SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Peizhang Zhou,Jiang Cheng,Yuanyang Yan,Shouping Xu,Cailong Zhou
Homogeneous hydrophobic ZIF-67 decorated copper mesh was prepared by ultrafast electrodeposition and subsequent hydrophobization with stearic acid or 1-dodecanethiol. The preparation can be completed within 9 min under room temperature. Based on the hard-soft-acid-base (HSAB) theory, there exists difference of the interaction between Co 2+ and specific groups (carboxy or sulfhydryl), the oil/water separation and dyes adsorption performances were thus affected after ZIF-67-coated copper mesh was hydrophobized. The separation efficiency of the hydrophobic meshes for various oil/water mixtures was all greater than 98%, and remained almost no decline after several cycles of separation. However, the intrusion pressure of ZIF-67/copper mesh modified by 1-dodecanethiol is higher than the one modified by stearic acid. At the same time, the 1-dodecanethiol modified ZIF-67/copper mesh displayed a high adsorption capacity for Congo red (near 2000 mg/m 2 ), while the adsorption rate of the mesh modified by stearic acid is significantly faster. This work proposed a simple and fast method to build continuous, homogeneous MOFs film for oil/water separation and dyes adsorption.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2021
·Vol. 22
·期 8
·4279
·
IF 5.924
Hui Li,Xiaoxuan Yu,Fanwei Meng,Zhenyu Zhao,Shuwen Guan,Liping Wang
Ferulic acid (FA) is a naturally-occurring well-known potent antioxidant and free radical scavenger. FA supplementation is an effective strategy to delay aging, but the underlying mechanism remains unknown. In the present study, we examined the effects of FA on lifespan extension and its mechanism of FA inCaenorhabditis elegans(C. elegans). Results suggested that FA increased the lifespan ofC. elegans, rather than altering the growth ofE. coliOP50. Meanwhile, FA promoted the healthspan ofC. elegansby improving locomotion and reducing fat accumulation and polyQ aggregation. FA increased the resistance to heat and oxidative stress through reducing ROS. The upregulating of the expression of thehlh-30,skn-1, andhsf-1were involved in the FA-mediated lifespan extension. Furthermore, FA treatment had no impact on the lifespan ofdaf-2,hlh-30,skn-1, andhsf-1mutants, confirming that insulin/IGF-1 signaling pathway and multiple longevity mechanisms were associated with the longevity mechanism of FA. We further found that mitochondrial signaling pathway was modulation involved in FA-mediated lifespan extension. With the results from RNA-seq results and mutants lifespan assay. These findings contribute to our knowledge of the lifespan extension and underlying mechanism of action of FA inC. elegans.Keywords:ferulic acid;lifespan;stress resistant;insulin/IGF-1;Caenorhabditis elegans
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 138
·期 47
·51416
·
IF 3.125
Wen Ou,Xinjie Luo,Yujun Feng
Polymer or polymer gels have been widely used to control excessive water during oil production by homogenizing injection profile and reducing water cut in the produced fluids. However, the gels used are generally unable to selectively minimize water production, and face the challenge of syneresis of gels under high temperature and high salinity environment. In this work, melamine-formaldehyde sponge was modified with AlCl 3 solution, rendering a transition from hydrophilic to hydrophobic state with a water contact angle of 130° on the surface of the modified product. Filtration results show that mineral oil and water can be selectively separated with the hydrophobically modified sponge powders. Simulated water shutoff experiments demonstrated the blockage efficiency against water was 30% higher than that against oil, and the oil production was increased 7.4% after blocking. The parallel profile control tests confirmed that the fraction flow of high permeable channel decreased about 75%, accompanied with 60% rise of oil recovery factor. These results indicated that such hydrophobic materials can significantly reduce excessive water production, and this work provided a new idea to offer a low-cost hydrophobic material for conformance control and water shutoff during oil production.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2021
·
IF 15.881
Fei-Fei Chen,Zi-Hao Dai,Ya-Nan Feng,Zhi-Chao Xiong,Ying-Jie Zhu,Yan Yu
Cellulose fiber (CF) paper is a low-cost, sustainable, and flexible substrate, which has gained increasing interest recently. Before practical usage, the functionalization of the pristine CF paper is indispensable to meet requirements of specific applications. Different from conventional surface modification or physical mixing methods, we report in situ growth of ultralong hydroxyapatite nanowires (HAPNWs) with lengths larger than 10 μm on the CF paper. HAPNWs are radially aligned on the surface of CFs, creating a micro/nanoscale hierarchical structure. By means of the excellent ion exchange ability of HAP and the hierarchical structure, the functions of the CF paper can be easily customized. As a proof-of-concept, we demonstrate two kinds of functional CF paper: (1) the photoluminescent CF paper by doping Eu3+ and Tb3+ ions into the crystal lattice of HAPNWs and (2) the superhydrophobic CF paper by coating poly(dimethylsiloxane) on the HAPNW hierarchical structure, which can be applied for self-cleaning and oil/water separation. It is expected that an in situ growth of ultralong HAPNWs will provide an instructive guideline for designing a CF paper with specific functions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Zhu Xiong,Zijun He,Sakil Mahmud,Yang Yang,Li Zhou,Chun Hu,Shuaifei Zhao
Long-term efficient separation of highly emulsified oily wastewater is challenging. Reported herein is the preparation of a reinforced superhydrophilic, underwater superoleophobic membrane with demulsification properties using active iron nanoparticles in situ generated on a polydopamine (PDA)/polyethylenimine (PEI)-modified polyvinylidene fluoride (PVDF) membrane surface. A stable zwitterionic structure is fabricated on the membrane surface and provides it with an excellent capability of binding a hydration layer, leading to enhanced superhydrophilic/underwater superoleophobic properties. The interaction between the membrane surface and water is quantified using the relaxation time of water. After iron nanoparticles in situ anchoring, the superhydrophilic, underwater superoleophobic PDA/PEI modified PVDF membrane shows more stable flux behaviors, higher oil separation efficiency, demulsification, and excellent antioil-fouling properties for various anionic, nonionic, and cationic surfactant-stabilized oil-in-water emulsions in a crossflow filtration system. The reinforced hydration layer and the amphoteric charged demusification properties of the membrane play important roles in enhancing the membrane separation performance. The reinforced membrane also exhibits excellent cleaning and reusability performance in long-term operations. The outstanding separation performance, as well as the simple and cost-effective fabrication process of the membrane with various favorable properties, highlight its promise in practical emulsified oily water applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Min Cao,Shu-Liang Li,Jin-Bo Cheng,Ai-Ning Zhang,Yu-Zhong Wang,Hai-Bo Zhao
Elastic biomass aerogels have attracted widespread attention but are seriously hindered by environmentally unfriendly cross-linkers and fire hazards for functional applications. This study outlines the fabrication of a fully bio-based, low fire-hazard and superelastic aerogel without any cross-linkers for excellent thermal insulation and oil absorption, via creating highly oriented wave-shaped layer microstructures and subsequently depositing nonflammable siloxane coating on the surface of the aerogel skeleton. The resultant environmental-safety aerogel showed the combined advantages of anisotropic super-elasticity, hydrophobicity , low density and high flame retardancy (limiting oxygen index value of 42%, UL-94 V-0 rating, and extremely low heat release), thus leading to many benefits for solving environmental hazards. For instance, this fire-safety biomass aerogel can be used as the high-performance thermal insulator with low thermal conductivity and high shielding efficiency. The aerogel also exhibited a great selectively oil clean-up absorption with a high absorption capacity of 117 times its own weight and excellent recyclability . Especially, due to the highly oriented microstructures, the aerogel as a filter showed the fastest separation rates of oil/water mixture (flux rate of 145.78 L h −1 g −1 ) ever reported. Such a method of preparing super-elastic biomass aerogels will provide new insights into their multifunctional applications with high environmental safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Hou-Ying Ma,Yi-Ning Hu,Hao Yang,Li-Jing Zhu,Gang Wang,Zhi-Xiang Zeng,Ling-Hui Wang
Janus membranes (JMs) with asymmetrical wettability have been fabricated by (co)deposition of dopamine and its catechol derivatives on the hydrophobic substrates for oil/water emulsions separation, while it remains to be desired to simplify the preparation processes. Here, poly(vinylidene fluoride) membranes using catechol and polyethyleneimine as the additives were fabricated by non-solvent phase inversion on the non-woven fabric. Hydrophilic polycatechol and polyethyleneimine (PCCh-PEI) aggregates migrated on the top side of the fabricated membranes, improving their hydrophilicity. Furthermore, the hydrophobic back surface with irregular nano/micropores and lots of PVDF spherulites was gained after peeling off the supporting fabric. As a result, the as-prepared Janus membranes showed excellent emulsion separation, stability, and durability, which can potentially be used for unidirectional liquid collection with lossless transportation. This work opens a new and facile way for the fabrication of JMs with asymmetric wettability toward the versatile separation of oil/water emulsions.
✓ 已验证
产品关联
DOI
高影响因子
LAB ON A CHIP
·
2020
·Vol. 20
·期 24
·4600-4610
·
IF 6.774
Hao Wu,Yukun Ren,Likai Hou,Tianyi Jiang,Hongyuan Jiang
Syntactic foams with fly ash cenospheres or commercial microballoons as fillers have been widely used in various applications ranging from aerospace to marine fields and the automotive industry. However, these two extensively adopted fillers possess multiple shortcomings, such as variations in the composition, material degeneration and distinct structural heterogeneity, which will inevitably hamper accurate prediction of the structure–property relationship and the corresponding design of the syntactic foams, reducing material utilization. Here, we present a microfluidic-based approach integrated with a subsequent heat treatment process to engineer syntactic foam fillers with a predefined composition, specified dimensional scope and reduced structural heterogeneity. These fillers are fully guaranteed by the synergy of the flexible and controllable generation of droplet templates with hydrodynamic regulation and rational selection of the nanoparticle dynamic response with respect to the heating temperature. In addition, two distinct surface morphologies have been observed with a temperature demarcation point of 1473 K, further endowing the fillers with multiplicity and optionality, simultaneously laying the foundation to regulate the properties of the syntactic foams through the diversity of the filler selection. Then, we fabricated a syntactic foam specimen by mold casting, and the integrity of the fillers inside was verified using an elaborate buoyancy comparison experiment, exhibiting its potential value in lightweight related applications. As the fillers derived from our approach show significant advantages over conventional ones, they will provide considerable benefits for the regulation and improvement of syntactic foam fillers in many practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Hao Yang,Yi Wang,Shang Fang,Gang Wang,Lijing Zhu,Zhixiang Zeng,Linghui Wang
Janus membrane (JM) with opposite wettability has great potential in separation of oil-in-water (O/W) and water-in-oil (W/O) emulsions. In this work, we have reported a simple, low cost nanocasting/NIPS strategy for preparation of the superhydrophobic and underwater oleophobic surface of JM for the first time. Poly (vinylidene fluoride) (PVDF) and polyethylenimine (PEI) blend membranes were fabricated on PDMS modified non-woven fabric by non-solvent induced phase separation (NIPS) process. Then the as-prepared membranes were further modified with hydrophilic nano-SiO 2 to improve the hydrophilicity of the top surface. Peel off PDMS modified non-woven fabric, parts of PDMS chains were imprinted to the membrane bottom surface with micro-nano three-dimensional microstructures, resulting in superhydrophobic property. The as-prepared JM exhibits an asymmetric wettability with the water contact angle of 35.3° and 151.8° of the opposite surfaces. By changing the orientation of the membrane, oil or water can be filtered respectively. The as-prepared JM shows excellent separation performance for both O/W emulsion and W/O emulsion, the separation efficiency reached 99.72 % and 99.68 %, respectively, as well as good long-term stability. This work is expected to yield a new way to fabricate the superhydrophobic surface of JM.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 8
·4505-4514
·
IF 11.301
Qianqian Yu,Xinda You,Hong Wu,Yanlei Su,Runnan Zhang,Yanan Liu,Chao Yang,Jianliang Shen,Jinqiu Yuan,Zhongyi Jiang
Amphiphobic fluorine materials hold great promise for fabricating self-cleaning membranes. However, the severely impeded water transport in hydrophobic fluorine-based membranes and the weak interaction with the substrate of the low-surface-energy fluorine materials represent two major obstacles for efficient water purification. Herein, we design an ultrathin fluorine-based membrane via coordination-driven metal-bridging assembly. An Fe3+-rich metal–organic layer is constructed on a porous substrate by coordination between polyphosphate ligands and Fe3+ ions, accompanied by the assembly of perfluorosulfonate polymer ligands (Nafion®) via the bridging effect of Fe3+ ions for the metal-bridging fluorine-based membrane (MBFM). By virtue of the flexible modulation of Fe3+ and unique self-assembly of Nafion®, a defect-free 58 nm-thick MBFM featuring an ultrahigh surface fluorine content (47.6 at%) and underwater superoleophobicity (∼160°) is achieved, which displays a superior water permeance of 125.2 L m−2 h−1 bar−1 (2–10 times higher than that of state-of-the-art membranes with dye rejections above 90%) and versatile resistance towards both spreading and non-spreading foulants (flux decline ratios below 8%). This metal-bridging assembly strategy may shed light on advanced membrane fabrication from rationally designed ligands and functional moieties.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 35
·49032
·
IF 2.52
Yupei Xian,Yonggang Shui,Meimei Li,Cunbao Pei,Qiyi Zhang,Yongyi Yao
Plenty of oily wastewater discharged from industrial and domestic sewage has deteriorated the environment severely, so stimuli-responsive membranes with switchable wettability have been of considerable attraction for its potential application in oil/water separation. In this work, a novel pH-dependent thermoresponsive membrane fabricated by grafting the poly[2-(diethylamino)ethyl acrylamide] (PDEAEAM) from the poly(vinylidene fluoride) (PVDF) membrane via surface-initiated atom transfer radical polymerization is explored to achieve the oil/water separation. The PDEAEAM- g -PVDF membrane shows hydrophilicity at room temperature under neutral condition while hydrophobicity at 50°C under alkaline condition. Wettability of the membrane at different temperatures is dominated by the lower critical solution temperature (LCST) of PDEAEAM, and the LCST of PDEAEAM is pH dependent. Due to the LCST of PDEAEAM, the membrane shows a variation of separation efficiency for separating hexadecane/water emulsion with temperature and pH. Typical separation efficiencies are 97.10% at 25°C under neutral condition and 30.26% at 50°C under alkaline condition.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2020
·
IF 3.573
Mingbo Shi,Daiwu Lin,Renliang Huang,Wei Qi,Rongxin Su,Zhimin He
The treatment of multicontaminant wastewater has attracted extensive attention in recent years. Herein, we synthesized a porous and hydrophobic composite (Zr-MOF-SH/MF) via the in situ growth of mercapto-functionalized Zr-metal–organic frameworks (MOFs) (Zr-MOF-SH) on the surface of a melamine formaldehyde (MF) sponge. The successful growth of hydrophobic Zr-MOF-SH, as confirmed by SEM, XRD, and XPS analysis, made the MF sponge become hydrophobic with a water contact angle of 125°. The adsorption capacity of the Zr-MOF-SH/MF composite for dichloromethane can reach up to 113 g/g. Moreover, the composite can efficiently and selectively remove Hg2+ ions from water. Especially, PCN-224-MAA/MF had an adsorption capacity of 412.5 mg/g for Hg2+ ions. The removal efficiency of Hg2+ ions increased as the oil content in the oil–water mixture increased. In addition, PCN-224-MAA/MF can be recovered and reused five times with only a slight decrease in adsorption capacity. This study provides a promising strategy for the synthesis of a dual-functional composite that exhibits excellent performance in removing oil and heavy metal ions simultaneously from water.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）