JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2020
·Vol. 103
·期 9
·5013-5027
·
IF 3.502
Yongbao Xiao,Yao Ji,Yichen Ye,Shujing Huang,Weichao Wang
Alkali-earth-metaphosphate-based fluoro-sulfo-phosphate M(PO 3 ) 2 –AlF 3 –MSO 4 (MPFS, M = Ca, Sr, Ba) glasses have been developed via simultaneously incorporating fluoride and sulfate into metaphosphate glass. Their glass-forming regions were efficiently determined under the guidance of thermodynamic calculation method. The physical and structural properties of BaPFS glass were investigated in detail. Furthermore, near-infrared spectroscopic properties of Er 3+ -doped BaPFS (Er–BaPFS) glass were studied. Physical parameters, such as Abbe's number ν d (55-75) and nonlinear refractive index n 2 (1.17-1.86 × 10 −13 esu), of BaPFS glass are strongly depended on P/F/S ratio. The structure of BaPFS glass gradually depolymerizes and tends to become multianionic when Ba(PO 3 ) 2 is substituted by AlF 3 and BaSO 4 . Anion-substitution strategy effectively modulates the property and structure of glass, providing a scheme to derive glass materials. In addition, enhanced emission at ~1.5 μm has been observed from Er–BaPFS glass along with large emission cross section (5.0-5.5 × 10 −21 cm 2 ) and long lifetime (6.7-7.3 ms), resulting in large figure of merit (3.46-3.84 × 10 −23 cm 2 ·s), which is a promising candidate for solid-state laser.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 35
·19930-19939
·
IF 3.049
Panqi Huang,Jingfei Luan
The effects of Ba-doping on the structure and photocatalytic performance of GaOOH were investigated for the first time in this paper. XRD, SEM, TEM, XPS, UPS, FT-IR, UV-Vis DRS, PL, BET and EPR characterizations were carried out to analyze the properties of Ba-doped GaOOH. The results showed that GaOOH crystallized well with the orthorhombic crystal system with space group Pbnm. The lattice parameters of GaOOH were found to be a = 4.509526 Å, b = 9.771034 Å and c = 2.969284 Å. The transition in the structural morphology of GaOOH before and after Ba-doping was observed in SEM pictures in which the morphology of GaOOH varied from wood-like to rice husk-like. At the same time, the specific surface area of 4 wt% Ba-doped GaOOH (21.5854 m2 g−1) was 3.42 times that of pure GaOOH (6.3047 m2 g−1). Ba-doping caused a red shift of the band gap according to UV-Vis DRS results. The enhanced defect states caused by Ba-doping was confirmed by PL results, which decreased the recombination rate of photogenerated electrons and photogenerated holes. Compared with pure GaOOH, when GaOOH with different Ba content was used as photocatalyst, the removal rate of enrofloxacin was increased by more than 20% only by illumination for 60 min. In addition, Ba-doped GaOOH had excellent stability and could be reused, which could reduce costs and increase the potential of its practical application.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2015
·
IF 2.752
Na Zhao,Siwen Li,Xin Zhang,Xinyue Huang,Jinyi Wang,Ruimin Gao,Jianshe Zhao,Junlong Wang
Photocatalytic oxidative desulfurization of dibenzothiophene (DBT) with H 2 O 2 (30%) and Ag/ALa 4 Ti 4 O 15 (A = Ca, Sr and Ba) as the photocatalysts were studied. Ag cocatalyst-loaded ALa 4 Ti 4 O 15 (A = Ca, Sr and Ba) were synthesized by incipient wetness. Reaction time, temperature and the amount of hydrogen peroxide were investigated as the important parameters for optimization of the reaction and a potential removal mechanism of photocatalytic oxidation was proposed. Ag (2 wt%)/CaLa 4 Ti 4 O 15 and Ag (1 wt%)/BaLa 4 Ti 4 O 15 were found to give remarkable catalytic activity and high selectivity for catalytic experiments. Actually, 99.0% and 98.0% of DBT were converted respectively according to the desulfurization tests. Moreover, these two catalysts were characterized by infrared spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray photoelectron spectrum (XPS).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2016
·
IF 2.632
Huijing Li,Junjie Yuan,He Qian,Limin Wu
In this study, we have successfully introduced siloxane monomer, 2,4,6,8-Tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane (V 4 ) into the shell of silica/poly(methyl methacrylate-butyl acrylate) (SiO 2 /P(MMA-BA)) core–shell nanocomposite colloids via in-situ emulsion copolymerization. The obtained nanocomposite films with 50% silica content all show excellent transparency (nearly 100% transmittance in visible range) and film-forming property (T g under 30 °C). More importantly, the addition of V 4 can significantly increase the weathering durability of the film by improving the water repellency, cross-linking degree and UV-blocking property of the film.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2023
·
IF 8.6
Yu Chen,Zhiyu Yang,Jiance Jin,Jianwei Qiao,Yuzhen Wang,Maxim S. Molokeev,Hendrik C. Swart,Zhiguo Xia
Exploring oxide-based red-emitting phosphors is essential for improving the color rendering index (Ra) and reducing the correlated color temperature (CCT) of white-light-emitting diode (LED) lighting sources. Especially, it is challenging to design Eu2+ red emission in inorganic solids. Here, the Eu2+-activated oxide phosphor Sr2LaGaO5:Eu2+ was synthesized with red emission peaking at 618 nm under 450 nm excitation. The crystal structure and spectral analysis indicate that Eu2+ tends to occupy [Sr1/LaO8] polyhedrons with a smaller coordination number, resulting in a large crystal field splitting at the 5d level and realizing the broadband 4f–5d red emission. When Sr is substituted by Ba atoms, density functional theory calculations verify that Ba tends to enter [Sr2O10] with a large coordination number, further giving rise to the lattice distortion and a giant spectral redshift (618–800 nm). The white LED device fabricated by mixing red Sr1.8Ba0.2GaO5:Eu2+ and green Lu3Al5O12:Ce3+ phosphors exhibits a high color rendering index (Ra = 92.1) and a low color-dependent temperature (CCT = 4570 K). This study will give guidance for exploring new Eu2+ activated oxide-based red phosphors as well as achieving tunable emission through cations’ substitution.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
AQUACULTURE RESEARCH
·
2021
·Vol. 52
·期 7
·2963-2979
·
IF 2.082
Qin Ni,Chunfang Cai,Shengjie Ren,Junbiao Zhang,Yijun Zhao,Xinyi Wei,Yiyang Ge,Chengrui Wang,Wenjian Li,Ping Wu,Yuantu Ye,Xiamin Cao
This study aimed to reveal the impact of excessive dietary fibre (DF) intake on inflammatory responses and bile acid (BA) homeostasis in largemouth bass ( Micropterus salmoides ) and the potential mechanism. In vitro BA binding capacity was compared, and the results showed that the BA binding capacity to chenodeoxycholic acid and glycocholic acid by pectin and soybean meal was higher than cellulose and cottonseed meal respectively. An in vivo trial was conducted using a diet without DF as a control (CON diet), while test diets contained 150 g/kg cellulose (CEL diet) or pectin (PEC diet), 500 g/kg soybean meal (SBM diet) or cottonseed meal (CSM diet). Fish were overfed and ate ad libitum . Compared to fish fed the CON diet, fish fed the PEC and SBM diets showed high expression of inflammatory factor genes and BA synthesis factor genes and obvious histopathological damage in the gut and liver, while the responses of fish fed the CEL and CSM diets were mild. Whole-body BA contents in fish fed all test diets were lower than those in fish fed the CON diet ( p < 0.05). These results support the hypothesis that excessive DF intake induces inflammatory responses and dysregulation of BA homeostasis, which might be attributed to their binding capacity to BAs.
研究领域:
水产养殖
·
营养学
·
分子生物学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2023
·
IF 3.3
Yingguang Li,Mingwei Fu,Peng Qiao,Shulian Liu,Degang Deng,Shiqing Xu,Hongping Ma
In this study, a non-activated ion-doped full-spectrum emission phosphor for white light-emitting diode (WLED) lighting is proposed using oxygen defect engineering. The YMZn 3 AlO 7 (M = Ca, Sr, Ba) phosphors with "114″ structure were prepared via a high-temperature solid-state reaction. Under excitation with 373 nm ultraviolet (UV) light, YSrZn 3 AlO 7 in YMZn 3 AlO 7 (M = Ca, Sr, Ba) exhibited the highest emission intensity and formed a wide yellow emission band centred at 563 nm. The full width at half maximum of the YSrZn 3 AlO 7 phosphor was 172.6 nm. A theoretical model based on the designed oxygen vacancies was proposed to determine the self-activated luminescence mechanism. Density functional theory calculations revealed that oxygen vacancies lead to the generation of new energy levels. Electron paramagnetic resonance experiments further confirmed that the luminescence originated from oxygen vacancies. Eventually, a warm WLED device ((x, y) = (0.4057, 0.4359)) with a correlated color temperature of 3814 K and a relative color rendering index of 83 was successfully prepared using the YSrZn 3 AlO 7 phosphor and a 365 nm UV LED chip. These results suggest that YSrZn 3 AlO 7 is a promising WLED phosphor and provide new insights into the application of self-activated phosphors in WLED.
研究领域:
材料科学
·
光电技术
·
照明技术
✓ 已验证
DOI
高影响因子
ENERGY & FUELS
·
2024
·
IF 5.2
Jinchen Ma,Yingjie Mi,Fan Wang,Chaohe Zheng,Haodong Huang,Haibo Zhao
In the chemical looping combustion of chlorine-rich biomass or coal, a trace element, chlorine, will cause serious corrosion of oxygen carriers and heat exchange equipment in boilers. To address this issue, we design Ca- and Ba-decorated oxygen carriers to achieve two goals: on one hand, reducing the concentration of chlorine-containing gases by in situ dechlorination; on the other hand, employing protective materials to preferentially bind with gaseous chlorine to safeguard the active components of the oxygen carriers. Carefully designed experiments are conducted under simplified experimental conditions using 50 ppmv HCl-containing CH4 to evaluate the intrinsic characteristics of oxygen carriers in terms of dechlorination efficiency and reactivity. The results demonstrate that both the reaction performance and the chlorine-resistance performance of Ca–Cu and Ba–Cu composite oxygen carriers are significantly improved. This is because (a) Ca and Ba preferentially form chlorides with HCl, effectively shielding the active Cu component of the oxygen carrier from chlorine poisoning and (b) the specific surface area and pores of Ca/Ba-decorated oxygen carriers are increased, which not only strengthens the heterogeneous reaction between oxygen carrier and combustible gas but also improves the chemical looping combustion performance. The Cl-resistant oxygen carriers, Ca–Cu and Ba–Cu, emerge as promising candidates for the chemical looping combustion of fuels with high chlorine content.
研究领域:
能源化学
·
材料科学
·
环境工程
✓ 已验证
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2020
·
IF 3.104
Youchun Pan,Qijie Jin,Bingxu Lu,Yan Ding,Xin Xu,Yuesong Shen,Yanwei Zeng
MnCeO x /TiO 2 has been widely used in selective catalytic reduction (SCR) of NO x at low temperature. However, it is often poisoned in the presence of water vapor and sulfur dioxide . In this work, the promotion mechanism of Ba modification was investigated. Results show that the doped BaO reacts with CeO 2 and forms BaCeO 3 . This unique perovskite structure of BaCeO 3 significantly enhances NO oxidation and NH 3 activation of MnCeO x /TiO 2 catalyst so that the NO conversion and the resistances to SO 2 improve. It is found that Ba species obviously promotes the NO adsorption ability and improve the redox properties of MnCeO x /TiO 2 catalyst. While the acid properties of the catalyst are inhibited by Ba modification and among which Lewis acid sites are dominant for both MnCeO x /TiO 2 and MnCe(Ba)O x /TiO 2 catalysts. Furthermore, in situ DRIFT experiments reveal that the NO reduction upon MnCeO x /TiO 2 and MnCe(Ba)O x /TiO 2 catalysts follows both E-R and L-H mechanisms, in which L-H is preferred. Ba species enhances the formation of active nitrate species, which accelerates the NO reduction through L-H mechanism. It is interesting that although Ba species weakens the NH 3 adsorption, it induces the ammonia conversion to coordination ammonia, which in turn accelerates the catalytic reaction .
研究领域:
环境科学
·
催化化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Lu Cao,Huijiadai Luo,Xiaoxiao Huang,Yong Huang,Hua Ke
BaTiO 3 ceramics were synthesized via a conventional solid-state reaction method to investigate the influence of lattice strain induced by tiny content of Fe 3+ doping (1 mol%) on the structural evolution and ferroelectric properties. The incorporation of Fe 3+ introduces a compressive strain field, resulting in a reduced c / a ratio and a disordered domain configuration. Such lattice strain significantly enhances the maximum ferroelectric polarization ( P max ) from 23.2 μC/cm 2 for undoped BaTiO 3 ceramic to 40.6 μC/cm 2 for BaTi 0.99 Fe 0.01 O 3- δ ceramic. This observed enhancement is attributed to a lowered energy barrier for polarization switching and the facilitation of domain wall motion. Phenomenological analysis based on symmetry-related strain-polarization coupling further reveals that the Fe 3+ induced compressive strain mitigates the lattice mismatch stress at domain boundaries and alleviates the strain constraint on polarization switching. These findings clarify the relationship between chemical-doping-induced lattice strain and ferroelectric performance, offering a pathway for the deliberate control of domain structure to achieve high ferroelectric performance in bulk ceramics.
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2021
·Vol. 32
·期 1
·2103927
·
IF 18.808
Zhiyu Yang,Yifei Zhao,Yayun Zhou,Jianwei Qiao,Yu-Chun Chuang,Maxim S. Molokeev,Zhiguo Xia
Near-infrared (NIR) light-emitting diodes (LEDs) light sources are desirable in photonic, optoelectronic, and biological applications. However, developing broadband red and NIR-emitting phosphors with good thermal stability is always a challenge. Herein, the synthesis of Eu 2+ -activated SrY 2 O 4 red phosphor with high photoluminescence quantum efficiency and broad emission band ranging from 540 to 770 nm and peaking at 620 nm under 450 nm excitation is designed. Sr/Ba substitution in SrY 2 O 4 :Eu 2+ has been further utilized to achieve tunable emission by modifying the local environment, which facilitates the giant red-shifted emission from 620 to 773 nm while maintaining the outstanding thermal stability of SrY 2 O 4 :Eu 2+ . The NIR emission is attributed to the enhanced Stokes shift and crystal field strength originated from the local structural distortions of [Y1/Eu1O 6 ] and [Y2/Eu2O 6 ]. The investigation in charge distribution around Y/Eu provides additional insight into increasing covalency to tune the emission toward the NIR region. As-fabricated NIR phosphor-converted LEDs demonstration shows its potential in night-vision technologies. This study reveals the NIR luminescence mechanism of Eu 2+ in oxide-based hosts and provides a design principle for exploiting Eu 2+ -doped NIR phosphors with good thermal stability.
研究领域:
材料科学
·
光学工程
·
光电子学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2024
·
IF 2.7
Lijing Chen,Jianxin Wu,Yuxin Gu,Liang Liu,Yong Li,Xiaofeng Lin,Wenjing Lin,Lei Ji,Yanhong Peng,Guobin Yi
Acrylate had developed rapidly because of its excellent chemical resistance, high-gloss surface, and weather resistance. However, the poor heat resistance of acrylate limited its application in coatings. To overcome this problem, an organic–inorganic hybrid polymer of zirconium silicone resin (ZSR)-modified acrylate has been successfully synthesized by solution polymerization. The results indicated that the heat resistance of acrylate was significantly improved due to the Si O Si and Si O Zr structures of ZSR and the increased cross-linking density induced by ZSR. After the incorporation of ZSR, the decomposition temperatures of 5% of acrylate increased from 300.4 and 349.2°C. The performance of the ZSR/(P(MMA/BA)) showed no significant change in uniformly heating at 200°C for 24 h. The composite films showed hydrophobicity, with the contact angles increasing to more than 90°. The S4 sample displayed the outstanding comprehensive performance, that is, 5% weight loss at 341.3°C, water contact angle of 97.9°, elongation at break of 852%, and tensile strength of 9.9 MPa. The high-performance heat resistant coating is a promising material for application in architecture, decoration, and mechanical equipment.
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）