ACS Applied Polymer Materials
·
2023
·
IF 5
Jizhen Huang,Zhaoqing Lu,Jiaoyang Li,Fengfeng Jia,Yafang Wang,Li Hua
The public health and water ecosystems are affected by industrial wastewater, resulting in water pollution including heavy metal ions and organic matter, so that adsorbents with multiple adsorption effects are developed to achieve efficient adsorption. In this work, the porous zeolitic imidazolate framework-8 (ZIF-8) was assembled onto cellulose nanofiber (CNF)/poly(vinyl alcohol) (PVA)/aramid nanofiber (ANF) composites and the ZIF-8@CNF/PVA/ANF (ZIF-8@CPA) composite aerogel was designed and fabricated. The composite aerogel has good physical properties and optimal adsorption performance assembled with 20% ZIF-8 content. The ZIF8-20@CPA composite aerogel has high porosity of about 99.62%; the specific surface area is 120.53 m2/g, and pore size is as low as 11.82 μm with a lower volume shrinkage of 1.31%. The adsorption capacity of Cr6+ and rhodamine B about lightweight ZIF8-20@CPA composite aerogels reached 231 mg/g and 201 mg/g, respectively. Due to the 3D porous structure, electrostatic interaction, and ion synergism generated by its assembly with ZIF-8, the composite aerogels have good adsorption performance for heavy metal ions and conform to the relationship of a pseudo-second-order kinetic model. Thus, this study suggests a route to fulfill the multiple adsorbents.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Yu Zhu,Qinyun Xv,Dan Wang,Bingxin Sun,Yujia Wang,Zhiguo Han,Yongbo Gou,Jiayu Liu,Bingdong Li
The overuse of norfloxacin (NOR) has attracted wide attention because of the persistence and bio-accumulate in ecosystems and the negative impacts on human health. To solve the environmental issue, BiOI/TiO 2 p-n heterojunctions have been developed and decorated with a porous ZIF-8 to obtain novel hollow BiOI/TiO 2 /ZIF-8 heterojunctions, which were further characterized by XRD, SEM, HRTEM , XPS , BET, UV–vis DRS, photoluminescence , ESR , photocurrent and EIS analyses. The BiOI/TiO 2 /ZIF-8 heterojunctions exhibited evidently improved photocatalytic performance compared with pristine BiOI , TiO 2 and BiOI/TiO 2 composites under visible light irradiation. ZIF-8 plays a key role in both the enhancement of adsorption and the photocatalytic activity in NOR removal. ·O 2 - and ·OH radicals were the two dominating active species in the photocatalytic process according to the trapping experiments. In 2-BTZ system, large specific surface area, highly effective charge carrier migration with inhibiting recombination, more negative CB and positive VB to generate more active ·O 2 - and ·OH species resulted in superior photocatalytic activity. This work provides a new idea to design a kind of photocatalytic heterostructure with more active species for potential application in the field of environmental treatment.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2022
·Vol. 14
·期 2
·332
·
IF 4.967
Qiang Li,Xianhui An,Xueren Qian
Cellulose fiber (CelF) is a biodegradable and renewable material with excellent performance but negligible triboelectric polarizability. Methods to enhance and rationally tune the triboelectric properties of CelF are needed to further its application for energy harvesting. In this work, methyl-orange-doped polypyrrole (MO-PPy) was in situ coated on CelF as a mediating layer to promote the growth of metal–organic framework ZIF-8 and to construct a cellulose-based triboelectric nanogenerator (TENG). The results showed that a small amount of MO-PPy generated in situ significantly promoted the growth of ZIF-8 on CelF, and the ZIF-8 deposition ratio was able to increase from 7.8% (ZIF-8/CelF) to 31.8% (ZIF-8/MO-PPy@CelF). ZIF-8/MO-PPy@CelF remained electrically conductive and became triboelectrically positive, and the triboelectricity’s positivity was improved with the increase in the ZIF-8 deposition ratio. The cellulose-based TENG constructed with ZIF-8/MO-PPy@CelF (31.8% ZIF-8 deposition ratio) and polytetrafluoroethylene (PTFE) could generate a transfer charge of 47.4 nC, open-circuit voltage of 129 V and short-circuit current of 6.8 μA—about 4 times higher than those of ZIF-8/CelF (7.8% ZIF-8 deposition ratio)—and had excellent cycling stability (open-circuit voltage remained almost constant after 10,000 cycles). MO-PPy not only greatly facilitated the growth of ZIF-8 on CelF, but also acted as an electrode active phase for TENG. The novel TENG based on ZIF-8/MO-PPy@CelF composite has cheerful prospects in many applications, such as self-powered supercapacitors, sensors and monitors, smart pianos, ping-pong tables, floor mats, etc.Keywords:cellulose fiber;polypyrrole;methyl orange;ZIF-8;mediating layer;triboelectric nanogenerator
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHEMICAL JOURNAL
·
2022
·
IF 5.304
Yilin Wang,Chenxi Wang,Li Zhang,Jiaodi Li,Rongjie Li,Qian Fu,Chunyan Li,Pengcheng Zhao,Yixi Xie,Junjie Fei
Kaempferol (KA), an important polyphenolic compound, is able to combat a variety of inflammatory diseases. Here, a ZnWO 4 / porous nanocarbon based electrochemical sensor has been constructed to detect KA for the first time. Innovatively, ZnWO 4 has been synthesized by pyrolysis using ZIF-8 as a zinc source, while porous nanocarbon was introduced. The nanocomposites have been characterized by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy and demonstrated that Acidified ZnWO 4 /porous nanocarbon has been successfully prepared. Notably, the excellent catalytic properties of ZnWO 4 and the great enrichment ability and conductivity of porous nanocarbon greatly enhanced the detection performance of the sensor for KA with a linear range of 0.009–0.7 μM and a LOD of 2.03 nM. In addition, the sensor has obtained satisfactory results for the detection of KA in actual natural samples (broccoli and kaempferia powder). The reaction sites and redox mechanism of KA were shown by density functional theory. Finally, the sensor is highly sensitive and stable, making it a novel detection method with extremely high potential applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2022
·
IF 7.968
Wenjun Zhu,Sylvestre Ndayiragije,Xiaohua Zuo,Xiaofei Zhang,Guanghui Wang,Xiaobo Wang
Single-atom Cu and N co-coordinated porous carbon (Cu-N-C) was synthesized by hydrothermal-calcination using zinc zeolite imidazole frameworks (ZIF-8) as the precursor. The catalyst showed excellent adsorption and catalytic ability due to the ideally-dispersed single atomic copper sites and the unique nitrogen-doped porous carbon. The complete removal of sulfamethoxazole (SMX, 18 mg/L) could be achieved within 40 min of pre-adsorption and 25 min of oxidative degradation in the present of peroxymonosulfate (PMS). The adsorption capacity of Cu-N-C (0.2 g/L) was evaluated to be 58.69 mg/g. The apparent degradation rate constant ( k ) of SMX on Cu-N-C was 0.155 min -1 , which was 14.1 times faster than that on N-C (0.011 min -1 ). From the activation mechanism, it was found that CuN units acted as the main active sites in Cu-N-C for PMS activation . EPR analysis and quenching experiments verified that the reactive oxygen species (ROSs) of SO 4 · - and 1 O 2 were involved in the decomposition and mineralization of SMX. This work provides a new perspective for the development of Fenton-like single-atom catalysts.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Lei Fan,Yuguo Gong,Jiafeng Wan,Yuhan Wei,Haolin Shi,Chuntao Liu
In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS 2 @ZNC contributed to the exposure of more edge-active sites of MoS 2 . At the same time, Mo 4+ and Mo 6+ co-existed in MoS 2 @ZNC, which promoted the generation of H 2 O 2 and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS 2 loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS 2 and ZNC affected the structure and properties of MoS 2 @ZNC composites. Moreover, the electrochemical performance of prepared MoS 2 @ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS 2 @ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS 2 @ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS 2 @ZNC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Magnesium and Alloys
·
2022
·
IF 11.813
Shiquan Jiang,Weidong Li,Jinyu Liu,Jiqiong Jiang,Zhe Zhang,Wei Shang,Ning Peng,Yuqing Wen
A longstanding quest in material science has been the development of superhydrophobic coating based on a single material, without the requirement of fluorination or silane treatment. In this work, the micro-arc oxidation (MAO) coating as transition layer can effectively enhance the bonding force of the superhydrophobic coating. The semiconductor@metal organic frameworks (MOFs) core-shell structure was synthesized by a simple self-templating method, and obtained ZnO@2-methylimidazole zinc salt (ZIF-8) nanorods array on magnesium (Mg) alloy. ZnO nanorods not only act as the template but also provide Zn 2+ for ZIF-8. In addition, we proved that the ligand concentration, synthesis time and temperature are the keys to the preparation of ZnO@ZIF-8 nanorods. As we expect, the ZnO@ZIF-8 nanorods array can trap air in the gaps to form an air layer, and the coating exhibits superhydrophobic properties (154.81°). Excitingly, ZnO@ZIF-8 nanorods array shown a superhydrophobic property, without the requirement of fluorination or silane treatment. The results shown that the coating has good chemical stability and self-cleaning performance. Meanwhile, the corrosion resistance has been significantly improved, R ct was increased from 1.044×10 3 to 1.414×10 6 Ω/cm 2 and I corr was reduced from 4.275×10 −5 to 5.611×10 −9 A/cm 2 . Therefore, the semiconductor@MOFs core-shell structure has broad application prospects in anti-corrosion.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2022
·Vol. 29
·期 7
·1-8
·
IF 3.061
Liu Yuhao,Wang Jieqi,Chen Liping,He Yong
In order to enhance the adsorption and photocatalytic property of polyphenylene sulfide (PPS) melt-blown film, PPS melt-blown film was modified by loading ZIF-8 nanomaterial on the surface of the film via a simple solvothermal water method, the PPS melt-blown film was impregnated in advance. Film performance was characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), X-ray diffraction (XRD). Results from FTIR and XRD showed that ZIF-8 was introduced into the modified PPS film successfully. The modified PPS film was endowed with excellent adsorption and photocatalytic compared with the original PPS by the result of enhanced dye removal. The removal rate of methyl blue (MB) by PPS/ZIF-8 film within the range of pH = 3–11 of the environmental solution were more than 80%, up to 99.1%. The dye removal rate still remained 80% after 5 repeat cycles, showed that the modified film has good stability.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2022
·
IF 4.326
Lei Deng,Senqing Fan,Yu Chen,Jiaojiao Chen,Zenghui Mai,Zeyi Xiao
A binder-free self-supported CuO/ZIF-8@NiF electrode is fabricated with CuO/ZIF-8 particles in situ growth in nickel foam pores. ZIF-8 is first assembled inside the nickel foam pores and then Cu2+ is adsorbed around the surface of ZIF-8 crystal, and finally reduced and oxidized to form CuO. Scanning electron microscopy indicates CuO is uniformly distributed on the surface of ZIF-8. The Cu element is significantly increased from 1.16 to 30.91 mg·g–1 under the existence of ZIF-8 from inductively coupled plasma results. The electrochemical analyses show that the electrochemical active surface area of the CuO/ZIF-8@NiF electrode can be increased two times while its electronic transport resistance can be reduced to one-seventh compared with the CuO/ZIF-8/NiF electrode with CuO/ZIF-8 binding on the substrate. The detection tests exhibit enhanced electrochemical properties with a sensitivity of 5640 μA·mM–1·cm–2, a low detection limitation of 0.1 μM, and a linear detection range from 0.5 to 120 μM. The biosensor presents good anti-interference property, stability, and a 101.08–104.53% recovery rate.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Chao Xue,Qu Zhang,Wenpeng Li,Gary Ownes,Zuliang Chen
The removal of antimonate (Sb(V)) species from wastewaters has become a growing concern due to their known genotoxicity and carcinogenicity. In this paper, a hybrid ZIF-8@FeNPs material was synthesized from Zeolite Imidazole Framework-8 (ZIF-8) and zero-valent iron nanoparticles ( n ZVI) and subsequently used to remove Sb(V) from aqueous solution. Characterization indicated that ZIF-8@FeNPs were successfully synthesized and that the valence state of Sb(V) did not change during the removal process, where adsorption of Sb(V) was facilitated by the high specific surface area and porosity of the hybrid. Advanced characterization also showed that Zn-OH and iron oxides were adsorbed on the material after complexation with Sb(V). Kinetic, isothermal, and thermodynamic modeling indicated that the adsorption process followed pseudo-second-order kinetics, via multilayer adsorption which was spontaneous and endothermic. A Sb(V) removal mechanism based on adsorption was proposed. In mining wastewater containing 1.121 mg·L −1 Sb(V), 89.7 % could be removed by the material. During repeated reuse of ZIF-8@FeNPs for the removal of 1 mg·L −1 Sb(V) through four successive cycles, the removal efficiency was still relatively high (39.1 %) after the fourth cycle indicating good potential for practical applications. In addition, ZIF-8@FeNPs also exhibited magnetic properties, which demonstrated that Sb(V) could be easily recovered from wastewater post removal by ZIF-8@FeNPs.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2022
·
IF 3.898
Zhengchi Yin,Xiaoke Wu,Yanwei Yang,Huayu Zhang,Wangtao Li,Ruimin Zhu,Qiancheng Zheng,Zhengbao Wang
Compared to inorganic supports, polymeric supports can offer additional benefits, e.g. , easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks (ZIFs) membrane layer, which usually requires complex surface modification or seeding. Herein, we demonstrate that a dual-layer asymmetric polymer support prepared by a simple spinning process is a good candidate for the preparation of ZIF-8 membrane. The inner layer of the support is an organic hollow fiber (PES) with finger-like pores, and the outer layer is a ZnO-PES composite layer with finger-like pores also. The ZnO-PES composite layer is expected to contain uniform ZnO crystals in the polymer matrix, i.e ., the ZnO particles in the skin layer of the support are not easy to fall off. Under the induction of ZnO particles in the outer layers, continuous ZIF-8 membranes can be prepared by single in-situ crystallization, showing good adhesion to the supports. The obtained ZIF-8 membranes show a H 2 permeance of 8.7 × 10 −8 mol·m −2 ·s −1 ·Pa −1 with a H 2 /N 2 ideal separation selectivity of 18.0. The design and preparation of this dual-layer polymer support is expected to promote the large-scale application of MOF membranes on polymer supports.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Sheng Liu,Yiyang Zeng,Jun Liu,Jiamao Li,Hao Peng,Hui Xie,Hao Zou,Chengjian Xiao,Xiaohui Hua,Jingliang Bao,Liang Xian,Yuanli Li,Fangting Chi
The capturing and storage of iodine from nuclear waste through secure and advantageous techniques are significant. In this work, a novel bismuth-based porous carbon material referred to as Bi@MVF is elaborately synthesized employing a dipping-reduction technique to seize iodine-129 ( 129 I), in which bismuth particles are uniformly embedded and allotted on the porous carbon network as multiple active sites. Accordingly, Bi@MVF lets in a highly-efficient iodine absorption potential of up to 1560 mg/g after publicity to iodine at 120 ℃ for 4 h, superior to most standard iodine adsorbents. The excessive adsorption kinetics of these Bi@MVF adsorbents is typically attributed to the specific porous carbon substrates' full-size particular surface area and the adsorbent’s synergistic effect. An in-depth perception of the iodine adsorption mechanism exhibits that the chemical adsorption turns into a powerful mechanism via the reaction between bismuth and iodine to structure a steady section BiI 3 . Moreover, an easy post-treatment system for these Bi@MVF adsorbents is adopted to gain the greater corrosion-resistant iodine-binding segment Bi 5 O 7 I, attaining a nominal iodine leaching rate. Therefore, the designed Bi@MVF will be a tremendous 129 I stabilizer, and we will contribute a new approach for customizing new iodine adsorbents with excessive adsorption doses.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）