JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 12
·9595-9604
·
IF 2.22
Zhou Junyi,Zhang Huimin,Chang Aimin,Zhao Yifeng
La x Bi 1− x FeO 3 (LBFO) materials were synthesized by sol–gel method with x = 0.0, 0.1, 0.2, and 0.3. LBFO ceramics were obtained by rapid liquid phase sintering and conventional sintering, respectively. X-ray diffraction (XRD) and Raman spectroscopy indicated that the phase transition from twisted diamond R3C to orthogonal Pbnm occurs in the course of the increase of La element doping. Scanning electron microscopy demonstrated that the grain size of LBFO ceramics decreased from 10 to 1 μm, with the increase of La ion doping, and the volatilization of Bi decreases from 6.48 to 1.43%. It was found that LBFO ceramics have the characteristic of negative temperature coefficient (NTC), the resistivity (100 °C) is from 4.32 × 10 6 to 2.71 × 10 8 Ω cm, the material constant ( B 100/700 value) is about 6000–9000 K, the activation energy of LBFO is around 0.56 to 0.82 eV, and the temperature range of LBFO is from 100 to 700 °C. The resistivity change of LBFO is less than 1% after 500 h of ageing at 300 °C.
研究领域:
材料科学
·
物理学
✓ 已验证
DOI
高影响因子
CHEMICAL PHYSICS LETTERS
·
2022
·
IF 2.719
Cheng Li,Cheng Luo,Wei Zhou,Ruiling Zhang,Daoyuan Zheng,Peigeng Han
Lead-free vacancy-ordered quadruple perovskites have received extensive attention in optoelectronic applications. We study the optical properties and charge-carrier dynamics of Cs 4 Mn(Bi 1-x Sb x ) 2 Cl 12 (0 ≤ x ≤ 1) quadruple perovskite single crystals (SCs), which exhibit excellent stability and Mn 2+ -based photoluminescence (PL) emission. The ratio of Bi:Sb has a great influence on PL intensity. As the Bi 3+ content increases, the PL quantum yield (PLQY) shows a monotonically increasing trend and enhances by more than 40 times, attributed to larger energy difference between conduction band minimum and 4 T 1 state of Mn 2+ ions, weaker Mn-Mn coupling interaction due to longer Mn···Mn distance and smaller Jahn-Teller distortion, and lower carrier-phonon coupling. Moreover, Cs 4 Mn(Bi 1-x Sb x ) 2 Cl 12 nanocrystals were synthesized through top-down ultrasonic crushing method. The PL quenching of Cs 4 MnBi 2 Cl 12 nanocrystals compared to corresponding SCs arises from surface defect trapping. Our work provides an in-depth understanding of Mn 2+ -based PL mechanism.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2024
·
IF 3.9
Chi Ma,Zhiyong Zhong,Quanjun Xiang
The photocatalytic efficiency of bismuth-based metal-organic framework (Bi-MOF) is extremely restricted by the rapid recombination of photogenerated electron-hole pairs, which reduce the number of electrons involved in the photocatalytic reduction reaction. Constructing precise interfacial bond bridges between metal nanoparticles (NPs) and MOFs has emerged as an effective strategy to address the above-mentioned issues, promoting the electrons transfer. Herein, this study improves the sluggish dynamics of photogenerated charge in Bi-MOF by inducing the Pd-O-Bi bond bridges at the interface on a Pd NPs-decorated Bi-MOF (Pd/Bi-MOF) nanosheets. This phenomenon results in an interaction between Pd NPs and the Bi-MOF support. And Pd-O-Bi bond bridges provide the fast electron transfer channels, triggering the directional migration of photogenerated electrons from Pd to Bi node, then enhancing the spatial separation of photogenerated electron-hole pairs, finally facilitating overall photocatalytic CO 2 reduction. The presence of these bond bridges leads to higher enhancement in CO production for Pd/Bi-MOF nanosheets compared to the Bi-MOF nanosheets under visible light irradiation after 4.5 h. This research demonstrates the importance of interfacial bond bridges and provides a reasonable guide to design efficient photocatalyst for reduction of CO 2 to CO.
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Qi Wang,Ningyi Li,Meng Tan,Man Deng,Guoxiang Yang,Qiang Li,Hao Du
Photocatalysis is an emerging technique for the remediation of refractory organic contaminants. Herein, a novel dual Z-scheme Bi/BiOI-Bi 2 O 3 -C 3 N 4 heterojunctions were constructed through a calcining process following with I − etching and UV-reduction processes. Various analytical technologies were adopted to characterize the materials. As a result, the Bi 0 decorated composite presented improved visible-light-response and rapid charge transfer. Due to the synergy of Bi 0 and dual Z-scheme heterostructures, a remarkable photocatalytic performance toward phenol degradation was achieved with the highest degradation efficiency of 93.2% and rate constant of 0.0161 min −1 over the optimal composite within 75 min of visible light irradiation. Interestingly, the concentration of the yielded benzoquinone considerably decreased with the introduction of C 3 N 4 . Trapping experiments and electron spin resonance (ESR) tests indicated that h + , O 2 − , OH and e − contributed to phenol remediation, and h + and O 2 − were the crucial species toward phenol degradation. Furthermore, outstanding stability was obtained only with a decline of 3.8% after 4 cycles. A reasonable charge transfer mechanism was also proposed. This work provides a new route for in situ construction of Bi 0 decorated dual Z-scheme heterojunction for phenolic compounds degradation.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2012
·Vol. 2
·期 9
·3753-3758
·
IF 0
Jing Ma,Jia Chu,Liangsheng Qiang,Juanqin Xue
Bi-doped TiO2/SBA-15 (Bi–TiO2/SBA-15) was synthesized by a wet impregnation method. It was found that SBA-15 retained its ordered hexagonal mesostructure after incorporation of TiO2 and Bi. TiO2 nanoparticles and Bi species dispersed well and anchored both in the channel and the wall of SBA-15. The photocatalytic activity was evaluated on photodegradation of Rhodamine B (RhB) under visible light irradiation (λ ≥ 420 nm). Experimental results indicated that Bi–TiO2/SBA-15 exhibited higher photocatalytic activities than pure TiO2 and TiO2/SBA-15 owing to the synergetic effects of Bi species and TiO2. The degradation of RhB by these catalysts follows the pseudo-first-order kinetic model and Bi–TiO2/SBA-15 (2.0%) was found to be the best. The effect of Bi doping on the photocatalytic activity was investigated by the density functional theory (DFT) method. The calculated results indicated that Bi doping could improve the photocatalytic activity by extending the spectral response from UV to the visible region, making the Bi–TiO2/SBA-15 active under visible light irradiation.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2019
·Vol. 103
·期 5
·3104-3118
·
IF 3.094
Xiang Lv,Zhengyi Zhang,Zhiqiang Cao,Wei Jiang,Lifen Shi,Xiaojuan Zhao,Liyun Ma,Tianhe Wang,Shou Peng
A stable and translucent Bi@Bi 4 Ti 3 O 12 /TiO 2 film was fabricated on conventional glass substrates for the first time. The film exhibited a good photocatalytic performance and efficient self-cleaning capability against organic dyes under full spectral irradiation and visible light irradiation. Bi 4 Ti 3 O 12 /TiO 2 film was first prepared on a glass substrate with colloidal silica as a high temperature binder, followed by implantation of nanoscale Bi in it by an in-situ partially reduction of Bi 4 Ti 3 O 12 to generate Bi@Bi 4 Ti 3 O 12 /TiO 2 films. The improved photocatalytic ability is probably attributed to the surface plasmon resonance of Bi atom as well as the enhanced electron transfer efficiency and synergistic effect of Bi 4 Ti 3 O 12 and TiO 2 . According to trapping experiments, hydroxyl radicals (OH) were active species in the photocatalytic degradation of dyes under full spectral light irradiation and possible photocatalytic mechanism was proposed. The film prepared in this work may well have potential practical applications in many aspects, such as cleansing treatments for high building external decorative panels and also systematic characterization of the film suggests that the in-situ reduction is an effective and simple way to produce nanoscale Bi@Bi 4 Ti 3 O 12 .
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2025
·Vol. 10
·期 12
·e202500499
·
IF 2
Tianzhu Shao,Qi Wang,Jiahao Wei,Gonggang Sun,Xinbao Li
Graphical The study focuses on the synthesis of SCR catalysts with high activity and excellent alkali resistance. The redox performance and surface acidity of VWTi are enhanced and the atomic valencies is optimized through the doping of Ce and Bi. Therefore, the catalytic activity of the catalyst is significantly enhanced and excellent catalytic activity is maintained even after KCl poisoning. Ce-doped V 2 O 5 -WO 3 /TiO 2 (CeVWTi) and its subsequent modifications have been recognized as effective catalysts for the selective catalytic reduction of NO. Herein, CeVWTi catalysts doped with varying amounts of bismuth sulfate (Bi 2 (SO 4 ) 3 ) were synthesized and evaluated for their activity and alkali resistance. These catalysts were characterized using XPS, BET, SEM, H 2 -TPR, NH 3 -TPD, and XRD techniques. The optimal doping level of Bi 2 (SO 4 ) 3 was 1 wt.%. The NO conversion rate of the catalyst co-doped with Ce and Bi was 71.6% under the reaction conditions of 300 °C, gas hour space velocity (GHSV) = 200,000 h −1 with a gas composition of 550 ppm NO, 550 ppm NH 3 , 5.6% O 2 , and N 2 as the balance. The NO conversion efficiency of the Bi 0.01 CeVWTi catalyst was maintained at 90.7% after the addition of 1 wt.% KCl poisoning under the reaction conditions of 350 °C, GHSV = 200,000 h −1 , 550 ppm NO, 550 ppm NH 3 , 5.6% O 2 , and N 2 as the balance. Characterization showed that, despite the reduction in the specific surface area of the catalyst and some acidic sites due to Bi doping, the redox performance of Bi 0.01 CeVWTi was significantly enhanced. The excellent redox performance was maintained even after KCl poisoning.
研究领域:
环境科学
·
催化化学
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2022
·
IF 3.754
Jinfen Niu,Kai Wang,Lan Yang,Jiahui Shi,Yue Zhang,Fan Yang,Xiaojiao Yu,Binghua Yao
Photocatalysis can be a potential technique for decomposing antibiotics contaminants from water. In this study, g-C 3 N 4 modified Bi/BiOBr nanosphere were prepared by a simple microwave solvothermal method, and the structure-properties relationships of the Z-scheme heterojunction were evaluated in degrading organic dyes. Various characterization techniques were then applied to elucidate the structure-performance relationships of the resulting heterojunction photocatalysts in degrading CIP. Compared with pristine g-C 3 N 4 or Bi/BiOBr, the g-C 3 N 4 @Bi/BiOBr nanocomposites showed heightened property in photocatalytic degradation of CIP. The photocatalytic efficiency of CIP decomposition over the Z-scheme of g-C 3 N 4 @Bi/BiOBr heterojunction was about 2.38 and 1.35 times homologous to those of original g-C 3 N 4 and Bi/BiOBr. The enhancement in photocatalytic activity of g-C 3 N 4 @Bi/BiOBr could be described by the Z-scheme pathway and the SPR effect of Bi 0 , which broadened visible light absorption and promoted the separation of photoinduced carriers. In addition, the effect of typical water matrix factors, such as pH, anionic, and cationic on photodegradation rate were evaluated. Furthermore, results of scavenging experiments showed that ·OH, ·O 2 − , and h + all participate in the degradation of CIP. Based on the band structure and scavenging measurements, a possible photocatalytic mechanism for the as-synthesized g-C 3 N 4 @Bi/BiOBr composites was proposed.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 14
·11276-11285
·
IF 2.22
Deng Yuehong,Zhou Yi,Tang Haiqin,Xu Yifeng,Tan Yawen,Zou Hao,Xiang Ye
In this work, Bi spheres were deposited on bulk WO 3 ·0.33H 2 O and TiO 2 (P25) nanoparticles to form Z-scheme Bi/TiO 2 /WO 3 ·0.33H 2 O heterojunction material for the first time by a simple hydrothermal method. The as-prepared materials were comprehensively characterized by XRD, XPS, SEM, TEM, UV–Vis DRS, BET surface area, EIS, and Mott-Schottky analysis. The ternary Bi/TiO 2 /WO 3 ·0.33H 2 O composites exhibited superior degradation efficiency for RhB than pure WO 3 ·0.33H 2 O, TiO 2 (P25), and their binary composites. The degradation rate reached 99.84% after 30 min under simulated sunlight. The enhancement of photocatalytic activity could be attributed to the Z-scheme heterojunction system with metal Bi as an electronic medium, which greatly enhanced the efficiency of charge separation. This report demonstrated that Z-scheme Bi/TiO 2 /WO 3 ·0.33H 2 O heterojunction photocatalytic material has potential application value in dye wastewater treatment.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2020
·
IF 5.778
Jiaxin Li,Mo Li,Da Li,Qinxue Wen,Zhiqiang Chen
Coal gasification wastewater (CGW) contains a large amount of toxic pollutants , which seriously affects the subsequent biochemical treatment. In order to investigate the efficiency of electrocatalytic oxidation on pretreatment of CGW, lead dioxide electrodes doped with PEG and Bi were successfully prepared. Scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction were comprehensively used to characterize the lead dioxide electrode and the electrochemical performance was also tested by linear sweep voltammetry curve, cyclic voltammetry curve and AC impedance. Biodegradability and toxicity of CGW were evaluated by dehydrogenase activity and acute toxicity, respectively. Results showed that the doping of PEG and Bi significantly improved the electrochemical performance and catalytic oxidation performance of lead dioxide electrodes. The degradation rate of phenol by Sn–Sb/PbO 2 (PEG + Bi) electrode were 1.57 times of that by pure lead dioxide electrode. The removal of TOC and total phenols were 53.2% and 82.7%, respectively at 120 min under 40 mA cm −2 by Sn–Sb/PbO 2 (PEG + Bi) electrode. The changes of biodegradability, biological toxicity and by-products were analyzed. Furthermore, 3,5-dimethylphenol was used as characteristic pollutant to study the degradation mechanism of phenolic pollutants in electrocatalytic system. According to the intermediate products detected by GC-MS, possible degradation pathways in electrocatalytic system were proposed.
研究领域:
环境科学
·
电化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS CHARACTERIZATION
·
2025
·
IF 5.5
Qi-Hua Yang,Han-Qi Wei,Shu-Juan Zhao,Gui-Hua Li,Xuan Liu,Le Fu,Zhi-Wei Luo,Jia-Yong Si,Ge-Mei Cai
In recent years, the proliferation of counterfeit products has led to increased concerns about anti-counterfeiting technology, with traditional single-mode fluorescence methods proving insufficient due to their susceptibility to replication. The new copper-based halide materials have shown great potential in the field of multi-mode anti-counterfeiting due to their unique structure, excellent luminescence performance, and high defect tolerance. In this work, near-infrared emission of Cs 3 Cu 2 I 5 was achieved for the first time through Bi doping. By exploiting the dual emission center characteristics of the resulting Cs 3 Cu 2 I 5 :Bi, we demonstrated its excitation wavelength-dependent emission. It was then mixed with cyclohexane to prepare an advanced fluorescent anti-counterfeiting coating for screen printing, enabling high-precision pattern printing onto various substrates. The resulting anti-counterfeiting patterns exhibit excellent weather resistance, remaining virtually unchanged after 60 days at room temperature. This study lays the foundation for expanding the emission range of Cs 3 Cu 2 I 5 and adjusting multi band emission, and confirms its potential application in the field of multi-mode anti-counterfeiting.
研究领域:
材料科学
·
光学工程
·
防伪技术
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Qian Li,Yaping Wang,Xiao Xiao,Rui Zhong,Jiali Liao,Junling Guo,Xuepin Liao,Bi Shi
Natural leather (NL) based composite protection materials with lightweight, flexibility, wearability and high shielding efficiency will remarkably innovate the current research on X-ray protection materials. A co-doped Bi/Ce-NL composite with outstanding X-ray attenuation in the energy range of 20−120 keV is successfully fabricated. The uniform distribution of Bi 2 O 3 and CeO 2 nanoparticles in the hierarchical structure of natural leather significantly promotes the X-ray attenuation by improving the weak absorption region of Bi with Ce via synergistic effects of the two elements. The fabricated Bi/Ce-NL loading with 0.755 mmol cm −3 Bi 2 O 3 and 1.51 mmol cm −3 CeO 2 achieves approximately 100% X-ray shielding when the energy below 40 keV. Thus, the fabricated Bi/Ce-NL with superb X-ray attenuation can safely and comfortably protect human from the risk of X-ray exposure with low bulk density, high water vapor permeability, exceptional mechanical properties and excellent bending resistance, presenting significant advantages in wearability and flexibility compared to both traditional lead-based and polymer-based protection materials.
研究领域:
材料科学
·
医学防护
·
纳米技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）