RARE METALS
·
2020
·Vol. 40
·期 7
·1940-1948
·
IF 2.161
Li Jia-Xin,Chen Yu-Hong,Bai Zhang-Jun,Zhao Bao-Jun,Jiang Liang,Wu Lan-Er
Ta–W alloys have unique properties but their applications at high temperatures are restricted due to their poor oxidation resistances. The addition of Al and Ti decreases the oxidation rate of the alloy, as Al-contained protective oxide layer could be formed. In this study, ternary and quaternary Ta–W alloys containing Al and Ti were prepared by hot press sintering. The microstructures and oxidation behaviors of the alloys were studied at 1173 K. The results show that the oxidation kinetics of all alloys follows a parabolic law at short oxidation periods. After cyclic oxidation, the kinetics of quaternary alloys still obeys the parabolic law but that of ternary alloy has been changed into linear law kinetics after 8-h oxidation. For ternary alloy, an outer layer with dense and continuous alumina was formed during the initial stage, and phase transformation caused the oxides to peel off. By comparison, the quaternary alloys depicted continuously solid solution of the oxides layer. Overall, Al and Ti played key roles in oxidation degree and affected the oxidation kinetics of ternary and quaternary alloys.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Oceanology and Limnology
·
2020
·Vol. 38
·期 5
·1517-1531
·
IF 0.617
Tian Jing,Chen Zhuoyuan,Jing Jiangping,Feng Chang,Sun Mengmeng,Li Weibing
The Cu 2 O/TiO 2 p-n heterojunction composite photoelectrodes were prepared by depositing Cu 2 O nanoparticles on the surface of TiO 2 nanotubes via anodic oxidation and constant current deposition. Field emission scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) analyses showed that Cu 2 O nanoparticles not only deposited on the surface of TiO 2 nanotube array, but also on the wall of TiO 2 nanotubes. The Cu 2 O deposition amount could be adjusted by changing the deposition time. The photoelectrochemical cathodic protection (PECCP) performance of the prepared photoelectrodes for 316L stainless steel (SS) was tested under visible light. The constant current deposition time had a significant effect on the PECCP performance of Cu 2 O/TiO 2 -X photoelectrodes and Cu 2 O/TiO 2 -20 had the best PECCP performance for the coupled 316L SS. This was attributed to the appropriate amount and thickness of Cu 2 O to form p-n heterojunctions with TiO 2 , in which separation of the photogenerated carriers was accelerated and transfer of the photogenerated electrons to 316L SS for PECCP was facilitated.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2020
·
IF 3.442
Hui Yong,Xin Wei,Yanhao Wang,Shihai Guo,Zeming Yuan,Yan Qi,Dongliang Zhao,Yanghuan Zhang
To improve hydrogen storage property of Mg-based alloy, the Mg–Ce–Y–Ni + 10 wt % M (M = Zr, Ti, V) composites were prepared by the combination of alloying and ball-milling, and their microstructure, phase evolution, as well as hydrogen storage thermodynamic and kinetic properties, were investigated by XRD , PCT, and DSC methods. The result shows that the hydrogenated samples are composed of MgH 2 , Mg 2 NiH 4 and corresponding ZrH 2 , TiH 2 and VH 1.9 phases. In comparison, the |Δ H| value of M = Ti sample is larger than that of M = Zr and M = V samples, and the M = Ti sample has the highest the peak temperatures and lowest plateau pressure, which indicates that Zr and V elements are more efficient to reduce the thermodynamic stability of RE-Mg-Ni hydrogen storage alloys. Besides, the DSC curve of the M = V sample has another endothermic peak which corresponds to the decomposition reaction between VH 1.9 and VH 0.8 , which has a contribution to desorption kinetic property for the M = V sample. The apparent activation energies ( E de ) show an increasing trend in the following order: M = Zr (87.7 kJ/mol) < M = V (89.1 kJ/mol) < M = Ti (99.3 kJ/mol).
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2021
·
IF 3.498
Zifan Li,Zhibin Zhang,Zhimin Dong,Yongchuan Wu,Xiang Zhu,Zhongping Cheng,Yuhui Liu,Yingcai Wang,Zhijian Zheng,Xiaohong Cao,Youqun Wang,Yunhai Liu
The separation of uranium U(VI) through photoreduction approach has attracted substantial attention. Sulfide-based materials have revealed excellent performance for reducing U(VI) and there is no record of CuS based materials. Herein, we synthesized CuS/TNTAs heterostructured nanocomposites (CUTN) with varied CuS contents via successive ionic layer adsorption and reaction (SILAR) method. After SILAR deposition for 10 times, CUTN-10 showed the best photocatalytic performance, and 92.6 % of U(VI) can be removed within 180 min. The CuS could provide sufficient photoelectrons and TNTAs can transport these photoelectrons to the adsorbed U(VI) on its surface, the reduced uranium sediment was proved to be (UO 2 ) O 2 ·2H 2 O. More important, the combination of TNTAs could effective inhibit photocorrosion of CuS and the leaching of Cu 2+ was relatively low. We also unconsciously found that CUTN-10 can photoreduce U(VI) without any sacrificial agent which caused by the oxidation of S 2− . This work expands the application of sulfide-based materials and provides basic data for bracing the expansion of sulfide-based materials in the field of U(VI) photoreduction.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Lei Liu,Ziqiang Cheng,Bei Jiang,Yanxin Liu,Yanli Zhang,Fan Yang,Jiahong Wang,Xue-Feng Yu,Paul K. Chu,Cong Ye
The memristor is a foundational device for an artificial synapse, which is essential to realize next-generation neuromorphic computing. Herein, an optoelectronic memristor based on a two-dimensional (2D) transitional-metal trichalcogenide (TMTC) is designed and demonstrated. Owing to the excellent optical and electrical characteristics of titanium trisulfide (TiS3), the memristor exhibits stable bipolar resistance switching (RS) as a result of the controllable formation and rupturing of the conductive aluminum filaments. Multilevel storage is realized with light of multiple wavelengths between 400 and 808 nm, and the synaptic properties such as conduction modulation and spiking timing-dependent plasticity (STDP) are achieved. On the basis of the photonic potentiation and electrical habitual ability, Pavlovian-associative learning is successfully established on this TiS3-based artificial synapse. All these results reveal the large potential of 2D TMTCs in artificial neuromorphic chips.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Xiaoming Wang,Qianqian Peng,Xilin Zhang,Xucheng Lv,Xin Wang,Yongzhu Fu
Refractory high-entropy alloy nanocomposites (HEA-NPs) are important class of materials with unique structure and potential applications. Although several synthetic methods have been reported, developing novel routes to prepare nanoscale HEA-based catalysts facilely is still urgently desired. This work takes advantage of confinement assisted arc and plasma shock (APS) to prepare a series of HEA-NPs by regulating the type and proportion of metal precursors. The phase constitutes and morphology of the HEA-NPs are fully characterized. The prepared refractory HEA-NPs possesses five highly dispersed metal components, including titanium (Ti), niobium (Nb), tantalum (Ta), chromium (Cr), molybdenum (Mo) and simultaneously exhibits an uniform hexagonal morphology of nanocrystals . By taking advantage of its unique corrosion resistance , TiNbTaCrMo HEA-NPs can function as a promising candidate for electrocatalytic hydrogen evolution reaction (HER) in natural seawater . And its catalytic performance after alloying is significantly enhanced compared with the elemental metal. Theoretically, the promoted HER activity can be attributed to the strong adsorption for the various metal components in HEA-NPs caused by the upshifting d -band center close to the Fermi level . Furthermore, this confinement strategy can be further extended to synthesize other HEA-NPs. Our strategy provides a novel method to synthesize various HEA-NPs for further catalytic application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2021
·Vol. 17
·期 40
·2103239
·
IF 13.281
Yanhong Duo,Guanghong Luo,Zihuang Li,Zide Chen,Xianming Li,Zhenyou Jiang,Binlu Yu,Hao Huang,Zhengbo Sun,Xue-feng Yu
Nanomaterial-based photothermal and photocatalytic therapies are effective against various types of cancers. However, combining two or more materials is considered necessary to achieve the synergistic anticancer effects of photothermal and photocatalytic therapy, which made the preparation process complicated. Herein, the authors describe simple 2D titanium diselenide (TiSe 2 ) nanosheets (NSs) that can couple photothermal therapy with photocatalytic therapy. The TiSe 2 NSs are prepared using a liquid exfoliation method. They show a layered structure and possess high photothermal conversion efficiency (65.58%) and good biocompatibility. Notably, upon near-infrared irradiation, these NSs exhibit good photocatalytic properties with enhanced reactive oxygen species generation and H 2 O 2 decomposition in vitro. They can also achieve high temperatures, with heat improving their catalytic ability to further amplify oxidative stress and glutathione depletion in cancer cells. Furthermore, molecular mechanism studies reveal that the synergistic effects of photothermal and enhanced photocatalytic therapy can simultaneously lead to apoptosis and necrosis in cancer cells via the HSP90/JAK3/NF-κB/IKB-α/Caspase-3 pathway. Systemic exploration reveals that the TiSe 2 NSs has an appreciable degradation rate and accumulates passively in tumor tissue, where they facilitate photothermal and photocatalytic effects without obvious toxicity. Their study thus indicates the high potential of biodegradable TiSe 2 NSs in synergistic phototherapy for cancer treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Yefeng Feng,Peiyao Chen,Bingshuang Mao,Maolin Bo,Qihuang Deng
Ultrahigh dielectric constant is obtained in polymer/MXene composites due to percolation . However, huge dielectric loss is triggered owing to high leakage current . In this work, hybrid filler consisting of Ti 2 C MXene and ZrO 2 was prepared for coordinating high dielectric constant and low dielectric loss in composites. Instead of Ti 2 C percolation, Ti 2 C/ZrO 2 interface effect mildly increased dielectric constant. Ultrahigh insulation and large aspect ratio of ZrO 2 fibers significantly reduced dielectric loss. Binary polymer/Ti 2 C and ternary polymer/Ti 2 C-ZrO 2 composites were fabricated, and better overall electric traits in ternary system were found. Ti 2 C/ZrO 2 interface effect was studied using density functional theory (DFT) calculations. Ternary composite with 12 wt% filler exhibited high dielectric constant of ~40, low dielectric loss of ~0.09 at 100 Hz and high breakdown strength of ~155 MV m −1 . This work might impulse fabrication of MXene-based hybrid fillers for dielectrics.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2021
·
IF 6.024
Yiming Zhang,Yubing Si,Wei Guo,Xiang Li,Shuai Tang,Zhaoxin Zhang,Xin Wang,Yongzhu Fu
The practical application of lithium–sulfur batteries (LSBs) is partially impeded by large volume variation, severe shuttle effect, and inferior electrical conductivity of sulfur. On this account, a template-free arc-discharge method for the synthesis of TiSx (1.5 < x < 2)@HCN (hollow carbon nanocage) as an efficient sulfur host is developed for LSBs. TiSx@HCN can accommodate the volume changes of active materials and inhibit the shuttle effect of lithium polysulfides (LiPSs). Theoretical calculation shows that the defective titanium sulfide accelerates the conversion of long-chain LiPSs to intermediate species and promotes the redox reactions. As a consequence, the resulting hybrid cathode composited with sulfur exhibits excellent electrochemical performances. A reversible capacity of 1118.6 mA h g–1 is obtained under 0.1 C with a slow capacity decay of 0.108% per cycle for 200 cycles. The synthetic strategy provides a facile platform for the synthesis of nanocomposite materials.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Xiaoqing Bin,Yapeng Tian,Yangyang Luo,Minhao Sheng,Yijia Luo,Maomao Ju,Wenxiu Que
In order to obtain high-performance flexible electrodes for supercapacitors, the nitrogen-doped delaminated-Ti 3 C 2 T x (N-d-Ti 3 C 2 T x ) decorated with MoO x nanoparticles (N-d-Ti 3 C 2 T x /MoO x ) films are prepared by a one-step solvothermal method. The N-d-Ti 3 C 2 T x nanosheets with high conductivity can facilitate electron transfer during the charge and discharge process, and the MoO x nanoparticles can contribute to high pseudocapacitance. Hence, their combination is expected to not only inhibit N-d-Ti 3 C 2 T x nanosheets from re-stacking, but also enhance the specific capacity of the whole electrode. Here, benefiting from the synergistic effect of the two components, the obtained optimal flexible and free-standing N-d-Ti 3 C 2 T x /MoO x film electrode delivers an ultrahigh capacity of 341.0 C g −1 (920.6 C cm −3 , 487.1 F g −1 , 1315.2 F cm −3 ) at the scan rate of 2 mV s −1 , and shows superior capacity retention of 99.2% after 11000 cycles at the current density of 5 A g −1 . Moreover, the flexible and free-standing N-d-Ti 3 C 2 T x /MoO x film electrode is also beneficial to promote the development of flexible supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Energy
·
2019
·
IF 0
Zhiguo Hou,Xueqian Zhang,Huaisheng Ao,Mengke Liu,Yongchun Zhu,Yitai Qian
The narrow electrochemical stability window (1.23 V) of electrolyte has hindered the development of aqueous sodium ion batteries greatly, especially the choice of electrode materials. Here, through theoretical calculation and experimental proof, it's found that the deposition of oxide films on both Al cathode and Ti anode current collectors exhibits strong passivation effect. When the thickness of Al 2 O 3 film on Al is about 3 nm and the thickness of TiO 2 film on Ti is about 5 nm, the electrochemical stability window of aqueous electrolyte can be expanded to 3.5 V. Therefore, TiS 2 with low working potential (1.5 V versus Na + /Na) can be used as anode material in aqueous sodium-ion battery for the first time. We assembled a full cell coupling TiS 2 anode with Prussian blue cathode in 15 M NaClO 4 aqueous electrolyte. The full cell of 2.6 V demonstrates cycle life up to 1000 times with high energy density (100 Wh kg −1 ) and high rate capability (30 C).
✓ 已验证
产品关联
DOI
Progress in Natural Science-Materials International
·
2019
·
IF 3.31
Xinyang Jiao,Xiaoping Cai,Gao Niu,Xuanru Ren,Xueqin Kang,Peizhong Feng
Porous TiAl 3 intermetallics were synthesized from Ti-75 at.% Al elemental powder mixtures using an energy-saving and rapid reactive method of thermal explosion (TE). The results demonstrated that the actual temperature of the compact climbed rapidly from 673 °C to 1036 °C within 24 s, indicating that an obvious TE reaction occurred during sintering process. The video graphs suggested that the TE in Ti–Al system behaved instant occurrence and overall heating whether from axial or radial direction. The silver wires and NaCl particles that pressed on the surface of the sample disappeared due to the heavy heat released during TE reaction. Only pure TiAl 3 phases were synthesized in TE products and the open porosity of 55.4% was easy to obtain. After high-temperature treatment at 1000 °C, large amounts of sintering-neck formed and then improved the compressive strength of porous TiAl 3 materials. Moreover, the mass gain curve of porous TiAl 3 intermetallics oxidized at 650 °C for 120 h exhibited the parabolic oxidation rate law. XPS analysis confirmed that the strong O 1s peak was 531.4 eV which was the typical binding energy of Al 2 O 3 . Therefore, the excellent oxidation resistance of porous TiAl 3 foams would be considered as good candidate materials for prolonging the service life at high temperatures.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）