JOURNAL OF POWER SOURCES
·
2024
·
IF 8.1
Yufen Yan,Yayu Guo,Huadong Zheng,Liang Qi,Yutao Yang,Yanli Miao,Xixi Shi,Lianqi Zhang,Chunliang Li,Dawei Song
Development of sulfide solid-state electrolytes (SSEs) with high ionic conductivity plays a leading role in achieving all-solid-state sodium batteries (ASSSBs). As an important raw material for synthesizing sulfide SSEs, the purity of Na 2 S significantly affects the ionic conductivity and electrochemical properties of sulfide SSEs. In order to obtain high-purity and low-cost Na 2 S, a hydrogen reduction of industrial grade Na 2 SO 4 followed by ethanol purification has been successfully employed to synthesize and purify Na 2 S, which possesses a high purity of 98 %. Na 3 SbS 4 has been synthesized by as-synthesized Na 2 S (A-Na 2 S) and commercial Na 2 S (C–Na 2 S) by liquid-phase synthesis and solid-state reaction methods, respectively. The electrochemical properties indicate that Na 3 SbS 4 samples synthesized by A-Na 2 S possess higher ionic conductivity and lower Ea, and the assembled ASSSBs exhibit higher specific capacities, superior cycle and rate performance. At 0.5C, the assembled TiS 2 /Na 3 SbS 4 /NaSn ASSSB exhibits a high initial capacity of 211.4 mAh g −1 with capacity retention of 96.2 % after 360 cycles at room temperature. This work provides a simple approach for synthesizing high-purity Na 2 S at low cost, enabling the large-scale application of sulfide SSEs for ASSSBs.
研究领域:
材料科学
·
电化学
·
固态离子学
·
能源存储
·
无机合成
·
电池技术
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2014
·Vol. 39
·期 28
·16123-16131
·
IF 2.93
Yufei Wang,Shuanjin Wang,Min Xiao,Shuqin Song,Dongmei Han,Michael A. Hickner,Yuezhong Meng
Novel sulfonated poly (fluorenyl ether ketone) with pendant quaternary ammonium groups (SPFEKA) was successfully synthesized by one-pot copolymerization of bis(4-fluoro-3-sulfophenyl)sulfone disodium salt, 4,4′-difluorobenzophenone, bisphenol fluorene and 2,2′-dimethylaminemethylene-9,9′-bis(4-hydroxyphenyl) fluorene (DABPF). The chemical structures were confirmed by FT-IR, and 1 H NMR. The thermal properties were fully investigated by TGA . The synthesized copolymers SPFEKAs are soluble in aprotic solvents, and can be cast into membranes on a glass plate from their N,N′-dimethylacetamide (DMAc) solution. A new kind of amphoteric ion exchange membrane (AIEM) was obtained by immersed SPFEKA into 1 M sulfuric acid. The proton conductivities of these membranes are comparable to the most reported sulfonated polymers under the same conditions. The permeability of vanadium ions in vanadium redox flow battery (VRB) was effectively suppressed by introducing quaternary ammonium groups for Donnan exclusion effect . AIEM-20% possess a only 4.4% vanadium ion permeability of Nafion 115. Cell performance tests showed that the VRB assembled with AIEM-20% shows the highest coulombic efficiency (CE) at the current density of 50 mA/cm 2 , because of its lowest VO 2+ permeability. In conclusion, these ionomers could be promising candidates for ion-exchange membranes for VRB applications.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
膜科学
✓ 已验证
DOI
高影响因子
IONICS
·
2020
·Vol. 26
·期 9
·4239-4246
·
IF 2.394
Zhang Yi,Feng Wei,Zhen Yichao,Zhao Peiyao,Wang Xiaohui,Li Longtu
Li 7 La 3 Zr 2 O 12 (LLZO) with cubic phase structure is a kind of lithium-ion-conducting nanoparticles. According to the previous studies, incorporation of c-LLZO can improve electrochemical properties of PEO-based composite polymer electrolytes (CPEs). Therefore, in our study, we synthesized a kind of room-temperature-stable cubic phase LLZAO (Li 6.25 La 3 Zr 2 Al 0.25 O 12 ) nanofibers, and we aimed to confirm the optimal content of LLZAO nanofibers in PEO-based CPEs. With the incorporating 10 wt% LLZAO nanofibers, ionic conductivity of CPEs are 9.87×10 −5 S cm −1 at 30 °C and 8.66×10 −4 S cm −1 at 60 °C. The Li/CPE incorporating 10 wt% LLZAO nanofibers/Li symmetric cell exhibits little voltage fluctuation in 1000 cycles under a current density of 0.5 mA cm −2 , demonstrating better cycling stability with long cycle life. The LiFePO 4 /CPE incorporating 10 wt% LLZAO nanofibers/Li cell has a high initial discharge-specific capacity of 155.6 mAh g −1 under 0.1 C rate at 60 °C and remains 94.5% of capacity after 100 cycles. This cell also has great cycling performance under 0.2 C and 0.5 C rate, indicating good rate performance. Our work indicates that incorporation of LLZAO nanofibers enhances electrochemical properties and cycling stability of PEO-based all-solid-state lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
高分子材料
·
纳米材料
·
电化学能量转换
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2013
·
IF 4.675
Ying Yang,Pengfei Yi,Conghua Zhou,Jiarui Cui,Xiaolu Zheng,Si Xiao,Xueyi Guo,Wenyong Wang
In this work we investigate novel, agarose-based polymer electrolyte that is modified by magnetic NiO nanoparticles for solid-state dye-sensitized solar cells (DSSCs) applications. After proper treatment under an external magnetic field , the agarose electrolyte exhibits increased ionic conductivity and better penetration into the mesoporous TiO 2 photoanode film, which improves the power conversion efficiency of the DSSCs. Electrochemical impedance spectroscopy measurement is also performed to analyze the magnetic field effect on cell performance. After applying proper magnetic filed intensity, the recombination resistance and redox transport resistance in the devices are improved. This method can be possibly applied to other solid-state electrolyte materials to improve their performance and can lead to more efficient DSSCs.
研究领域:
材料科学
·
能源化学
·
纳米科技
·
光电功能材料
·
可再生能源
·
电化学
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 39
·2302691
·
IF 13.3
Jing Yu,Guodong Zhou,Yueqing Li,Yuhao Wang,Dengjie Chen,Francesco Ciucci
Composite polymer-ceramic electrolytes have shown considerable potential for high-energy-density Li-metal batteries as they combine the benefits of both polymers and ceramics. However, low ionic conductivity and poor contact with electrodes limit their practical usage. In this study, a highly conductive and stable composite electrolyte with a high ceramic loading is developed for high-energy-density Li-metal batteries. The electrolyte, produced through in situ polymerization and composed of a polymer called poly-1,3-dioxolane in a poly(vinylidene fluoride)/ceramic matrix, exhibits excellent room-temperature ionic conductivity of 1.2 mS cm −1 and high stability with Li metal over 1500 h. When tested in a Li|electrolyte|LiFePO 4 battery, the electrolyte delivers excellent cycling performance and rate capability at room temperature, with a discharge capacity of 137 mAh g −1 over 500 cycles at 1 C. Furthermore, the electrolyte not only exhibits a high Li + transference number of 0.76 but also significantly lowers contact resistance (from 157.8 to 2.1 Ω) relative to electrodes. When used in a battery with a high-voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode, a discharge capacity of 140 mAh g −1 is achieved. These results show the potential of composite polymer-ceramic electrolytes in room-temperature solid-state Li-metal batteries and provide a strategy for designing highly conductive polymer-in-ceramic electrolytes with electrode-compatible interfaces.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
高分子化学
·
无机非金属材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Junbin Liao,Jiajie Zhu,Shanshan Yang,Nengxiu Pan,Xinyan Yu,Chao Wang,Jun Li,Jiangnan Shen
Developing highly ion conductive and desirable electrodialysis (ED) performance anion exchange membranes (AEMs) is of great significance. In this work, we report a strategy for fabricating novel AEMs based on a series of fluoro-methyl poly(arylene ether ketone)s having long-side-chain imidazolium groups for ED. Having hydrophilic conductive flexible side-chain imidazolium groups and rigid hydrophobic backbone within AEM matrix, the optimized AEM (PAEK-60-im) shows low water uptake of 24.9% at 80 °C and desirable ion conductivity of 22.01 mS cm –1 at 30 °C. In NaCl removal application of ED, PAEK-60-im shows the NaCl removal ratio of 69.66% within 120 min, outperforming commercial AEM-Type II (68.98%). Accordingly, it has a higher current efficiency of 83.7% but lower energy consumption of 5.9 kWh kg –1 , compared with the commercial one (82.0%; 6.6 kWh kg –1 ). In particular, in selectrodialysis application, possibly owing to the synergistic effect of pore-size sieving effect resulting from macro-separation morphology and hydration energy difference of SO 4 2– ions (–1000 kJ mol –1 ) and Cl – ions (–317 kJ mol –1 ) in feeding solution, PAEK-60-im shows significantly superior monovalent anion perm-selectivity (Cl − /SO 4 2− ) of 7.70 at 30 min, relative to commercial anion-selective Neosepta ACS (5.27) and many other reported mono-valent anion selective AEMs having elegant surface modified layers. The superior ED performance of the homogeneous PAEK-60-im is suggestive of its potential separation application.
研究领域:
材料科学
·
化学工程
·
电化学
·
膜技术
✓ 已验证
产品关联
DOI
高影响因子
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
·
2025
·Vol. 35
·期 7
·2341-2353
·
IF 4.7
Han-zhou LIU,Yan-chen LIU,Sheng-hao JING,Ya-qi HU,Zong-liang ZHANG,Si-liang LIU,Yang LIU,Zhi ZHUANG,Fan-qun LI,Fang-yang LIU
A dual-halide solid electrolyte, Li 3 YCl 3 Br 3 , was synthesized using a wet-chemistry route instead of the conventional mechanical ball-milling route. Li 3 YCl 3 B r3 exhibits an ion conductivity of 2.08 mS/cm and an electro- chemical stability window of 3.8 V. Additionally, an all-solid-state lithium-ion battery using Li 3 YCl 3 Br 3 and LiNi 0.83 Co 0.11 Mn 0.06 O 2 (NCM811) as the cathode material achieves a capacity retention of 93% after 200 cycles at 0.3 C and maintains a specific capacity of 115 mA·h/g during 2 C cycling. This exceptional performance is attributed to the high oxidative stability of Li 3 YCl 3 Br 3 and the in-situ formation of Y 2 O 3 inert protective layer on the NCM811 surface under high voltage. Consequently, the study demonstrates the feasibility of a simple, cost-effective wet-chemistry route for synthesizing multi-component halides, highlighting its potential for large-scale production of halide solid electrolytes for practical applications.
研究领域:
材料科学
·
电化学
·
固态离子学
·
能源存储
·
电池技术
·
无机非金属材料
·
纳米材料应用
✓ 已验证
DOI
高影响因子
Small
·
2024
·Vol. 20
·期 31
·2310912
·
IF 13
Xunzhi Miao,Jianhe Hong,Shuo Huang,Liye Ding,Fang Wang,Min Liu,Quanquan Zhang,Hongyun Jin
All-solid-state lithium batteries (ASSLBs) are highly promising as next-generation energy storage devices owing to their potential for great safety and high energy density. This work demonstrates that composite solid polymer electrolyte with vertically-aligned card-house structure can simultaneously improve the high rate and long-term cycling performance of ASSLBs. The vertical alignment of laponite nanosheets creates fast and uniform Li + ion transport channels at the nanosheets/polymer interphase, resulting in high ionic conductivity of 8.9 × 10 −4 S cm −1 and Li + transference number of 0.32 at 60 °C, as well as uniformly distributed solid electrolyte interphase. Such electrolyte is characterized by high mechanical strength, low flammability, excellent structural stability and stable ion transport channels. In addition, the ASSLB cell with the electrolyte and LiFePO 4 cathode delivers a high discharge specific capacity of 124.8 mAh g −1 , which accounts for 85.6% of its initial capacity after 500 cycles at 1C. The reasonable design through structural control strategy by interconnecting the vertically-aligned nanosheets open a way to fabricate high performance composite solid polymer electrolytes.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子科学
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2018
·
IF 5.091
Nan Lu,Xi Zhang,Ruiqi Na,Wendi Ma,Chongyang Zhang,Yuchao Luo,Yongfeng Mu,Shuling Zhang,Guibin Wang
The synthesis of a nanocomposite gel polymer electrolytes (NGPEs) using Li + -functionalized SPEEK (SPEEK(Li)) nanofiber membrane as a matrix, cross-linked PVA as a gelled agent and LiClO 4 as an electrolytic salt for electric double layer capacitors (EDLCs) were reported in this work. Compared with conventional PVA based gel electrolyte, the “SO 3 − Li + ” functional groups and the pores structure of the SPEEK(Li) nanofiber membrane improves the ionic conductivity as well as mechanical stability , which made the prepared NGPEs exhibited a high ionic conductivity of 8.9 × 10 −3 S cm −1 at ambient temperature and a large voltage stability window range from 0 to 2.0 V. The fabricated symmetric EDLCs showed a specific capacitance of 146.96 F g −1 at a current density of 0.5 A g −1 , with a maximum energy density of 18.26 W h kg −1 . Meanwhile, the EDLCs showed outstanding cyclical stability of 98% specific capacitance retention after 3000 cycles GCD testing, all of these results indicated that the NGPEs should be appropriate to EDLCs and next-generation energy storage systems .
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米技术
·
固体电解质
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）