JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Chengyu Mo,Yutao Yang,Zhenyu Wang,Yanpeng Lv,Rongzheng Tian,Zixiang Zhao,Hongzhou Zhang,Chunliang Li,Lianqi Zhang,Yongan Yang,Dawei Song
Sulfide solid electrolytes have attracted wide attention due to their high ionic conductivity . Li 6 PS 5 Cl is one of the most promising electrolytes for all-solid-state lithium batteries with high-energy-density. It is reported that the disordered arrangement of Cl - in the aragonite structure has a significant effect on the conductivity of Li 6 PS 5 Cl. In this work, the disorder of anion sites is modestly regulated by adjusting the ratio of S and Cl in Li 6−x PS 5−x Cl 1+x electrolyte. In addition, to verify the commonality of this strategy, Li 5.6 PS 4.6 Cl 1.4 is prepared using self-made Li 2 S, and similar results are obtained. On this basis, the density of Li 5.6 PS 4.6 Cl 1.4 electrolyte sheet is improved by hot-pressing, which can successfully inhibit the growth of lithium dendrites . As expected, the ionic conductivity of the sulfide electrolyte and the electrochemical performance of the ASSLBs are greatly improved. A highest ionic conductivity of 8.2 × 10 −3 S cm −1 of Li 5.6 PS 4.6 Cl 1.4 is obtained at room temperature. A high capacity retention of 99.99 % is maintained for NCM811 @Li 2 O//Li 5.6 PS 4.6 Cl 1.4 //Li-In system after 400 cycles at 1 C with ultra-high cathode loading of 35.6 mg cm −2 . Besides, the cost of sulfide electrolytes can be reduced as the decreased usage of Li 2 S. This work proposes a novel synthesis method of low-cost and high-performance Li 6−x PS 5−x Cl 1+x electrolytes.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
Laser & Photonics Reviews
·
2023
·Vol. 17
·期 12
·2300476
·
IF 11
Wenhai Sun,Xiang Zhang,Hulin Zhang,Zichen Ren,Mingjun Chen,Yingjun Xiao,Zitong Li,Jianbo Deng,Dukang Yan,Leipeng Zhang,Yao Li
The development of electrochromic devices (ECDs) that can dynamically modulate infrared (IR) emissivity while maintaining a wide color gamut distribution for visible (VIS)-IR compatible spectral manipulation has been a long-standing challenge. Current ECDs are limited by simultaneous changes in IR emissivity and VIS colors when subjected to external potential, restricting their potential applications. This work presents, for the first time, VIS–IR compatible ECDs capable of displaying VIS multicolor and dynamically modulating IR emissivity via a Ge/HfO 2 Fabry–Perot cavity structure. The all-solid-state VIS-IR compatible ECD with the structure of ITO/NiO/Ta 2 O 5 /Li/WO 3 /ITO/Ge/HfO 2 achieves not only emissivity modulation of 0.20 at potentials of −2.5 V and +2.5 V in the wavelength range of 2.5–25 µm, but also, due to the presence of Fabry–Perot cavity, the novelty compatible device structure achieves static multicolor modulation, thus decoupling VIS and IR emissivity modulation. Additionally, a flexible VIS-IR compatible ECD based on polyaniline is also constructed. This novel approach offers a promising possibility for multispectral compatible manipulation, VIS multicolor, and IR signal processing applications.
研究领域:
材料科学
·
光学工程
·
纳米光子学
·
功能材料
·
智能器件
·
表面物理
·
能源材料
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Yang Bai,Yanbiao Zhao,Weidong Li,Linghui Meng,Yongping Bai,Guorong Chen
The developing sulfide solid electrolyte is a promising way to overcome shuttle effect of polysulfide in the traditional liquid Li-S battery. However, an air stable sulfide solid electrolyte and competitive solid–solid interface structure must be constructed firstly. Herein, we have designed an organic–inorganic multi-scale composite electrolytes to overcome the interfacial issues of solid state Li-S batteries (SSLSBs). The organic–inorganic composite electrolyte consists of a gel polymer electrolyte (GPE) and an oxygen doped inorganic sulfide solid electrolyte. The O doped sulfide solid electrolyte improves its chemical stability and suppresses the lithium dendrites. A thin GPE film protects the crystal structural stability during cycles and greatly enhances the performance of O doped sulfide solid electrolyte due to the GPE not only constructs soft interface contact between S cathode and solid electrolyte, but also builds lithium ion transport paths by ionic liquid between them. Those SSLSBs display a very good cycling performance with the specific capacity of 1023 mAh/g after 50 cycles at 60 °C and 541 mAh/g after 150 cycles at 30 °C under same rate of 0.1 C. This study demonstrates that the development of advanced solid-state Li-S battery needs to fully integrate a number of technical advantages.
研究领域:
电化学
·
材料科学
·
固态电池
·
能源存储
·
界面化学
·
纳米材料
·
电极材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2017
·
IF 6.395
Hanyu Huo,Ning Zhao,Jiyang Sun,Fuming Du,Yiqiu Li,Xiangxin Guo
Paramount attention has been paid on solid polymer electrolytes due to their potential in enhancement of energy density as well as improvement of safety. Herein, the composite electrolytes consisting of Li-salt-free polyethylene oxides and 200 nm-sized Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 particles interfacially wetted by [BMIM]TF 2 N of 1.8 μL cm −2 have been prepared. Such wetted ionic liquid remains the solid state of membrane electrolytes and decreases the interface impedance between the electrodes and the electrolytes. There is no release of the liquid phase from the PEO matrix when the pressure of 5.0 × 10 4 Pa being applied for 24 h. The interfacially wetted membrane electrolytes show the conductivity of 2.2 × 10 −4 S cm −1 at 20 °C, which is one order of magnitude greater than that of the membranes without the wetted ionic liquids. The conduction mechanism is related to a large number of lithium ions releasing from Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 particles and the improved conductive paths along the ion-liquid-wetted interfaces between the polymer matrix and ceramic grains. When the membranes being used in the solid-state LiFePO 4 /Li and LiFe 0.15 Mn 0.85 PO 4 /Li cells at 25 °C, the excellent rate capability and superior cycle stability has been shown. The results provide a new prospect for solid polymer electrolytes used for room-temperature solid-state lithium batteries .
研究领域:
材料科学
·
电化学
·
能源材料
·
固态电池
·
高分子电解质
·
离子传导机制
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Ying Jiang,Kai Chen,Jinping He,Yuxue Sun,Xiaorong Zhang,Xiaoxing Yang,Haiming Xie,Jun Liu
Composite solid electrolytes (CSEs), which combine the advantages of solid polymer electrolytes and inorganic solid electrolytes, are considered to be promising electrolytes for all-solid-state lithium metal batteries. However, the current CSEs suffer from defects such as poor inorganic/organic interface compatibility, lithium dendrite growth, and easy damage of electrolyte membrane, which hinder the practical application of CSEs. Herein, a CSE (PBHL@LLZTO@DDB) with polyurethane (PBHL) as the polymer matrix and Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) modified by silane coupling agent (DDB) as inorganic fillers (LLZTO@DDB) has been prepared. Disulfide bond exchange reactions between PBHL and LLZTO@DDB enable PBHL@LLZTO@DDB to form a dynamic three-dimensional (3D) inorganic/organic hybrid network, which promotes the uniform dispersion of LLZTO in PBHL@LLZTO@DDB, improves the Li + conductivity (1.24 ± 0.08 × 10 −4 S cm −1 at 30 ℃), and broadens the electrochemical stability window (5.16 V vs. Li + /Li). Moreover, a combination of hydrogen bonds and disulfide bonds endows PBHL@LLZTO@DDB with excellent self-healing properties. As such, both all-solid-state symmetric and full cells exhibit excellent cycle performance at ambient temperature. More importantly, the healed PBHL@LLZTO@DDB can almost completely restore its original electrochemical properties, indicating its application potential in flexible electronic products.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
固态离子学
✓ 已验证
DOI
高影响因子
IONICS
·
2020
·Vol. 26
·期 9
·4239-4246
·
IF 2.394
Zhang Yi,Feng Wei,Zhen Yichao,Zhao Peiyao,Wang Xiaohui,Li Longtu
Li 7 La 3 Zr 2 O 12 (LLZO) with cubic phase structure is a kind of lithium-ion-conducting nanoparticles. According to the previous studies, incorporation of c-LLZO can improve electrochemical properties of PEO-based composite polymer electrolytes (CPEs). Therefore, in our study, we synthesized a kind of room-temperature-stable cubic phase LLZAO (Li 6.25 La 3 Zr 2 Al 0.25 O 12 ) nanofibers, and we aimed to confirm the optimal content of LLZAO nanofibers in PEO-based CPEs. With the incorporating 10 wt% LLZAO nanofibers, ionic conductivity of CPEs are 9.87×10 −5 S cm −1 at 30 °C and 8.66×10 −4 S cm −1 at 60 °C. The Li/CPE incorporating 10 wt% LLZAO nanofibers/Li symmetric cell exhibits little voltage fluctuation in 1000 cycles under a current density of 0.5 mA cm −2 , demonstrating better cycling stability with long cycle life. The LiFePO 4 /CPE incorporating 10 wt% LLZAO nanofibers/Li cell has a high initial discharge-specific capacity of 155.6 mAh g −1 under 0.1 C rate at 60 °C and remains 94.5% of capacity after 100 cycles. This cell also has great cycling performance under 0.2 C and 0.5 C rate, indicating good rate performance. Our work indicates that incorporation of LLZAO nanofibers enhances electrochemical properties and cycling stability of PEO-based all-solid-state lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
高分子材料
·
纳米材料
·
电化学能量转换
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2013
·
IF 4.675
Ying Yang,Pengfei Yi,Conghua Zhou,Jiarui Cui,Xiaolu Zheng,Si Xiao,Xueyi Guo,Wenyong Wang
In this work we investigate novel, agarose-based polymer electrolyte that is modified by magnetic NiO nanoparticles for solid-state dye-sensitized solar cells (DSSCs) applications. After proper treatment under an external magnetic field , the agarose electrolyte exhibits increased ionic conductivity and better penetration into the mesoporous TiO 2 photoanode film, which improves the power conversion efficiency of the DSSCs. Electrochemical impedance spectroscopy measurement is also performed to analyze the magnetic field effect on cell performance. After applying proper magnetic filed intensity, the recombination resistance and redox transport resistance in the devices are improved. This method can be possibly applied to other solid-state electrolyte materials to improve their performance and can lead to more efficient DSSCs.
研究领域:
材料科学
·
能源化学
·
纳米科技
·
光电功能材料
·
可再生能源
·
电化学
✓ 已验证
DOI
高影响因子
Energy Technology
·
2019
·Vol. 7
·期 4
·1800981
·
IF 3.163
Bangwei Deng,Hao Wang,Xiang Li,Yan Ding,Daming Sun,Jun Ma,Mianzhong Chen,Tao Chen,Feng Gao,Meizhen Qu,Gongchang Peng
Tris(trimethylsilyl)phosphite (TMSPi) has been reported to be an excellent electrolyte additive. However, scarce reports exist on the effect of the charge cutoff potential on the cyclic stability using high-performance LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)–mesocarbon microbead (MCMB) full cells. Herein, a high-loading and repeatable NCM622–MCMB coin-type full cell is successfully prepared, and the role of TMSPi on such a full cell at charge cutoff potentials of 4.25 and 4.45 V is studied. Theoretical calculations and detailed analyses reveal that it is oxidized in the first charging process due to its unsaturated P—O bonds, thus forming a stable P—O—F-rich cathode electrolyte interphase and preventing severe decomposition of the electrolyte over NCM622 during long-term cycling. In addition, the P—O and Si—O bonds of TMSPi both display HF-scavenging ability. Moreover, TMSPi may react directly with the LiPF 6 -based electrolyte to form some intermediate products that can be reduced on the MCMB electrode, thereby modifying the solid electrolyte interphase and improving the stability of MCMB during lithium intercalation.
研究领域:
电化学
·
材料科学
·
能源存储
·
锂离子电池
·
界面化学
·
电极材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）