CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Youzhou He,Shuang Luo,Xueli Hu,Yaling Cheng,Yumin Huang,Shengming Chen,Min Fu,Yiming Jia,Xingyan Liu
The bifunctional photocatalyst CDs@NH 2 -MIL-125(Ti), carbon nanodots (CDs) encapsulated in NH 2 -MIL-125(Ti), was constructed in situ by a simple and convenient low-temperature calcination approach, which exhibited great capacity in NO removal (at air level) and H 2 evolution simultaneously under visible-light irradiation. The NO removal rate of CDs@NH 2 -MIL-125(Ti) (10 mM) reached 53%, which was 28.4% higher than pristine NH 2 -MIL-125(Ti). Moreover, the H 2 production rate was 5820.95 μmol g −1 , which was 5.34 times higher than that of original NH 2 -MIL-125(Ti). The corresponding optical and electrical performances of CDs@NH 2 -MIL-125(Ti) characterized by UV–Vis, UCPL, ESR, and in situ DRIFTS , etc. indicated that the encapsulated CDs uniformly dispersed in the pores of NH 2 -MIL-125(Ti) could improve the visible light utilization via the up-conversion effect and photosensitization, and serve as an electron-receiver to significantly prolong the lifetime of the photogenerated charge carriers, thus enhancing the photocatalytic performance. The results revealed that fabricating CDs with metal-organic frameworks (MOFs) could be an available strategy for us to boost the photocatalytic NO elimination and H 2 evolution activity simultaneously.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2023
·Vol. 170
·期 12
·120504
·
IF 3.9
Zhenyu Fu,Yuhan Li,Lirong Huang,Weiya Zhang,Ling Weng
Lithium metal batteries are considered promising contenders for the next generation of high energy density batteries. However, lithium metal anode with inhomogeneous lithium deposition in liquid electrolyte causes the uncontrolled growth of lithium dendrites. Owing to the high dielectric constant, thermal stability and electromechanical stability of polyvinylidene fluoride, we design a novel gel polymer electrolyte consisting of porous polyvinylidene fluoride polymer matrix, liquid electrolyte, ethylene carbonate and MIL-125 (Ti) (Ti8O8(OH)4(BDC)6, BDC = 1,4-benzene dicarboxylate) for facilitating Li+ transfer and alleviating the growth of lithium dendrites. The high dielectric constant environment facilitates the dissociation of Li+, and the porous polymer matrix structure accommodates more Li+ for fast transfer. Ethylene carbonate reduces the crystallinity of the polymer matrix and improves the ionic conductivity. MIL-125 (Ti) nanoparticles with surface area and uniform micropores improve toughness for enhancing mechanical property, and synergistically promote the Li+ transfer for building stable interfacial phase to alleviate the growth of Li dendrites. Therefore, the gel polymer electrolyte has high ionic conductivity of ∼1.50 × 10−3 S cm−1 at 25 °C, and quasi-solid-state Li/LiFePO4 battery has high discharge capacity of 153.5 mAh g−1 after 250 cycles at 25 °C and 0.3 C.
✓ 已验证
产品关联
DOI
高影响因子
OPTICAL MATERIALS
·
2020
·
IF 2.779
Lanqing Ling,Yu Tu,Xuanyu Long,Qianwen Li,Jiabao Gu,Nan Liu,Zequan Li
The emission of organic dye wastewater poses a great threat to the ecological environment. Therefore, it is necessary to prepare environment-friendly photocatalytic materials with high photocatalytic performance to degrade organic dyes. In this work, a new composite photocatalyst SnS 2 /NH 2 -MIL-125 (Ti) was formed by loading the multiphase SnS 2 of quantum dots (QDs) and hexagonal nanodiscs (NDs) on the NH 2 -MIL-125 (Ti) through one-step hydrothermal method , then used it to remove 40 mg/L Rhodamine B (RhB) under visible light . Compared with SnS 2 and NH 2 -MIL-125 (Ti), the photocatalytic degradation activity of the 12 wt% SnS 2 /NH 2 -MIL-125 (Ti) was enhanced by 2.4 and 2.1 times respectively, reaching 90.5%, after 80 min of visible light irradiation. The four times recycling test shows that this photocatalyst has outstanding stability and durability. Through analysis, NH 2 -MIL-125 (Ti) modified SnS 2 can improve visible light absorption, provide more active sites and inhibit photoelectron-hole recombination, thus enhancing photocatalytic activity . Superoxide radical (•O 2 − ) and hole (h + ) were determined to be the key active substances in the process by the reaction substance capture experiment. The photodegradation mechanism of RhB is also investigated and studied in detail. This novel multiphase SnS 2 /NH 2 -MIL-125 (Ti) material provides a new perspective for the design of organic-inorganic composite photocatalysts with excellent performance and improved stability, and has potential application in environmental purification.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2020
·
IF 7.1
Yunlei Zhou,Yue Wang,Shurong Li,Xi Fang,Huanshun Yin,Po Wang,Shiyun Ai
Photoelectrochemical (PEC) immunosensor was designed to detect N 1 -methyladenosine (m 1 A), where BiVO 4 /g-C 3 N 4 heterojunction was employed as photoactive material, polyamidoamine (PAMAM) and 4-carboxyphenylboronic acid (CPBA) were used as m 1 A antibody immobilization matrix, and Ti-based metal-organic framework encapsulated heterostructure of TiO 2 @NH 2 -MIL-125(Ti) was adopted as signal amplification. Due to the interaction between TiO 2 and phosphate, TiO 2 @NH 2 -MIL-125(Ti) was captured after immunoreaction between m 1 A and its antibody, which can further improve the detection sensitivity with increased PEC response. Under optimal experimental conditions, this method presented wide dynamic range (0.05–35 nM) with the low determination limit (16.7 pM, S/N = 3). This detection strategy showed good detection reproducibility, stability and selectivity. This method was applied to assess the effect of antibiotics on m 1 A content in the leaves, stems and roots of rice seedlings.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Shiyu Zhang,Meng Du,Junyan Kuang,Zipeng Xing,Zhenzi Li,Kai Pan,Qi Zhu,Wei Zhou
Mesoporous NH 2 -MIL-125(Ti)@Bi 2 MoO 6 core-shell heterojunctions with surface defects were fabricated through a facile solvothermal method . The mesoporous core-shell structure with a large relative surface area of 87.7 m 2 g −1 and narrow pore size of 8.2 nm extends the photoresponse to the range of visible light due to the narrow band gap of ∼1.89 eV. The visible-light-driven photocatalytic degradation efficiency of highly toxic dichlorophen and trichlorophenol were 93.28 and 92.19%, respectively, and the corresponding rate constants were approximately 8 and 17 times higher than the rates achieved by pristine NH 2 -MIL-125(Ti). The photocatalytic oxygen production rate was increased to 171.3 µmol g −1 . Recycling for several cycles indicates high stability, which is favorable for practical applications. The excellent photocatalytic performance can be ascribed to the formation of the core-shell heterojunctions and to the surface defects that favor charge separation and visible light absorption; the mesoporous structure offers an adequate number of surface active sites and mass transfer. This novel mesoporous core-shell photocatalyst will have potential applications in the environment, and this strategy offers a new insight into fabrication of other high-performance core-shell structure photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Honglin Qin,Lizhen Qiao,Chen Li,Xiuchao Yao,Bingyan Han
In this work, a novel composite Fe 3 O 4 /NiAl LDH/MIL-125 (Ti) was developed through modifying the Ti-based MOF into magnetic NiAl LDH materials and applied to efficiently extract organophosphorus flame retardants (OPFRs) from water samples. The prepared Fe 3 O 4 /NiAl LDH presented good extraction efficiency for OPFRs, and, electrostatic interaction and π-π interaction also played an important role for the extraction process, except for the selective metal-affinity coordination between the adsorbents and OPFRs. Some key factors influencing the magnetic solid-phase extraction efficiency were explored, including adsorbent amount, ultrasound time, solution pH, salt content, the type of elution solvent and eluent volume. Under the optimal conditions, the coefficients of determination (R 2 ) of the OPFRs were 0.9976–0.9996, and the limits of detection (S/N = 3) and limits of quantification (S/N = 10) were respectively 0.3–1.0 μg·L −1 and 1.0–3.0 μg·L −1 . The developed approach was applied for the extraction and determination of OPFRs in the environmental water samples, and the spiked recoveries ranged from 82.79 % to 111.32 %.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Zhiqiang Guo,Xinmiao Wu,Juanjuan Meng,Xinxin Li,Yuan Li,Liangliang Hu
MIL-101(Fe) has received more and more attention in wastewater treatment, and how to further improve its stability and sorption capacity has become a research focus. In this study, metal Mg was used to dope MIL-101(Fe) to construct Mg@MIL-101(Fe) with bimetallic sites, which was then mixed with NH 2 -MIL-125(Ti) to successfully fabricate Mg@MIL-101(Fe)/NH 2 -MIL-125(Ti) (MOM) bis-MIL composites. MOM not only contains a large number of sorption sites but also exhibits excellent stability and reusability, realizing efficient sorption of Pb(II) from aqueous solution. In addition, the sorption performance and mechanism of Pb(II) on MOM were investigated by the characterizations of SEM, BET, TG, XRD, FTIR and XPS, as well as the kinetic and thermodynamic analyses. The sorption of Pb(II) on MOM is in accordance with the Langmuir isothermal model and pseudo-second-order kinetic model. The maximum sorption capacity of Pb(II) on MOM derived from the Langmuir model fitting is 320.941 mg·g −1 . The sorption of Pb(II) on MOM is strongly affected by pH, but not by ionic strength, which indicates that MOM has good resistance to salt interferences. The strong complexation of carboxyl, hydroxyl and amino functional groups with Pb(II) is the main sorption mechanism of Pb(II) on MOM, and electrostatic interaction and ion exchange also contribute to the sorption. In conclusion, MOM has strong practical application prospects in the treatment of Pb(II)-containing wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 3
·122692
·
IF 7.5
Huanggen Yang,Shulun Yin,Pei Zhang,Qi Zheng,Faisal Alresheedi,Imran Shakir,Saleem Raza,Duofu Li,Yan Sui
The energy crisis calls for eco-friendly alternatives, and hydrogen production presents a viable solution. As a clean energy source, hydrogen can be produced from water using renewable power, decreasing dependence on fossil fuels and substantially cutting greenhouse gas emissions paving the way for a greener future. This work involves the fabrication of Ti 3 C 2 T x and NH 2 -MIL-125(Ti) by hydrothermal procedures. Ti 3 C 2 T x material served as the substrate for the immobilization of NH 2 -MIL-125(Ti), which were then incorporated into sodium alginate to generate (Ti 3 C 2 T x @NH 2 -MIL-125(Ti)-SA). The electrocatalytic efficacy of Ti 3 C 2 T x @NH 2 -MIL-125(Ti)-SA was evaluated for the hydrogen evolution reaction (HER) under alkaline factors using a 1 M KOH electrolyte. The material demonstrated exceptional capacitance, impressive rate capability, and sustained stability during 1000 cycles over a 24 and 48 h. The Ti₃C₂Tₓ@NH₂-MIL-125(Ti)-SA composite exhibits excellent HER catalytic activity in alkaline media, delivering a low overpotential of 14 mV at 10 mA cm⁻² and a Tafel slope of 56.4 mV dec⁻¹ . Although the benchmark Pt/C catalyst shows slightly superior performance (12 mV, 41.1 mV dec⁻¹), the developed composite demonstrates comparable activity, along with advantages of structural stability and cost-effectiveness compared to noble metal-based catalysts. Overall, Ti 3 C 2 T x @NH 2 -MIL-125(Ti)-SA demonstrates excellent electrode performance in alkaline conditions, as compared with pristine Ti 3 C 2 T x and NH 2 -MIL-125(Ti), which marked by remarkable stability, low Tafel slope values, and minimized overpotentials, underscoring its significant promise for efficient water splitting applications.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2018
·
IF 11.698
He Xiao,Wenyao Zhang,Qiushi Yao,Liulian Huang,Lihui Chen,Bruno Boury,Zhongwei Chen
Metal organic frameworks (MOFs) are exploited in many applications of materials science and very recently were investigated as precursors or reagents for material synthesis. In a new way different from previous approaches, here we introduce for the first time the synthesis of metal oxide M x O y in the presence of M-free MOF acting partially as a sacrificial template and as a provider of doping metal atom. We demonstrate this approach in the case of ZnO prepared by a simple hydrothermal method in the presence of a Zn-free MOF like MIL-53(Al) or MIL-125(Ti). The resulting ZnO show low content of Al or Ti < 2% and properties are significantly different depending on whether MIL-53(Al) or MIL-125(Ti) are used or if no MOF is present. The nature and presence of MOF has different major effects on the morphology, the specific surface area of as prepared ZnO and also on the oxygen defects in its crystal structure. Corroborating the XPS, UV–vis DRS, PL, EPR and DFT studies evidence the role of such O-defects on band gap narrowing for samples calcined at 400 °C. These exhibit high efficiency in photodegradation of methyl orange (MO) compared to ZnO prepared in MOF-free conditions or previous literatures. The kinetics of MO degradation is different depending on the morphology, the specific surface and oxygen defects. The present data open the door to a new approach of the synthesis of metal oxides and a control of their properties.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 8
·1-9
·
IF 6.232
Li Jingxian,Jiang Ding,Shan Xueling,Wang Wenchang,Chen Zhidong
A novel “off-on” electrochemiluminescence (ECL) aptasensor based on ECL resonance energy transfer (RET) system from 3,4,9,10-perylenetetracar-boxylic acid/the metal-organic frameworks NH 2 -MIL-125(Ti) (PTCA/NH 2 -MIL-125) to Au nanoparticles (Au NPs) was put forward for microcystin-LR (MC-LR) assay. The electrochemiluminescence (ECL) emission spectra of PTCA/NH 2 -MIL-125 show excellent spectral overlap with the UV-vis absorption spectrum of Au NPs. A linear response ranging from 10 fM (9.95 × 10 −6 μg L −1 ) to 0.1 μM (99.5 μg L −1 ) was obtained, and the detection limit was 3.6 fM (3.58 × 10 −6 μg L −1 ) under optimal conditions at a potential of − 1.6 V ( S/N = 3). Besides, the prepared ECL-RET MC-LR aptasensor exhibited good selectivity and stability.
Graphical abstract
✓ 已验证
DOI
PubMed
高影响因子
Journal of Environmental Sciences
·
2023
·
IF 6.9
Lei Zheng,Lixia Sun,Jiangbo Qiu,Junling Song,Luyi Zou,Yue Teng,Yongzhong Zong,Hongyan Yu
The coexistence of inorganic and organic contaminants is a challenge for real-life water treatment applications. Therefore, in this research, we used NH 2 -MIL-125(Ti) to evaluate the single adsorption of hexavalent chromium (Cr(VI)) or Rhodamine B (RhB) in an aqueous solution and further investigate simultaneous adsorption experiments to compare the adsorption behavior changes. The main influencing factors, for example, reaction time, initial concentration, reaction temperature, and pH were studied in detail. In all reaction systems, the pseudo-second-order kinetic and Langmuir isotherm models were well illuminated the adsorption progress of Cr(VI) and RhB. Thermodynamic studies showed that the adsorption process was spontaneous and endothermic. As compared to the single system, the adsorption capacity of Cr(VI) in the binary system gradually decreased as the additive amount of RhB increased, whereas the adsorption capacity of RhB in the binary system was expanded brilliantly. When the binary reaction system contained 100 mg/L Cr(VI), the removal rate of RhB increased to 97.58%. The formation of Cr(VI)-RhB and Cr(III)-RhB complexes was the cause that provided facilitation for the adsorption of RhB. These findings prove that the interactions during the water treatment process between contaminants may obtain additional benefits, contributing to a better adsorption capacity of co-existing contaminant.
✓ 已验证
DOI
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2021
·
IF 10.618
Yukun Yang,Wenyan Yan,Xiaomin Wang,Ligang Yu,Jinhua Zhang,Baoqing Bai,Caixia Guo,Sanhong Fan
In this work, a molecularly imprinted photoelectrochemical (MIP-PEC) sensor based on a novel PEC composite of metal-organic frameworks (MOFs) and TiO 2 (NH 2 -MIL-125(Ti)–TiO 2 ) was established for the ultrasensitive and selective detection of oxytetracycline (OTC). This is the first attempt of applying MOFs in the construction of MIP-PEC sensor. The NH 2 -MIL-125(Ti)–TiO 2 was synthesized by a simple one-step solvothermal method and modified onto the surface of indium tin oxide (ITO) electrode as the photosensitive layer. Subsequently, molecularly imprinted polymer (MIP) was modified as recognition element by electropolymerization . The NH 2 -MIL-125(Ti)–TiO 2 showed an enhanced photocurrent response due to stronger light absorption capacity and matched energy band. Furthermore, MIP greatly improved the selectivity and sensitivity of the constructed PEC sensor. The photocurrent response of the MIP-PEC sensor was reduced after OTC recognition because the specific binding of OTC to the imprinted cavities blocked the electron transfer of the electrode. Under optimal experimental conditions, the MIP-PEC sensor exhibited a wide detection range from 0.1 nM to 10 μM with a low limit of detection (LOD) of 60 pM, as well as certain reproducibility, stability and good applicability in real samples. The proposed sensor provides ideas for the application of MOFs in the construction of PEC sensors and will offer an alternative method for the detection of other pollutants in the field of food safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）