - ” assigned as group A, B and C respectively). Thirty HBPs were identified and 18 of them were never reported before. I - increases the transformation rate of BPA into HBPs as I-BPAs act as intermediate HBPs during chlorination that easily react with HClO/ClO - and HBrO/BrO - to form Cl-BPAs and Br-BPAs. HIO/IO - showed higher reactivity towards BPA and HBPs than that of HBrO/BrO - and HClO/ClO - . The recycling of I - was observed in the reactions of “BPA + chlorine + I - ” and “BPA + chlorine + Br - +I - ”, which may explain why I - can induce BPA to transform into HBPs and suggests that I - may act as a catalyst during the BPA chlorination reactions. The reaction pathways are proposed which present the reactions of BPA and HBPs with HClO/ClO - , HBrO/BrO - , and HIO/IO - , as well as the recycling of I - . This study describes the potential DBP formation and transformation mechanisms of BPA and its 16 alternatives, as well as the role of I - on the transformation of phenol compounds during chlorination.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ChemCatChem
·
2021
·Vol. 13
·期 20
·4325-4333
·
IF 5.686
Hongwei Deng,Chenyan Guo,Penghui Shi,Guohua Zhao
Graphical Electroreduction of CO 2 : The amino group is modified on the copper electrode with the cuprous oxide deposition layer by electrodeposition, and then the CO 2 is electrocatalytically reduced to ethylene on the surface, which promotes the efficient recycling of carbon resources in the ecosystem. Amino assisted protonation for carbon-carbon coupling during electroreduction of carbon dioxide to ethylene on copper(I) oxide reported by Penghui Shi, Guohua Zhao and co-workers from Shanghai University of Electric Power and Tongji University. The development of effective catalysts for the electrocatalytic carbon dioxide reduction reaction (CO 2 RR) to two-carbon (C 2 ) products is a practical approach to solve the energy crisis and stabilize the carbon cycle of the ecosystem. The production of electrocatalytic CO 2 RR with copper metal shows low selectivity and mainly generates one-carbon (C 1 ) products, hindering its wide practical application. The use of copper (I) oxide (Cu 2 O) in electrocatalysis has attracted intense research attention because it can more efficiently produce C 2 products with high energy density such as ethylene (C 2 H 4 ) and ethane (C 2 H 6 ). We use an amino-modified Cu 2 O catalyst (NH 2 −Cu 2 O) for electrocatalytic CO 2 RR to obtain significantly increased production of the CO and C 2 products. Electrochemical in-situ infrared spectroscopy analysis was used to detect the presence of the *COOH and *CHO reaction intermediates. Density functional theory calculations showed that the amino (−NH 2 ) modification reduces the free energy of the *CO→*CHO reaction that is the rate-determining step in C 2 H 4 production. Our results show that amino modification can promote the protonation of *CO and *CHO carbon-carbon coupling to produce C 2 H 4 . Thus, amino-modified copper-based catalysts are promising materials for application in electrocatalytic CO 2 RR to multi-carbon products.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2020
·
IF 6.785
Dexin Du,Jiangnan Shu,Mingquan Guo,Mohammad A. Haghighatbin,Di Yang,Zhiping Bian,Hua Cui
Recently, nanoluminophores with the potential-resolved multicolor electrochemiluminescence (PRMCECL) property have emerged and shown promising applications in sensitive, selective, and accurate bioassays, bioimaging, and multicolor emitting devices. However, only limited PRMCECL nanoluminophores and their applications in ratiometric biosensors eliminating proportional errors have been reported. Herein, a novel PRMCECL nanoluminophore was synthesized by encapsulating CdS quantum dots (CdSQDs) into MOF-5 (CdSQDs@MOF-5). Using K2S2O8 as a coreactant, two electrochemiluminescence (ECL) peaks, ECL-1 centered at 685 nm and ECL-2 centered at 475 nm, were observed at −1.4 and −1.8 V, respectively. Related ECL mechanisms have been proposed. Based on the potential-resolved ECL signals, a label-free differential ECL immunosensor for the determination of cardiac troponin I (cTnI) was established by assembly of poly(diallyldimethylammonium chloride), CdSQDs@MOF-5, and cTnI antibody-functionalized silver nanoparticles on the surface of the fluorine-doped tin oxide electrode subsequently. In the presence of cTnI, cTnI was captured by the sensing interface, leading to an increase in ECL-1 and ECL-2 intensity. cTnI could be determined in the range of 0.01–1000 pg/mL with a detection limit of 5.01 fg/mL using the intensity difference between ECL-1 and ECL-2. This work provides a new family member of PRMCECL nanoluminophores. The proposed label-free differential ECL immunosensor provides a new strategy based on potential-resolved ECL signals, which could effectively eliminate the additive error and show better sensitivity, selectivity, and accuracy for the detection of cTnI than the single-signal strategy and ratiometric strategy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RARE METALS
·
2020
·Vol. 40
·期 7
·1987-1994
·
IF 2.161
Wang Ya-Ting,Liu Men,Tang Nian,Li Sheng-Jian,Sun Yan,Wang Shi-Xiong,Yang Xiang-Jun
Abstract Solvent extraction based on ionic liquids is generally considered to be an environmentally benign and effective technology for gold(I) recovery. The aim of this work is to study gold(I) extraction from aurocyanide solution using fluorine-free ionic liquids [A336][SCN], [A336][MTBA] and [A336][Mal]. Various factors that affect gold(I) extraction (including concentration of ionic liquids, equilibrium pH, concentration of the modifier tributyl phosphate (TBP), reaction time and initial concentration of gold in an aqueous solution) were studied and optimized. The results indicate that the three Aliquat 336-based ionic liquids all exhibit excellent behaviors for gold(I) extraction. More than 99.8% of gold(I) can be extracted from the aqueous phase into the ionic liquid phase. The gold-loaded ionic liquids were characterized using infrared spectroscopy and mass spectrometry to study the extraction mechanism of gold(I). The results revealed that extraction of gold(I) into the ionic liquid phase was based on an exchange reaction between the anion Au(CN)
− 2
in aqueous solution and the anion SCN − in ionic liquid [A336][SCN]. The logarithmic relationship between distribution coefficient and TBP concentration indicates that two TBP molecules are involved in the formation of the extracted complex. The extracted complex was determined to be A336 + ·Au(CN)
− 2
·2TBP. In addition, the gold(I)-loaded ionic liquids can be efficiently stripped using NH 4 SCN, 2-methylthiobenzoic acid and methyl maltol. The results establish that Aliquat 336-based ionic liquids have potential application prospects in gold(I) recovery from cyanide solutions.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Chemistry and Pharmacy
·
2020
·
IF 3.294
Liang Zhang,Yichen Zhao,Chaoqun Mu,Xiaomin Zhang
A magnetic adsorbent was prepared by polydopamine coating and thiourea grafting on carbon-modified discarded fly ash magnetic beads (TPCMFA). The successfully preparation of the TPCMFA was supported by SEM image, XRD, FT-IR and Raman spectroscopy . Batch adsorption experiments reveal that the adsorption of silver ions on this magnetic sorbent TPCMFA agreed with the Langmuir isotherm model, with a maximum absorbability of 94.94 mg g -1 . Kinetics data revealed that the adsorption of silver ions on TPCMFA conform to a pseudo-second-order. The TPCMFA achieved remarkable selectivity for Ag (I) that was almost five times higher than that for ions of copper, zinc and nickel. After three cycles, the adsorption capacity of TPCMFA remained at 93.5% of the adsorption capacity of the initial material. These results show that this new magnetic adsorbent prepared from discarded fly ash magnetic beads has promising commercial prospects.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2019
·
IF 3.131
Shixue He,Chao Yang,Mingguang Niu,Dandi Wei,Shasha Chu,Mei Zhong,Jide Wang,Xintai Su,Lu Wang
Well-defined deposition of noble metal nanoparticles is attractive for the synthesis of heterogeneous metal catalysts with excellent activity, stability, and easy separability. Herein, a facile method combining surface coordination deposition with thermal decomposition has been proposed to fabricate Ag/CoFe 2 O 4 composites as magnetic catalysts for hydrogenation reduction of 4-nitrophenol and 2-nitroaniline. This method involved the adsorption of silver ions on cobalt-ferrous oxalate through the surface coordination, and then the thermal decomposition into Ag/CoFe 2 O 4 . The characterizations of XRD , SEM, FTIR, BET, VSM , XPS and Element mapping were utilized to reveal that Ag/CoFe 2 O 4 exhibited a magnetic saturation of 40.4 emu g −1 , a specific surface area of 58.8 m 2 g -1 , and an even distribution of metallic Ag on CoFe 2 O 4 particles. Catalytic reduction tests of 4-nitrophenol and 2-nitroaniline indicated that the Ag contents in Ag/CoFe 2 O 4 seriously affected the catalytic activity of the catalysts. Moreover, the durability test showed that Ag/CoFe 2 O 4 still preserved ∼74.6% of the initial catalytic activity even at the 20th run.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2019
·
IF 6.35
Shanshan Wang,Chuanping Li,Muhammad Saqib,Guohua Qi,Chunhua Ge,Haijuan Li,Yongdong Jin
Signal amplification for electrochemiluminescence (ECL) plays a significant role in ultrasensitive detection of disease biomarkers. We report herein a new signal amplification strategy–quasi-photonic crystal nanomembrane-based light scattering enhancement for ECL signal amplification, via fabricating a novel close-packed monolayered SiO2-nanomembrane as solid-state ECL electrodes. In the system, the quasi-photonic crystal structure of the monolayered SiO2-nanomembrane led to intense light scattering within the nanofilm, which significantly increases the photon flux and then definitely improves the excitation number of the luminescent molecules (Ru(bpy)32+). Reinforced by the nanostructured electrode surface of the nanomembrane, the as-prepared ECL electrode exhibited significant ECL enhancement, ∼77-fold enhancement in the classic Ru(bpy)32+-TPrA system. We further constructed a sandwich-type SiO2-nanomembrane based solid-state ECL immunobiosensor for ultrasensitive detection of cardiac troponin I (cTnI). Under optimal conditions, the immunobiosensor exhibited a very low limit of detection (LOD) of 5.6 fg mL–1 for cTnI. Due to the cheap and easy availability of the materials, this study and findings not only provide an efficient way to improve the ECL intensity but also benefit the design of novel ECL electrodes for various biomarker detections.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）