Journal of Water Process Engineering
·
2023
·
IF 7
Chumin Yan,Xiaoli Dong,Yu Wang,Nan Zheng,Hongchao Ma,Xiufang Zhang
Inorganic semiconductors prepared from MOFs as sacrificial precursors are promising photocatalytic materials. In this work, the direct Z -scheme MoS 2 /NH 2 -MIL-68(In)-derived In 2 S 3 (MoS 2 /In 2 S 3 ) heterojunction composites have been synthesized by sulfidation treatment of MoS 2 /NH 2 -MIL-68(In) (MoS 2 /NM68) composites. Morphological and crystal structural results confirmed that MoS 2 was uniformly dispersed in In 2 S 3 . According to the reduction for Cr(VI) experimental results, the photocatalytic performance of MoS 2 /In 2 S 3 heterojunction composite under visible light irradiation is significantly better than that of pristine MoS 2 and In 2 S 3 , respectively. In addition, the photocatalytic activities of the MoS 2 /In 2 S 3 (II) at different pH and high concentrations of Cr(VI) were also investigated. This paper presents a novel approach to the construction of heterojunction photocatalytic materials using MOFs as sacrificial precursors.
✓ 已验证
产品关联
DOI
高影响因子
ACS Omega
·
2020
·
IF 2.87
Jia Wang,Yansong Liu,Xiuyan Guo,Hongqiang Qu,Ran Chang,Jing Ma
Metal–organic frameworks (MOFs) exhibit highly designable properties and have been used in wide applications. To further improve their performance, the modification of MOFs is an effective method. However, the modification process is usually complicated. Besides, the sustainable use of MOFs is difficult to achieve due to the complicated recycling treatment. Herein, we designed a polyethyleneimine (PEI)-modified NH2-MIL-101(Al) composite (PEI@NH2-MIL-101(Al)). This composite showed excellent dye removal performance of methyl orange (MO, 89.4%) and Direct Red 80 (DR80, 99.8%). Remarkably, the dye removal application of PEI@NH2-MIL-101(Al) also acted as a modification process toward flame retardant application. Thus, the dye-adsorbed PEI@NH2-MIL-101(Al) composite (MO-PEI@NH2-MIL-101(Al) and DR80-PEI@NH2-MIL-101(Al)) was sustainably used as an effective flame retardant for an epoxy resin (EP) at low additions (4.0 wt %). The limiting oxygen values of EP/MO-PEI@NH2-MIL-101(Al) and EP/DR80-PEI@NH2-MIL-101(Al) increased to 26.5 and 26.7%, respectively. The heat release and the smoke production of dyes-PEI@NH2-MIL-101(Al)/EP were greatly reduced compared with those of EP. This strategy provides a simple and effective modification method for MOFs. Meanwhile, the modified MOF composite can achieve sustainable application, giving full play to the advantages of MOFs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICAL MATERIALS
·
2020
·
IF 2.779
Lanqing Ling,Yu Tu,Xuanyu Long,Qianwen Li,Jiabao Gu,Nan Liu,Zequan Li
The emission of organic dye wastewater poses a great threat to the ecological environment. Therefore, it is necessary to prepare environment-friendly photocatalytic materials with high photocatalytic performance to degrade organic dyes. In this work, a new composite photocatalyst SnS 2 /NH 2 -MIL-125 (Ti) was formed by loading the multiphase SnS 2 of quantum dots (QDs) and hexagonal nanodiscs (NDs) on the NH 2 -MIL-125 (Ti) through one-step hydrothermal method , then used it to remove 40 mg/L Rhodamine B (RhB) under visible light . Compared with SnS 2 and NH 2 -MIL-125 (Ti), the photocatalytic degradation activity of the 12 wt% SnS 2 /NH 2 -MIL-125 (Ti) was enhanced by 2.4 and 2.1 times respectively, reaching 90.5%, after 80 min of visible light irradiation. The four times recycling test shows that this photocatalyst has outstanding stability and durability. Through analysis, NH 2 -MIL-125 (Ti) modified SnS 2 can improve visible light absorption, provide more active sites and inhibit photoelectron-hole recombination, thus enhancing photocatalytic activity . Superoxide radical (•O 2 − ) and hole (h + ) were determined to be the key active substances in the process by the reaction substance capture experiment. The photodegradation mechanism of RhB is also investigated and studied in detail. This novel multiphase SnS 2 /NH 2 -MIL-125 (Ti) material provides a new perspective for the design of organic-inorganic composite photocatalysts with excellent performance and improved stability, and has potential application in environmental purification.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2020
·
IF 7.098
Haojie Zeng,Zongxue Yu,Liangyan Shao,Xiuhui Li,Meng Zhu,Yuchuan Liu,Xiaofang Feng,Ximei Zhu
A novel photocatalytic membrane was prepared by using graphene oxide (GO), UiO-66-NH 2 and Ag 2 CO 3 as basic materials on the surface of PVDF membrane by vacuum filtration self-assembly. The prepared Ag 2 CO 3 @UiO-66-NH 2 /GO (AgCO@UiO/GO) membrane was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The AgCO@UiO/GO membrane possessed the photocatalytic effects, which significantly enhanced the separation effect of dyes and Cr(VI) wastewater. In particular, the AgCO@UiO/GO membrane can achieve complete removal of MB , RB ,MR and Cr(VI) under light conditions maintaining the fluxes during filtration process reach about 50 L · m −2 · h −1 . In addition, after long-time experiments, the AgCO@UiO/GO membrane retained a higher removal rate and maintained a high flux under light conditions than without light for all dyes and Cr(VI). The unique structure of AgCO@UiO/GO membrane with a large number of screening structures and photocatalytic activity resulting a better removal rate for pollutants and reducing membrane fouling . Furthermore, the AgCO@UiO/GO membrane shows a great potential in improving membrane removal performance and a solution to balance trade-off effect.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Liang Shao,Ying Li,Zhonglei Ma,Yang Bai,Jie Wang,Peiyun Zeng,Pin Gong,Fuxiong Shi,Zhanyou Ji,Yang Qiao,Ran Xu,Juanjuan Xu,Guohong Zhang,Caiyun Wang,Jianzhong Ma
Conductive hydrogel-based wearable strain sensors with tough, stretchable, self-recoverable, and highly sensitive properties are highly demanded for applications in electronic skin and human–machine interface. However, currently, hydrogel-based strain sensors put forward higher requirements on their biocompatibility, mechanical strength, and sensitivity. Herein, we report a poly(vinyl alcohol)/phytic acid/amino-polyhedral oligomeric silsesquioxane (PVA/PA/NH2-POSS) conductive composite hydrogel prepared via a facile freeze–thaw cycle method. Within this hydrogel, PA acts as a cross-linking agent and ionizes hydrogen ions to endow the material with ionic conductivity, while NH2-POSS acts as a second cross-linking agent by increasing the cross-linking density of the three-dimensional network structure. The effect of the content of NH2-POSS is investigated, and the composite hydrogel with 2 wt % NH2-POSS displays a uniform and dense three-dimensional (3D) network microporous structure, high conductivity of 2.41 S/m, and tensile strength and elongation at break of 361 kPa and 363%, respectively. This hydrogel is biocompatible and has demonstrated the application as a strain sensor monitoring different human movements. The assembled sensor is stretchable, self-recoverable, and highly sensitive with fast response time (220 ms) and excellent sensitivity (GF = 3.44).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2020
·
IF 7.1
Yunlei Zhou,Yue Wang,Shurong Li,Xi Fang,Huanshun Yin,Po Wang,Shiyun Ai
Photoelectrochemical (PEC) immunosensor was designed to detect N 1 -methyladenosine (m 1 A), where BiVO 4 /g-C 3 N 4 heterojunction was employed as photoactive material, polyamidoamine (PAMAM) and 4-carboxyphenylboronic acid (CPBA) were used as m 1 A antibody immobilization matrix, and Ti-based metal-organic framework encapsulated heterostructure of TiO 2 @NH 2 -MIL-125(Ti) was adopted as signal amplification. Due to the interaction between TiO 2 and phosphate, TiO 2 @NH 2 -MIL-125(Ti) was captured after immunoreaction between m 1 A and its antibody, which can further improve the detection sensitivity with increased PEC response. Under optimal experimental conditions, this method presented wide dynamic range (0.05–35 nM) with the low determination limit (16.7 pM, S/N = 3). This detection strategy showed good detection reproducibility, stability and selectivity. This method was applied to assess the effect of antibiotics on m 1 A content in the leaves, stems and roots of rice seedlings.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2019
·
IF 4.175
Ying Zhang,Jie Xiong,Chao Chen,Qizheng Li,Jingjing Liu,Zhicheng Zhang
The novel humidity sensor , fabricated from inorganic electrolyte doped porous metal-organic framework composite (denoted as LiCl@UiO-66-NH 2 ), is reported in the present work. The humidity sensing properties of LiCl@UiO-66-NH 2 composites have been investigated. The much higher comprehensive sensing properties of composites are obtained in LiCl@UiO-66-NH 2 with 12.5 wt% LiCl. It shows the excellent linearity (R 2 = 0.994) in a broad relative humidity (RH) range. The impedance modulus of LiCl@UiO-66-NH 2 (12.5 wt%) decreases nearly four orders of magnitude from 33% RH to 95% RH at 100 Hz. Besides, the LiCl@UiO-66-NH 2 (12.5 wt%) humidity sensor exhibits fast response (6s) and recovery (18s) speed and excellent long-term stability. The sensing mechanism was discussed through the investigation of complex impedance curves. These results suggest that LiCl@UiO-66-NH 2 have the potential application in humidity sensing. Our work offers a promising strategy for the fabrication of high performance humidity sensors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Chun-Yang Li,Jing-Min Liu,Zhi-Hao Wang,Shi-Wen Lv,Ning Zhao,Shuo Wang
Aflatoxins have been a hot topic in the field related into public health and ecosystem protection, and great effort has been made in developing of adsorptive materials for effective probing the target aflatoxins. Conventional materials, like metal-organic frameworks (MOFs) showed promising application in separation science. However, the cumbersome separation process, competitive adsorption are also major challenges. Regarding this, a novel magnetic micro-composite denoted as Fe 3 O 4 @UiO-66-NH 2 @MON with core-shell structure was constructed. The core of Fe 3 O 4 microspheres was coated with MOFs crystals, and then microporous organic network (MON) was introduced onto the surface of Fe 3 O 4 @UiO-66-NH 2 through a sonogashira coupling reaction. It exhibited good magnetic separation ability, which effectively simplified the pre-treatment steps. The proposed method possessed excellent selectivity and sensitivity, with detection limits in the range of 0.15-0.87 μg L −1 combination with HPLC analysis. More importantly, the MON coating significantly improved the hydro-stability of whole adsorbents, thus enhancing the adsorption efficiency and favoring the practical application of the materials. The developed Fe 3 O 4 @UiO-66-NH 2 @MON-based solid extraction method has been well-applied for real sample analysis, with the recovery of 87.3%–101.8%. We believe the newly-constructed hybrid nano-adsorbents hold great potential in further application in various analytical methods for different target analytes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Shiyu Zhang,Meng Du,Junyan Kuang,Zipeng Xing,Zhenzi Li,Kai Pan,Qi Zhu,Wei Zhou
Mesoporous NH 2 -MIL-125(Ti)@Bi 2 MoO 6 core-shell heterojunctions with surface defects were fabricated through a facile solvothermal method . The mesoporous core-shell structure with a large relative surface area of 87.7 m 2 g −1 and narrow pore size of 8.2 nm extends the photoresponse to the range of visible light due to the narrow band gap of ∼1.89 eV. The visible-light-driven photocatalytic degradation efficiency of highly toxic dichlorophen and trichlorophenol were 93.28 and 92.19%, respectively, and the corresponding rate constants were approximately 8 and 17 times higher than the rates achieved by pristine NH 2 -MIL-125(Ti). The photocatalytic oxygen production rate was increased to 171.3 µmol g −1 . Recycling for several cycles indicates high stability, which is favorable for practical applications. The excellent photocatalytic performance can be ascribed to the formation of the core-shell heterojunctions and to the surface defects that favor charge separation and visible light absorption; the mesoporous structure offers an adequate number of surface active sites and mass transfer. This novel mesoporous core-shell photocatalyst will have potential applications in the environment, and this strategy offers a new insight into fabrication of other high-performance core-shell structure photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2019
·
IF 6.393
Xin Xiong,Yao Zhang,YinFang Wang,HaiFeng Sha,Nengqin Jia
By virtue of the metal organic framework UiO-66-NH 2, an ingenious electrochemiluminescence immunosensor was successfully constructed for subtle exploration of the breast cancer biomarker CA 15-3. In this protocol, Ru(bpy) 3 Cl 2 ·6H 2 O (Ru(bpy) 3 2+ ), as a conventional luminescent reagent, provides a stable and strong luminescent signal. The UiO-66-NH 2 serves as a carrier to provide a large specific surface area for enhancing the electrochemical luminescence signal response of Ru(bpy) 3 2+ . UiO-66-NH 2 , Ru(bpy) 3 2+ are fixed together with Nafion membrane, and CA 15-3 antibody is covalently conjugated onto the membrane through the amide reaction. Ru(bpy) 3 2+ @UiO-66-NH 2 is used as the detection system. The experimental results reveal that the ECL signal decreased obviously after the CA 15-3 antigen molecule is captured on the immunosensor, with the capture of manifesting the principle of electrochemical luminescence quenching detection. Under optimal conditions, the sensor is sensitive and selective for detecting CA 15-3 with the detection range from 5 × 10 −4 to 5 × 10 2 U mL -1 and the low LOD (1.7705 × 10 -5 U mL -1 ). Furthermore, multiple experiments elucidate that the as-prepared sensor could be used for susceptibly detect CA 15-3 in actual samples, which has underlying application prospects in biological analysis.
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2013
·Vol. 19
·期 42
·14279-14285
·
IF 5.831
Dengrong Sun,Yanghe Fu,Wenjun Liu,Lin Ye,Dengke Wang,Lin Yang,Xianzhi Fu,Zhaohui Li
Graphical Higher CO 2 photoreduction activity than previously studied metal–organic framework (MOF) NH 2 -MIL-125(Ti) in the presence of triethanolamine (TEOA) as the sacrificial agent under visible light is exhibited by the amino-functionalized MOF NH 2 -Uio-66(Zr). The photoinduced electron transfer from 2-aminoterephthalate linkers to Zr oxo clusters was revealed for the first time by photoluminescence studies, and the generated Zr III was detected by ESR analysis (see figure). Metal–organic framework (MOF) NH 2 -Uio-66(Zr) exhibits photocatalytic activity for CO 2 reduction in the presence of triethanolamine as sacrificial agent under visible-light irradiation. Photoinduced electron transfer from the excited 2-aminoterephthalate (ATA) to Zr oxo clusters in NH 2 -Uio-66(Zr) was for the first time revealed by photoluminescence studies. Generation of Zr III and its involvement in photocatalytic CO 2 reduction was confirmed by ESR analysis. Moreover, NH 2 -Uio-66(Zr) with mixed ATA and 2,5-diaminoterephthalate (DTA) ligands was prepared and shown to exhibit higher performance for photocatalytic CO 2 reduction due to its enhanced light adsorption and increased adsorption of CO 2 . This study provides a better understanding of photocatalytic CO 2 reduction over MOF-based photocatalysts and also demonstrates the great potential of using MOFs as highly stable, molecularly tunable, and recyclable photocatalysts in CO 2 reduction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Xiao-hu Ma,Si-yuan He,Zhe-rui Zhang,Zhe Meng
Persistent light-emitting materials (PLMs), which have the potential to store and release light energy after light irradiation, are receiving increasing attention for their role in prolonging the lifetime of photogenerated electrons for the development of photocatalysts with round-the-clock applications. In this paper, a double S-scheme Sr 2 MgSi 2 O 7 :Eu 2+ ,Dy 3+ /ZnIn 2 S 4 /UiO-66-NH 2 (SZU) heterojunction with round-the-clock catalytic activity was prepared by hydrothermal self-assembly method. The photocatalytic performance of the SZU heterojunction for RhB(MB) degradation was significantly improved compared with the pristine ZnIn 2 S 4 and UiO-66-NH 2 . The SZU heterojunction has excellent catalytic degradation performance for RhB (MB), and the removal rate of RhB (MB) reaches 72.2 % (81.7 %) after visible light irradiation for 40 (60) minutes. After the end of light, the total removal rate of RhB (MB) reached 86.7 % (96.8 %) when the catalysis continued for several hours under dark conditions, which was 14 % and 15 % higher than that under visible light irradiation, respectively. Based on the characteristics of SMS photoluminescence, combined with a large number of photocatalytic experiments, The sustained photocatalytic activity was enhanced under both daytime and darkness conditions, not only because of the production of SZU complexes, which prolonged the visible light response of ZnIn 2 S 4 , but also because of the construction of double S-scheme heterojunctions, which facilitates the light storage capacity, charge transfer, and the separation of photo-induced charge carriers and effectively promoted the photocatalytic activity of the photocatalysts. This work contributes to a deeper understanding of the design of round-the-clock photocatalysts, and provides a useful exploration for the practical application of photocatalytic technology.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）