JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Jianling Huang,ChengWei Liao,Hui Wang,YuJun Zhao,Liuzhang Ouyang,Jiangwen Liu,Min Zhu
Mg-based alloy anodes suffer from severe corrosion in conventional electrolytes (KOH solution) and this substantially obstructs the cycle life, which is a great challenge for using them in the Ni-MH battery. Herein, a high concentration tetramethylammonium hydroxide (TMAH) aqueous electrolyte with a special hydrate structure is explored and enables excellent cycle stability and high capacity for Mg-based alloy anodes. In this electrolyte, the Mg 0.4 Ti 0.1 Ni 0.5 alloy anode delivers a maximum discharge capacity of 466 mAh g −1 , and maintains 210 mAh g −1 after 100 cycles owing to the reduced corrosion rate , which are much better than that in 6 M KOH electrolyte, being 425 mAh g −1 and 69 mAh g −1 , respectively. Furthermore, by in-situ forming Cu coating on the Mg 0.4 Ti 0.1 Ni 0.5 electrode surface during charging process with the adding 0.01 M of Cu(OH) 2 in TMAH electrolyte, the corrosion of the electrode is further suppressed and the reversible capacity can reach 313 mAh g −1 after 100 cycles. The high conducting Cu coating can also increase the rate capability of the electrode by promoting the charge transfer. Thus, using TMAH electrolytes provides a new approach to promote the electrochemical performances of Ni-MH batteries with Mg-based alloy anodes.
研究领域:
材料科学
·
电化学
·
能源存储
·
金属腐蚀与防护
·
功能材料
·
电池技术
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 24
·2207362
·
IF 13.3
Yaqiang Ji,Yuan Zhang,Jiaqi Zhu,Pai Geng,Jonathan E. Halpert,Liang Guo
Flexible pressure sensors play an indispensable role in flexible electronics. Microstructures on flexible electrodes have been proven to be effective in improving the sensitivity of pressure sensors. However, it remains a challenge to develop such microstructured flexible electrodes in a convenient way. Inspired by splashed particles from laser processing, herein, a method for customizing microstructured flexible electrodes by femtosecond laser-activated metal deposition is proposed. It takes advantage of the catalyzing particles scattered during femtosecond laser ablation and is particularly suitable for moldless, maskless, and low-cost fabrication of microstructured metal layers on polydimethylsiloxane (PDMS). Robust bonding at the PDMS/Cu interface is evidenced by the scotch tape test and the duration test over 10 000 bending cycles. Benefiting from the firm interface, the developed flexible capacitive pressure sensor with microstructured electrodes presents several conspicuous features, including a sensitivity (0.22 kPa −1 ) 73 times higher than the one using flat Cu electrodes, ultralow detection limit (<1 Pa), rapid response/recovery time (4.2/5.3 ms), and excellent stability. Moreover, the proposed method, inheriting the merits of laser direct writing, is capable of fabricating a pressure sensor array in a maskless manner for spatial pressure mapping.
研究领域:
生物医学工程
·
柔性电子学
·
微纳加工
·
传感器技术
·
材料科学
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Yiran Zhang,Bang Xiao,Lin Yang,Anqi Jiao,Ke Li,Chunping Wu,Reggie Zhan,Zhen Huang,He Lin
YSZ-based mixed-potential sensors with double-sensing electrodes were fabricated for ammonia (NH 3 ) detection. ZnO and LaCoO 3 nanoparticles prepared by flame spray pyrolysis (FSP) method were used as the sensing materials. The sensing responses of ZnO and LaCoO 3 sensing electrodes can be overlapped based on the double-sensing-electrode structure, thereby significantly enhancing the sensitivity compared with the traditional mixed-potential sensors using Pt reference electrode. The sensitivities of this sensor reached up to -102.85, -75.312, -70.165, -48.616 mV/decade to 10–50 ppm NH 3 at 450, 475, 500, 525 ℃ , respectively. Moreover, the NO 2 interference effects on NH 3 detection of ZnO and LaCoO 3 electrodes were opposite and can be counteracted based on the double-sensing-electrode structure, eliminating most of the cross-sensitivity to NO 2 . The double-sensing-electrode sensor exhibited good performance under CO, CH 4 , NO, NO 2 interference, oxygen fluctuation, and humidity variations, and showed good long-term stability. The results of sensing performance exhibited the sensors with double-sensing electrodes have a great potential for application on SCR system of diesel engines. In further studies, each sensing electrode can be optimized respectively and the sensitivity and selectivity of NH 3 sensors could be enhanced to a higher level.
研究领域:
传感器学
·
材料科学
·
环境监测
·
能源工程
·
气体传感
·
纳米材料
·
催化化学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2016
·Vol. 4
·期 25
·9816-9821
·
IF 8.262
Li Cheng,Qing Chang,Yu Chang,Nannan Zhang,Changyuan Tao,Zhaona Wang,Xing Fan
Hierarchical forest-like photoelectrodes were prepared by assembling nano-ZnO on an array of micro-metal dendrites, aiming to demonstrate the idea of highly efficient photon-harvesting inside a biomimetic dendrite structure. Via a facile aqueous electrochemical deposition process, the metal dendrites were deposited on both flat and wire substrates with different alignments, showing wide adaptability. A strong, broadband anti-reflection effect was observed, owing to the diffuse reflection inside the microdendrites. By increasing the dendrite height, the overall reflectivity of the metal electrode can be reduced from 75% to 45%, which could be further reduced to 12% after combining with acicular-leaf-like ZnO nanoarrays. Its applications in light-driven water splitting were successfully demonstrated. Taking advantage of the forest-like photoelectrode, we have artificially constructed an efficient photo-electrochemical system similar to plants in a forest, with photons harvested by the crown-like photoanodes in the sunshine, and synthetic reactions driven by the root-like electrode in the shadow.
研究领域:
材料科学
·
纳米科技
·
光电化学
·
可再生能源
·
仿生学
✓ 已验证
DOI
高影响因子
Energy Technology
·
2021
·Vol. 10
·期 2
·2100350
·
IF 3.631
Liyue Xiao,Shuangrui Yao,Jie Liu,Hanjun Zou,Yanqin Xu,Yuan Cao,Changguo Chen
The nickel-based metallic organic framework (Ni-MOF) [Ni 2 (OH) 2 (C 8 H 4 O 4 )] material with a hierarchical microblocks structure is efficiently synthesized in 2 h by the ultrasonic method. At the moment Ni-MOF is used as the electrode materials and the supercapacitors (SCs) perform very well with great electrochemical capacity which exhibited particular electric capacitance of 631 C g −1 at a current density of 1 A g −1 . This is one of the highest performances and the shortest synthesis time reported so far for MOFs. Besides, there is a battery – SC hybrid SC assembled by using Ni-MOF and activated carbon. On the condition of having a power density of 302.2 W kg −1 with the voltage window of 1.2 V, the SC produces an energy density of 28.5 W h kg −1 . During the same period, the SC maintains outstanding cycling stability capacitance retention of 85.5% after 3000 cycles at current density of 10 A g −1 . The great electrochemical capability is due to the distinct crystal texture and particular morphological feature. Herein, it is displayed that the ultrasonic method is a fast and effective approach for preparing Ni-MOF SC electrode materials.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
APPLIED CLAY SCIENCE
·
2020
·
IF 4.605
Hongyuan Zhao,Huina Ma,Xiaoguang Li,Binbin Liu,Runqiang Liu,Sridhar Komarneni
We report a simple and highly efficient preparation of nanocomposite of halloysite (Hal) nanotubes/multi-walled carbon nanotubes (Hal-MWCNTs) and its electrochemical sensor application for the determination of methyl parathion (MP). The phase structure and surface morphology of the Hal-MWCNTs nanocomposite were confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) spectra. According to the electrochemical tests, the fabricated glassy carbon electrode (GCE) sensor with Hal and multi-walled carbon nanotubes showed excellent MP determination performance because of the synergistic effect of Hal and multi-walled carbon nanotubes . The Hal-MWCNTs/GCE sensor exhibited a relatively low detection limit of 0.034 μM in the linear range of 0.5–11 μM. When used for the determination of MP in real samples, the Hal-MWCNTs/GCE sensor showed good detection effect with satisfactory relative standard deviation (RSD) of 2.46 to 3.08% and recoveries of 98.8 of 101.8%. This work indicated that the nanocomposite of Hal-MWCNTs when coated on GCE is useful for the fabrication of high-performance MP electrochemical sensor.
研究领域:
分析化学
·
环境监测
·
纳米材料科学
·
电化学
·
食品安全
·
毒理学
✓ 已验证
DOI
高影响因子
Small Methods
·
2024
·Vol. 8
·期 7
·2301233
·
IF 10.7
Xiaolin Ye,Ningxin Xiong,Shaopei Huang,Qixing Wu,Hongning Chen,Xuelong Zhou
Tin-based hybrid flow batteries have demonstrated dendrite-free morphology and superior performance in terms of cycle life and energy density. However, the quick accumulation of electrodeposits near the electrode/membrane interface blocks the ion transport pathway during the charging of the battery, resulting to a very limited areal capacity (especially at high current density) that significantly hinders its deployment in long-duration storage applications. Herein, a conductivity-activity dual-gradient design is disclosed by electrically passivating the carbon felt near the membrane/electrode interface and chemically activating the carbon felt near the electrode/current collector interface. In consequence, the tin metals are preferentially plated at the region near electrode/current collector, preventing the ion transport pathway from being easily blocked. The resultant gradient electrode demonstrated an unprecedentedly high areal capacity of 268 mAh cm −2 at a current density of as high as 80 mA cm −2 . Numerical modeling and experimental characterizations show that the dual-gradient electrode differs from conventional electrodes with regard to their reaction current density distribution and electrodeposit distribution during charging. This work demonstrates a new design strategy of 3D electrodes for hybrid flow batteries to induce a desirable distribution of electrodeposits and achieve a high areal capacity at commercially relevant current densities.
研究领域:
电化学储能
·
材料科学
·
能源化学
·
电池技术
·
功能材料
·
电化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
S.Z. Zhang,X.L. Wang,X.H. Xia,Z.J. Yao,Y.J. Xu,D.H. Wang,D. Xie,J.B. Wu,C.D. Gu,J.P. Tu
Interfacial issues have been the main obstacle to the development of solid-state batteries . In this work, we design a solid hybrid polymer electrolyte based on poly-(ethylene glycol) diacrylate and succinonitrile (PSSE) with a liquid state precursor. An intimate interface between PSSE and Li 4 Ti 5 O 12 @vertical graphene (LTO@VG) electrode with three-dimensional array structure is cleverly constructed by infiltrating fluid precursor of PSSE into vertical pores of LTO@VG followed by polymerization and solidification of PSSE. The quasi-solid-state LTO@VG//PSSE//Li and LiFePO 4 //PSSE//LTO@VG full cells exhibit superior electrochemical performance since the active materials are closely contacted by the conductive skeleton and ion-conductive electrolyte. The LTO@VG//PSSE//Li cells maintain 85.7% capacity retention after 400 cycles at 2 C and the LFP//PSSE//LTO@VG full cells still reach 99.0% capacity retention after 200 cycles at 0.5 C. This novel strategy for interface engineering paves the way for achieving high-performance solid-state batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米材料
·
界面科学
✓ 已验证
DOI
高影响因子
Materials Today Physics
·
2022
·
IF 11.021
An Hua,Zifeng Mai,Binyu Wu,Zichong Ji,Min Fu,Yougen Hu,Siya Huang
Flexible and stretchable electrodes as the cornerstone of bioelectronics are bridging human with biomedical devices in an unprecedentedly intimate and safer way. However, maintaining high electrical properties while adapting to moist, complex and dynamic biosurfaces for a prolonged period of usage remains a great challenge. Herein, we demonstrate an omnidirectionally stretchable transparent electrode based on serpentine Au nanotrough (AuNT) networks with highly tunable optoelectronic performances (sheet resistance of down to ∼13 Ω sq −1 at transmittance of 90%). Owing to the junction-free nanoweb structure with an ultralow percolation density, the AuNT networks demonstrate excellent thermal stability as an efficient Joule heater with a wide operating temperature range up to 390 °C. The in-plane buckled AuNT electrode exhibits controllable heat generation upon repetitive tensile strains of 60%, enabling wearable thermotherapy at highly strained joints . Such highly stretchable electrodes can be directly laminated on the balloon catheter as expandable, high-density nanomesh ablators, showing excellent thermal and moisture stability during 15 days of storage under conditions of relative humidity of 85% at 70 °C and over 1000 heating cycles to 60 °C, offering strong potential for biomedical therapeutics , such as thermal ablation and electrochemotherapy.
研究领域:
生物医学工程
·
柔性电子学
·
转化医学
·
生物传感器
·
组织工程
·
纳米医学
·
穿戴式医疗设备
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2015
·Vol. 27
·期 4
·3549-3556
·
IF 1.569
Wang Lu,Yang Zhouyong,Ni Xiuyuan
We prepare the mesoporous polythiophene–WO 3 film through in situ polymerization which is initiated by WO 3 , and fabricate the electrochromic device with the composite film. The influences of the electrolyte ions, film morphologies and counter electrode on the electrochromism of the devices are explored by UV–Vis transmittance spectra and cyclic voltammetry tests. With the aim to enhance the contrast optical transmittance, we develop the binary composite electrolytes of LiClO 4 and N(C 4 H 9 ) 4 ClO 4 solution which can promote intercalation/deintercalation process. Besides that, we use polyethylene oxide as pore-forming agent on the polythiophene–WO 3 films, so that it will be easier for electrolyte ions to diffuse in the porous film. A NiO layer also has a complementary effect on the cathodic coloration films and increases the contrast optical transmittance remarkably. Equipped with the binary electrolyte and the NiO layer as the counter electrode, the film device exhibits high performance with the contrast optical transmittance (ΔT) of 62 % and the coloration efficiency of 212.6 cm 2 /C.
研究领域:
材料科学
·
电化学
·
功能材料
·
纳米材料
·
能源材料
·
表面科学
✓ 已验证
DOI
高影响因子
CELLULOSE
·
2018
·Vol. 25
·期 10
·5807-5819
·
IF 3.809
Sun Zhuangzhi,Du Shanqi,Li Fei,Yang Lu,Zhang Dan,Song Wenlong
A nanocomposite soft actuator based on porous high-conductivity electrode membrane, which was composed of biopolymer cellulose mixed with chitosan and highly conductive nanoparticles generated by reduced graphene oxide encapsulated multi-walled carbon nanotube, was developed in this paper. No new substance was discovered in the regenerated electrode layer through the scanning analysis from FT-IR and XRD. Actuators exhibited significant enhancement in peak to peak displacement, which was 3.64 times increased than the traditional value at 5 V 0.1 Hz. With the test of solid-state electric double layer capacitor, actuators showed the highest specific capacitance (10.695 F g −1 ) at the current density of 1 A g −1 , the lowest internal resistance (9.2 Ω g −1 ) in the frequency range of 10 5 –10 −2 Hz, and the lowest energy density (901 Wh kg −1 ) at the current density of 10 A g −1 , which demonstrated the absolute advantages in the conductivity and channels for electrons. These findings suggest that research on porous high-conductivity electrode layer holds great promise in the further study of higher performance actuators.
研究领域:
生物材料学
·
纳米医学
·
组织工程
·
柔性电子学
·
生物力学
·
智能驱动系统
✓ 已验证
DOI
高影响因子
POLYMER BULLETIN
·
2016
·Vol. 74
·期 1
·75-90
·
IF 1.371
Chen Xiuqiong,Yan Huiqiong,Shi Zaifeng,Feng Yuhong,Li Jiacheng,Lin Qiang,Wang Xianghui,Sun Wei
A novel biosensor based on electro-co-deposition of myoglobin (Mb), sodium alginate (SA), Fe 3 O 4 -graphene (Fe 3 O 4 -GR) composite on the carbon ionic liquid electrode (CILE) was fabricated using Nafion as the film forming material to improve the stability of protein immobilized on the electrode surface, and the modified electrode was abbreviated as Nafion/Mb-SA-Fe 3 O 4 -GR/CILE. FT-IR and UV–vis absorption spectra suggested that Mb could retain its native structure after being immobilized in the SA-Fe 3 O 4 -GR composite film. The electrochemical behavior of the modified electrode was studied by cyclic voltammetry, and a pair of symmetric redox peaks appeared in the cyclic voltammograms, indicating that direct electron transfer of Mb was realized on the modified electrode, which was ascribed to the good electrocatalytic capability of Fe 3 O 4 -GR composite, the good biocompatibility of SA and the synergistic effects of SA and Fe 3 O 4 -GR composite. The electrochemical parameters of the electron transfer number ( n ), the charge transfer coefficient ( α ) and the electron transfer rate constant ( k
s ) were calculated as 0.982, 0.357 and 0.234 s −1 , respectively. The modified electrode exhibited good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) with wide linear range from 1.4 to 119.4 mmol/L, low detection limit as 0.174 mmol/L (3 σ ), good stability and reproducibility.
研究领域:
生物传感器
·
电化学
·
蛋白质电化学
·
纳米材料
·
生物相容性材料
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）