ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Zhen Huang,Minghu Zhao,Chen Wang,Shixing Wang,Linqing Dai,Libo Zhang
An outstanding metal–organic framework sorbent (Zn-MOF) was prepared using Zn2+ and 3-amino-5-mercapto-1,2,4-triazole to eliminate toxic metal ions from water. Zn-MOF was detected via using Fourier-transform infrared (FTIR) spectroscopy, field-emission scanning electron microscopy (FESEM), Brunauer–Emmett–Teller (BET) analysis, and X-ray photoelectron spectroscopy (XPS). Zn-MOF is stable and has a very large surface area. The uptake properties of Zn-MOF were investigated. The maximum uptake capacity of Zn-MOF for Pb, Hg, and As ions was 1097, 32, and 718 mg/g, respectively. This was obtained at pH = 4, 5, and 6, respectively. The adsorption data is in good agreement with the Langmuir and pseudo-second-order rate models, indicating that the uptake process of Zn-MOF for toxic metal ions was a single layer uptake on a uniform surface via exchange of valence electrons. Thermodynamics shows that the uptake process is autogenic and endothermic. Zn-MOF can be reused at least 6 times. Mercury and lead strongly coordinated with Zn-MOF. The interaction between arsenic and Zn-MOF is weak chemical coordination and ion exchange. Zn-MOF has wide application prospects for toxic metal ion elimination.
研究领域:
环境科学
·
材料化学
·
水净化
·
吸附技术
·
金属-有机框架（MOFs）
✓ 已验证
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2021
·
IF 5.302
Hongrui Jia,Weitong Zhu,Shuai Yang,Fei Li,Linghang Wang
<001> oriented x Bi(Mg 1/2 Ti 1/2 )O 3 -(0.7- x )Pb(Mg 1/3 Nb 2/3 )O 3 -0.3PbTiO 3 (BMT-PMN-PT) textured ceramics are successfully fabricated by the template grain growth method using BaTiO 3 platelets as template. BMT-PMN-PT textured ceramics with different BMT contents are studied in terms of crystal structure, microstructures, dielectric and ferroelectric properties, and electric field induced strain. The as-fabricated BMT-PMN-PT textured ceramics were found to have a strong orientation along <001> direction. The frequency dispersion of dielectric constant of BMT-PMN-PT textured ceramics increases gradually and its relaxability becomes stronger with increasing BMT content. A large electric-field induced strain (0.42 % at 4 kV/mm) is obtained in 0.25BMT-0.45PMN-0.3PT textured ceramics with Lotgering factor 0.94, which is about 83 % enhancement than that of the randomly oriented ceramics (0.23 % at 4 kV/mm). The strain of 0.25BMT-0.45PMN-0.3PT textured ceramics have a relatively high thermal stability, with a slight decrease from 0.42 % to 0.28 % in the temperature range of 20−100 °C. Our research suggests that 0.25BMT-0.45PMN-0.3PT textured ceramics have a greatly potential for actuator devices applications owing to its advantages of large electric field induced strain response.
研究领域:
材料科学
·
无机非金属材料
·
功能陶瓷
·
电介质材料
·
先进制造
✓ 已验证
DOI
高影响因子
APPLIED CLAY SCIENCE
·
2026
·
IF 5.2
Zexu Zhang,Huan Zhang,Siyuan Wang,Zongyang Liu,Yue Yin,Jinfang Wu,Wenbo Wang,Fang Guo
The simultaneous realization of high adsorption efficiency, low cost, and scalable fabrication in a single adsorbent remains a significant challenge for the remediation of heavy metals-contaminated water. Here we propose a thermal-induced structural reorganization strategy to convert naturally abundant low-grade attapulgite clay into a porous silicate composite (denoted HJSiCa1.75). The composite exhibits a high uptake capacity (139.39 mg·g −1 ) and removal efficiency over 99.5% across a broad concentration range (10 mg·L −1 -200 mg·L −1 ). In real water matrices (lake water, river water, and tap water), HJSiCa1.75 outperforms commercial activated carbon 2–3 times at equivalent dosages, maintaining a removal efficiency above 99%. Site-energy distribution (SED) analysis reveals that the overall average site density of HJSiCa1.75 (0.012 g·mol/(g·kJ)) exceeds that of GHJ (0.007) and AC-CN (0.004). Thermodynamics analysis revealed that adsorption is spontaneous (ΔG° < 0) and endothermic (ΔH° = +11.95 kJ·mol −1 ). Phytotoxicity tests using aquatic plants indicate substantially reduced toxicity in treated water, as evidenced by seed germination rates and root growth comparable to those observed in clean tap water, thereby suggesting improved ecological compatibility. Pelletization and column adsorption experiments confirm the structural integrity and operational stability of the adsorbent. Mechanistic investigation identifies a synergistic interplay of electrostatic attraction, ion exchange, surface complexation, and in-situ mineralization. Collectively, this work provides a rational structural engineering route to designing high-performance heavy-metal scavengers and facilitates the value-added utilization of natural clay for scalable water purification.
✓ 已验证
DOI
高影响因子
Separations
·
2025
·Vol. 12
·期 7
·172
·
IF 2.7
Chunxiao Wang,Zhirong Chen,Nana Wang,Jianqiao Wang,Runshen He,Yu Chen,Haerfosai Nuhu,Hang Chen,Zhixuan Lin,Minqi Fan,Mingdong Chang
Heavy metal pollution, especially from Pb(II) and Cd(II), poses significant risks due to its persistence and bioaccumulation potential. Traditional removal methods face challenges like high costs and secondary pollution. This study developed a novel three-dimensional porous adsorbent XBS, derived from xanthate-modifiedPhanerochaete sordidaYK-624 (a white-rot fungus), for the rapid and efficient removal of Pb(II) and Cd(II) from wastewater. Characterization showed that XBS has a sponge-like structure with abundant functional groups, significantly enhancing its adsorption capacity and kinetics. XBS achieved 96% Pb(II) and 32% Cd(II) removal within 1 min at a 0.25 g/L dose, reaching over 95% of the maximum adsorption capacity within 30 min for Pb(II) and 240 min for Cd(II). The maximum capacities were 224.72 mg/g for Pb(II) and 82.99 mg/g for Cd(II). Kinetic and thermodynamic analyses indicated a chemisorption-driven process, which was both endothermic and spontaneous. XBS exhibited high selectivity for Pb(II) over Cd(II) and other metals (Tl(I), Cu(II)), attributed to stronger covalent interactions with sulfur- and nitrogen-containing groups. Mechanistic analyses (XRD, FTIR, and XPS) revealed that removal occurs via ion exchange, complexation, and precipitation, forming stable compounds like PbS/CdS and PbCO3/CdCO3. Given its cost-effectiveness, scalability, and high efficiency, XBS represents a promising adsorbent for heavy metal remediation, particularly in Pb(II)-contaminated wastewater treatment applications.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry C
·
2022
·Vol. 10
·期 41
·15524-15531
·
IF 8.067
Yang Han,Yangsai Lyu,Ningning Xing,Xiaolei Zhang,Kaiyuan Hu,Hui Luo,Dickon H. L. Ng,Jia Li
Micromotors that combine the merits of micro-devices with specific functions and autonomous motion have numerous applications in environmental remediation. However, their practical application is blocked by low productivity, a complex preparation process and high cost. Herein, we developed a facile biomass route to synthesize ion-imprinted MnO2/CoFe2O4 Janus micromotors with appealing recognition and capture capacities for Pb(II) ions. Owing to the combination of autonomous motion, the ion imprinting technique, and magnetic recovery, the ion-imprinted MnO2/CoFe2O4 Janus micromotors exhibited highly sensitive and selective adsorption and quick removal of lead ions from water. Such a Janus micromotor reveals great potential in environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2023
·
IF 8.8
Lingli Liu,Sheng Xu,Zhenxi Wang,Xiaoguang Chen,Meng Cao,Shangxi Zhang,Yang Liu,Jinlong Cui
In order to promote the heavy metal ions removal of porous gel adsorbent and protect the adsorbent from other pollutants in wastewater, the tetrapod ZnO whiskers (tZnO) modified by amino-chain brush was introduced into the polyvinyl alcohol (PVA) matrix to prepare the PVA/NH 2 @TAtZnO composites with brush structure for toxic Pb(II) removal. The adsorption property, adsorption process and adsorption mechanism were studied by adsorption isotherms, adsorption kinetics, adsorption thermodynamics, SEM-EDS analysis and XPS analysis. And the anti-interference ability and anti-interference mechanism were researched by SEM-EDS analysis and XPS analysis. It was found that the PVA/NH 2 @TAtZnO composites displayed a soft-hard compound pore-brush structure and showed a good selective adsorption on Pb(II). The research of isotherms and kinetics indicated that the adsorption process was fitted well to Langmuir model and pseudo-second-order model, respectively, and the research of thermodynamics revealed the endothermic nature. The adsorption mechanism was inferred as the combination of predominant chemisorption and subsidiary physisorption. Comparing with the neat PVA matrix, the PVA/NH 2 @TAtZnO composites displayed a good anti-interference property on Pb(II) adsorption and showed an alleviative clogging pore-canal structure in the wastewater with SiO 2 NPs or PAC flocculants . The anti-interference intensity ΔQ and anti-interference factor χ were proposed to reflect the anti-interference ability of this adsorbent which was promoted with the increasing amino brush length or density. By the analysis of SEM-EDS and XPS, the anti-interference mechanism was explored as the steric-hinerance effect of tZnO hard brush to suspended SiO 2 NPs pollutant and the coordination effect of functional amino soft brush to soluble PAC pollutant. Besides, the prepared PVA/NH 2 @TAtZnO adsorbent possessed a good reusability under multiple adsorption-desorption processes and also presented a well applicability in real water matrix. The research indicated the huge potential of prepared PVA/NH 2 @TAtZnO adsorbent in heavy metal ions removal.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Metals
·
2022
·Vol. 12
·期 1
·149
·
IF 2.695
Chunhui Zheng,Chunlin He,Yingjie Yang,Toyohisa Fujita,Guifang Wang,Wenchao Yang
The continuous expansion of the market demand and scale of commercial amidoxime chelating resins has caused large amounts of resin to be discarded around the world. In this study, the waste amidoxime chelating resin was reutilized as an adsorbent for the removal and recovery of Pb(II), Cu(II), Cd(II) and Zn(II) ions from aqueous solutions. The physical morphology and chemical composition of the waste amidoxime chelating resin (WAC-resin) from the factory was characterized by the elemental analyzer, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. The influence of the initial metal ions concentration, contact time, temperature and the solution pH on the adsorption performance of the metal ions was explored by batch experiments. It was shown that the optimal pH was 4. Kinetic studies revealed that adsorption process corresponded with the pseudo-second-order kinetic model and the adsorption isotherm was consistent with the Langmuir model. At room temperature, the adsorption capacities of WAC-resin for Pb2+, Cu2+, Zn2+and Cd2+reached 114.6, 93.4, 24.4 and 20.7 mg/g, respectively.Keywords:waste amidoxime chelating resin;characterization;reutilization;heavy metals
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2022
·
IF 4.177
Zi Yin,Jiangwen Liao,Guikai Zhang,Shouwei Zuo,Shengqi Chu,Lirong Zheng,Pengfei An,Huan Huang,Juncai Dong,Jing Zhang
Surface ligand passivation strategies have been extensively used to produce metal halide perovskite nanoparticles (NPs) with excellent optoelectronic properties, and a better understanding of the ligand–NP interactions is essential to unleash the full potential of perovskite NPs. Here, the well-passivated methyl ammonium lead bromide NPs were obtained when (3-aminopropyl) triethoxysilane (APTES) and oleic acid (OA) were involved as efficient dual surface ligands. We systematically explored ligand–NP interactions by using spectroscopic analysis and theory calculations. Our results demonstrated that –[−OOC–R]− from OA would preferably occupy the Br vacancies on the surface under-coordinated Pb sites in the corner-sharing octahedral framework to form [PbBr5]3–-[−OOC–R]− complexes, whereas –NH3+ of APTES can connect with Br– on the NP surface via hydrogen bonds. These surface binding interactions can trigger the lattice contraction of NPs, which can lead to an increased Pb2+ off-centering by promoting the lone pair stereochemical activity. Furthermore, the electronic band structure can be modulated by orbital interactions within the inorganic Pb–Br frame through the surface ligand effect. This work not only increases our understanding of ligand–NP interactions in terms of coordination geometry but also reveals their influence on the stereochemical activity of the Pb 6s2 electron pair, which will provide valuable inspiration for the ligand passivation strategies in the future.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2022
·
IF 5.436
Yue Mao,Guang-Hui Chen,Xiaofeng Yi,Yao Kang,Jian Zhang,Lei Zhang
In this study, with the assistance of quaternary ammonium salts we have successfully prepared a new family of salicylate-stabilized heterobimetallic Pb–Ti–oxo clusters, including H(TEA)[Pb2Ti6(μ2-O)2(μ3-O)2(OiPr)4(PA)2(Sal)6(NO3)2] (PTC-321; TEA = tetraethylammonium; HOiPr = isopropanol; H2PA = phenylphosphonic acid; H2Sal = salicylic acid), {PbTi3(μ2-O)(μ3-O)(OiPr)2(PA)(Sal)3(DMF)·CH3CN}n (PTC-322; DMF = dimethylformamide), {PbTi5(μ3-O)6(Sal)3(CH3COO)2(DMF)(OiPr)2}n (PTC-323), [Pb2Ti4(Sal)6(EtO)2(OiPr)6(HOiPr)2]·CH3NH2 (PTC-324; EtOH = CH3CH2OH), H[Pb4Ti9(μ2-O)2(μ3-O)(μ4-O)6(Sal)7(OiPr)13] (PTC-325), and Pb2Ti12(μ2-O)3(μ3-O)3(μ4-O)4(Sal)4(OEt)24 (PTC-326). Single-crystal X-ray diffraction studies demonstrate that the {Ti3Pb(Sal)3} unit acts as the building block to constitute the diverse assembly of PTC-321–PTC-323. Thereinto, the clusters in PTC-322 and PTC-323 are connected into infinite one-dimensional chains. Furthermore, the solvent effects have facilitated the heterobimetallic Pb–Ti–oxo clusters into various configurations in PTC-323–PTC-326. Solid-state ultraviolet–visible spectroscopy analysis indicates that the optical absorption bands of these compounds shift effectively toward the visible-light region, and they were also employed as electrode precursors to investigate their visible-light-driven photocurrent response.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2021
·
IF 4.464
Baitong Niu,Biying Yao,Meihua Zhu,Hongxu Guo,Shaoming Ying,Zhangxu Chen
A fern leave-like structure metal-organic frameworks (MOFs), MIL-47(as) has been fabricated by a simple one-pot hydrothermal reaction and characterized by a variety of means, such as X-ray diffraction, Fourier transform infrared spectroscopy, micro-morphology analysis, X-ray photoelectron spectroscopy and specific surface area and pore size distribution. The as-prepared MOFs were found to be an effective material for the selective electrochemical detection of microgram levels of Pb(II), Cu(II) and Hg(II) in aqueous solution performed by differential pulse voltammetry. The electrochemical properties and applications of the modified electrode were also studied, in which operational parameters such as pH, deposition potential, and deposition time, were optimized to detect trace amounts of Pb(II), Cu(II) and Hg(II) ions. The as-prepared electrode not only has good stability and repeatability, but also has good practical detection ability.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2021
·
IF 5.165
Zhe Dai,Yi-Gang Chen,Yao Guo,Fang Wang,Yuan-Yu Yang,Xian-Ming Zhang
The design of material by chemical and/or crystalline modification of a classic structure model benefits not only the optimized physical properties but also the controllability and efficiency. Herein, a new nonlinear-optical (NLO) beryllium borate crystal, Sr2Pb(BeB5O10)(BO3) (SPBBO), is successfully designed and synthesized by chemical and crystalline modification of the perovskite-like K3B6O10Cl NLO crystal. SPBBO displays a 3D BeB5O103– open-framework structure composed of interconnecting BeB5O13 groups with filled cationic Sr/Pb and anionic BO3 groups, which exhibits the striking enhancement of the second-harmonic-generation (SHG) response (8 × KDP) and birefringence (0.10) compared to the parent model. Replacement of K by Sr and Pb with a lone pair and replacement of Cl by conjugated BO3 result in the synergistic conjugation of Pb with host BeB5O103– and filled BO3 groups, contributing to the striking enhancement of the SHG and birefringence. Single-crystal measurements show that SPBBO has a short UV absorption edge of 280 nm with a wide energy band gap of 4.35 eV and an outstanding laser-induced resistant behavior with a remarkably high laser-induced damage threshold of 2100 MW cm–2. The excellent properties indicate that the SPBBO crystal is a very promising UV NLO functional material.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2021
·
IF 7.514
Hui Cao,Denghui Meng,Xutao Liu,Tai Ye,Min Yuan,Jinsong Yu,Xiuxiu Wu,Yan Li,Fengqin Yin,Fei Xu
A novel dual-frequency ultrasound-assisted enzymatic digestion (DUED) technique was used to extract Pb(II) from certified reference materials (CRMs) of wheat flour. Following this, the interactions of Pb(II) with wheat proteins were investigated to provide evidence for the selection of enzyme species. The results showed that the simultaneous use of α-amylase and flavourzyme resulted in the recovery of 97.9% of Pb(II) in 6 min under a 40 kHz ultrasonic bath combined with a 20 kHz ultrasonic probe. The exopeptidase activity of the flavourzyme was found to be the main contributor to the extraction of Pb(II) from the CRMs. Additionally, the proposed method exhibited a low detection limit (8.2 ng/g) and high recoveries of real samples (93.4%-112.2%) with RSD less than 7.33%. Furthermore, the oxygen-containing groups of wheat proteins, the nitrogen-containing groups of albumins and globulins, and the sulfur-containing groups of gliadins and glutenins were found to offer coordination sites for Pb(II).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）