Science China-Technological Sciences
·
2026
·Vol. 69
·期 9
·1920106
·
IF 5.1
Li Haorong,Zhang Huixin,Wu Xinlong,Niu Xiaojuan,Hong Wenpeng,Li Haoran
Solar-driven interfacial evaporation, with its zero carbon emissions, low cost, and off-grid characteristics, has become a core solution for seawater desalination and wastewater purification. However, its practical application is still limited by the insufficient freshwater productivity due to the low vapor condensation rate. This study introduces a copper foam (CF)-based bidirectional solar water production (CF-BSWP) device. Utilizing the interconnected networks of CF, the available surface area and nucleation sites for vapor condensation are increased. Furthermore, the CF undergoes hydrophobic modification to suppress the formation of a liquid film, which constitutes a major barrier for continuous vapor condensation. Under 1 sun illumination, the hydrophobic CF-BSWP device achieves a water productivity of 1.20 kg m −2 h −1 and a solar-water efficiency of 80%. Importantly, a 10-hour real-world operation demonstrates an outstanding water yield of 11.07 kg m −2 , suggesting sustainable water production under natural sunlight and fluctuating weather conditions. This work provides an effective and viable solution to harvest the vapor generated in solar-driven interfacial evaporation devices.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·123882
·
IF 7.5
Weilong Wu,Chao Li,Yi Wang,Xun Hu
Pyrolysis and activation are common methods for preparing biochar adsorbents, but these treatments often increase porosity while destroying oxygen-containing functional groups that are important for pollutant binding. In this work, a non-carbonized strategy was developed to regulate biomass surface chemistry using camphor wood. Instead of thermal treatment, lignin was removed and the material was modified with tannic acid (TA) and Fe 3 + to construct adsorption sites. The degreasing–oxidation process removed lignin and hemicellulose, exposing cellulose surfaces rich in -OH. TA and Fe 3+ further introduced polar and coordination-active sites. Structural characterization showed that lignin removal triggered hydrogen‑bond rearrangement accompanied by pore contraction, which critically governed the subsequent adsorption behavior. These interfacial changes strongly affected adsorption behavior. Raw camphor showed almost no adsorption toward methylene blue because of the inaccessible functional groups. Fe-modified samples displayed limited adsorption due to site occupation by coordination. Oxidized camphor exhibited improved adsorption because more −OH and −COOH groups were exposed. TA modification alone produced only slight enhancement because of pore restriction and hydrogen-bond competition. In contrast, TA/Fe-modified oxidized camphor achieved the highest adsorption capacity of 312.07 mg/g, higher than oxidized camphor (164.09 mg/g). The improvement mainly resulted from the synergistic effect of exposed -OH, -COOH, and partially coordinated Fe 3+ sites. The material also maintained more than 80% of its initial adsorption capacity after five cycles. Overall, this work shows that adsorption enhancement mainly comes from interfacial reconstruction rather than pore development, providing a simple route for preparing biomass-based functional adsorbents.
✓ 已验证
产品关联
DOI
高影响因子
JOM
·
2026
·
IF 2.3
Deng Chuheng,Qin Yufeng,Shen Yi,Rao Longshi,Wang Shuangxi
Metallized ceramic substrates are essential for power electronics, offering superior thermal and electrical conductivity. However, traditional metallization techniques, such as thick printed copper (TPC), face significant challenges, including weak bonding strength, high sintering temperatures, and complications associated with glass frit, which ultimately compromise device reliability and performance. To address these issues, this study presents an efficient method for fabricating high-performance copper (Cu) films on Al 2 O 3 ceramic substrates using low-temperature, pressureless sintering. By incorporating a magnetron-sputtered copper interlayer combined with printed copper paste, we eliminate the need for glass frit, a conventional component that often introduces defects. Through careful optimization of copper powder synthesis and paste formulation, we achieved dense, low-porosity Cu films sintered at just 300°C, which demonstrate exceptional electrical conductivity (1.7 × 10 7 S m −1 ) and shear strength (31.5 MPa). The sputtered copper interlayer significantly enhances the adhesion between the copper film and the ceramic substrate, minimizing delamination and improving mechanical integrity when compared to traditional sintering methods. This approach addresses key challenges in power device packaging, providing a cost-effective, reliable solution for low-temperature, high-performance interconnections. The results have wide-reaching implications for advancing electronic packaging, especially in power electronics, by enabling durable, efficient, and scalable manufacturing processes.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Haijun Wu,Shenggui Ma,Dianhang Wei,Yaolin Wang,Quanwei Lv,Ziheng Jin,Xinrui Wang,Xin Tu,Xia Jiang
A strategy for plasma-coupled O v -rich catalytic hydrogen production is proposed. • The catalyst shows high activity and universality for hydrogen production. • Synergistic cascade from plasma dissociation to catalytic surface reforming. • The key mechanism of “hydrogen promotion and anti-coking” were revealed. Hydrogen production from plastics contributes to the circular economy by enabling both waste valorisation and green energy generation. Integrated pyrolysis-plasma catalytic technology offers notable advantages in improving hydrogen production, but it still faces challenges such as catalyst coking and limited understanding of the reaction mechanisms. This study proposes a water vapor plasma-coupled oxygen vacancy-rich (O v -rich) catalytic strategy to systematically investigate the improved hydrogen production from plastics over an anti-coking catalyst. The results show that the O v -rich catalyst exhibits outstanding hydrogen production activity, strong synergistic effect, and universality in the non-thermal plasma catalytic (NTP-C) reforming reaction of mixed model compounds in plastic pyrolysis oil. Crucially, its practical effectiveness was successfully validated in the NTP-C reforming of polyethylene (PE)/polypropylene (PP) pyrolysis oils. Moreover, the O v -rich catalysts significantly inhibited coking and maintained good stability for 1800 min in a multi-component mixed system. The mechanisms of hydrogen production and coking inhibition were revealed via Density Functional Theory (DFT) calculations, in situ plasma-coupled Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), and Optical Emission Spectroscopy (OES). A synergistic reaction pathway, coupling plasma gas-phase dissociation with catalytic surface reforming, was identified as a key mechanism for enhancing hydrogen yield in plasma-catalytic systems. The study offers valuable insights for advancing plasma-assisted hydrogen production technologies. Download: Download high-res image (150KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
FirePhysChem
·
2026
·
IF 5.1
Yuqiao Liu,Yubei Lin,Rongyu Zhang,Juan Zhu,Yongjun Ma
In an effort to address the inherent trade-off between electrostatic safety and combustion performance in solid propellants, a series of CuCr₂O₄/polypyrrole (PPy) composite catalysts with tunable microstructures was designed in this study. CuCr₂O₄/PPy composite catalysts with CuCr₂O₄ loadings of 10, 30, and 50 wt% were synthesized via the hydrothermal method and in-situ polymerization. The microstructural evolution was characterized by electron microscopy, X-ray diffraction, and N₂ physisorption. These composites were incorporated at 2 wt% into GATo propellants, a Composite Modified Double-Base (CMDB) propellant, and their effects on electrical resistivity, thermal decomposition, burning rate, and sensitivities were systematically evaluated. The specific surface area of the composites decreased progressively from 52.7 m²/g (10 wt% CuCr₂O₄, 1#) to 38.1 m²/g (50 wt% CuCr₂O₄, 3#), confirming a microstructural transition from a continuous PPy network to agglomerated CuCr₂O₄ particles. The composite with low CuCr₂O₄ loading (10 wt%) imparted the lowest electrical resistivity and the most significant safety enhancement, while slightly improving the combustion performance of the GATo propellant: the negative electrostatic sensitivity threshold increased by 38% (from 1.78 J to 2.45 J), and the impact sensitivity threshold improved by 150% (from 4.0 J to 10.0 J). In contrast, the composite with high CuCr₂O₄ loading (50 wt%) achieved the highest combustion performance while reducing the sensitivity of the GATo propellant: the burning rate increased by 44% (from 3.79 to 5.47 mm/s), and the exothermic peak temperature decreased by 5.3°C.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Mingchen Yi,Haoran Chen,Zhuoni Liu,Jing Yuan,Tianxiang Yin
Deep eutectic solvents (DESs) based on matrine and caprylic acid were developed. • Structure and phase behavior of DESs were determined. • DESs displayed good extraction efficiency of curcuminoids from Curcuma longa . • The extract-based biofilm showed great anti-bacterial and anti-oxidant ability. • The prepared biofilm was successfully applied on strawberry preservation. Deep eutectic solvents (DESs) from matrine and caprylic acid were constructed herein and used to extract curcuminoids from Curcuma longa . The DESs displayed excellent extraction efficiency that can be comparable to those with commonly used harmful organic solvents. The curcuminoids possessed high stability in the extract, which provided good anti-oxidant ability. Moreover, the extract was further used without any separation or purification process to develop biofilm that showed excellent anti-bacterial ability against E. coli and S. aureus , which was resulted from both components of DES. The prepared biofilm was thus successfully applied on strawberry preservation, where much better texture and appearance and lower weight loss of strawberry were observed as compared to those without preservation. The work provides a simple strategy to prepare bio-active film with the extract from natural herbs by bio-active ingredients based DES that acted as both extractant and bioactivity enhancer. Download: Download high-res image (133KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Zhenlong Liu,Yu Liu,Jiayuan Zhang,Ruiyan Zheng,Fangfang Xing,Zunyuan Xie,Guofang Zhang
Nano-sized Co 3 O 4 was stepwise confined into N-doped hollow carbon nanospheres. • Yolk-shell Co 3 O 4 @NHCs exhibits the best catalytic activity for AP pyrolysis. • In situ formed Co 3 O 4 -graphene composite accelerates the deep oxidation of ammonia. • A possible catalytic mechanism for AP combustion was systematically proposed. Transition metal oxides are widely used to catalyze the decomposition of ammonium perchlorate (AP) because of their reversible multivalent redox behavior. However, their catalytic performance is often constrained by particle aggregation and insufficient exposure of active sites. We encapsulate the precursors within nitrogen-rich hollow carbon nanospheres (NHCs) to synthesize core–shell MCo 2 O 4 @NHCs (M = Fe, Co, Ni, Cu, Zn, V, Cr, Mn) composites via our previously reported stepwise confined strategy. Among these, 5 wt% Co 3 O 4 @NHCs + AP exhibits the best catalytic activity, lowering the high-temperature decomposition peak of AP by 151 °C and increasing heat release by 2.13 times compared to pure AP. Kinetic analysis shows that Co 3 O 4 @NHCs significantly reduces the activation energy under the A2 model. Electrochemical tests confirm its superior electron-transfer capability, which facilitates AP decomposition. TG-FTIR-MS/GC reveals that Co 3 O 4 @NHCs accelerates NH 3 oxidation. DFT calculations indicate that the Co 3 O 4 @NHCs surface exhibits the strongest adsorption for both NH 3 and O 2 , promoting NH 3 oxidation by surface active oxygen species to generate NO x . Based on these results, a rational catalytic pathway for AP decomposition is proposed. This work validates the “spatial confinement + interface regulation” strategy and offers new insights into the design of efficient burning rate catalysts. Download: Download high-res image (173KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Peiye Hua,Jiahao Li,Zerui Yu,Ye Song,Dujuan Wu,Meiling Chen,Jeonghun Kim,Song Li,Miao Zou,Junhui Yang,Wenkai Zhu
Nano-SiO 2 aerogel enhanced UV coatings for woodenware (UVCW) was studied. • Enhanced UVCW have high infrared reflectance in the atmospheric window. • Enhanced UVCW have outstanding radiative cooling performance. • Water resistance, adhesion, and abrasion resistance of UVCW was improved. Ultraviolet (UV) coatings for woodenware (UVCW) are widely applied in home furnishings, building materials, and interior decoration because of their rapid curing, high hardness, and low volatile organic compound (VOC) emissions. However, conventional UVCW lack passive daytime radiative cooling capability, restricting their use in energy-efficient applications. Herein, this work enhances the daytime radiative cooling performance of UVCW by incorporating nano-SiO 2 aerogel via direct blending method. The physicochemical properties and outdoor daytime radiative cooling effects of the UVCW before and after nano-SiO 2 aerogel reinforcement were comprehensively evaluated. Unlike conventional UVCW or SiO 2 nanoparticle coatings, this approach achieves an ultrahigh infrared emissivity of 94.95% in the 8–13 μm atmospheric window without complex multilayer structures. As a result, the nano‑SiO 2 aerogel reinforced UVCW realizes an average daytime temperature reduction of 6.4 °C outdoors, with a maximum cooling reduction of 10.4°C. This study not only demonstrates the potential for imparting passive daytime radiative cooling functionality to wood‑based materials but also provides a facile, scalable, and energy‑efficient strategy for developing advanced radiative cooling coatings. Download: Download high-res image (172KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN SOLID STATE CHEMISTRY
·
2026
·
IF 9.7
Mengping Wang,Shiyu Wang,Xinxin Liu,Zhenyi Yu,Guangjiu Zhao
Green antisolvents and ligands synergistically direct perovskite phase evolution. • Spectroscopic analyses reveal solvent-dependent ligand dissociation mechanisms. • Distinct phases enable antibacterial and dynamic anti-counterfeiting applications. In this work, we propose a ligand–antisolvent synergistic regulation strategy to synthesize Cs–Pb–Br materials with dual antibacterial and encryption functions. An amphiphilic ligand derived from 5-bromovaleric acid (5-BVA) and oleamide (OAm) is employed with two green antisolvents (water and ethanol). The use of water as an antisolvent yields high-purity CsPbBr 3 quantum dots (QDs) with water stability exceeding 50 days. These QDs exhibit potent antibacterial activity through electrostatic interactions with bacterial cell membranes achieving up to 99.8% inhibition at a low concentration of 120 μg/ml. In contrast, ethanol as the antisolvent leads to a mixed CsPbBr 3 /CsPb 2 Br 5 phase. This mixed phase exhibits water-triggered fluorescence activation originating from CsPbBr 3 recrystallization alongside a thermal quenching effect that enables reversible on–off fluorescence switching upon cooling–heating cycles. This water-induced fluorescence activation effect combined with reversible thermal quenching properties enables multi-level encryption. Ultimately this ligand-antisolvent synergistic regulation strategy not only offers theoretical guidance for the rational and tailored design of multifunctional perovskites but also establishes a foundation for their practical applications in complex optoelectronic and biological environments.
✓ 已验证
产品关联
DOI
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2026
·
IF 11.8
Bo-Han Kou,Cheng Yuan,Zi-Mo Han,Ao Xiao,Yu-Ting Huang,Wei-Wei Zhao,Jing-Juan Xu
Photoelectrochemistry (PEC) presents an emerging paradigm for aqueous neurosynaptic emulation. Here, a bioinspired PEC synapse integrating optical perception and biosensing of real neurotransmitter glutamate (Glu) is devised for visuomorphic in-sensor computing. Short-term and spiking-dependent plasticity with Glu-tunable excitatory and inhibitory signals are realized, making possible Glu-tunable convolutional kernel for in-sensor preprocessing and convolutional neural network. This work achieves PEC in-sensor processing and real neurotransmitter-mediated visuomorphic computing for the first time.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Yujie Fan,Jun Xu,Jing Liu,Luping Feng,Fangrong Zhou,Haoran Li,Jianghong Wang,Enjun Chen,Lixiang Zhang,Hua Wang
S-scheme In 2 O 3 /g-C 3 N 4 heterostructure was prepared for tetracycline hydrochloride (TCH) degradation through in-situ growth of In 2 O 3 nanorods (NRs) onto g-C 3 N 4 nanosheets (NSs) via high-temperature thermal polymerization method. The results show that resulted heterostructure could exhibit varying photocatalytic behaviors under simulated sunlight depending on In 2 O 3 loading ratios. The one with loading ratio of In 2 O 3 to g-C 3 N 4 at 10 wt% could display the best photocatalytic performance with efficiency up to 93.4% within 60 min, which are 2.61-fold and 1.17-fold higher than In 2 O 3 and g-C 3 N 4 . Herein, In 2 O 3 and g-C 3 N 4 components with matched band structures could individually serve as holes quencher and electrons donor to prolong carrier lifetime through in-situ formed interfacial electrostatic field due to their different Fermi levels. An S-scheme heterostructure could thus be engineered to facilitate charge carrier migration while enhancing redox capabilities, ultimately yielding superior photocatalytic performance. Moreover, the developed heterostructure could present superior structure and activity stability. Crucially, it was noticed that • O 2 – and • OH radicals played a major role in TCH degradation and the possible degradation and mineralization pathways as well as toxicity of by-products were explored based on identified intermediate products. These findings underscore that In 2 O 3 /g-C 3 N 4 heterostructure could hold substantial potential for practical environmental remediation applications.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Haiyan Cao,Bin Yang,Wenfei Dong,Wenbing Shi
Background The accurate detection of 2,3,5,6-tetramethylpyrazine (TMP) in complex matrices is significant for food quality control and biomedical analysis. Despite this need, a dedicated optical sensing platform for TMP has not been reported to date. Results Here, we present a novel ratiometric fluorescent probe based on a Tb–EDTA complex, which introduces a sensing strategy founded on coordination-induced modulation of the ligand-to-metal charge transfer (LMCT) process. Specific coordination of TMP's pyrazine nitrogen atoms to the Tb 3+ center results in a characteristic ratiometric response: quenching of the emission at 548 nm and concomitant enhancement at 650 nm. The probe exhibits excellent analytical performance with a linear range of 0.1―40 μM, a detection limit of 0.038 μM, and high selectivity over structurally similar interferents. Its practical applicability is demonstrated by reliable quantification of TMP in real samples, including sauce-flavor Baijiu, sake, and human urine, with recoveries of 94.54–104.82% and relative standard deviations below 10.57%. Significance This work establishes a pioneering optical sensing approach for TMP detection, providing a valuable analytical tool for flavor assessment in alcoholic beverages and pharmacological monitoring in biological systems.
✓ 已验证
产品关联
DOI
高影响因子