JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Likang Fu,Shixing Wang,Guo Lin,Libo Zhang,Qiming Liu,Ju Fang,Chenhuinan Wei,Gang Liu
A new MOFs adsorbent was prepared by post-functionalization of UiO-66-NH 2 with 2,5-Dimercapto-1,3,4-thiadiazole and utilized to remove the Hg(II) in water selectively. The UiO-66-types were detected by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), Brunauer-Emmett-Teller (BET) and zeta potential instruments. The adsorption properties of the new MOFs adsorbent were investigated by batch experiments. The actual maximum adsorption amount was 670.5 mg/g at the optimal pH of 3. Adsorption kinetic and isotherm models were exceedingly fitted to pseudo-second-order and Langmuir/Dubinin-Radushkevich, respectively. The adsorption process and mode were geared to monolayer and chemisorption, the removal rate was directly proportional to the square of mercury ions concentration. The UiO-66-DMTD adsorbent was easy to be regenerated and the removal rate decreased by only 13.5% after ten consecutive cycles. The results of FTIR, XRD and XPS suggested that the adsorption mechanism lay on the complexation reaction between Hg(II) and thiol/nitrogen-containing groups. Moreover, compared with other competitive metal ions, viz., Zn(II), Co(IV), Ni(II), Cd(II), Mg(II), Fe(III), Ca(II) and Cu(II), the UiO-66-DMTD demonstrated an outstanding selective adsorption for Hg(II). These results manifested that the UiO-66-DMTD was a latent adsorbent for the efficient and selective removal of Hg(II) in wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2016
·
IF 5.31
Hongxu Guo,Dongfang Wang,Jianhua Chen,Wen Weng,Minqiang Huang,Zishan Zheng
A novel metal-organic framework (MOF) material, flake-like NH 2 -MIL-53(Cr), was prepared by a simple reflux method and then characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The as-prepared MOF was found to be an effective material for the selective electrochemical detection of microgram levels of Pb 2+ in aqueous solution. Detection was performed by square wave anodic stripping voltammetry. The NH 2 -MIL-53(Cr)-modified electrode showed excellent selectivity and stability for Pb 2+ detection. The electrochemical properties and applications of the modified electrode were studied. Operational parameters such as pH, deposition potential, and deposition time, were also optimized to detect trace amounts of metal ions. This method offers a new strategy for heavy metal detection using MOF materials.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2017
·
IF 9.446
Baolin Yan,Lijuan Zhang,Zhiyong Tang,Mohammad Al-Mamun,Huijun Zhao,Xintai Su
Engineering metal-organic frameworks (MOFs) into hierarchical structured materials is crucial for providing a viable platform to construct efficient catalysts and broaden their applications in energy conversion and photocatalysis. Here, a simple and efficient solid-state pyrolysis of Ti-MOFs (NH 2 -MIL-125) sacrificial template combined with a photo-reduction process was developed to construct a series of hierarchical TiO 2 decorated with Pd nanoparticles. The hierarchical TiO 2 inherited the well-defined rounded rectangular submicron-tablet from NH 2 -MIL-125 precursor and was constituted of uniform anatase TiO 2 nanoparticles with an average size of 12 nm. Furthermore, the photocatalytic activity for the hydrogen production from water-methanol solution was improved by the optimization of the content of Pd as a cocatalyst, and the maximum was achieved with a Pd loading of 1.5%. The rate of H 2 evolution of 1.5% Pd decorated hierarchical TiO 2 (1.5% Pd/TiO 2 ) reached to 979.7 μmol h −1 and 112.7 μmol h −1 , under UV–vis light and simulated solar light, respectively. This unusual photocatalytic activity may be resulted from the positive synergetic effect of efficient light absorption, promoted separation and migration of photo-induced electron-hole carriers. The work highlights the potential of the MOFs-based hierarchical TiO 2 in the photocatalytic water splitting under solar light.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2024
·
IF 3.2
Shipeng Liao,Muhammad Arif,Xingyue Qian,Guangyu He
The development of hybrid heterostructure photocatalysts with enhanced visible light absorption capacity holds significant importance in environmental remediation. However, the challenge persists in exploiting strong visible-light responsive photocatalysts with both high efficiency and stability. Herein, we successfully synthesized a hybrid Z-scheme heterojunction of Bi 2 O 3 and UiO-66-NH 2 (Bi 2 O 3 /UiO-66-NH 2 ) through a simple hydrothermal route. The visible light photocatalytic performance of Z-scheme Bi 2 O 3 /UiO-66-NH 2 heterojunction is systematically evaluated for persistent antibiotic tetracycline hydrochloride (TC-HCl) both in the clean and real water matrix. All heterojunction catalysts exhibit superior photodegradation capabilities compared to pristine Bi 2 O 3 and UiO-66-NH 2 . The optimal ratio of the two components heterojunction (BUN-150), in particular, demonstrates the highest removal efficiencies for TC-HCl (95 %) within a 90-min timeframe. This remarkable photocatalytic performance is credited to the Z-scheme charge transfer occurring at the interface of Bi 2 O 3 and UiO-66-NH 2 in Bi 2 O 3 /UiO-66-NH 2 heterojunction. The active species experiments and electron paramagnetic resonance analyses are conducted to identify the active reactive species during the TC-HCl degradation (·OH, h + , and ·O 2 − ), and a precise photocatalytic degradation mechanism is explained. Additionally, the photodegradation intermediates of TC-HCl are detected using the HPLC-MS analysis to explain the degradation pathways of TC-HCl. This research paves the way for the development of novel Z-scheme Bi 2 O 3 -based heterojunction catalysts for outstanding photocatalytic applications.
✓ 已验证
产品关联
DOI
高影响因子
Magnetochemistry
·
2024
·Vol. 10
·期 10
·74
·
IF 2.6
Qinqin Hu,Manman Zhang,Jiaoyu Peng,Yaping Dong,Wu Li,Lingzong Meng
In this study, amino-functionalized magnetic particles (iron oxide@SiO2-NH2) with core-shell structures were synthesized and evaluated for rapid boron removal from aqueous solutions. The results showed that the specific surface area of the iron oxide@SiO2-NH2(131.24 m2⋅g−1) increased greatly compared to pure iron oxide (30.98 m2⋅g−1). The adsorption equilibrium was less than 2 h, with an adsorption capacity of 29.76 mg⋅g−1at pH = 6 at 15 °C. The quasi-second-order kinetic model described the boron adsorption process well, and both the Langmuir and Freundlich models were suitable for characterizing the adsorption isotherms. The zeta potential and XPS analysis before and after adsorption revealed that the main adsorption mechanism was the hydrogen bonding formation between the terminal -NH2groups of the adsorbent and the boric acid. In addition, the adsorbent still maintained a high adsorption performance after five adsorption–desorption cycles, which illustrated that the iron oxide@SiO2-NH2may be a potential adsorbent for environmental boron removal treatment.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Bao-Xu Jiang,Shuang-Bao Li,Ting-Ting Xu,Jian Li,Yu-Teng Zhang
Adsorption membranes have become a hot spot for wastewater treatment in recent years. Due to the lack of active sites in traditional inert materials such as polyvinylidene fluoride (PVDF) membranes, it is difficult to bind pollutants in water with high affinity. Therefore, in this study, ZrT-1-NH 2 /PVDF mixed matrix membranes (MMMs) were prepared by combining an amino-functionalized Zr-based metal–organic cage (ZrT-1-NH 2 ) with a polymer substrate via non-solvent-induced phase separation method for the efficient removal of Orange G (OG) from water. This method has many advantages such as simplicity in operation, high applicability, controllable MOFs loading. The structural characteristics and adsorption properties and of MMMs were also investigated through a series of characterizations and experiments. The result shows that in a 100 mL OG solution with an initial concentration of 50 mg/L and pH=3, M60 exhibited significant adsorption capacity, the removal efficiency reached 97.23 %, with an adsorption capacity of 64.18 mg/g, which is much higher than the pristine PVDF membrane. It is mainly attributed to electrostatic interactions and hydrogen bonding interactions between ZrT-1-NH 2 and OG molecules. This is consistent with the DFT calculations. The introduction of ZrT-1-NH 2 filler improves the performance of PVDF membranes and expands their potential applications.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2024
·
IF 5.2
Jiali Zheng,Zhihui Li,Dongsheng Zhang,Xinqiang Zhao,Qian Zhao,Yanji Wang
Bio-based route for preparing adipic acid (AA) from 5-hydroxymethylfurfural is the direction for achieving green and sustainable AA production. In light of the challenges, such as corrosion and difficulties in recycling of I - containing homogeneous catalyst, large amount, high cost, and significant mass transfer resistance of ionic liquid (IL) catalyst, encountered in the current hydrodeoxygenation of 2,5-tetrahydrofurandicarboxylic acid (THFDCA) to AA process. Herein, 1-sulfobutyl-3-methylimidazolium iodide IL ([HSO 3 -b-mim]·I) was used to functionalize MIL-101-NH 2 through acid-base self-assembly approach, hence, a heterogeneous catalyst, IL/MIL-101-NH 2 was designed and applied in the hydrodeoxygenation of THFDCA to bio-based AA for the first time. When reacted at 180 °C for 2 h, the THFDCA conversion and AA yield were 100 % and 99.9 %, respectively. Moreover, IL/MIL-101-NH 2 exhibited remarkable stability and could be reused multiple times with minimal loss in activity. XRD, SEM, FT-IR, BET, XPS, and TG results revealed that the functionalization process involved the reaction between HSO 3 in the IL and NH 2 in MIL-101-NH 2 , forming a salt that chemically bonded the IL to MIL-101-NH 2 , thereby enhancing stability. The excellent hydrodeoxygenation activity was attributed to the synergistic effect of the Lewis acid site (Cr 3+ ) and the Lewis base nucleophilic site (I - ) within IL/MIL-101-NH 2 .
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2024
·
IF 5.3
Linlin Zheng,Xuechuan Lv,Yanan Chen,Bingyu Wei,Wanqing Hao,Ziyi Zhang,Jingru Yang,Ruiyu Liu,Xu Zhu,Yanli Zhou,Maotian Xu,Xiaohan Gao,Hui Dong
The iron-based metal–organic framework (NH2-MIL-101(Fe)) nanoparticles exhibited excellent conductivity, exceptional catalytic effect, sturdy stability flexible structure, etc. Consequently, it has been exploited in various applications. Herein, NH2-MIL-101(Fe) nanoparticles were successfully synthesized via the hydrothermal method and were grown in situ onto the pencil core electrode (PCE) for simultaneous determination of caffeic acid (CA) and acetaminophen (AP). The PCE decorated by NH2-MIL-101(Fe) as electrode substrate, combined with the dual effects of the excellent electrocatalytic activity of NH2-MIL-101(Fe) and the commendable electrical conductivity of PCE, the constructed sensor exhibits superior electrochemical sensing activity. The electrochemical behavior of CA and AP at the electrodes were investigated mainly by differential pulse voltammetry (DPV) and cyclic voltammetry (CV), exhibiting broad linear responses from 0.1 to 500 μM, and 0.08 to 800 μM for simultaneous detection of CA and AP, with detection limits of 29 nM and 24 nM, respectively. Moreover, the results of CA and AP in drug and human urine using this sensor were satisfactory, which proved that the sensor is feasible to simultaneously detect CA and AP.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2024
·
IF 5.6
Yuting Zhou,Xiang Chen,Xianlu Lei,Meiqi Huang,Miaomiao Ma,Jian Zeng,Fuyan Zhang,Shuang Li,Qi Sun,Tao Le
Zearalenone (ZEN), a prevalent mycotoxin found in cereal crops, poses a significant threat to food safety and human health. To address this issue, there is an urgent need for rapid, sensitive, and cost-effective detection methods. In this study, we developed a novel bimodal aptasensor based on NH 2 -UiO-66@MB composites for ZEN detection. Methylene blue (MB) was encapsulated within NH 2 -UiO-66 nanoparticles to enhance fluorescence intensity, and the ZEN aptamer was attached to NH 2 -UiO-66 via Zr–O–P bonds and Coulombic forces to create a gating effect. In the presence of ZEN, the aptamer bounded to ZEN, triggering a conformational change that released MB, resulting in decreased fluorescence intensity and absorbance. Under optimal conditions, the bimodal aptasensor exhibited wide linear ranges (2.5–300 ng/mL for colorimetry and 0.125–200 ng/mL for fluorescence) and low limits of detection (1.16 ng/mL for colorimetry and 0.03 ng/mL for fluorescence). Furthermore, the aptasensor demonstrated high specificity and reproducibility, with recovery rates ranging from 97.43 % to 103.71 % in spiked cereal products. These findings highlight the potential of the developed bimodal aptasensor as a novel tool for the rapid, accurate, and cost-effective detection of ZEN in cereal products, contributing to improved food safety monitoring.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RENEWABLE ENERGY
·
2025
·
IF 9.1
Jingchuan Guo,Yan Gao,Xuankai Cao,Linxuan Li,Xin Yu,Shidan Chi,Haoyu Liu,Guohong Tian,Xudong Zhao
The technology of using electricity generated from renewable energy sources such as wind and solar power for water electrolysis to produce hydrogen has achieved high efficiency, high purity, and environmental friendliness. However, its further development is constrained by the high overpotential of the oxygen evolution reaction (OER) and the high cost of precious metal catalysts. The methanol oxidation reaction (MOR) as an alternative to OER can significantly reduce overall energy consumption and accelerate the hydrogen evolution reaction. This study innovatively utilizes the metal-organic framework (MOF) of NH₂-MIL-88(Fe) to introduce Ni doping, preparing a series of Fe x Ni y -MOF and their bimetallic carbon derivatives (Fe x Ni y /C) through solvothermal synthesis and high-temperature carbonization. Results show that FeNi₂/C exhibited excellent performance in OER, with a Tafel slope of 38.69 mV·dec⁻ 1 and an overpotential of 335 mV at 10 mA cm⁻ 2 , comparable to RuO₂. In MOR, the overpotential was 193 mV, reduced by approximately 140 mV compared to OER, with outstanding stability. The catalytic mechanism was analyzed using ion chromatography, revealing the key role of Ni doping in enhancing catalytic activity and stability. This study provides new strategies for improving the electrocatalytic hydrogen production efficiency of renewable energy and reducing the production cost of hydrogen energy.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Yang Gao,Yuyang Wang,Yanlin Jiang,Chaojie Bai,Zuoqun Zhang,Yawen Zhao,Congjie Gao,Lixin Xue
To improve interface compatibility between ZIF-7 particles (PTs) and polyamide (PA) and reverse osmosis (RO) performance of thin film nano-composite (TFN) membranes, ZIF-7-NH 2 (x) particles (PTs) with different levels of -NH 2 substitution were synthesized by reacting Zn(NO 3 ) 2 with mixed ligand under different preparation conditions. The impact of their residual surface functional groups (SFGs) on the formation of inter-phase covalent bonds (ICBs) in PA separating layers were investigated relating to the inter-phase compatibility and salt rejection performance of the formed composite RO membranes. Doping ZIF-7-NH 2 PTs with ICBs could avoid the expansion of PA in acidic condition. Surprisingly high chemical stability was observed for ZIF-7-NH 2 PTs wrapped in the PA separating layers in TN membranes in the pH range of 2–13. TN(50)-0.15 membranes with strong ICBs showed 3 times higher water flux of 76 L·m −2 ·h −1 under 5.5 MPa at a high salt rejection of 98.7 %.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2024
·
IF 5.6
Meiqing Yang,Lu Wang,Congkai Xie,Haozi Lu,Junhua Wang,Ye Li,Huimin Li,Jifei Yang,Tingting Zhang,Song Liu
Cancer antigen 125 (CA125) is the gold standard biomarker for clinical diagnosis of ovarian cancer, with a threshold value of 35 U/mL in serum. In this paper, a disposable ultrasensitive immunosensor based on Ti 3 C 2 T x -MXene/amino-functionalized carbon nanotube (NH 2 -CNT) modified screen-printed carbon electrode (SPCE) was constructed for the detection of the ovarian cancer antigen CA125. By optimizing the mass ratio of Ti 3 C 2 T x to NH 2 -CNT, Ti 3 C 2 T x /NH 2 -CNT composite with excellent electrochemical properties was prepared, which is beneficial for amplifying the initial electrochemical signal. The positively charged NH 2 -CNT effectively alleviated the stacking problem of Ti 3 C 2 T x , and its amino group also facilitated the covalent immobilization of the capture antibody. Meanwhile, chitosan (CS) with excellent film-forming ability was also used to successfully enhance the adsorption of electrode material, thus improving the stability of the sensor. In addition, CS could further enhance the current signal. The prepared immunosensor exhibited excellent performance in CA125 detection with a wide linear range from 1 mU/mL to 500 U/mL, and good selectivity, reproducibility and lomg-term stability. Furthermore, the immunosensor showed satisfactory results for the detection of CA125 in clinical serum samples, which is promising for the clinical screening, early diagnosis and prognostic examination of ovarian cancer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）