NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 27
·13303-13314
·
IF 3.925
Juan Wang,Zongxue Yu,Ximei Zhu,Xuehan Xiao,Yao Pang,QiuYue Tan,Yucheng Liu
It is always concerning about how to remove oil–water emulsions and dyes simultaneously and how to find a suitable separation film. Therefore, a modified super-hydrophilic anti-fouling separation film was prepared by combining NH2-MIL-125(Ti) with reduced graphene oxide (RGO), obtained through modifying graphene oxide (GO), with polydopamine (PDA). The complex film contains hydrophilic functional groups such as carboxyl, amino and benzene rings. It has super-hydrophilicity and super-hydrophobicity underwater, because of the presence of RGO and nanomaterials. The complex film has a high throughput and retention rate for separating oil–water emulsions and dyes. The oil–water retention rate is above 99% (flux > 600 L m−2 h−1) and the dye retention rate is above 99% (flux > 700 L m−2 h−1) except for Congo red. Furthermore, the oil–water retention rate is still close to 99.4%, and the retention rate is above 96% after ten cycles. In addition, the composite film has some stability even after immersion under strong acid and alkali conditions for 30 days. The prepared composite film shows good prospects for the simultaneous removal of oil–water emulsions and dye contaminants.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Jie Zhao,Bingzhang Li,Zongyang Liu,Danling Dai,Yuqi Li,Ronghui Shi,Hui Zhang
Sodium alginate (SA) aerogels have shown outstanding potential as regenerative adsorbent materials in the field of wastewater purification. Although SA aerogel adsorption has been demonstrated as a simple and resultful method for removing dyes, it has the limitation that it only transfers or concentrates dyes on the adsorbate, and does not actually degrade them. In this study, a three-dimensional (3D) MIL-125/g-C 3 N 4 /SA (CNTi-125@SA) composite aerogel with visible light photocatalytic activity was achieved for photocatalytic degradation of organic dyes, via in-situ growth, blending and freeze-drying strategy. The results demonstrate that CNTi-125@SA has high catalytic activity for the dyes rhodamine B (RhB), methylene blue (MB) and methyl orange (MO), and the degradation rate can reach up to 99.23%. Impressively, the composite aerogel exhibits excellent antibacterial ability, and the antibacterial rate can reach up to 100% against E. coli . In addition, the developed composite aerogel has excellent reusability and stability, and the degradation efficiency can still reach 85% after seven repeated tests. Owing to their high catalytic activity, excellent antibacterial properties and stability, the CNTi-125@SA composite aerogel can be potentially used in a wide range of dye wastewater purification.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Food Analytical Methods
·
2022
·Vol. 15
·期 10
·2830-2839
·
IF 3.498
Tang Jing,Li Jie,Liu Tianna,Tang Wenjing,Li Nali,Zheng Shengbiao,Guo Jiahao,Song Changchun
Electrochemical determination of tert-butylhydroquinone (TBHQ) is vital to food safety due to negative health effects; however, bare electrode of traditional electrochemical sensors generally has a narrow linear range and low sensitivity, limiting their practical application. Accordingly, the nano-architecture fabricated with N-doped TiO 2 –carbon nano-composites (TiO 2 /NC) is prepared by the thermolysis of NH 2 functionalized MIL-125(Ti) metal–organic frameworks (NH 2 -MIL-125(Ti)). TiO 2 /NC composites are firstly developed as the electrochemical material for electrochemical determination of TBHQ. The TiO 2 /NC composites with a highly porous structure, excellent conductivity and electron transportation, and large surface area show remarkable electrochemical oxidation ability for TBHQ. Under optimal conditions, TiO 2 /NC composite-modified electrode presents a broader linear response to TBHQ concentration of 0.05–100 μM with the detection limit as low as 4 nM (S/N = 3). Finally, the sensor platform is implemented directly to determine TBHQ in edible oil for evaluation of its practical application. TiO 2 /NC composites sensor fabricated perform larger linear range with high sensitivity and anti-interference properties, which can be used as a potential for electrochemical determination of TBHQ.
研究领域:
材料科学
·
分析化学
·
食品科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Hao Tu,Huihu Wang,Huang Xu,Ziguan Zhang,Guode Chen,Chenhuinan Wei,Xing Xiang,Zhixiong Xie
In this work, a series of ZnIn 2 S 4 nanosheets encapsulated NH 2 -MIL-125(Ti) heterostructures (NM-125(Ti)@ZIS) have been rationally designed and established through a facile oil bath method. The photocatalytic Cr(VI) reduction and H 2 evolution performance on NM-125(Ti)@ZIS were elaborately modulated by adjusting the mass ratio of two components, introducing S vacancy and loading cocatalysts. The experimental results demonstrate that the optimized NM-125(Ti)@ZIS heterostructure with mass ratio 3:1 of NM-125(Ti) to ZIS has an excellent Cr(VI) reduction performance in neutral solution, giving 98% reduction efficiency within 60 min. Moreover, the NM-125(Ti)@ZIS heterostructure, following the introduction of sulfur vacancies and the incorporation of Pt nanoclusters , demonstrates an optimal visible light (λ > 420 nm) hydrogen evolution rate of 4.708 mmol/g/h, which is 5.82 times greater than that of pristine ZIS. A thorough investigation of the microstructures and photoelectrochemical properties of the NM-125(Ti)@ZIS heterostructures reveals that the intimate contact interface, sulfur vacancy, and Pt nanocluster serve to effectively enhance charge separation efficiency, thereby improving the photocatalytic performance. Further analysis on the charges behavior at the interface verifies that a novel Z-scheme heterojunction has been constructed between ZnIn 2 S 4 and NH 2 -MIL-125(Ti).
研究领域:
材料科学
·
化学
·
光催化
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2022
·
IF 7.336
Shuangchao Sheng,Zheng Zhang,Meng Wang,Xin He,Caiyun Jiang,Yuping Wang
Because of the tenacious vitality of tetracycline, it would also cause toxic effects on surface water at low concentrations. Therefore, it was critical to design the material as a platform with specific selective sensing functions and promote removal. A MIL-125(Ti)-derived cake-like TiO 2 with recognition sites (MT450) were successfully compounded by a simple mixed-solvent thermal method and using calcination method. MT450 not only inherited the large specific surface area of MIL-125(Ti), but also had excellent photoelectrochemical properties and introduced numerous recognition sites to give it the ability to quickly and specifically recognize and bind antibiotics, and improved the selectivity and sensitivity of photoelectrochemical detection effect. The results showed that MT450/ITO modified electrode was explored as novel photoelectrochemical sensor, which presented remarkable performance for tetracycline detection in a wide linear range from 0.005 to 50 μM and the LOD was estimated as 2.83 nM. Because the imprinted cavity made the affinity between tetracycline and MT450 greater, and was profit to the opening of the electron/hole transfer channel. The proposed strategy showed that the Ti-MOFs derived material with imprinted cavities can be evaluated the selective detection of photoelectrochemistry. Furthermore, the selective effects of the molecularly imprinted materials were evaluated by photocatalytic degradation of pollutants experiment.
研究领域:
材料科学
·
环境科学
·
分析化学
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2021
·
IF 8.271
Liping Yang,Jiacheng Xing,Danhua Yuan,Lin Li,Yunpeng Xu,Zhongmin Liu
MIL-125 is a metal-organic framework with great potential for the adsorption and separation of xylene isomers. However, MIL-125 is usually synthesized under anhydrous and anaerobic conditions. In this study, homogeneously shaped and highly crystalline MIL-125 was synthesized by introducing water-resistant titanium-containing oligomers into the synthesis process. With the assistance of the novel oligomers, MIL-125 can be synthesized in the presence of water, which meets batch-production requirements. The adsorption separation performance of the obtained highly crystalline MIL-125 was also significantly enhanced. The para- xylene/ meta- xylene selectivity can reach 13.5 in mesitylene, which is higher than the selectivity values of most previously reported para -selective adsorbents. The MIL-125 xylene separation performance was verified using both batch adsorption and breakthrough experiments in the liquid phase. In addition, the influence of the solvent effect was evaluated through microcalorimetric experiments, liquid-phase adsorption experiments, and theoretical calculations.
研究领域:
材料科学
·
化学工程
·
吸附技术
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Wentao Zhang,Wenguang Huang,Jiyuan Jin,Yonghai Gan,Shujuan Zhang
The importance of singlet oxygen ( 1 O 2 ) in synthesis of fine chemicals, inactivation of viruses and bacteria, degradation of pollutants, and photodynamic therapy has promoted the research on photocatalytic generation of 1 O 2 . Metal-organic frameworks (MOFs), owing to the tunable structure, are good candidate photocatalysts for 1 O 2 generation. However, due to the poor visible-light absorption capacity and the invalid recombination of charge carriers, the 1 O 2 generation yields of most MOFs are still limited. Here, we demonstrate that β -diketone anchoring could improve the photocatalytic generation of 1 O 2 by MIL-125 through enhanced energy transfer. The enhanced energy transfer was attributed to both the narrowed bandgap and the diketone-derived oxygen vacancies, which function as the trapping sites for charge carriers. The results here shed light on the generation of 1 O 2 by visible-light-responsive MOFs and provide a new strategy for the design of MOFs-based photocatalysts.
研究领域:
光催化
·
材料科学
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Yaoxun Zeng,Jiongpeng Yuan,Zhili Ran,Xiaoguang Zhan,Xinyi Li,Huiling Ye,Jiapeng Dong,Guining Cao,Zhenxing Pan,Ying Bao,Junze Tang,Xujie Liu,Yan He
Surgical resection remains the primary treatment modality for bone tumors. However, it is prone to local bone defects and tumor recurrence. Therefore, there is an urgent need for multifunctional biomaterials that combine tumor treatment and bone repair after bone tumor surgery. Herein, a chitosan composite scaffold (CS/DOX@Ti-MOF) was designed for both tumor therapy and bone repair. Among them, the amino-functionalized Ti-based metal-organic framework (NH 2 -MIL-125 (Ti), Ti-MOF) has a high specific surface area of 1116 m 2 /g and excellent biocompatibility, and promotes osteogenic differentiation. The doxorubicin (DOX) loading capacity of Ti-MOF was 322 ± 21 mg/g, and DOX@Ti-MOF has perfect antitumor activity. Furthermore, the incorporation of DOX@Ti-MOF improved the physical and mechanical properties of the composite scaffolds, making the scaffold surface rough and favorable for cells to attach. CS/DOX@Ti-MOF retains the unique properties of each component. It responds to the release of DOX in the tumor microenvironment to remove residual tumor cells, followed by providing a site for cell attachment, proliferation, and differentiation. This promotes bone repair and achieves the sequential treatment of postoperative bone tumors. Overall, CS/DOX@Ti-MOF may be a promising substitute for postoperative bone tumor clearance and bone defect repair. It also provides a possible strategy for postoperative bone tumor treatment.
研究领域:
生物材料
·
组织工程
·
癌症治疗
·
骨科手术
·
药物递送系统
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2024
·
IF 6.9
Zhenbo Wu,Jinjuan Xue,Zhaoxia Chen,Yiting Lv,Shuaishuai Ma,Jinku Ma,Mingxin Wang
Membrane technology for wastewater remediation has generated significant interest, however, the single functionality, dull wettability and easy fouling property of the membrane hinder its practical application. Herein, a self-cleaning and multi-use superwetting nanofiber membrane was prepared by electrospinning and subsequent spraying technique. The sulfonated cobalt phthalocyanine/NH 2 -MIL-125 (CoPcS/NMIL) heterojunction was uniformly enrobed over polyethylene terephthalate (PET) electrospun membrane derived from waste PET bottles. The unique CoPcS/NMIL heterojunction exhibited a dual driving effect in photocatalytic activity and membrane wettability. Therefore, the fabricated CoPcS/NMIL@PET composite membrane demonstrated its capability to address complex water pollution issues effectively. The composite membrane exhibited notable flux permeation ability (538–3180 L m −2 h −1 ) and achieved excellent separation efficiency of over 99 % for diverse oil-in-water emulsions under the gravity filtration condition. Notably, the membrane can efficiently deal with stubborn high-viscosity crude oil fouling profiting from the photocatalytic self-cleaning function. A high flux recovery ratio of 93.6 % and a low irreversible fouling resistance ratio of 6.4 % can be obtained after 30 min of visible light irradiation. Impressively, CoPcS/NMIL@PET membrane exhibited enhanced permeation flux, separation efficiency and self-cleaning capacity compared to NMIL@PET membrane. Meanwhile, the CoPcS/NMIL@PET-activated peroxomonosulfate (PMS) system exhibited extremely high degradation performance for RhB under visible light with the degradation efficiency of 98 % within 10 min, suggesting its potential in the rapid purification of water-soluble organic pollutants . In addition, the CoPcS/NMIL@PET membrane has good chemical stability and mechanical properties for potential long-term use. Moreover, the demulsification mechanism in oil-water separation and PMS-photocatalysis synergetic mechanism over the fabricated CoPcS/NMIL@PET membrane were also investigated in detail. The research offers a promising approach for the design and fabrication of novel nanofiber membranes that incorporate photosensitizers and MOFs functional surfaces to address the challenges associated with such wastewater treatment .
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2020
·
IF 7.632
Chen Tai,Huarong Liu,Yuan Hu
Hydrogen is a very promising green energy alternative to fossil fuel owing to both environmental friendliness and high-energy nature; however, improving the hydrogen production efficiency of photocatalysts under visible light has remained a challenge. Herein, CdS/Pt/MIL-125 nanocomposite has been fabricated using γ-ray irradiation, where Pt and CdS nanoparticles with clean surfaces are well dispersed inside and on the surface of MIL-125, respectively, which greatly promotes effective space separation of photogenerated carriers and thus improves the visible-light catalytic activity. The hydrogen generation rate of CdS/Pt/MIL-125 nanocomposite is found up to 6783.5 μmol/(g·h) under visible-light illumination, which is 7.3 times that of CdS/MIL-125 without Pt as electron trap reservoirs and 4.4 times that of Pt/CdS/MIL-125 without effective spatial separation between CdS and Pt. The reason is attributed to the synergy of ternary CdS/Pt/MIL-125 with a unique ordered mesoporous structure that may widen the absorption range of the light, improve the efficiency of light harvesting, facilitate mass transfer, prevent the aggregation of CdS and Pt nanoparticles, suppress the electron–hole (e–h) pair recombination, and provide more active sites. Moreover, the loading amount of Pt or CdS nanoparticles also affects the activity of CdS/Pt/MIL-125 nanocomposite for visible-light catalytic H2 evolution. In view of the extensive use of γ-ray irradiation in industry, this research presents a rational route to the fabrication of novel hybrid photocatalysts for improved visible-light catalytic hydrogen evolution.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xiaran Su,Yuming Dong,Yongfa Zhu,Haifeng Shi
Polyethylene terephthalate plastic is widely used and poses challenges in degradation, highlighting the importance of finding efficient degradation methods. In this study, MIL-125-NH 2 /BNQDs composites were synthesized to degrade polyethylene terephthalate plastic in the peroxymonosulfate-activated persistent photocatalysis system. The results showed that MIL-125-NH 2 /2BNQDs exhibited the best degradation effect on polyethylene terephthalate plastic activated by peroxymonosulfate under light conditions, with a degradation efficiency of 95.71 % achieved by adding 3 mM peroxymonosulfate, which was 3.01 times that of MIL-125-NH 2 alone. Furthermore, all composite samples retained persistent catalytic activity under dark conditions after light irradiation. After visible light irradiation, the polyethylene terephthalate degradation efficiency achieved 90.23 % when MIL-125-NH 2 /2BNQDs activated by peroxymonosulfate were used under dark conditions. The mechanism of action of reactive radicals in the polyethylene terephthalate degradation process was revealed by scavenger experiments. In-situ X-ray photoelectron spectroscopy analysis demonstrated that MIL-125-NH 2 /2BNQDs induce Ti 4+ to Ti 3+ transition through electron transfer, resulting in higher efficiency of peroxymonosulfate activation. The composites achieve improved electron storage capacity and enhanced peroxymonosulfate activation efficiency. Furthermore, the alteration of valence in transition metals (from Ti 4+ to Ti 3+ ) triggers photochromism, which amplifies the ability to absorb light. This study provides new insights for the development of novel photocatalysts for environmentally friendly degradation of polyethylene terephthalate plastics, contributing to the removal of plastic waste and the promotion of resource sustainability.
研究领域:
环境科学
·
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2023
·Vol. 170
·期 12
·120504
·
IF 3.9
Zhenyu Fu,Yuhan Li,Lirong Huang,Weiya Zhang,Ling Weng
Lithium metal batteries are considered promising contenders for the next generation of high energy density batteries. However, lithium metal anode with inhomogeneous lithium deposition in liquid electrolyte causes the uncontrolled growth of lithium dendrites. Owing to the high dielectric constant, thermal stability and electromechanical stability of polyvinylidene fluoride, we design a novel gel polymer electrolyte consisting of porous polyvinylidene fluoride polymer matrix, liquid electrolyte, ethylene carbonate and MIL-125 (Ti) (Ti8O8(OH)4(BDC)6, BDC = 1,4-benzene dicarboxylate) for facilitating Li+ transfer and alleviating the growth of lithium dendrites. The high dielectric constant environment facilitates the dissociation of Li+, and the porous polymer matrix structure accommodates more Li+ for fast transfer. Ethylene carbonate reduces the crystallinity of the polymer matrix and improves the ionic conductivity. MIL-125 (Ti) nanoparticles with surface area and uniform micropores improve toughness for enhancing mechanical property, and synergistically promote the Li+ transfer for building stable interfacial phase to alleviate the growth of Li dendrites. Therefore, the gel polymer electrolyte has high ionic conductivity of ∼1.50 × 10−3 S cm−1 at 25 °C, and quasi-solid-state Li/LiFePO4 battery has high discharge capacity of 153.5 mAh g−1 after 250 cycles at 25 °C and 0.3 C.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）