JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Kun Qi,Hongbo Wang,Xiaolu You,Xuejiao Tao,Mengying Li,Yuman Zhou,Yimin Zhang,Jianxin He,Weili Shao,Shizhong Cui
Highly sensitive wearable textile pressure sensors represent the key components of smart textiles and personalized electronics, with potential applications in biomedical monitoring, electronic skin, and human-machine interfacing. Here, we present a simple and low-cost strategy to fabricate highly sensitive wearable textile pressure sensors for non-invasive human motion and physiological signal monitoring and the detection of dynamic tactile stimuli. The wearable textile sensor was woven using a one-dimensional (1D) weavable core-sheath nanofiber yarn, which was obtained by coating a Ni-coated cotton yarn electrode with carbon nanotube (CNT)-embedded polyurethane (PU) nanofibers using a simple electrospinning technique . In our design, the three-dimensional elastic porous nanofiber structure of the force-sensing layer and hierarchical fiber-bundled structure of the conductive Ni-coated electrode provide the sensor with a relatively large surface area, and a sufficient surface roughness and elasticity. This leads to rapid and sharp increases in the contact area under stimuli with low external pressure. As a result, the textile pressure sensor exhibits the advantages of a high sensitivity (16.52 N −1 ), wide sensing range (0.003–5 N), and short response time (~0.03 s). Owing to these merits, our textile-based sensor can be directly attached to the skin as usual and conformally fit the shape deformations of the body’s complex flexible curved surfaces. This contributes to the reliable real-time monitoring of human movements, ranging from subtle physiological signals to vigorous movements. Moreover, a large-area textile sensing matrix is successfully fabricated for tactile mapping of spatial pressure by being worn on the surface of wrist, highlighting the tremendous potential for applications in smart textiles and wearable electronics .
研究领域:
生物医学工程
·
柔性电子学
·
智能纺织品
·
可穿戴传感器
·
人机交互
·
转化医学
✓ 已验证
DOI
高影响因子
Advanced Energy Materials
·
2017
·Vol. 7
·期 15
·1700087
·
IF 16.721
Ting Jin,Yongchang Liu,Yang Li,Kangzhe Cao,Xiaojun Wang,Lifang Jiao
NaVPO 4 F has received a great deal of attention as cathode material for Na-ion batteries due to its high theoretical capacity (143 mA h g −1 ), high voltage platform, and structural stability. Novel NaVPO 4 F/C nanofibers are successfully prepared via a feasible electrospinning method and subsequent heat treatment as self-standing cathode for Na-ion batteries. Based on the morphological and microstructural characterization, it can be seen that the NaVPO 4 F/C nanofibers are smooth and continuous with NaVPO 4 F nanoparticles (≈6 nm) embedded in porous carbon matrix. For Na-storage, this electrode exhibits extraordinary electrochemical performance: a high capacity (126.3 mA h g −1 at 1 C), a superior rate capability (61.2 mA h g −1 at 50 C), and ultralong cyclability (96.5% capacity retention after 1000 cycles at 2 C). 1D NaVPO 4 F/C nanofibers that interlink into 3D conductive network improve the conductivity of NaVPO 4 F, and effectively restrain the aggregation of NaVPO 4 F particles during charge/discharge process, leading to the high performance.
研究领域:
材料科学
·
电化学
·
纳米技术
·
能源存储
·
无机非金属材料
·
固态化学
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS A-PHYSICAL
·
2021
·
IF 3.407
Wenbo Jiang,Kongsen Hu,Nan Lv,Zhiwei Lyu
Existing piezoelectric sensing materials usually rely on top and bottom planar electrodes to achieve the assembly of piezoelectric sensors , restricting their application due to the limitation of flexibility and miniaturization as well as time-consuming and costly multi-steps preparation. Here, we report a simple strategy to synchronously construct piezoelectric elements and nanoresistance networks via fabricating single PAN/PANI/PVP piezoelectric-conductive nanofibers (NFs) by electrospinning. By virtue of PAN as piezoelectric elements and PANI/PVP as nanoresistance networks, the flexible PAN/PANI/PVP piezoelectric-conductive NFs as an integrated sensing system can timely collect and output voltage based on Wheatstone bridge principle. The pressure sensing potential of flexible PAN/PANI/PVP integrated nanofibers membrane (INFM) is systematically explored and evaluated. The valid contact and adhesion of piezoelectric elements and nanoresistance networks improve effective polarization and collection of induced charges, enhancing piezoelectric output performance. Moreover, it enables the INFM to perceive tiny force with high-precision sensitivity (667 mV N −1 ) down to approximately 0.05 N while retaining a linear relationship. Thus, our research opens a simple route to design integrated sensing materials with nanoscale , high-sensitivity, lightweight and low-cost, making them attractive candidates in the potential application in micro-/nanoscale sensors and wearable electronics .
研究领域:
生物医学工程
·
纳米医学
·
柔性电子学
·
传感器技术
·
可穿戴设备
·
功能材料
·
微纳系统
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2017
·Vol. 44
·期 6
·5842-5847
·
IF 2.986
Lirong Yang,Chunmei Wang,Zhigang Liu,Xiaoyu Liu,Yang Song,Xiaoxin Feng,Baoqiang Zhang
Anatase TiO 2 coatings prepared by solvothermal process in a neutral ethanol solution of isopropyl titanate at 160 °C have been grown on slag wool fibers (SWF) which were modified by hexadecyltrimethylammonium bromide (CTAB) in advance. X-ray diffraction patterns confirmed the coatings are of a nanocrystalline anatase structure, and scanning electron microscopy observations and energy-dispersive X-ray spectrum revealed a continuous coverage of TiO 2 formed on the fiber surfaces. The photocatalytic activity of the samples was tested by the photocatalytic degradation of methylene blue (MB) solution. The results show that CTAB modified slag wool fibers (CMSWF) are not a suitable adsorbent for MB due to their weaker negative surface charges. Anatase TiO 2 coated CMSWF display higher photocatalyst activity than anatase TiO 2 coated SWF without CTAB modification, and Anatase TiO 2 coated CMSWF are relatively stable under UV-light irradiation.
研究领域:
材料科学
·
环境功能材料
·
表面改性
·
光催化
·
纳米涂层
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2019
·
IF 3.413
Shuzhen Yang,Yanfang Huang,Shengpeng Su,Guihong Han,Jiongtian Liu
A hybrid water-soluble humics-based binder (humics/sodium carboxymethyl cellulose (CMC)) was studied to enhance the electrochemical performance of a Li-ion battery cathode (LiFePO 4 ) in this work. Molecular dynamics simulations of binder active fractions with related materials (LiFePO 4 and Al) were performed to explore the binding mechanisms. Humics serve to connect the active material and provide a conducting bridge in the cathode. To improve the adhesion between the particles and current collector, CMC is added as an auxiliary fraction with a mass ratio of humics to CMC of 3:1. The scanning electron microscope results indicate that the morphology of the electrode with the hybrid humics/CMC binder is more uniform than that of electrodes with conventional polyvinylidene fluoride and CMC binders. The electrochemical performance and cycling stability of the cathode materials are obviously enhanced. The reversible specific capacity can reach 152.3 mAh g −1 at 0.5 °C after 100 cycles. The rate capability is greatly improved, with a specific capacity as high as 105 mAh g −1 at 8 °C. The humics/CMC composite can be regarded as a novel, environmentally friendly and high-efficiency binder for application in Li-ion batteries.
研究领域:
电化学
·
材料科学
·
能源存储
·
纳米材料
·
可持续能源技术
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2020
·
IF 6.215
Yuexiu Du,Chongwu Liu,Yunzhao Liu,Qi Han,Xiaowei Chi,Yu Liu
Rechargeable metal batteries are desirable for next-generation high specific energy electrochemical energy storage systems . However, low coulombic efficiency and severe dendrite growth during the stripping/plating of metals (e.g. Li, Na, Zn and etc.) considerably hinder their practical applications. To address the above issues, in this work, a facile, versatile, and scalable approach by means of spray depositing carbon fiber micron film (CFMF) onto metals is developed. The porous, uniform, and highly conductive CFMF firmly attached to metal surface with a scaffold structure is found to effectively guide the uniform plating/stripping of both the Zn metal in aqueous electrolytes and the Li metal in organic electrolytes, thus enabling much higher efficiencies of Zn (98.4%) and Li (99.7%) for the 100th cycle on the CFMF-modified current collectors than those of bare current collectors. And the so far record high cycling stability for the symmetric cells using CFMF/Zn (2500 h) and CFMF/Li (1000 h) electrodes is achieved at 1 mA cm −2 and 4 mA cm −2 , respectively. Benefiting from the delicately designed CFMF-modified Zn or Li metal anodes , the full cells of Zn–MnO 2 and Li–LiMn 2 O 4 are rendered excellent rate capability and significantly extended cycle life.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米技术
·
电池技术
✓ 已验证
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2018
·
IF 2.955
Yuhua Dong,Siyi Li,Qiong Zhou
The self–healing capability of epoxy coatings modified with coaxial core–shell nanofibers loaded with the corrosion inhibitor 2–mercaptobenzothiazole (MBT) was investigated using electrochemical techniques. The polyvinyl alcohol/polyvinylidene fluoride core–shell nanofibers were prepared by coaxial electrospinning. Electrochemical impedance results showed that the MBT–loaded coaxial nanofibers improved the barrier properties and decreased the corrosion activity of the coatings. Results of the Scanning Kelvin Probe technique revealed that the MBT–loaded coaxial nanofibers healed corrosion over artificial defects exposed to NaCl electrolytes. These results indicate that adding MBT–loaded coaxial nanofibers to epoxy coatings is a promising strategy toward the development of self–healing epoxy coatings.
研究领域:
材料科学
·
高分子化学
·
腐蚀与防护
·
表面工程
·
功能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 65
·52382-52387
·
IF 3.84
Minxia Li,Xiaowei Wang,Yanfang Wang,Bingwei Chen,Yuping Wu,Rudolf Holze
A new composite gel polymer electrolyte of nonwoven fabric (NWF) and methyl cellulose (MC) with good mechanical properties and outstanding thermal and electrochemical stability is prepared by a simple and green casting process followed by absorbing liquid electrolyte. Its characteristics are investigated by scanning electron microscopy, FT-IR, thermogravimetric analysis (TGA). Due to the synergistic action between MC matrix and the NWF framework, the composite gel polymer electrolyte achieves higher ionic conductivity (0.29 mS cm−1) at ambient temperature and larger lithium ion transference number (0.34) than those for the conventional Celgard 2730 separator (0.21 mS cm−1 and 0.27, respectively) in 1 mol L−1 LiPF6 electrolyte, and their activation energies are similar. In addition, the composite membrane shows better mechanical strength than the pure MC membrane. The evaporation rate of the liquid electrolyte at elevated temperature is much decreased. The assembled Li//LiFePO4 cell using this composite gel membrane exhibits better cycling retention and higher discharge capacity than those based on Celgard 2730 separator and pure MC gel membrane. These fascinating characteristics suggest that this unique composite gel polymer electrolyte can be used for lithium ion batteries with good performance and low cost.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子材料
·
电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Xiaofei Liu,Jian Wang,Zhonghui Shen,Hongjian Zhang,Baowen Li,Yong Zhang,Xin Zhang
Flexible organic/inorganic piezoelectric nanocomposites are highly demanded for flexible wearable electronic devices due to their excellent mechanical flexibility and high piezoelectric performance. However, the output performance of ceramic-polymer-based piezoelectric nanogenerators (PENGs) is restricted by the poor electrical conductivity of the organic matrix and the distinct discrepancy in mechanical strength between inorganic filler and organic matrix. Herein, we propose a flexible piezoelectric polymer nanocomposite based on CNTs@PZT nanofibers (NFs) network where the carbon nanotubes (CNTs) were introduced into the piezoelectric lead zirconate titanate (PZT) NFs to simultaneously improve the electrical conductivity and mechanical strength of nanocomposites. When subjected to a periodical bending deformation , the CNTs@PZT NFs network-based PENG with optimal addition of CNTs (0.6 wt%) generates a maximum electrical output up to ∼12.5 V and ∼80 nA cm −2 which is four times higher than that of PENGs without CNTs doping. An ultrahigh power density of 91.7 nW cm −2 is obtained with an external load resistance of 40 MΩ when pressed via a 10 N compressive force , and furthermore, the generated power could charge a capacitor and further light a commercial LED. This work may pave a new way for the development of high-output nanocomposite-type PENGs.
研究领域:
材料科学
·
纳米科技
·
能源材料
·
柔性电子学
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2012
·Vol. 378
·期 1
·30-35
·
IF 3.07
Shangkun Li,Xiaofeng Lu,Xiang Li,Yanpeng Xue,Chengcheng Zhang,Junyu Lei,Ce Wang
A reactive-template vapor phase polymerization method for the preparation of bamboo-like polypyrrole (PPy) nanotubes has been successfully demonstrated in this paper. Herein, electrospun V 2 O 5 nanofibers were chosen as templates to deposit PPy, which served as the oxidants as well. This method can provide the fabrication of PPy nanostructures more easily than conventional routes due to its independence of removing template, which is usually a complex and tedious experimental process. The application of bamboo-like PPy nanotubes for Cr(VI) ions removal in aqueous solution has been explored. The resulting bamboo-like PPy nanotubes exhibited much higher adsorption performance than traditional PPy nanoparticles.
研究领域:
环境科学
·
纳米材料
·
高分子化学
·
环境污染治理
·
吸附技术
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2012
·
IF 3.832
Pingfan Du,Lixin Song,Jie Xiong,Ni Li,Zhenqiang Xi,Longcheng Wang,Dalai Jin,Shaoyi Guo,Yongfeng Yuan
Novel TiO 2 /ZnO core–sheath nanofibers (NFs) film was fabricated through an extraordinary coaxial electrospinning technique . Dye-sensitized solar cells (DSSCs) were assembled using the TiO 2 /ZnO NFs film as photoanode . FESEM , TEM, FTIR , XRD , XPS and UV–vis were used to characterize the NFs electrode film. Photocurrent–voltage ( I – V ) characteristic, incident photo-to-current conversion efficiency (IPCE) spectrum, and electrochemical impedance spectroscopy (EIS) measurements were performed to evaluate the DSSCs performance. The results reveal that the DSSCs based on the TiO 2 /ZnO core–sheath NFs are superior to their bare TiO 2 NFs-based counterparts. Compared with the latter, the overall energy conversion efficiency was enhanced from 4.47 to 5.17%. And the possible mechanism for this enhancement was discussed.
研究领域:
材料科学
·
纳米技术
·
能源材料
·
光电化学
·
半导体薄膜
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Zuocheng Luo,Qingfeng Zhang,Wei Xie,Tong Yuan,Qisheng Zang,Ning Wang,Hanxiao Fan,Shuhong Xie,Xiaoping Ouyang
Potassium ion hybrid capacitors (PIHCs) have attracted widespread attention as combining the advantages of potassium ion batteries (PIBs) with supercapacitors . However, the sluggish kinetics caused by the large radius of K + hinder the practical application of PIHCs. Herein, we synthesized a boron and fluorine co-doping interlaced network porous carbon nanofibers (BF-PCNFs), which was used as the freestanding anode of PIHCs the freestanding anode of PIHCs to alleviate large volume expansion and increase conductivity. Benefiting from the B, F co-doping and porous interlace nanostructure of BF-PCNFs, the anode shows 185 mA h g −1 under a load of 12.6 mg cm −2 , a reversible capacity of 176 mA h g −1 at 1000 mA g −1 after 6000 cycles, and the capacity retention from 100 mA g −1 to 5000 mA g −1 is 62%. Furthermore, the PIHCs based on BF-PCNFs as anode and activated carbon as cathode exhibit an energy density of 87 Wh kg −1 and a power density of 393 W kg −1 . The capacity retention is as high as 78% over 4000 cycles. Considering the exceptional rate performance, long cyclability and high-mass-loading, our work may supply a new strategy for designing novel energy storage devices with outstanding performance.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米科技
·
功能材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）