文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第793至804个,产品总数2,902个

设置提升方向
Au
JOURNAL OF HAZARDOUS MATERIALS · 2022 · IF 14.224

Multifunctional Au@Pt@Ag NPs with color-photothermal-Raman properties for multimodal lateral flow immunoassay

Huiyi Yang,Qiyi He,Mingxia Lin,Li Ji,Leheng Zhang,Huanxin Xiao,Shijia Li,Qinglan Li,Xiping Cui,Suqing Zhao

Multimodal lateral flow immunoassay (LFIA) has displayed its potential to improve practicability and elasticity of point-of-care testing. Herein, multifunctional core-shell-shell Au@Pt@Ag NPs loaded with dual-layer Raman reporter molecules of 5,5′-dithiobis-(2-nitrobenzoic acid) (DTNB) with a characteristic combination of color-photothermal-Raman performance were constructed for colorimetric LFIA (CM-LFIA), photothermal LFIA (PT-LFIA) and surface-enhanced Raman scattering-based LFIA (SERS-LFIA), respectively. The highly specific nanoprobes , being obtained through the combination of the resulted dual-layer DTNB modified Au@Pt@Ag NPs with the antibody, were triumphantly utilized in exploring multimodal LFIA with one visual qualitative and two optional quantitative modes with excellent sensing sensitivity. Under optimal conditions, the limit of detection (LOD) for the model hazardous analyte dehydroepiandrosterone (DHEA) were 1.0 ng mL −1 for CM-LFIA, 0.42 ng mL −1 for PT-LFIA, and 0.013 ng mL −1 for SERS-LFIA, three of which were over 100-fold, 200-fold and 7 000-fold more sensitive than conventional visual AuNPs-based LFIA, respectively. In addition, the quantitative PT-LFIA and SERS-LFIA sensors worked well in spiked real samples with acceptable recoveries of 96.2 – 106.7% and 98.2 – 105.2%, respectively. This assay demonstrated that the developed multimodal LFIA had a great potential to be a powerful tool for accurate tracing hazardous analytes in complex samples.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
International Journal of Minerals Metallurgy and Materials · 2022 ·Vol. 29 ·期 5 ·1090-1098 · IF 3.85

Novel Au nanoparticles-inlaid titanium paper for PEM water electrolysis with enhanced interfacial electrical conductivity

Liu Yue,Huang Shaobo,Peng Shanlong,Zhang Heng,Wang Lifan,Wang Xindong

Proton-exchange membrane water electrolysis (PEM WE) is a particularly promising technology for renewable hydrogen production. However, the excessive passivation of the gas diffusion layer (GDL) will seriously affect the high surface-contact resistance and result in energy losses. Thus, a mechanism for improving the conductivity and interface stability of the GDL is an urgent issue. In this work, we have prepared a hydrophilic and corrosion resistant conductive composite protective coating. The polydopamine (PDA) film on the Ti surface, which was obtained via the solution oxidation method, ensured that neither micropores nor pinholes existed in the final hybrid coatings. In-situ reduced gold nanoparticles (AuNPs) improved the conductivity to achieve the desired interfacial contact resistance and further enhanced the corrosion resistance. The surface composition of the treated samples was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results indicated that the optimized reaction conditions included a pH value of 3 of HAuCl 4 solution with PDA deposition (48 h) on papers and revealed the lowest contact resistance (0.5 mΩ·cm 2 ) and corrosion resistance (0.001 μA·cm −2 ) in a 0.5 M H 2 SO 4 + 2 ppm F − solution (1.7 V vs. RHE) among all the modified specimens, where RHE represents reversible hydrogen electrode. These findings indicated that the Au—PDA coating is very appropriate for the modification of Ti GDLs in PEM WE systems.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Advances · 2022 ·Vol. 3 ·期 23 ·8557-8566 · IF 0

Metal–organic frameworks loaded Au nanozymes with enhanced peroxidase-like activity for multi-targeted biodetection

Quan Liu,Hanhan Wang,Qi Yang,Yuping Tong,Weiwei He

Size and surface effects definitely play an important role in promoting the enzyme-like catalytic activity of metal nanozymes. However, monodisperse small-size nanozymes require surface modification to avoid agglomeration, which largely limits their catalytic activity. In this work, a zirconium-based metal organic framework (UiO-66) with high chemical stability and porosity was applied as a carrier, on which uniform Au nanoparticles (NPs) were successfully loaded, forming Au/UiO-66 nanocomposites. Benefiting from the naked and active surface of the distributed Au NPs, Au/UiO-66 exhibited prominently enhanced peroxidase activity as well as good performance and stability. Inspired by the significant peroxidase activity of Au/UiO-66 and the distinct inhibitory effect of biological substances on peroxidase activity, a multi-targeted analytical platform was designed and established. The results proved that the developed platform realized accurate and effective detection for glucose, dopamine and HS− with a limit of detection (LOD) of 0.033 mM, 0.0022 mM and 0.0016 mM, respectively.

CAS / MDL: 9001-37-0
✓ 已验证 产品关联 DOI
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES · 2022 ·Vol. 23 ·期 19 ·11197 · IF 6.208

Metal Cluster Triggered-Assembling Heterogeneous Au-Ag Nanoclusters with Highly Loading Performance and Biocompatible Capability

Xiaoxiao He,Xiaohong Ma,Yujun Yang,Xi Hu,Teng Wang,Shiyue Chen,Xiang Mao

In this work, we firstly report the preparation of heterogeneously assembled structures Au-Ag nanoclusters (NCs) as good drug carriers with high loading performance and biocompatible capability. As glutathione-protected Au and Ag clusters self-assembled into porous Au-Ag NCs, the size value is about 1.358 (±0.05) nm. The morphology characterization revealed that the diameter of Au-Ag NCs is approximately 120 nm, as well as the corresponding potential ability in loading performance of the metal cluster triggered-assembling process. Compared with individual components, the stability and loading performance of heterogeneous Au-Ag NCs were improved and exhibit that the relative biocompatibility was enhanced. The exact information about this is that cell viability was approximately to 98% when cells were incubated with 100 µg mL−1particle solution for 3 days. The drug release of Adriamycin from Au-Ag NCs was carried out in PBS at pH = 7.4 and 5.8, respectively. By simulating in vivo and tumor microenvironment, the release efficiency could reach over 65% at pH = 5.8 but less than 30% at pH = 7.2. Using an ultrasound field as external environment can accelerate the assembling process while metal clusters triggered assembling Au-Ag NCs. The size and morphology of the assembled Au-Ag NCs can be controlled by using different power parameters (8 W, 13 W, 18 W) under ambient atmosphere. Overall, a novel approach is exhibited, which conveys assembling work for metal clusters triggers into heterogeneous structures with porous characteristic. Its existing properties such as water-solubility, stability, low toxicity and capsulation can be considered as dependable agents in various biomedical applications and drug carriers in immunotherapies.Keywords:Au-Ag NCs;heterogeneous structures;assembling;drug carriers;biocompatibility

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Nature Communications · 2022 ·Vol. 13 ·期 1 ·1-11 · IF 17.694

Molecular-level insight into photocatalytic CO2 reduction with H2O over Au nanoparticles by interband transitions

Shangguan Wenchao,Liu Qing,Wang Ying,Sun Ning,Liu Yu,Zhao Rui,Li Yingxuan,Wang Chuanyi,Zhao Jincai

Achieving CO 2 reduction with H 2 O on metal photocatalysts and understanding the corresponding mechanisms at the molecular level are challenging. Herein, we report that quantum-sized Au nanoparticles can photocatalytically reduce CO 2 to CO with the help of H 2 O by electron-hole pairs mainly originating from interband transitions. Notably, the Au photocatalyst shows a CO production rate of 4.73 mmol g −1 h −1 (~100% selectivity), ~2.5 times the rate during CO 2 reduction with H 2 under the same experimental conditions, under low-intensity irradiation at 420 nm. Theoretical and experimental studies reveal that the increased activity is induced by surface Au–O species formed from H 2 O decomposition, which synchronously optimizes the rate-determining steps in the CO 2 reduction and H 2 O oxidation reactions, lowers the energy barriers for the *CO desorption and *OOH formation, and facilitates CO and O 2 production. Our findings provide an in-depth mechanistic understanding for designing active metal photocatalysts for efficient CO 2 reduction with H 2 O.

CAS / MDL: 16940-66-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2022 · IF 7.139

Synthesis of Au-NiOx/ultrathin graphitic C3N4 nanocomposite for electrochemical non-platinum oxidation of methanol

Han Sun,Haiping Huang,Chao Hu,Yu Yan,Yongmei Hu,Sui-Jun Liu,He-Rui Wen

The Au-NiO x /g-C 3 N 4 (graphitic C 3 N 4 ) nanocomposite is synthesized and utilized as catalyst for the electrochemical oxidation of methanol in the alkaline electrolyte . Au and Ni nanoparticles are uniformly dispersed on ultrathin g-C 3 N 4 nanosheets by in-situ synthesis with nickel nitrate and chloroauric acid as Ni and Au resource respectively. The structure, morphology and component of the prepared nanocomposites are characterized by different techniques like transmission electron microscopy , X-ray diffraction, elemental mapping image and X-ray photoelectron spectroscopy. The results prove that the nanoparticles are well-distributed and embedded in g-C 3 N 4 nanosheets. The electrochemical performance of different nanocomposite for methanol oxidation reaction (MOR) is tested under alkaline conditions via electrochemical technologies. Compared to the pure g-C 3 N 4 and Au/g-C 3 N 4 , the NiO x /g-C 3 N 4 exhibits electrochemical catalytic effect toward methanol electro-oxidation with the existence of Ni. This electrochemical catalytic performance is enhanced significantly for the Au-NiO x /g-C 3 N 4 , whose oxidation peak current density is 2.32 times higher than NiO x /g-C 3 N 4 . The slope value drew from the Tafel plots shows that the Au-NiO x /g-C 3 N 4 owns the lowest Tafel slope (67.00 mV/dec). After the 7200 s stability test, the Au-NiO x /g-C 3 N 4 catalyst can still maintain a high current density . Long-term stability and good anti-poisoning ability promise Au-NiO x /g-C 3 N 4 a competitive non-Pt catalyst for the methanol oxidation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemCatChem · 2022 ·Vol. 14 ·期 21 ·e202200785 · IF 5.497

Carbon-Supported Au Catalyst in Acetylene Hydrochlorination: Enhancing Catalytic Performance by Complexation of Dicarbonyl Ligands

Xianliang Qiao,Xinyu Liu,Yang Yang,Zhenhua Mao,Tianhe Li,Lele Gao,Chaoyue Zhao,Qingxin Guan,Wei Li

Graphical Acetylene hydrochlorination : Dicarbonyl ligands enhanced the dispersion of Au species, suppressed the reduction of Au cations, and reduced the formation of carbon deposits during catalytic acetylene hydrochlorination. Carbon-supported Au (Au/AC) has been proven to be one of the most promising catalysts in the field of acetylene hydrochlorination. However, the catalytic performance of conventional Au/AC catalyst is usually limited due to the unsatisfactory dispersion of active Au cation on the surface of the support, carbon deposition, and inevitable reduction to inactive Au nanoparticles. Herein, Au catalysts with highly dispersed Au cation were developed using the complexation of dicarbonyl ligand N-chlorosuccinimide (NCS) and N-methylsuccinimide (NMS). The obtained Au−NMS/AC and Au−NCS/AC catalysts with 0.1 wt.% Au loading possessed acetylene conversion of 98 % and 88 % at 180 °C and GHSV (C 2 H 2 ) of 160 h −1 , which were clearly better than that of pristine Au/AC. The characterization results showed that coordination between Au cation and ligands enhanced the dispersion of Au species, suppressed the reduction of Au cation, and reduced the formation of carbon deposits. Density functional theory (DFT) calculations suggest that Au−NMS/AC and Au−NCS/AC catalysts follow a HCl-preferred concerted addition reaction mechanism with lower reaction energy barrier. This favors the high activity and nuclearity stability of the Au center. This study provides great potential for the use of dicarbonyl ligands on Au-based catalysts in acetylene hydrochlorination.

CAS / MDL: 128-09-6 1121-07-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2022 · IF 7.392

High-performance flexible supercapacitors with hierarchical structured cathode (NiCo2O4/Au/MnO2) and anode (NiCo2S4/PPy)

Du Huang,Zhenya Lu,Xingyue Liu,Junning Gao,Zhiwu Chen,Xin Wang,Xiaoyi Fu

NiCo 2 O 4 nanoflowers with high specific surface area were prepared on nickel foam (NF) by hydrothermal method and used as frameworks for developing cathode and anode of flexible asymmetric supercapacitor. With the unique nanoflower-like NiCo 2 O 4 arrays as skeleton, the NiCo 2 O 4 /Au/MnO 2 cathode was prepared by gold-spraying and electrochemical deposition and the NiCo 2 S 4 /PPy anode was prepared by second-hydrothermal and electro-polymerization. The hierarchical structured electrodes offer sufficient redox sites and adequate channels for accelerating ion and electron transport between electrodes and electrolyte. Moreover, the NiCo 2 S 4 /PPy was first reported as the anode, and its cycling stability (capacitance retention of 86.04 % after 5000 cycles) and specific capacitance (1612.5F/g at 1 A/g). The assembled flexible all-solid-state asymmetric supercapacitor (NiCo 2 O 4 /Au/MnO 2 // NiCo 2 S 4 /PPy) displays a high energy density of 206.37 Wh kg −1 at a power density of 398.57 W kg −1 and an outstanding cyclability (capacitance retention of 83.41 % after 5000 cycles).

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PLoS One · 2022 ·Vol. 17 ·期 8 ·e0273169 · IF 3.752

Enhanced photocatalytic degradation of tetracycline hydrochloride over Au-doped BiOBr nanosheets under visible light irradiation

Chu-Ya Wang,Xin Fang,Qi Zeng,Heng-Deng Zhou,Yongze Lu

Bismuth(III) oxybromide (BiOBr) is a typical photocatalyst with a unique layered structure. However, the response of BiOBr to visible light is not strong enough for practical application. Moreover, the charge separation efficiency of BiOBr still needs to be improved. In this study, series of Au-doped BiOBr photocatalysts was prepared through a facile one-step hydrothermal method. The as-prepared Au 0.3 -BiOBr nanosheets exhibited an excellent electrochemical performance. The charge separation efficiency of Au 0.3 -BiOBr nanosheets was enhanced by 18.5 times compared with that of BiOBr. The intrinsic photocatalytic activity of Au 0.3 -BiOBr nanosheets in the degradation of tetracycline hydrochloride was approximately twice higher than that of BiOBr under visible light irradiation. In addition, three pathways were identified for the photocatalytic degradation and mineralization of tetracycline hydrochloride, which involve four reactions: hydroxylation, demethylation, ring opening and mineralization. Accordingly, this study proposes a feasible and effective Au-doped BiOBr photocatalyst, and describes a promising strategy for the design and synthesis of high-performance photocatalysts.

CAS / MDL: 12124-97-9 10035-06-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
NANOTECHNOLOGY · 2022 ·Vol. 33 ·期 45 ·455103 · IF 3.953

Yolk-shell shaped Au-Bi2S3 heterostructure nanoparticles for controlled drug release and combined tumor therapy

Tingting Zhao,Qin Zhang,Feng Cang,Shilong Wu,Yu Jiang,Qiyao Zhao,Yifan Zhou,Xiaomeng Qu,Xuesong Zhang,Yushen Jin,Yanyan Li,Yujie Fu

To fabricate a novel stimuli-responsive system enabling controlled drug release and synergistic therapy, yolk-shell shaped bismuth sulfide modified with Au nanoparticles (Au-Bi2S3) was prepared. The Au-Bi2S3 nanomaterial with heterojunction structure exhibited excellent photothermal conversion efficiency and considerable free radicals yield under laser irradiation. The drug delivery capacity was confirmed by co-loading Berberine hydrochloride (BBR) and a phase change material 1-tetradecanol (PCM), which could be responsible for NIR light induced thermal controlled drug release. In vitro investigation demonstrated that Au-Bi2S3 has cell selectivity, and with the assistance of the properties of Au-Bi2S3, the loaded drug could give full play to their cancer cell inhibition ability. Our work highlights the great potential of this nanoplatform which could deliver and control Berberine hydrochloride release as well as realize the synergistic anti-tumor strategy of photothermal therapy, photodynamic therapy and chemotherapy for tumor therapy.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR LIQUIDS · 2022 · IF 6.633

Z-scheme Au@TiO2/Bi2WO6 heterojunction as efficient visible-light photocatalyst for degradation of antibiotics

Kejie Jin,Mian Qin,Xinyi Li,Rui Wang,Yang Zhao,Huan Wang

Semiconductor photocatalysis can be regarded as one of effective strategies to overcome the great challenges encountered with conventional technologies for environmental remediation. In this research, Z-scheme heterostructure composed of core–shell Au@TiO 2 nanoparticles and flower-like Bi 2 WO 6 nanosheets has been successfully prepared through the reverse micelle sol–gel method followed by a hydrothermal process. The structural characteristics, chemical compositions and photoelectrochemical properties of this ternary composite photocatalyst (Au@TiO 2 /Bi 2 WO 6 ) were further investigated in detail. Benefitted from the synergy of the heterojunction construction and metallic surface plasmon resonance effect, the Au@TiO 2 /Bi 2 WO 6 with an optimal mass ratio of Au@TiO 2 to Bi 2 WO 6 exhibited the significantly enhanced photocatalytic activity for degradation of antibiotics under visible-light irradiation, in which the degradation efficiency of sulfamethoxazole (SMX) and tetracycline hydrochloride (TC) could be up to 96.9% and 95.0% within 75 min, respectively. The reaction rate constant for SMX and TC degradation was calculated to be around 0.0425 min −1 and 0.0314 min −1 , which has 7.2 times and 1.9 times enhancement compared with single Bi 2 WO 6 , respectively. In addition, the cyclic stability and photocatalytic mechanism of Au@TiO 2 /Bi 2 WO 6 were further verified. Our primary results provide a feasible strategy to develop core–shell heterostructured photocatalysts with superior performance for the efficient removal of low-concentration antibiotics in water.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2021 · IF 4.098

One-step fabrication of Au-Ag alloys and its application for catalysts and SERS sensors

Wenxian Wei,Dan Yu,Yu Du,Yicheng Ding,Qingli Huang

Au-Ag alloy nanoparticles (NPs) with controllable size and composition were synthesized by a facile, one-pot hydrothermal method. Various characterization techniques including TEM, UV–vis, EDX, HAADF-STEM and XPS were used to discuss the influencing factors for the size and composition of Au-Ag alloy NPs. It is obvious that the size and composition of Au-Ag alloy NPs could be adjusted by the experimental parameters. Catalytic and SERS performance of the Au-Ag alloy NPs were further investigated. Ideal catalytic and SERS performance could be also obtained via optimizing the size and composition of Au-Ag alloy. This work is of importance in theory research and practical application of the noble metal nanocomposites.

CAS / MDL: 1849-36-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。