ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Daqin Chen,Junni Li,Xiao Chen,Jiangkun Chen,Jiasong Zhong
Currently, metal halide perovskite nanocrystals have been extensively explored due to their unique optoelectronic properties and wide application prospects. In the present work, a facile grinding method is developed to prepare whole-family APbX3 (A = MA, FA, and Cs; X = Cl, Br, and I) perovskite nanocrystals. This strategy alleviates the harsh synthesis conditions of precursor dissolution, atmosphere protection, and high temperature. Impressively, the as-prepared perovskite nanocrystals are evidenced to have halogen-rich surfaces and yield visible full-spectral emissions with maximal photoluminescence quantum yield up to 92% and excellent stability. Additionally, the grinding method can be extended to synthesize widely concerned Mn2+-doped CsPbCl3 nanocrystals with dual-modal emissions of both excitons and dopants. As a proof-of-concept experiment, the present perovskite nanocrystals are demonstrated to be applicable as blue/green/red color converters in UV-excitable white-light-emitting diodes.
研究领域:
材料科学
·
纳米技术
·
光电
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the Taiwan Institute of Chemical Engineers
·
2016
·
IF 2.848
Fan Wang,Zehui Zhang
In this study, a new method was developed for the oxidation of 5-hydroxymethylfurfural (HMF) into 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) over heterogeneous Ru catalyst. Cs-substituted tungstophosphate (CsPW) was prepared by the exchange of H + in H 3 PW 12 O 40 with Cs + , which was then used to immobilize Ru nanoparticles to give the Ru/CsPW catalyst. The Ru/CsPW catalyst was well characterized by TEM, XRD, XPS and FT-IR technologies. The physical characterizations clearly indicated that the spherica Ru nanoparticles with an average size of 2.4 nm were homogeneously dispersed on the surface of the CsPW support. The as-prepared catalyst was studied for the oxidation of HMF, and some important parameters were investigated. The reaction solvent showed a great effect on both HMF conversion and the products selectivity. Aromatic solvents were found to be the best reaction medium for the oxidation of HMF into HMFCA. Increasing the reaction temperature and the amount of the Ru/CsPW catalyst accelerated the HMF conversion and HMFCA yield. High HMF conversion of 97.2% and HMFCA yield of 72.9% were obtained after 12 h at 130 °C with oxygen flow rate of 20 ml/min. Unfortunately, the Ru/CsPW catalyst was not very stable during the reaction, and a slight loss of its catalytic activity was observed during the recycling experiments.
研究领域:
化学
·
催化材料
·
绿色化学
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Ruirui Zhang,Shugui Hua,Yuan Dang,Bing Zhang,Xiaoqin Sun,Sha Yu,Yingying He,Shuangli Chen,Yuanzhen Zhou
In this paper, the electrocatalytic performance of Ti/β-PbO 2 anode was improved by doping Cs into SnO 2 intermediate layer (Ti/Cs-SnO 2 /β-PbO 2 ) for the efficient degradation of fluoroquinolone wastewater. Compared with the conventional Ti/Sb-SnO 2 /β-PbO 2 anode, Cs-SnO 2 with the rougher surface increased the deposition amount and the thickness of β-PbO 2 active layer, thus forming the denser PbO 2 coating with smaller particle size and exposing more active sites. The partial replacement of Sn by Cs with the smaller ion radius induced the deformation of crystal lattice of SnO 2 , which further led the outer β-PbO 2 active layer grew along the advantageous (200) crystal plane and formed more point defects in the crystal lattice of β-PbO 2 . Thereby, the electron transfer rate at the anode interface was accelerated and the electrocatalytic performance of Ti/β-PbO 2 was significantly improved. To verify the practical application of the improved Ti/Cs-SnO 2 /β-PbO 2 electrode, levofloxacin (LFX) and ciprofloxacin (CIP) were selected as the typical target fluoroquinolones to evaluate the degradation efficiency of Ti/Cs-SnO 2 /β-PbO 2 anode. The removal rate exceeded more than 90% for the single and mixed fluoroquinolones wastewater. Moreover, after 5 times’ recycle, the degradation efficiency of LFX on Ti/Cs-SnO 2 /β-PbO 2 anode still remained over 90%. The potential mechanism of the enhanced electrocatalytic performance of Ti/Cs-SnO 2 /β-PbO 2 and the degradation pathways of fluoroquinolones were also inferred. It’s the first time to enhance the electrocatalytic performance of the Ti/β-PbO 2 anode by introducing monovalent alkali metal (C S ) into the SnO 2 intermediate layer and the proposed Ti/Cs-SnO 2 /β-PbO 2 anode would be a promising candidate to realize the efficient removal of the practical fluoroquinolones antibiotic wastewater.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Jingxuan Zhao,Hongxu Liu,Yuanhang Zhao,Yuchao Qi,Ruijia Wang,Ziwei Lv,Yang Yu,Shulin Sun,Yiming Wang,Aihua Xie
Currently, the most effective way to improve the anti-fouling performance of water treatment separation membrane is to enhance the hydrophilicity of the membrane surface, but it can still cause contamination, leading to the occurrence of flux reduction. The construction of a strong hydration layer to resist wastewater contamination is still a challenging task. In this study, a defect-free hydration layer barrier was achieved by grafting chitosan polysaccharide derivatives (CS-SDAEM) on the membrane, which achieved in effective fouling prevention and low flux decline rate. A layer of tannic acid-coated carbon nanotubes (TA@CNTs) has been uniformly deposited on the commercial PVDF membrane so that the surface was rich in -COOH groups, providing sufficient reaction sites. These reactive groups facilitate the grafting of amphiphilic polymers onto the membrane. This modification strategy achieved in enhancing the antifouling performance. The modified membrane achieved low contamination rate with DR of 16.9 % for wastewater filtration, and the flux recovery rate was above 95 % with PWF of 1100 (L·m −2 ·h −1 ). The membrane had excellent anti-fouling performance, which provided a new route for the future development of water treatment membrane.
研究领域:
环境科学
·
材料科学
·
水处理技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2024
·
IF 3.8
Dong-Xue Zhang,Shuai Qu,Yu-Han Liu,Chen Xu,Xiao-Ying Liu,Hong Kan,Kai Dong,Ying-Ping Wang
In this study, we employed a melamine sponge (MS) as the skeleton material and utilized carbonized ZIF-8 (CZIF-8) and chitosan (CS) as the raw materials to prepare CZIF-8/CS-MS, a novel material featuring a three-dimensional interconnected porous network. The resulting CZIF-8/CS-MS material possesses a unique porous structure, significant specific surface area and abundant active sites. These characteristics make CZIF-8/CS-MS a promising absorbent for selective purification of plant growth regulators (PGRs) including 1-naphthlcetic acid (NAA), naphthoxyacetic acid (NOA), 4-chlorophenoxyacetic acid (4-CPA), 2,4-dichlorophenoxyacetic acid (2,4-D). After optimizing the extraction conditions, excellent linearity ( r > 0.9994) was observed within a wide linear range of 1–100 ng/mL using ultra high performance liquid chromatography-tandem quadrupole mass spectrometry. The detection limits (LODs) and limits of quantification (LOQs) were found to be in the range of 0.013–0.154 ng/mL and 0.044–0.515 ng/mL, respectively. Additionally, the relative recovery of Schisandra chinensis fruit samples was determined to be 89.7–99.4 %, with a relative standard deviation (RSDs) of ≤ 8.4 % ( n = 3). Compared to other methods, this approach offers a multitude of benefits, which include but are not limited to exceptional sensitivity, reduced sample volume requirements, low LODs, a comparable linear range, and high reproducibility. The findings of this study pave the way for exploring novel functionalized sponge columns, which leverage the integration of nano-sorbent materials and coating agents, for the purpose of analyzing PGRs within intricate matrix samples.
研究领域:
分析化学
·
植物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Saudi Chemical Society
·
2021
·
IF 3.932
Tao Chen,Yuan Zhao,Ya-nan Sang,Min Tang,Guo-wen Hu,Xiao-bing Han,Jie Gao,Rui Ma
Efficient adsorption and separation of organic dyes in the wastewater is highly desirable for environmental protection. A facile synthesis of magnetic bio-based chitosan (CS) microspheres grafted with sodium polystyrene sulfonate (SPSS) via electron beam radiation is described. The obtained microspheres were characterized by FTIR, SEM, TG and VSM, which demonstrated millimetric magnetic CS-g-SPSS microspheres were obtained with enhanced thermal stability. Experimental parameters such as absorbed dosage, mass ratio, initial pH, initial concentration and contact time for the adsorption were thoroughly investigated. To investigate the adsorption rate and recyclability, evaluation of adsorption kinetic model and adsorption/desorption experiment were conducted.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Haihua Xu,Sidi Zhu,Mingzhu Xia,Fengyun Wang
The efficient removal of Diclofenac sodium (DCF), a nonsteroidal anti-inflammatory drug, has attracted more and more attention. In this work, ternary core-shell CS@PANI@LDH composite was synthesized via the in-situ growth of Mg/Al layered double hydroxide plates onto polyaniline-wrapped carbon sphere and applied for DCF removal. Various influence factors like concentration, pH, time, temperature, and background electrolytes were systematically investigated. The maximum adsorption capacity was 618.16 mg/g. Besides, after 5 regeneration cycles, CS@PANI@LDH still retained high adsorption capacity. The adsorption mechanism was investigated by Fourier transformed infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) characterization analyses. Simultaneously, the Multiwfn program combined the Chimera program was applied to calculate and visualize the localized orbit locator (LOL) of π electrons in DCF − molecule, which explored the π electronic structure and conjugation characteristics of DCF − molecule. Moreover, the Independent Gradient Model (IGM) analysis based on pro-molecular density revealed the interaction sites and interaction strength between DCF and LDH. The adsorption mechanism could be explained through electrostatic interaction and hydrogen bonding between LDH and DCF, π-π interaction between DCF and PANI. It was the synergistic effects of different interactions that improved the adsorption of DCF by CS@PANI@LDH composite.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry B
·
2017
·Vol. 5
·期 22
·4221-4232
·
IF 4.543
Yeying Wang,Xijian Liu,Guoying Deng,Qian Wang,Lijuan Zhang,Qiugen Wang,Jie Lu
In this work, multifunctional polystyrene@chitosan@gold nanoparticles–Fe3O4 nanoparticles–folic acid/indocyanine green (PS@CS@Au–Fe3O4–FA/ICG) nanocomposites that can integrate diagnosis and therapy into one nanoplatform was fabricated. The constructed PS@CS@Au–Fe3O4–FA/ICG nanocomposites possessed excellent computed tomography, magnetic resonance and fluorescence imaging performances which could be used to diagnose tumor and monitor the nanocomposites’ localization in vivo. Moreover, PS@CS@Au–Fe3O4–FA/ICG nanocomposites can be delivered in a targeted manner to cancer cells by folic acid in a receptor-mediated way, and tumor growth could be efficiently inhibited, even completely ablated, under NIR irradiation. That is, the constructed PS@CS@Au–Fe3O4–FA/ICG nanocomposites had great potential for computed tomography, magnetic resonance and fluorescence imaging performances, which could be used to diagnose tumors and to monitor local therapy and fluorescence imaging-guided targeted therapy of cancer cells using nanocomposites.
研究领域:
生物医学工程
·
癌症治疗
·
纳米医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Jingxuan Zhao,Hongxu Liu,Yuchao Qi,Ruijia Wang,Ziwei Lv,Yang Yu,Shulin Sun
With the rapid development of industry, the problem of water pollution has become increasingly serious. Though there are many separation materials available to solve this problem, how to separate multiple wastewater at the same time remains a challenge. Hydrogel coating is suitable for use in the field of oil–water separation, and chitosan (CS) is effective in removing anionic dyes. Therefore, the preparation of separation membranes with hydrogel coating containing CS and dopamine (DA) can effectively separate oil–water emulsion and anionic dye wastewater. In this paper, DA@CNTs/CS hydrogel coating was prepared by sequentially coating Cu 2+ , DA@CNTs, Cu 2+ and CS on the surface of polyvinylidene fluoride (PVDF) membrane by deposition of self-assembly, which enhanced the hydrophilicity of the membrane and made it highly underwater oleophobic and antifouling. The alkali treated PVDF membrane contained a large amount of –OH, Cu 2+ , which formed coordination bonds with –OH, CS, and DA and the hydrogel coating could be stably loaded on the membrane. In addition, the introduction of rigid CNTs effectively improved the performance of the modified membrane under extreme conditions such as high pH and high salt concentration. PVDF-DA@CNTs/CS membrane had an ideal pure water flux (PWF) of 1470 (L·m −2 ·h −1 ) and the separation efficiency of 99.7 % for anionic dye and 99.4 % for oil–water emulsion. The contaminant on the membrane surface can be quickly removed by washing with DI water. The overall performance of the membrane is also maintained at a very high level of long-term filtration of wastewater. In summary, this study provides a new approach to complex wastewater treatment technology.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2022
·Vol. 32
·期 21
·2112717
·
IF 19.924
Yi-Ming Zhao,Lin Cheng,Kai-Yao Wang,Xin Hao,Juan Wang,Jia-Ying Zhu,Meng Sun,Cheng Wang
Switchable coadsorption and separation for elimination/partitioning of Cs + and Sr 2+ is achieved by pH-controlled ion exchange using a potassium thioantimonate K 2 Sb 4 S 7 ·2H 2 O ( SbS-1K ) with fantastic pH durability from diluted NaOH (pH 12) to concentrated HCl (3 m ). At pH 6, SbS-1K exhibits ultrafast adsorption kinetics ( R ≈ 90% in 2 min for Cs + and 20 min for Sr 2+ ) and high removal rates ( R ≈ 98–99%) at equilibrium for both Cs + and Sr 2+ . At pH 2, the Sr 2+ adsorption is inhibited by H + with a great loss in R Sr to 11.18%, whereas the R Cs remains at 96.99%, contributing to a top-ranked separation factor SF Cs/Sr of 256. The SbS-1K -filled ion exchange column can be switched between the eliminating ( R Cs > 99.91%; R Sr > 98.19%) and separating ( R Cs > 98.99%; R Sr ≈ 0±3%) modes for treating continuous flow with a variation from pH 6 to pH 2 or vice versa. The SbS-1K /PTFE membrane exhibits coadsorption and separation effects for filtration of low concentrated mixed Cs + and Sr 2+ solution (1 ppm for each), even at an ultrafast vacuum filtration speed (30 mL min –1 ). Combined with easy synthesis and high β/γ irradiation resistance, SbS-1K represents a new-concept bifunctional exchanger with discriminating intelligence for equipment innovation.
研究领域:
环境科学
·
材料科学
·
核废料管理
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Yongpan Shan,Yajie Ma,Changcai Wu,Xiangliang Ren,Xianpeng Song,Dan Wang,Hongyan Hu,Xiaoyan Ma,Yan Ma
Control release of pesticides based on target plant characteristics is highly desirable for improving the effective utilization rate and reducing non-target organism risks. Here, the controlled release formulations (Cu-CS@IN@MIL-100 (Fe)) were successfully prepared by employing MIL-100 (Fe) as the carrier material, indoxacarb (IN) as the model pesticide, and chitosan (CS) as a coating to chelate copper ions by chemical crosslinking. The prepared Cu-CS@IN@MIL-100 (Fe) had an acceptable loading content (36.25 %). The introduction of CS and copper ions endowed it with sustained release properties under weak acidity conditions like cotton leaves. The laboratory bioassay experiments showed that Cu-CS@IN@MIL-100 (Fe) had practical good insecticidal activity (LC 50 = 4.936 mg/L) in controlling Helicoverpa armigera larvae. For long-term control efficacy experiments, after 14 days of application, the Cu-CS@IN@MIL-100 (Fe) treatment (73 %) mortality of Helicoverpa armigera larvae was significantly higher than the 15 % indoxacarb suspension concentrates (SC) treatment (27 %). Moreover, Cu-CS@IN@MIL-100 (Fe) had no adverse effect on cottonseed germination and the acute toxicity to Chrysopa pallens larvae was significantly lower than IN SC. Therefore, MIL-100 (Fe) could be used as an ecological safety carrier for pesticide delivery to improve IN effective utilization and reduce non-target organism risks.
研究领域:
农业科学
·
农药科学
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Laser & Photonics Reviews
·
2024
·
IF 9.8
Wei Liao,Xinquan Zhou,Jiance Jin,Yuzhen Wang,Zhiguo Xia
Thermochromic luminescent materials (TLMs) with spectral responsiveness to thermal stimuli have received broad attention due to the forefront applications in temperature visualization and sensing technologies. Herein, a phase diagram-driven strategy for designing TLMs in Cs–Cd–Br ternary system is presented. The room temperature stable Cs 7 Cd 3 Br 13 crystal is first obtained by utilizing a facile hydrothermal method, and the self-trapped exciton (STE) luminescence is improved by breaking local symmetry via Mg 2+ doping. Then thermochromic luminescence is further realized in Mn 2+ co-doped Cs 7 Cd 3 Br 13 on the basis of reversible structural transition to metastable Cs 2 CdBr 4 under thermal stimuli. The emission color change from bright yellow to green benefits from the variation of crystal fields around Mn 2+ , which can be switched by heating and cooling circulations. Finally, the resulting material is used as a demo to visualize the temperature of a homemade high-frequency induction heating sintering platform.
研究领域:
材料科学
·
光学工程
·
温度传感技术
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）