CATALYSIS LETTERS
·
2021
·Vol. 152
·期 5
·1495-1505
·
IF 3.186
Zhang Yue,Wang Li,Ma Qingqing,Wang Nan,Pan Zhiyong
SBA-15 was modified via post-treatment with (NH 4 ) 2 SiF 6 and (NH 4 ) 3 AlF 6 solution (NSF-T and NAF-T) and applied as support of Pd catalysts for the hydrogenation of 2-ethyl-anthraquinone (EAQ). The characterization results revealed that F could be incorporated into the framework of SBA-15 by forming Si–F bond and the amount of F increased as the molar ratio of F in treating solution to Si species in SBA-15 (F/Si) increased from 0.1 to 0.4 for NSF-T and 0.3 to 0.6 for NAF-T. At the same F/Si, the incorporated amount of F was larger with NSF-T than with NAF-T, and the latter could simultaneously create acid sites in catalysts. The hydrophobicity of catalysts could be effectively improved by incorporating F into SBA-15 supports, which favored the catalytic performance. The catalyst on SBA-15 treated by NSF with F/Si of 0.3 exhibited the high initial activity (0.24 molH 2 ·gPd −1 ·min −1 ) and selectivity (95.5%). Graphic Abstract
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2014
·Vol. 38
·期 8
·3853-3861
·
IF 3.159
Yu-Long Wang,Lu Zhu,Bo-Long Guo,Su-Wen Chen,Wang-Suo Wu
Two functionalized SBA-15 materials were prepared by a post-grafting method using phosphonate derivatives of diethylethylphosphonate (DEP) and ethylphosphonic acid (PA), which were used as adsorbents for removal of uranium(VI) from aqueous solution. These materials were characterized by FT-IR, NMR, TEM, nitrogen adsorption/desorption experiments, and elemental analysis. The effect on uranium(VI) sorption behaviors of the functionalized SBA-15 was studied. Typical sorption isotherms (Langmuir and Freundlich) were determined for the sorption process, and the maximum sorption capacity was calculated. The influence of organic functional groups on uranium(VI) sorption was also discussed. As a result, SBA-15-ethylphosphonic acid (SBA-15-PA) possessed not only a good sorption ability and a desirable selectivity for U(VI) over a range of competing metal ions but also an excellent reusability, which has potential application in separation of uranium(VI).
研究领域:
环境科学
·
材料化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2016
·Vol. 51
·期 13
·6295-6308
·
IF 2.302
Xu Zhifeng,Deng Peihong,Li Junhua,Xu Li,Tang Siping,Zhang Fuxing
This paper reports a new strategy for preparation of 2D molecularly imprinted materials (MIM) through the exploitation of thiol-ene click chemistry. 2D MIM for cholesterol was prepared using cholesterol as the template, acrolyl-modified β-cyclodextrin (acrolyl-β-CD) as the functional monomer, and thiol-modified SBA-15 (thiol-SBA-15) as the supporter. In this method, acrolyl-β-CD molecules were assembled around the templates by formation of template–monomer inclusion compounds. Then the acrolyl-β-CD molecules were anchored to the walls of the mesopores of SBA-15 via the thiol-ene click chemistry. After removal of the template molecules, the resulting recognition sites were formed in the mesopores of SBA-15. TEM, XRD, and N 2 adsorption–desorption analysis results demonstrated that the synthesized MIM had a highly ordered mesoporous structure. Results from FT-IR revealed that acrolyl-β-CDs have been successfully conjugated to SBA-15. The density of β-CDs attached on the MIM is determined by EA and TGA. The equilibrium binding amounts of MIM and non-imprinted materials (NIM) for cholesterol are 53.50 and 25.24 μmol/g, respectively. The 2D MIM exhibited binding affinity and specificity for a group of analytes which have similar size and shape to those of template. The application of the prepared materials as stationary phases in thin layer chromatography was investigated preliminarily. The imprinted materials had higher retention ability for the template than the NIM. The retention factors ( R
f ) of cholesterol on MIM and NIM are 0.62 and 0.81, respectively. The solid phase extraction of cholesterol using MIM as the adsorbent was further investigated. The recoveries of the molecularly imprinted solid phase extraction column for cholesterol were 77.1–94.7 % with relative standard deviations (RSD) of 2.25–6.78 %.
研究领域:
材料科学
·
生物化学
✓ 已验证
DOI
高影响因子
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
·
2013
·Vol. 2013
·期 16
·2963-2970
·
IF 3.12
Yan-Jing Gu,Bing Yan
Graphical Ln 3+ (Eu 3+ , Nd 3+ , Yb 3+ ) organic–inorganic mesoporous hybrid materials are prepared. The hybrids contain lanthanide complexes covalently grafted to 2-methyl-9-hydroxyphenalenone (MHPO) functionalized ordered mesoporous SBA-15 and with 1,10-phenanthroline as a second ligand. The materials exhibit the characteristic visible (Eu 3+ ) and near-infrared (NIR) luminescence (Nd + and Yb 3+ ) of lanthanides. 9-Hydroxy-2-methyl-phenalenone (MHPO) was synthesized and modified with 3-(triethoxysilyl)propyl isocyanate (TEPIC) through a hydrogen atom addition reaction to achieve a new chemical linkage (named as MHPOSi). SBA-15 mesoporous silica organically functionalized with MHPOSi was synthesized. The MHPOSi was linked to tetraethoxysilane (TEOS) through a condensation process in the presence of Pluronic P123 surfactant as a template. New Ln 3+ (Eu 3+ , Nd 3+ , Yb 3+ ) organic–inorganic mesoporous hybrid materials were prepared, in which the Ln 3+ complexes are covalently attached to SBA-15 and have 1,10-phenanthroline (phen) as a second ligand. The resultant mesoporous hybrids were characterized by FTIR spectroscopy, small-angle X-ray diffraction, N 2 adsorption–desorption measurements, thermal analysis, and UV/Vis spectroscopy. They all have high surface areas, uniform mesostructures, and good crystallinity. The photophysical properties of the functionalized mesoporous SBA-15 networks are discussed in detail and they still present excitation capability in the visible region despite the modification of the organic silane. Subsequently, they exhibit characteristic visible (Eu 3+ ) and near-infrared (NIR) luminescence (Nd + and Yb 3+ ).
研究领域:
材料科学
·
光学
·
化学
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry C
·
2014
·
IF 4.835
Nana Qian,Zhiming Duan,Yongheng Zhu,Qun Xiang,Jiaqiang Xu
4,4′-Diaminodiphenyl sulfone functionalized SBA-15 (DDS/SBA-15) with various loading amounts of DDS has been prepared via a postsynthesis grafting method. The 2D hexagonal mesoporous structures of these hybrids have been confirmed by small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), and N2 adsorption–desorption isotherms. The covalent grafting of DDS onto the SBA-15 was further confirmed by Fourier transform infrared spectroscopy (FT-IR). DDS/SBA-15 based quartz crystal microbalance (QCM) sensor shows good selectivity and quick response toward toluene vapor, and the detection limit is down to 20 ppb. Impedance spectroscopy measurements showed that the proton conductivity properties of DDS/SBA-15 depended on the loading amount of DDS. These hybrids demonstrated improved proton conductivities compared with pristine SBA-15, and a highest value of 2.26 × 10–4 S cm–1 has been observed when the DDS loading amount is 0.37 mmol g–1. Therefore, DDS/SBA-15 could serve as a promising candidate for both volatile organic compound (VOC) vapor sensing and proton conducting materials.
研究领域:
材料科学
·
化学传感器
·
能源材料
✓ 已验证
DOI
高影响因子
CARBOHYDRATE RESEARCH
·
2012
·
IF 2.332
Xingcui Guo,Quan Cao,Yijun Jiang,Jing Guan,Xiaoyan Wang,Xindong Mu
Mesoporous SBA-15 materials functionalized with propylsulfonic acid groups (SBA-15-SO 3 H) were synthesized through a conventional one-pot route. It was used as a catalyst for the selective synthesis of 5-hydroxymethylfurfural (HMF) from the dehydration of fructose using BmimCl as solvent. Reaction time, temperature and fructose concentration were investigated during the HMF synthesis procedure. The catalyst SBA-15-SO 3 H exhibits high fructose conversion (near 100%) and HMF selectivity (about 81%) with good stability in the HMF synthesis. It was a suitable catalyst to produce HMF from renewable carbohydrates in potential industrial process.
研究领域:
化学工程
·
催化化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2013
·
IF 3.365
Liang Chen,Zhen Zheng,Jing Wang,Xinling Wang
A unique redox responsive system for glutathione (GSH) triggered controlled release was prepared by modifying the mesoporous SBA-15 with l -cystine ester linked mPEG chains, in which the former was served as the nanoreservoir of guest molecules and the latter was applied as gatekeepers to block the mesopores. The disulfide bond in l -cystine ester can be effectively cleaved by redox reaction under glutathione of cancer cell level, and then resulting in the release of guests encapsulated in the pores. Fluorescein dye as the model drug was loaded into the mesoporous silica nanoparticles (MSNs) and released in PBS with 10 mM GSH and without GSH respectively to test the controlled release properties of the MSNs using UV–Vis spectra as the detector. The results showed that fluorescein dye in PBS with 10 mM GSH was released much more rapidly. Compared with such a controlled release system based on MCM-41, the SBA-15 based system showed a distinctive release behavior. The MSNs synthesized from SBA-15 can be used as an effective drug controlled release system for biomedical applications, especially for long-term drug delivery.
研究领域:
材料科学
·
药物递送
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2022
·
IF 6.562
Lidan Deng,Qiao Chen,Xingmao Jiang,Xiaowei Liu,Zheng Wang
Propane dehydrogenation is a promising way to produce propylene . Catalysts with high propane conversion, selectivity to propylene , and stability are vital to this technology. In this work, we determined that the catalytic performance of Pt/SBA-15 can be significantly enhanced by introducing an appropriate amount of indium . A too low ratio of In/Pt (1/8) or too high of a ratio (2/1) is detrimental to the activity of the catalyst. When the nominal ratio of Pt to In is 1/1, the initial propane conversion and selectivity towards propylene over 1Pt1In/SBA-15 are highest among all catalysts tested at 57.06 % and 99.04 %, respectively. The conversion rate decreased to 39.63 % after 28 h of reaction, but selectivity was retained at greater than 99 %. Very little coke was deposited on the used 1Pt1In/SBA-15 catalyst. With catalyst characterization, it was proposed that Pt 1 In 1 alloy nanoparticles with surface-enriched In 2 O 3 were responsible for the selective dehydrogenation of propane.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 110
·90904-90912
·
IF 3.84
Yueling Cao,Junwei Wang,Maoqing Kang,Yulei Zhu
Hydrogenolysis of glucose and cellobiose, used as the model feedstocks, over Ni–WO3/SBA-15 catalysts has been investigated to probe the influencing factors for the conversion of cellulose to ethylene glycol (EG). The conversion of glucose and cellobiose to EG showed different dependencies on reaction temperature; a lower reaction temperature was needed for the former. Additionally, the surface atomic ratio of W to Ni on the Ni–WO3/SBA-15 catalysts was the key factor for the product distribution. Both glucose and cellobiose had their own optimum W–Ni ratio for the production of EG, and the ratio of W to Ni for glucose was slightly lower than that of cellobiose. On the other hand, the Ni–WO3/SBA-15 catalysts were thoroughly characterized by N2 adsorption–desorption, X-ray diffraction (XRD), hydrogen-temperature programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The results indicated that the reducibility of Ni–WO3/SBA-15 catalysts with high Ni loading was more similar to that of pure NiO. More importantly, the change of surface atomic content of Ni and W of Ni–WO3 catalysts with various Ni loadings resulted from the surface W species of the catalysts being gradually covered by Ni species with the increase of Ni loading.
研究领域:
化学工程
·
催化转化
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Xiangyang Mao,Ge Liu,Bolun Yang,Jianxuan Shang,Bo Zhang,Zhiqiang Wu
Macromolecular volatiles are one of the important components of biomass pyrolysis products. Chemical looping reforming can efficiently convert macromolecular components into hydrogen-rich syngas. Oxygen carriers with good partial oxidation performance and excellent recycling performance are the key factor. In this work, the embeddedness strategy was proposed to regulate the micro-reaction environment of oxygen carriers and thus improve the recycling and partial oxidation performance. The characteristics of toluene chemical looping reforming via Fe 2 O 3 embedded in SBA-15 (Fe 2 O 3 @SBA-15) were studied in fixed-bed reactor. The performances of Fe 2 O 3 and Fe 2 O 3 @SBA-15 were compared. The effect of pure Fe 2 O 3 particle size, Fe 2 O 3 loading amount, and reaction temperature were investigated. Thermodynamic analysis results showed that the reaction could proceed spontaneously when the temperature was higher than 600℃. The experimental results showed that chemical looping reforming process could be divided into two stages, including partial oxidation and catalytic cracking. The main product in the first stage was syngas, while the main product in the latter stage was H 2 and coke. The Fe 2 O 3 particle size decreased from 5um to 30 nm, and the CO selectivity increased from 25.87% to 33.15%. This indicated that the nanocrystallization of Fe 2 O 3 would improve the partial oxidation performance. Compared with pure Fe 2 O 3 , the CO selectivity of Fe 2 O 3 @SBA-15 rose from 25.9% to 96.2%. The utilization rate of lattice oxygen and the conversion rate of toluene increased significantly. At 900℃, toluene was nearly completely converted, and the utilization rate of lattice oxygen reached 92.7%. The toluene conversion increased with the elevation of Fe 2 O 3 loading, and the CO selectivity always remained above 87.9%. With the elevation of reaction temperature from 700℃-900℃, toluene conversion increased from 30.5% to 95.6%, while CO selectivity decreased slightly. More importantly, the stability test results showed that after 10 cycles, toluene conversion rate only dropped by 1.9%, and the average concentration of gas products remained stable. The above results showed that the embeddedness of Fe 2 O 3 in SBA-15 could effectively improve CO selectivity, enhance the transmission and release of lattice oxygen, and elevate the catalytic performance and cycle stability of oxygen carriers.
研究领域:
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
POLYMER BULLETIN
·
2020
·Vol. 78
·期 10
·5741-5753
·
IF 2.014
Yue Longlong,Xie Qian,Yang Yifeng,Li Jing,Li Xiancai
The preparation of a lanthanum ion-imprinted polymer is described via surface ion imprinting, with polyethyleneimine as the functional monomer and SBA-15 as the matrix material. Its structure was characterized and analyzed, and static adsorption experiments were carried out to determine the best experimental conditions for the adsorption of lanthanum ions. The effects of initial concentration, temperature, adsorption time and pH on the adsorption of lanthanum ion surface-imprinted polymer were investigated. In addition, the regeneration performance of La(III)-IIP-PEI/SBA-15 on lanthanum ion was studied and showed that La(III)-IIP-PEI/SBA-15 has strong specific recognition ability and high reuse performance.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2020
·
IF 4.551
Yue Zhang,Li Wang,Nan Wang,Guohua Gao,Zhiyong Pan,Baoning Zong
Monodispersed mesoporous SBA-15 silica was synthesized by adding n -decane to conventional synthesis recipe. Pd catalysts for 2-alkyl-anthraquinone hydrogenation were then prepared on the as-synthesized SBA-15 and characterized by scanning and transmission electron micrographs, X-ray diffraction, XPS spectroscopy and N 2 adsorption-desorption. At the molar ratio of n -decane to P123 (C10/P123) ranging between 120 and 240, monodispersed SBA-15, together with the shortened length of pore channels, expanded size of mesopores and decreased proportion of micropores could be obtained. The Pd catalyst on SBA-15 synthesized with 240 in C10/P123 exhibited the superior catalytic performance. The initial hydrogenation rate of 2-ethyl-, tert-butyl- and amyl-anthraquinone increases by approximately 300%, 183% and 150% compared with that on SBA-15 synthesized using a recipe without n -decane, with the selectivity to active anthraquinone of >99%.
研究领域:
化学工程
·
材料科学
·
催化
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）