CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Xiaoqiang Wang,Yue Liu,Zhongbiao Wu
In this paper, the Cu-Ce based catalyst using NbOPO 4 (Nb-P) as support was firstly employed for selective catalytic reduction (SCR) of NO by NH 3 . The experimental results had illustrated that such catalyst exhibited well SCR activity and N 2 selectivity within a wide temperature range of 200–450 °C. These superior performances could be mainly attributed to its improved textural properties and strong acidity derived from NbOPO 4 support. More importantly, the sulfur tolerance of the NbOPO 4 supported Cu-Ce sample was found greatly improved compared to TiO 2 and Ti-Nb supported samples, where above 80% SCR activity of Cu-Ce/Nb-P sample was obtained at 250 °C after 10 h reaction running in the presence of 100 ppm SO 2 . This fact was the result of the enhanced acidity and the strong interactions between Cu-Ce oxides and NbOPO 4 support, which could prevent the surface oxygen species from sulfation by SO 2 . As such, these oxygen species strongly associated with NbOPO 4 support still could activate adsorbed NH 3 to fulfill the SCR reaction cycle, leading to its better sulfur resistance. The work would provide some enlightenments to the development of NH 3 -SCR catalysts with high sulfur resistance at medium-high temperature.
研究领域:
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 5
·2586-2592
·
IF 2.936
Boyang Xu,Youlin Liu,Yuesong Shen,Shemin Zhu
A facile method is to prepare novel CeMoxOy-clay hybrid catalysts with layered structures by using organic cation modified clay as support. During the preparation process, cerium cations and molybdate anions are easily adsorbed and impregnated into the interlamellar space of the organoclay, and after calcination they undergo transformation to highly dispersed CeMoxOy nanoparticles within the interlamellar space of the clay. As expected, the prepared CeMo0.15Ox-OC-T catalysts with layered structures had high selective catalytic reduction (SCR) activity such as high NOx conversion of >90% in the wide temperature range of 220–420 °C. Meanwhile, they also exhibit high stability and tolerance to water vapor (5 vol%) and SO2 (200 ppm), demonstrating that these novel catalysts could serve as a good alternative for NH3-SCR in practical application.
研究领域:
催化化学
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF PHYSICS D-APPLIED PHYSICS
·
2023
·Vol. 56
·期 49
·495103
·
IF 3.4
Yujiao Ma,Yuzhou Sun,Zihan Zhang,Haokai Zhao,Haifeng Gao,Qing Zhou,Wenbo Li,Xiaoyun Teng,Chao Gao,Wei Yu
In this paper, the open-circuit voltages (VOC) of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells were improved by soaking the CZTSSe films in Cd/NH3 solutions before the deposition of buffer layers. The effects of Cd/NH3 soaking on the properties of CZTSSe films and solar cells were investigated in depth. We found Cd/NH3 soaking can promote downward band bending of the CZTSSe layer at the surface region. In addition, the Cd/NH3 soaking can eliminate the deep level acceptor in CZTSSe and decrease the density of the defects at the absorber/buffer interface. These effects can significantly reduce the carrier recombination in the depletion region of CZTSSe solar cells. As a result, the VOC of CZTSSe solar cells were increased from ∼460 mV to ∼480 mV, the efficiency of the best CZTSSe solar cell was increased from 10.2% to 11.6% by the Cd/NH3 soaking process.
研究领域:
材料科学
·
光伏技术
·
半导体物理
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2019
·Vol. 12
·期 22
·3654
·
IF 2.972
Mingxuan Ma,Xiaoyu Ma,Suping Cui,Tingting Liu,Yingliang Tian,Yali Wang
A series of MCM-41 molecular sieves with different molar ratio of template to silicon were synthesized through hydrothermal synthesis method by using cetyltrimethylammonium bromide (CTAB) as the template, diatomite as the silicon source. By using impregnation method, the Mn-Ce/MCM-41 SCR molecular sieve-based catalysts were prepared. The results observed that when the molar ratio of template to silicon was 0.2:1, the MCM-41 as catalyst carrier has the highest surface area and largest pore volume, it also presented typically ordered hexagonal arrays of uniform channels. The denitration catalytic material based on this carrier has a high number of Lewis acidic sites, and the denitration efficiency can reach more than 93%.
研究领域:
环境催化
·
材料科学
·
化学工程
·
大气污染控制
·
无机多孔材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Meinan Wan,Baoshun Liu,Shuo Wang,Lingting Hu,Youjia He,Haizheng Tao,Xiujian Zhao
Monoclinic (M1) VO 2 film has potential applications in thermochromic modulators owing to the particular optical performance caused by phase transition. However, its controllable preparation is very difficult due to the multivalence of V element. Here, we studied a sol-gel process followed by annealing in a closed vaccum furnace containing NH 3 atmosphere, and discussed the formation mechanism of M1-phase VO 2 films. Thermochromic M1-phase VO 2 thin films can be fabricated under the base pressure of 600–2000 Pa with the annealing temperature at 470–590 °C for more than 0.5 h, and the optimal condition is at 1000–2000 Pa and 500–530 °C for 0.5 h, by synthetically considering their luminous transmittance ( T lum ), solar modulation efficiency ( ΔT sol ), and modulation efficiency at 2000 nm ( ΔT 2000nm ). The M1-phase VO 2 thin film generally exhibits the optical properties with T lum ≈ 39–41%, ΔT sol ≈ 7.7% and ΔT 2000nm ≈ 50%. A higher base pressure introduces more oxygen to remove polymers in precursors, enhancing the transparency of films. Improving the temperature or the duration promotes the growth of VO 2 crystallite with limits. However, inappropriate base pressure, temperature or duration will reduce or oxidize the VO 2 films, resulting in the inferior thermochromic properties. According to thermal and XPS analysis , NH 3 can act as a reductant to prevent oxidation of VO 2 films during the annealing process. This convenient heat treatment method to synthesize M1-VO 2 films may provide a useful and practical technique for the production of VO 2 -based smart window and optical devices.
研究领域:
材料科学
·
光学工程
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Shanshan Liu,Hao Wang,Ying Wei,Runduo Zhang,Sebastien Royer
ZrO2 supports, with diverse morphologies (hollow sphere, star, rod, mesoporous), were produced using hydrothermal and evaporation-induced self-assembly methods. Zirconia-supported vanadium oxide catalysts were prepared by wet impregnation and used for the low-temperature selective catalytic reduction (SCR) of NO with ammonia. Characterization of catalysts includes N2 physisorption, elementary analysis, X-ray diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, temperature-programmed reduction by H2, and temperature-programmed desorption of NH3. Significant differences in terms of activity are measured. 3 wt % V2O5 supported on mesoporous ZrO2 (V/MZ) presents excellent N2 yields (>90%, in the 200–400 °C interval), with a wide operating temperature window (NO conversion > 95%, in the 225–425 °C interval), and less interesting performances were obtained when vanadium oxide is supported over stars, hollow spheres, and rods. Surface characterization showed a content of tetravalent vanadium ion, when supported, decreasing in the order of mesoporous > hollow sphere > star > rod. This order is in perfect agreement with the order of performance of the catalyst in the NH3-SCR reaction. The impact of tetravalent ion’s presence on the surface is confirmed by diffuse reflectance infrared Fourier transform spectroscopy analysis, Brønsted acid sites generated on the surface, and the V4+-OH species involved in the reaction. The production of more important nitrite species over the tetragonal supported vanadium oxide catalyst could be another reason for the excellent NH3-SCR performance displayed by the V/MZ catalyst. When supported over monoclinic zirconia, like vanadium oxide over star-type morphology, the adsorbed NH3 species (NH4+ and coordinated NH3) reacted with NOx adsorption species (nitrate) to form ammonium nitrate. Ammonium nitrate can be decomposed to N2 and N2O (or NO2). Thus, NO conversion curves and N2 yield curves over tetragonal zirconia (MZ) at lower temperature were ahead of those over V/star ZrO2 because of the higher V4+ surface content and more active B acid sites associated with an easy formation of the nitrito intermediate.
研究领域:
催化化学
·
环境科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
AICHE JOURNAL
·
2019
·Vol. 65
·期 10
·e16684
·
IF 3.463
Lei Song,Kui Ma,Wen Tian,Junyi Ji,Changjun Liu,Siyang Tang,Wei Jiang,Hairong Yue,Bin Liang
A novel FeTiSO x catalyst prepared by a simple hydrolysis coprecipitation method was used for the selective catalytic reduction (SCR) of NO x with NH 3 , which exhibited high catalytic activity (NO x conversion of >97% and N 2 selectivity of >95%) and tolerance for both H 2 O and SO 2 at a broad temperature window of ~325–475°C. The characterization results showed that the formation of Fe–O–Ti and Fe–O–S species could significantly enhance the acidic sites of the catalyst, which play an important role in NH 3 absorption and their catalytic activity. The Fe 3+ ions in the bulk anatase TiO 2 could significantly enhance the redox properties for the SCR reaction and suppress the side reaction of NH 3 oxidation to NO or N 2 O. In addition, the reaction mechanism was discussed based on in situ diffuse reflectance infrared Fourier transform spectroscopy measurements and kinetic investigation, indicating that the reaction was dominated by the Eley–Rideal mechanism over the FeTiSO x catalyst.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2021
·
IF 7.92
Yue Ma,Songqi Cheng,Xiaodong Wu,Tongxi Ma,Liping Liu,Baofang Jin,Minghan Liu,Jianbo Liu,Rui Ran,Zhichun Si,Duan Weng
To improve the hydrothermal durability of Cu-SSZ-13 selective catalytic reduction (SCR) catalyst, a thin Al 2 O 3 modification layer was coated on the external surface of Cu-SSZ-13 by a chemical liquid deposition (CLD) method. The high-temperature SCR activity of the Al-modified Cu-SSZ-13 can be maintained upon 750–800 °C hydrothermal aging, and over-oxidation of NH 3 is largely inhibited. Based on H 2 -TPR and EPR results, it is revealed that CuAl 2 O 4 -like species forms upon Al modification and converts further to CuAlO 2 -like species during aging, while the accumulation of CuO-like species is inhibited. The high affinity of Al-containing species ( i.e. , Al 2 O 3 and CuAl 2 O 4 -like species) with Cu(OH) 2 is suggested by DFT calculations, indicating that Cu(OH) 2 detached from ion-exchange sites are captured by Al to form CuAlO 2 -like species instead of CuO-like species. The passivation of detached Cu species by coated Al leads to somewhat weakened low-temperature SCR activity, but successfully preserves the high-temperature SCR performance upon aging, which can be applied to high-temperature SCR scenarios.
研究领域:
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Han Jiang,Bin Guan,Xuesong Peng,Reggie Zhan,He Lin,Zhen Huang
This study focuses on investigating the influence of ion-exchange method (ION-F and ION-A) and one-pot method (ONE-F and ONE-A) on catalytic properties and hydrothermal stability of Cu/SSZ-13. It was found that ONE-F catalyst showed better SCR activity, especially at low temperature range below 400 °C. After hydrothermal aging, ION-A exhibited higher low temperature efficiency than ONE-A. The effect of synthesis method on the physicochemical structure, acidity intensity, and Cu species migration or transformation of the fresh and aged Cu/SSZ-13 catalysts were comprehensively characterized by NH 3 -TPO, H 2 -TPR, NH 3 -TPD, ICP, XRF, BET, XRD, SEM, and TEM. ONE-F has more isolated Cu 2+ sites, higher ratio of active sites Cu 2+ -2Z/[Cu(OH)] + -Z, more Lewis acid sites, and smaller particle size than ION-F. However, hydrothermal aging had severe effect on Cu/SSZ-13 prepared by one-pot method, leading to particle aggregation and decrease of active copper sites. According to NH 3 -SCR kinetic studies, smaller particle size and more uniformly distributed active sites over ONE-F resulted in less effect of pore diffusion limitation. Furthermore, in situ DRIFTS results indicated that more monodentate nitrates adsorbed sites and Lewis acid sites existed in ONE-F. On the other hand, monodentate nitrates were identified to be the most active nitrate species, and Lewis acid sites were ascertained to be more active than Brønsted acid sites. Therefore, ONE-F showed more excellent SCR performance than ION-F. However, hydrothermal aging resulted in loss of majority of nitrate adsorbed sites and acid sites over catalyst prepared by one-pot method, leading to lower SCR performance. In conclusion, Cu/SSZ-13 prepared by ion-exchange method has higher hydrothermal stability, however, fresh Cu/SSZ-13 prepared by one-pot method has excellent catalytic properties.
研究领域:
催化材料
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2021
·Vol. 11
·期 15
·5125-5134
·
IF 6.119
Yanke Yu,Xianfang Yi,Jiali Zhang,Zhaojian Tong,Changwei Chen,Mudi Ma,Chi He,Jinxiu Wang,Jinsheng Chen,Bingbing Chen
Non-vanadium-based catalysts with high SO2 tolerance are still interesting in selective catalytic reduction of NO by NH3 (NH3-SCR) and SO2 adsorption is the foremost step for the deactivation of catalysts. In order to alleviate the adsorption of SO2, we fabricated a series of rhenium (Re; without stable sulfate) supported TiO2 catalysts and studied their SO2 tolerance for the first time. Owing to suitable surface acidity and reducibility, ReOx/TiO2 catalysts exhibited satisfactory activity in a wide temperature range of 250–350 °C. As expected, experimental results and DFT calculations indicated that SO2 adsorption on ReOx/TiO2 catalysts was rather weak, thus the catalysts performed excellent SO2 tolerance in the NH3-SCR reaction. Moreover, in situ DRIFTS indicated that the NH3-SCR reaction on ReOx/TiO2 catalysts followed the Eley–Rideal mechanism and SO2 had little effect on the reaction mechanism. Our findings should provide new insights into the development of SCR catalysts with high SO2 tolerance.
研究领域:
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Yanli Zhang,Jian Li,Jianyu Cai,Shuangye Li,Xing Fan,Liyun Song,Ruixue Guo,Jiasheng Liu
In this study, a series of γ-Fe 2 O 3 -modified V 2 O 5 -MoO 3 /TiO 2 (VMT) catalysts was prepared by wet impregnation method. The γ-Fe 2 O 3 -modified catalysts exhibited excellent catalytic performance, and 1.25 wt% γ-Fe 2 O 3 content improved the deNO x efficiency at 150 °C from 54% (unmodified VMT catalyst) to 84% (modified catalyst). BET, XRD, XPS, NH 3 -TPD, H 2 -TPR, and in situ DRIFTs were employed to characterize the physicochemical properties and reaction mechanisms of the catalysts. The introduction of γ-Fe 2 O 3 increased the V 5+ /V 4+ ratio, surface chemisorbed oxygen content, redox ability, and a number of acid sites in the prepared catalysts. XPS confirmed the addition of γ-Fe 2 O 3 introduced new charge transfer pathways (Fe 3+ /Fe 2+ ↔ V 5+ /V 4+ ). In situ DRIFTs suggested that the addition of γ-Fe 2 O 3 to the catalyst significantly increased the adsorption capacity of catalyst for NH 3 and NO x , while also exerting a strong activating effect on the adsorbed NH 3 . Furthermore, selective catalytic reduction over the VMT and 5PEG@1.25Fe-VMT catalysts followed the Eley-Rideal (E-R) mechanism. At temperatures above 200 °C, the 5PEG@1.25Fe-VMT catalyst also followed the Langmuir-Hinshelwood (L-H) mechanism.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Yangfan Chen,Hongyan Yan,Wenxin Teng,Jiangling Li,Weizao Liu,Shan Ren,Jian Yang,Qingcai Liu
NH 3 -SCR technology with commercialized V 2 O 5 -WO 3 (MoO 3 )/TiO 2 catalysts has become the most efficient technology for the removal of NO x from coal-fired power plants. However, the weaknesses of V 2 O 5 -WO 3 (MoO 3 )/TiO 2 catalysts such as the biotoxicity of vanadium species and high cost restrict their increased applicability. Fe 2 O 3 -based NH 3 -SCR catalysts show potential in placing traditional catalysts due to their good N 2 selectivity, excellent environmentally friendly performance, high thermal stability, and low cost. In this work, low cost Fe 2 O 3 -containing solid waste was exploited as the base material for NH 3 -SCR catalyst preparing. Moreover, bulk MoO 3 and MoO 3-x nanosheets decorated Fe 2 O 3 composite NH 3 -SCR catalysts were synthesized and both revealed conspicuously improved NO x removal efficiency compared with bare-Fe 2 O 3 catalyst. However, the N 2 selectivity of these two catalysts showed significant differences. Therefore, comprehensive characterizations, NH 3 oxidation experiments, and in-situ diffusion Fourier transform infrared spectroscopy (DRIFTS) experiments were performed to determine the N 2 O formation pathways of the above two catalysts. The redox properties were highly related to the N 2 O generated from NH 3 oxidation. Moreover, the huge difference in NH 3 and NO adsorption ability led to disparate reaction mechanisms over the two catalysts. This new understanding of the N 2 O formation mechanism has the potential to guide the rational design of improved NH 3 -SCR catalysts suffering from low N 2 selectivity.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）