JOURNAL OF POROUS MATERIALS
·
2016
·Vol. 24
·期 3
·591-599
·
IF 1.385
Li Yanyan,Na Wei,Wang Hua,Gao Wengui
A series of Au–CuO/SBA-15 catalysts with 1–3 wt% Au and 30 wt% CuO were successfully prepared for CO 2 hydrogenation to methanol by chemical reduction and the following impregnation. The influence of Au content on the physicochemical properties of Au–CuO/SBA-15 catalysts was investigated in terms of ICP-AES, N 2 physisorption, XRD, TEM, N 2 O titration, XPS and H 2 –TPR technique. The results showed that the as-prepared Au–CuO/SBA-15 catalysts exhibited higher catalytic activity than CuO/SBA-15 catalyst. 2 % Au–CuO/SBA-15 catalyst showed the best catalytic activity with 13.5 % methanol selectivity and 24.2 % CO 2 conversion for CO 2 hydrogenation to methanol. The addition of Au NPs played an important role in improving the catalytic activity for CO 2 hydrogenation to methanol, which may be attributed to the interaction between Au and CuO.
研究领域:
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2015
·Vol. 39
·期 8
·5898-5901
·
IF 3.086
Xiao Lian,Bing Yan
Both metal organic frameworks (IRMOF-3) and SBA-15 have been used to assemble novel photofunctional multi-component lanthanide hybrid materials (Ln-SBA-15-Si-IRMOF-3, Ln = Eu, Tb, Nd, and Yb), whose luminescent color can be tuned by adjusting the composition.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Yixing Luo,Qifeng Yang,Wendan Nie,Qilu Yao,Zhujun Zhang,Zhang-Hui Lu
Hydrogen (H2), a regenerable and promising energy carrier, acts as an essential role in the construction of a sustainable energy system. Formic acid (HCOOH, FA), a natural biological metabolic products and also accessible through carbon dioxide (CO2) reduction, has a great potential to serve as a prospective H2 supplier for the fuel cell. Herein, ultrafine and electron-rich IrPdAu alloy nanoparticles with a size of 1.4 nm are highly dispersed on amine-modified mesoporous SiO2 (NH2-SBA-15) and used as a highly active and selective catalyst for fast H2 production from FA. The as-synthesized IrPdAu/NH2-SBA-15 possesses superior catalytic activity and 100% H2 selectivity with initial turnover frequency values of 6316 h–1 with the additive of sodium formate (SF) and 4737 h–1 even without SF at 298 K, comparable to the most effective heterogeneous catalysts ever published. The excellent performance of IrPdAu/NH2-SBA-15 was not only ascribed to the combination of the electronic synergistic effect of trimetallic alloys and the strong metal–support interaction effect but also attributed to the amine (−NH2) alkaline groups grafted on SBA-15, which is beneficial to boost the split of the O–H bond of FA.
研究领域:
材料科学
·
催化化学
·
能源化学
✓ 已验证
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2017
·
IF 3.33
Junyi Liu,Hua Huang,Xianxiang Liu,Jiafu Xiao,Sheng Zhong,Xichun She,Zaihui Fu,Steven Robert Kirk,Dulin Yin
A series of Fe 2 O 3 doped SBA-15 materials were prepared via an equivalent-volume impregnation method. The resultant Fe 2 O 3 -containing SBA-15 materials showed good performance in phenol methylation . Under the same conditions, the mesoporous catalyst with 5 wt.% Fe 2 O 3 showed the superior catalytic activity to that of pristine α -Fe 2 O 3 even at lower reaction temperature (320 °C vs. 350 °C). The elevated catalytic activity observed for the mesoporous catalyst could be due to high level dispersion of Fe 2 O 3 species in the mesoporous framework. Furthermore, the mesoporous catalyst possessed long lifetimes, which could be used continuously for 2000 h without significant loss of activity.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2013
·Vol. 40
·期 1
·385-397
·
IF 0.88
Wang Yong,Chen Guihua,Zhang Fumin,Li Liquan
Ni-incorporated SBA-15 magnetic composites were two-stage hydrothermal synthesized from initial strong acidic media through a pH-adjusting method. The structure, morphology, surface area and pore size distribution of the samples were systematically characterized by using XRD, FT-IR, SEM, TEM and N 2 physical adsorption techniques. It was found that, when pH was adjusted to 7, the obtained sample still could exhibit hexagonal mesostructure, very similar to that of the pristine SBA-15 except for a slightly reduced long-range ordering and surface area. However, an increase in the unit cell and wall thickness of the samples suggested the more Ni species were incorporated into the framework of SBA-15. A further increase in pH to 9 produced deterioration of long-range ordering of the sample, possibly resulting from the blocking of some mesopores. Thus, the pH-adjusting method played an important role on the structure of Ni–SBA-15 composites. Measurements taken with increasing applied field revealed the samples having superparamagnetic behaviors. Furthermore, the saturation magnetization values were increased with the more Ni species transforming into magnetic nanoparticles by the increasing pH.
研究领域:
材料科学
·
化学工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2020
·Vol. 12
·期 21
·5504-5510
·
IF 4.853
Zi-Cheng Fu,Joshua T. Moore,Zi-Xin Yang,Jia-Jun Hu,Wen-Fu Fu
Graphical CoP for photocatalysis : Sphericalmesoporous SBA-15-supported CoP nanoparticlecatalysts tuning the highly efficient photocatalytic CO-and H 2 -generating pathways with product selectivity of up to 76.3 %and 99.9 % through switching solvent, respectively, were in situ fabricated by CoP embedded on the surface and interior of the porous s-SBA-15. The highly active spherical hybrid catalysts with diameters of 3–8 μm for robust selective CO 2 photoreduction and hydrogen production by switching solvent, CoP/(i)s-SBA-15 and CoP/(o)s-SBA-15, were in situ synthesized for the first time by incorporating CoP nanoparticles on the interior and outside of the spherical mesoporous Santa Barbara Amorphous (s-SBA)-type material s-SBA-15. CoP/(i)s-SBA-15 has a larger pore diameter of ∼9.5 nm, relative to ∼5.7 nm of CoP/(o)s-SBA-15, and a calculated Brunauer-Emmett-Teller surface area of ∼214 m 2 g −1 compared with ∼336 m 2 g −1 for the latter. In comparison with bare CoP, the composites exhibited excellent catalytic CO- and H 2 -generating performance with product selectivity of up to 76.3 % and 99.9 % through switching solvents containing Ru-based photosensitizer under ambient conditions, respectively. The influences of various solvents and electron donors, as well as the amounts of H 2 O, and catalyst on reaction kinetics for CO 2 reduction and H 2 production, and intrinsic properties of both catalysts were investigated and compared.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Runping Wu,Qing Ye,Kai Wu,Shuiyuan Cheng,Tianfang Kang,Hongxing Dai
The alkali metal (M = Na, K, Rb, and Cs)-modified C-FDU-15 (M-C-FDU-15( x ); x was the M/C-FDU-15 M ratio, and equal to 0.01–0.03) samples were prepared through an in situ process, and characterized by means of the TG, XRD, TEM, EDS, N 2 adsorption–desorption, O 2 -TPD, and CO 2 -TPD techniques. The (NO + O 2 ) adsorption mechanism was investigated using the (NO + O 2 )-TPD and DRIFTS techniques. The results show that the sequence of (NO + O 2 ) adsorption performance was Na-C-FDU-15(0.01) (104.1 mg/g) > K-C-FDU-15(0.01) (92.4 mg/g) > C-FDU-15 (76.2 mg/g) > Rb-C-FDU-15(0.01) (65.1 mg/g) > Cs-C-FDU-15(0.01) (62.3 mg/g). The alkali metal was uniformly distributed in C-FDU-15 and its doping enhanced the amount of the basic sites in the sample. Moreover, the optimal Na/C-FDU-15 M ratio was 0.02. (NO + O 2 ) were chemically adsorbed mainly in the forms of nitrite (NO 2 − ) and nitrate (NO 3 − ) on M-C-FDU-15( x ). A more amount of NO was converted to nitrate than to nitrite. There were three key factors of enhancing the (NO + O 2 ) adsorption capacity of C-FDU-15 due to alkali metal doping: the first factor was the increasing of surface area and pore volume of the sample, the second one was the enhancement in amount of the active sites in the sample, and the third one was the smaller alkali metal ionic radius in the sample.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 24
·13476-13485
·
IF 3.049
Fan Zhang,Chuting Yang,Yi Li,Min Chen,Sheng Hu,Haiming Cheng
P,P-bis (2-oxooxazolidin-3-yl)-N-(3-(triethoxysilyl)propyl)phosphinic amide (APTES-BOP)-modified SBA-15 (SBA-15-BOP) was prepared by a post-synthesis grafting method for the removal of anionic azo dyes from aqueous solutions. The properties of the prepared adsorbent were characterized by PXRD, FT-IR, SEM, TEM, nitrogen sorption, and elemental analysis. Adsorption equilibrium and adsorption kinetic studies demonstrated that the experimental data fitted well with the Langmuir isotherm model and pseudo-second-order model. According to Langmuir fitting, SBA-15-BOP showed high adsorption capacity for CR and RR2 dyes, with the maximum adsorption capacities of 518.1 mg g−1 and 253.8 mg g−1, respectively. The thermodynamic study indicated that the adsorption processes of CR and RR2 dyes on SBA-15-BOP were spontaneous and exothermal. The prepared SBA-15-BOP can be a promising adsorbent for the removal of anionic dyes from aqueous solutions.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2013
·
IF 3.172
Yan Zhao,Bing Yan
GaN-functionalized rare earth (Eu 3+ and Tb 3+ ) organic/inorganic mesoporous nanocomposites have been successfully synthesized (designated as RE(L SBA-15) 3 (L GaN); RE = Eu, Tb; L = TAA Si, BTA Si). The organosilane precursor materials (L SBA-15) are synthesized by co-condensation of tetraethylorthosilicate (TEOS) and the functionalized β-diketones (TAA Si and BTA Si) in the presence of Pluronic P123 surfactant as a template. The modified β-diketones ligands are also used to covalently bond with surface-modified GaN and formed another precursor L GaN. Both of the precursors can coordinate with rare earth ions to synthesize the final mesoporous materials via a sol–gel process. FTIR, TEM, XRD, and nitrogen (N 2 ) adsorption/desorption measurements are employed to characterize the mesostructure of RE(L SBA-15) 3 (L GaN). The luminescence properties and thermogravimetric analysis of all the prepared materials are characterized in detail, and the results reveal that a series of uniformed mesopore structure hybrid materials has been achieved. The mesoporous material Eu(BTA Si SBA-15) 3 (BTA Si GaN) has better luminescence intensity, higher quantum efficiency, and longer lifetime than Eu(TAA Si SBA-15) 3 (TAA Si GaN). While the nanocomposite Tb(TAA Si SBA-15) 3 (TAA Si GaN) revealed the strongest characteristic emission of Tb 3+ ions than Tb(BTA Si SBA-15) 3 (BTA Si GaN), the excellent luminescent properties and thermal stability enable the hybrid mesoporous material to have potential applications in optical field.
研究领域:
材料科学
·
化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2014
·
IF 2.235
Jun Xiong,Wenshuai Zhu,Wenjing Ding,Lei Yang,Yanhong Chao,Hongping Li,Fengxia Zhu,Huaming Li
A heterogeneous catalyst system was synthesized by immobilizing phosphotungstic acid on ionic liquid-modified mesoporous silica SBA-15 and applied in oxidative desulfurization. Structure and properties of catalyst were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), N2 adsorption–desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and the contact angle. The results demonstrated that the synthesized catalyst possessed ordered mesopore structure and high special surface area. Due to the introduction of imidazole-based ionic liquid, the catalyst exhibited good wettability for model oil, which had significant contribution to desulfurization activity. Both DBT and 4,6-DMDBT could be removed completely at mild conditions (60 °C, 40 min). The removal of BT also can reach 81.3% within 60 min. Furthermore, the catalyst was recovered and reused in four reaction runs with a slight decrease in activity.
研究领域:
化学工程
·
催化材料
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Energy & Fuels
·
2018
·Vol. 3
·期 2
·390-395
·
IF 0
Siquan Xu,Chunyu Yin,Donghui Pan,Feng Hu,Yuanfeng Wu,Yanan Miao,Lijing Gao,Guomin Xiao
In this study, a series of Fe3+ modified Amberlyst-15 resins (Fe/AR) were prepared and used as environmentally friendly bifunctional catalysts for the conversion of glucose to 5-hydroxymethylfurfural (HMF). The physicochemical properties of the Fe/AR catalysts were characterized by XRD, SEM-EDX, XPS, TG-DTA and FTIR spectroscopy techniques. It was found that the 10%-Fe/AR catalyst has the ability to synergistically catalyze the isomerization of glucose and the dehydration of fructose in a “one-pot” reaction, and allows an impressive 68% HMF yield to be achieved in the H2O/THF biphasic system. Moreover, the 10%-Fe/AR catalyst still retained the desired catalytic activity after four consecutive cycles.
研究领域:
化学工程
·
催化化学
✓ 已验证
DOI
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Yuwei Yan,Hongyan Li,Songnan Li,Jiawei Zhang,Jingxiang Zhao,Qinghai Cai
PdCl 2 -FeCl 3 -imidazolium ionic liquid immobilized SBA-15 (SIL-PdFe) was prepared via chloropropyltriethoxysilane grafting with the surface Si-OH and N-methyl imidazole with C-Cl bond, followed by PdCl 2 and FeCl 3 coordinating to imidazolium ring. The SIL-PdFe was used as a heterogeneous catalyst for solvent-free Wacker oxidation of styrene with H 2 O 2 oxidant, exhibiting high catalytic performance with styrene conversion of 95.4% and 87.7 % selectivity (54.2% acetophenone and 33.5% benzaldehyde). The catalyst can be easily recovered and effectively reused without a significant loss in the activity and selectivity. The quenching experiments by adding tert -butanol (TBA), 1,4-benzoquinone (p-BQ) and furfural alcohol (FA) in the reaction system were conducted to identify kind of the reactive O species produced by the catalyst activating H 2 O 2 and the reaction mechanism of the Wacker oxidation was then proposed.
研究领域:
化学工程
·
催化材料
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）