COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yuanhao Luo,Ling Lin,Pingya Luo,Xingchun Li,Wen Ren,Tianhai Yi
In deep and ultra-deep well drilling, ultra-high temperatures and high salt lead to poor drilling fluid performance. In this study, N, N-dimethylacrylamide (DMAA), dimethyldiallylammonium chloride (DMDAAC), 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), 4-acryloylmorpholine (ACMO) and modified laponite (m-LAP) were polymerized into polymer nanocomposites PDADA-LAP by free radical polymerization in aqueous solution. The structure of PDADA-LAP was characterized by FT-IR, 1 H NMR and XPS. The microstructure of PDADA-LAP was characterized by TEM, SEM and EDS. The results showed that LAP improved the network structure of the polymer by hydrogen bonding and covalent bonding. The effect of temperature on the degradation of the polymer solution was investigated. The experiment showed that the degradation temperatures of the polymer was 220 °C. PDADA-LAP was used as a filtrate reducer in drilling fluids. The results showed that 3.0 wt% PDADA-LAP could improve the filtration performance of drilling fluids at high temperature of 220 °C and resist contamination with 20 wt% NaCl. The FL API and FL HTHP were 7.0 mL and 28.6 mL, respectively. PDADA-LAP is adsorbed on bentonite particles through hydrogen bonding and electrostatic interaction, which slows down the contamination of bentonite particles by NaCl and gives the drilling fluid a good effect to reduce fluid loss at high temperature and high salt.
研究领域:
材料科学
·
石油工程
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 8.2
Yu Jiang,Xiangye Li,Guang Liu,Yuan Li,Zhijiang Sun,Wei Wang,Fen Ran
The widespread use of portable electronic devices has sparked interest in zinc-ion hybrid capacitors as an ecofriendly, safe, and cost-efficient energy storage solution. However, balancing the mechanical properties and high ionic conductivity of zinc-ion hybrid capacitor electrolytes presents a significant challenge. This study introduces a polyacrylamide hydrogel (PAM) electrolyte containing nanoparticle Laponite (Lap), demonstrating outstanding mechanical properties and high ionic conductivity. Furthermore, when ZnSO4 is introduced into the gel electrolyte, it reduces system dependence and decreases the water freezing point, expanding the hydrogel’s operational temperature range. Consequently, the prepared gel electrolyte has a high ionic conductivity of 45.3 mS·cm–1 and excellent flexibility and can operate stably in both zinc-ion hybrid capacitors and sensors. This research provides an effective approach for developing hydrogel electrolytes with broad voltage windows, high ionic conductivity, and favorable mechanical characteristics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Theranostics
·
2019
·
IF 8.063
Chenggui Wang,Zhe Gong,Xianpeng Huang,Jingkai Wang,Kaishun Xia,Liwei Ying,Jiawei Shu,Chao Yu,Xiaopeng Zhou,Fangcai Li,Chengzhen Liang,Qixin Chen
Rationale: Spinal cord injury (SCI) remains a critical clinical challenge. The controlled release of FGF4, a novel neuroprotective factor, from a versatile Laponite hydrogel to the injured site was a promising strategy to promote axon regeneration and motor functional recovery after SCI. Methods: Characterization of Laponite, Laponite/Heparin (Lap/Hep) and Laponite/Heparin loaded with FGF4 (Lap/Hep@FGF4) hydrogels were measured by rheometer. Multiple comprehensive evaluations were used to detect motor functional recovery and the axonal rehabilitation after Lap/Hep@FGF4 treatment in vivo (SCI rat model). Moreover, microtubule dynamic and energy transportation, which regulated axonal regeneration was evaluated by Lap/Hep@FGF4 gel in vitro (primary neuron). Results: FGF4 released from Lap/Hep gel locally achieves strong protection and regeneration after SCI. The Lap/Hep@FGF4 group revealed remarkable motor functional recovery and axonal regrowth after SCI through suppressing inflammatory reaction, increasing remyelination and reducing glial/fibrotic scars. Furthermore, the underlying mechanism of axonal rehabilitation were demonstrated via enhancing microtubule stability and regulating mitochondrial localization after Lap/Hep@FGF4 treatment. Conclusion: This promising sustained release system provides a synergistic effective approach to enhance recovery after SCI underlying a novel mechanism of axonal rehabilitation, and shows a translational prospect for the clinical treatment of SCI.
研究领域:
神经科学
·
生物医学工程
·
药理学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Qi Jiang,Ping Li,Bin Wang,Jiu-Hua She,Yun Liu,Ping Zhu
Inorganic-organic hybrid coatings prepared via an impregnation assembly of eco-friendly materials exhibited dramatically flame-retardant properties on flexible polyurethane foam (FPUF). A nickel-complex of tea polyphenols (TP-Ni) was synthesized, and TP-Ni and laponite (LAP) were coated on the surface of FPUF. LAP/TP-Ni can be homogeneously dispersed on the surface of FPUF. Moreover, the melt-dripping phenomenon of 1LAP/4TP-Ni/FPUF was completely inhibited during the vertical flame test (UL-94) with 41.2 wt% weight gain, and it showed self-extinguished behaviors at once and passed the UL-94 V-0 rating. Additionally, the values of peak heat release rate and peak smoke production rate of 1LAP/4TP-Ni/FPUF were reduced by 71.6% and 60.9%, compared with the control. The content of gaseous toxic substances, such as CO and NCO-containing compounds, was also decreased, indicating the effect of TP-Ni/LAP on the toxicity suppression of flame-retardant FPUF. Encouragingly, the coatings deteriorated the tensile property of FPUF inconspicuously. Interestingly, the coatings do not contain traditional flame retardant elements, which offers an innovative approach for designing flame retardants. Thus, these inorganic-organic hybrid coatings show the promising potential to decrease the fire risk of FPUF.
研究领域:
材料科学
·
防火安全
·
有机无机杂化材料
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Lanlan Dong,Ziheng Bu,Yinze Xiong,Hang Zhang,Jinhui Fang,Hongxing Hu,Zhongtang Liu,Xiang Li
The extrusion 3D printing of hydrogels has evolved as a promising approach that can be applied for specific tissue repair. However, the printing process of hydrogel scaffolds with high shape fidelity is inseparable from the complex crosslinking strategy, which significantly increases the difficulty and complexity of printing. The aim of this study was to develop a printable hydrogel that can extrude at room temperature and print scaffolds with high shape fidelity without any auxiliary crosslinking during the printing process. To this end, a novel formulation consisting of a Laponite suspension with a high solid concentration and a gelatine methacrylate (GelMA) nanocomposite hydrogel was developed. A homogeneously dispersed high-concentration (up to 20% w/v) Laponite suspension was obtained by stirring at 0 °C. The addition of Laponite with high concentration improved the rheological properties, the degradation stability, and the mechanical strength of the hydrogel. The formulation of 15% (w/v) GelMA and 8% (w/v) Laponite nanocomposite hydrogel exhibited desirable printability and biocompatibility. The GelMA/Laponite hydrogels significantly promoted bone marrow mesenchymal stem cell (BMSC) proliferation and osteogenic differentiation. Both desirable printability under mild conditions and cyto-compatibility enable composite hydrogel a potential candidate as biomaterial inks to be applied for bone tissue regeneration.
研究领域:
生物材料学
·
组织工程学
·
再生医学
✓ 已验证
产品关联
DOI
高影响因子
CRYSTENGCOMM
·
2021
·Vol. 23
·期 15
·2793-2800
·
IF 3.545
Xueshuai Chen,Rongli Jiang,Yu Gao,Zihan Zhou,Xingwen Wang
In this work, nano-ZSM-5 zeolite with superior catalytic properties was synthesized from LAPONITE® as one of the Si sources by a dry gel conversion (DGC) method, and its crystallization mechanism was investigated as well. The properties of ZSM-5(Z-L) synthesized from LAPONITE® as one of the Si sources and ZSM-5(Z-T) synthesized from tetraethylorthosilicate (TEOS) as a single Si source have been compared. The results show that LAPONITE® is an important factor for the formation of nanocrystals with high crystallinity. It can not only act as the Mg and Si source for the zeolite synthesis but also exert a “confined space” effect to control ZSM-5 crystal growth. The Z-L sample with nanosized crystals can shorten the reactant and product diffusion path length, which seriously improves diffusion efficiency and results in longer catalytic stability. This work provides a novel and efficient route for synthesis of nano-ZSM-5 zeolite.
研究领域:
材料科学
·
化学工程
·
催化
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
Petroleum Science
·
2025
·
IF 6.1
Li-Yao Dai,Jin-Sheng Sun,Kai-He Lv,Ying-Rui Bai,Bo Liao,Dong-Qing Yang,Chao-Zheng Liu,Mei-Chun Li
Fractures in geological formations, which are commonly encountered during oil and gas exploration, pose significant challenges by facilitating fluid loss and reducing wellbore stability. Polymer gels hold significant promise as lost circulation materials due to their excellent deformability under pressure and self-adaptability. However, conventional gels face certain limitations, such as poor retention of gel-forming suspensions in fractures, low structural strength, and instability at high temperatures. These issues result in low pressure-bearing capacity and, consequently, reduced effectiveness in sealing formation fractures. This study presents the synthesis of a supramolecular polymer gel (SPG) composed of acrylamide (AM), 2-acrylamide-2-methylpropanesulfonic acid (AMPS), divinylbenzene (DVB), polyvinyl alcohol (PVA), TEMPO-oxidized cellulose nanofibers (CNFs), and laponite via in situ radical polymerization. Due to the synergistic effects of hydrogen bonding and electrostatic interactions, the supramolecular polymer gel-forming suspension exhibits high retention capacity in fractures. The as-synthesized gels demonstrate remarkable temperature resistance and high mechanical strength, attributed to covalent bonding, multiple hydrogen bonding, and electrostatic interactions, along with the high aspect ratio and modulus of CNFs and laponite. This study broadens the application scope of CNFs, laponite, and SPGs, offering a novel approach for the efficient development of unconventional oil and gas resources.
研究领域:
材料科学
·
石油工程
·
高分子化学
·
纳米复合材料
·
油田化学
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Bio
·
2024
·
IF 8.7
Linquan Zhou,Chengcheng Zhang,Tengbin Shi,Dingwei Wu,Huina Chen,Jiaxin Han,Dehui Chen,Jinxin Lin,Wenge Liu
The migration and differentiation of bone marrow mesenchymal stem cells (BMSCs) play crucial roles in bone repair processes. However, conventional scaffolds often lack of effectively inducing and recruiting BMSCs. In our study, we present a novel approach by introducing a 3D-bioprinted scaffold composed of hydrogels, with the addition of laponite to the GelMA solution, aimed at enhancing scaffold performance. Both in vivo and in vitro experiments have confirmed the outstanding biocompatibility of the scaffold. Furthermore, for the first time, Apt19s has been chemically modified onto the surface of the hydrogel scaffold, resulting in a remarkable enhancement in the migration and adhesion of BMSCs. Moreover, the scaffold has demonstrated robust osteogenic differentiation capability in both in vivo and in vitro environments. Additionally, the hydrogel scaffold has shown the ability to induce the polarization of macrophages from M1 to M2, thereby facilitating the osteogenic differentiation of BMSCs via the bone immune pathway. Through RNA-seq analysis, it has been revealed that macrophages regulate the osteogenic differentiation of BMSCs through the AMPK/mTOR signaling pathway. In summary, the functionalized GelMA/Laponite scaffold offers a cost-effective approach for tailored in situ bone regeneration.
研究领域:
组织工程
·
生物材料
·
再生医学
·
骨免疫学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Gels
·
2025
·Vol. 11
·期 7
·472
·
IF 5.3
Liyao Dai,Jinsheng Sun,Kaihe Lv,Yingrui Bai,Jianlong Wang,Chaozheng Liu,Mei-Chun Li
Lost circulation during drilling has significantly hindered the safe and efficient development of oil and gas resources. Supramolecular polymer gel–based lost circulation materials have shown significant potential for application due to their unique molecular structures and superior performance. Herein, a high–performance supramolecular polymer gel was developed, and the influence of reservoir conditions on the performance of the supramolecular polymer gel was investigated in detail. The results identified an optimal formulation for the preparation of supramolecular polymer gel comprising 15 wt% acrylamide, 3 wt% 2-acrylamide-2-methylpropanesulfonic acid, 2.6 wt% divinylbenzene, 5 wt% polyvinyl alcohol, 0.30 wt% cellulose nanofibers, and 3 wt% laponite. The performance of the gel-forming suspension and the resulting supramolecular polymer gel was influenced by various factors, including temperature, density, pH, and the intrusion of drilling fluid, saltwater, and crude oil. Nevertheless, the supramolecular polymer gels consistently exhibited high strength under diverse environmental conditions, as confirmed by rheological measurements. Moreover, the gels exhibited strong plugging performance across various fracture widths and in permeable formations, with maximum breakthrough pressures exceeding 6 MPa. These findings establish a theoretical foundation and practical approach for the field application of supramolecular polymer gels in complex geological formations, demonstrating their effectiveness in controlling lost circulation under challenging downhole conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2019
·Vol. 137
·期 18
·48608
·
IF 2.188
Haokun Shen,Kaihe Lv,Xianbin Huang,Jingping Liu,Yingrui Bai,Jintang Wang,Jinsheng Sun
Wellbore instability caused by water invasion is the main problem in oil and gas drilling operation. This study reports the utilization of a hydrophobic-associated polymer-based laponite nanolayered silicate composite as a filtrate reducer in water-based drilling fluids (WDFs). The thermal performance and micromorphology of the composite were analyzed by thermogravimetric analysis, transmission electron microscope, and field emission scanning electron microscopy. The results indicated that the composite possessed a “bean pod” structure and a good thermal stability. The rheological properties of the composite solution were evaluated. The results showed that the hydrophobic association interaction of the composite is weak but existent, and the crosslink network structure is variable. The applied performances of WDFs containing the composite were also evaluated. Evaluation results showed that the composite could improve the properties of the thermal stability, salt tolerance, and fluid loss control of WDFs. The particle size distribution of WDFs and the micrographs of filter cakes explained the improving. The composite was expected to be applied as an efficient filtrate reducer for developing high performance drilling fluids. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137 , 48608.
研究领域:
材料科学
·
石油工程
✓ 已验证
产品关联
DOI
高影响因子
Science China-Technological Sciences
·
2022
·Vol. 65
·期 10
·2304-2316
·
IF 3.903
Dai Nan,Feng Li,Zhao Li,Song Dan,Dai XingJian,Liu XiaoYing,Zhang YuXin
A one-step hydrothermal method was used to synthesize two-dimensional layered Laponite nanosheets (Laponite@diatomite) in situ on the three-dimensional biological template diatomite. The cationic dye removal ability of Laponite@diatomite with different diatomite content was studied. X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transformed-infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and N 2 adsorption-desorption technology were used to characterize synthetic materials. The effects of pH, initial concentration, dynamics, and thermodynamics behavior on the adsorption performance were further studied. La@D-0.1 had the highest adsorption efficiency, and the adsorption rate of methylene blue (MB) solution (450 mg L −1 ) reached 76.7% in the initial 5 min. At the time of adsorption equilibrium (1 h), methylene blue adsorption rate reached 86.4%. The adsorption behavior of La@D-0.1 on MB was characterized by Langumuir isotherm and with better fitting to the quasi-second-order kinetic model curve. By calculating the adsorption process’s thermodynamic parameters, we were able to illustrate that the adsorption process was exothermic. This work provides a novel idea for the synthesis of an economical and ideal, cationic dye nano-adsorbent and provides a potential application for the purification of actual dye wastewater.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
Biomedical Materials
·
2022
·Vol. 17
·期 5
·055008
·
IF 4.103
Zini Liu,Xueqi Chen,Chen Li
Asymmetrical dressings, which are composed of a compact top layer and a porous bottom layer, are commonly used to mimic the characteristics and structure of the epidermis and dermis layers, and overcome the flaws of traditional dressings such as wound dryness and bacterial penetration. Herein, a bio-inspired double-layer asymmetric wettable wound dressing was prepared by low-temperature 3D printing coupled with electrospinning technology. The hydrophobic top layer of poly(caprolactone)(PCL) film produced by electrospinning was used to simulate the compact and air-permeable epidermis. The hydrophilic bottom layer of the dressing, a scaffold composed of chitosan and copper ions doped Laponite (Cu@CS-Lap) was used to kill bacteria and speed up wound healing. Additionally, the composite dressings also showed excellent cytocompatibility and antibacterial properties in vitro experiments. The migratory area of Cu-doped group human umbilical vein endothelial cells increased by about 48.19% compared to the control group, as revealed by the results of the cell scratch experiment. Furthermore, in vivo experiments in rats showed that wound closure at the 0.5Cu@CS5-PCL dressing reached 98.24% after 12 days, indicating the enormous potential of asymmetric double dressings in boosting wound healing.
研究领域:
生物材料
·
组织工程
·
伤口愈合
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）