COMPOSITES PART B-ENGINEERING
·
2018
·
IF 4.92
Lei Wang,Libo Zhang,Hongyi Li,Yubo Ma,Ronghui Zhang
A mesoporous SBA-15 supported sulfonic acid catalyst (SBA-15-SO 3 H) was successfully prepared and used for the selective conversion of fructose to 5-hydroxymethylfurfural (HMF). Up to 96% of HMF selectivity with 100% fructose conversion was obtained under mild conditions (120 °C, 60 min, DMSO as solvent). Solvent effect, reaction time, reaction temperature and fructose-to-catalysts mass ratio have been investigated. The SBA-15-SO 3 H solid acid catalyst can be separated from the reaction mixture after reaction and reused by simple centrifugalization, and 100% fructose conversion with 95% HMF yield could be retained. Further, reaction activation energy of 56.4 kJ/mol has been fitted with kinetic analysis , which means that the dehydration of fructose into HMF is relative easier over SBA-15-SO 3 H catalyst in this work. Besides, X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM) measurements reveal that the –SO 3 H grafting on the SBA-15 surface have no obvious influence on its mesoporous structure even after five catalytic cycles, and acid site measurements demonstrate that there was no significant loss of acid site concentration, indicating high catalytic stability. This fruit give a useful reference to chemical engineering and materials, besides future energy and smart city.
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2019
·
IF 6.393
Lan Guo,Yuan Liu,Rongmei Kong,Guang Chen,Hao Wang,Xiuli Wang,Lian Xia,Fengli Qu
β-Glucuronidase (β-GCU) is closely related to the occurrence of multiple diseases, and it has been applied as a biomarker and therapeutic target in clinical diagnosis. However, reliable methods with high selectivity and sensitivity for monitoring β-GCU are still lacked. Herein, we designed a novel fluorescent nanoprobe, rhodamine B encapsulated MOF-5 (RhB@MOF-5) for the first time, to detect β-GCU through the synergistic effect of inner filter effect (IFE) and static quenching effect (SQE) by employing 4-nitrophenyl-β-D-glucuronide (PNPG) as the substrate. After encapsulating into MOF-5, the fluorescence emission of RhB at 550 nm excited by 320 nm was greatly enhanced. The major overlap between the fluorescence excitation spectrum of RhB@MOF-5 (about 320 nm) and the ultraviolet absorption spectrum of PNPG (about 310 nm) lead to PNPG being a good IFE absorber in this sensing system. Under the optimized conditions, the excitation spectrum of the RhB@MOF-5 could be absorbed by PNPG, resulting in the dramatically decrease of fluorescence emission. After adding β-GCU into the system, the substrate of PNPG would be enzymatic hydrolyzed to p -nitrophenol (PNP) and glucose, then the IFE disappearance and the fluorescence recovered. The current sensing platform was interference-free and exhibited a broad linearity relationship for β-GCU range of 0.1–10 U L −1 (R 2 = 0.9957) with a limit of detection as low as 0.03 U L −1 , which was reduced by more than one orders compared with the reported methods. Moreover, the encapsulation of dyes using porous nanoparticles to achieve some tailor-made characteristics will enrich experimental design inspiration.
✓ 已验证
DOI
高影响因子
Biosensors-Basel
·
2022
·Vol. 12
·期 7
·544
·
IF 5.743
Jingyi Li,Ning Zhang,Xin Yang,Xinting Yang,Zengli Wang,Huan Liu
This study presents a novel composite thin film based on rhodamine B encapsulated into MOF-5 (Metal Organic Frameworks) as a fluorescence sensor for the real-time detection of the freshness of chilled pork. The composite film can adsorb and respond to the volatile amines produced by the quality deterioration of pork during storage at 4 °C, with the fluorescence intensity of RhB decreasing over time. The quantitative model used for predicting the freshness indicator (total volatile base nitrogen) of pork was built using the fluorescence spectra (excited at 340 nm) of the RhB@MOF-5 composite film combined with the partial least squares (PLS) algorithm, providing Rc2and Rp2values of 0.908 and 0.821 and RMSEC(root mean square error of calibration) and RMSEP (root mean square error of prediction) values of 3.435 mg/100 g and 3.647 mg/100 g, respectively. The qualitative model established by the partial least squares discriminant analysis (PLS-DA) algorithm was able to accurately classify pork samples as fresh, acceptable or spoiled, and the accuracy was 86.67%.
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2019
·Vol. 63
·期 2
·258-266
·
IF 5.636
Ma Bo,Zhao Jinping,Ge Zhenhua,Chen Yantao,Yuan Zhihao
Graphitic carbon nitride (g-C 3 N 4 ) coupled with NiCoP nanoparticles with sizes around 5 nm have been fabricated via a controllable alcohothermal process. NiCoP is an excellent electron conductor and cocatalyst in photocatalytic reactions. The coupling between tiny NiCoP nanoparticles and g-C 3 N 4 through in-situ fabrication strategy could be a promising way to eliminate the light screening effect, hinder the recombination of photo-induced charge carriers, and improve the charge transfer. The NiCoP/g-C 3 N 4 nanohybrids exhibit an excellent photocatalytic activity in the hydrogen generation, with a significantly improved performance compared with original g-C 3 N 4 , CoP/g-C 3 N 4 and Ni 2 P/g-C 3 N 4 , respectively. This study paves a new way to design transition metal phosphides-based photocatalysts for hydrogen production.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 39
·16877-16890
·
IF 3.288
Xiangbo Song,Chenguang Wang,Lungang Chen,Qiying Liu,Jianguo Liu,Yuting Zhu,Jun Yue,Longlong Ma
Ionic liquids (ILs) as additives were used in the selective conversion of bio-based carbohydrates to 5-hydroxymethylfurfural (HMF) in this work. The effect of adding various imidazole-based ionic liquids with different anion structures on the production of HMF from fructose was firstly investigated in aqueous media. The presence of 15 wt% 1-butyl-3-methylimidazole chloride ([Bmim]Cl) ionic liquids in water with Fe2(SO4)3 as the homogeneous catalyst provided a more effective HMF synthesis compared to that without [Bmim]Cl addition. The enhanced HMF yield was mainly attributed to the fact that [Bmim]Cl might play a vital role in stabilizing the HMF molecule, which could thereby suppress side reactions involving HMF (e.g., its rehydration to levulinic acid or/and polymerization to humins). NMR and FTIR analyses suggested that such a stabilization effect stemmed from the interaction of [Bmim]Cl with the hydroxyl and aldehyde groups of HMF through hydrogen bonding. By performing the operation in a biphasic system (i.e., with the biomass-derived THF solvent as the organic phase and the addition of NaCl salt into water for improving HMF partition), the HMF yield over the Fe2(SO4)3 catalyst in the presence of the [Bmim]Cl additive could be further improved. The catalyst and ionic liquids were quite stable, and could be reused for more than five cycles with a consistent activity. A similar enhancement effect of [Bmim]Cl was also demonstrated in HMF synthesis with better yields from other biomass feedstocks or derivatives (including glucose, sucrose, cellobiose, inulin and starch) in aqueous media.
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2018
·
IF 5.123
Ting Huang,Zaichun Liu,Yunlong Li,Yanqiu Li,Long Chao,Chao Chen,Yueming Tan,Qingji Xie,Shouzhuo Yao,Yuping Wu
Poly(5-hydroxytryptamine) (poly(5-HT)) is exploited as a new and efficient enzyme-immobilization matrix for amperometric and biofuel cell (BFC)-based biosensing. A GOx-poly(5-HT)-Pd nanoparticles (PdNPs) bionanocomposite is prepared by Na 2 PdCl 4 -initiated oxidized polymerization of 5-hydroxytryptamine (5-HT) in a neutral aqueous solution containing glucose oxidase (GOx), and this bionanocomposite and then chitosan (CS) are cast-coated on a Pd-plated Au electrode to yield a CS/GOx-poly(5-HT)-PdNPs/Pd plate /Au enzyme electrode. Scanning/transmission electron microscopy, UV–vis spectrophotometry and electrochemical quartz crystal microbalance are employed for material characterization and/or process monitoring. Under optimized conditions, the amperometric response of the enzyme electrode is linear with glucose concentration from 2.0 μM to 6.66 mM with a sensitivity of 110 μA mM −1 cm −2 , a limit of detection of 0.2 μM, and excellent operation/storage stability in the first-generation biosensing mode. The sensitivity is larger than those of some conventional electrodes under identical conditions. The enzyme electrode also works well in the second-generation biosensing mode. By using the enzyme electrode as the anode for glucose oxidation and a Pd plate /Au electrode as the cathode for KMnO 4 reduction, a monopolar BFC is constructed as a self-powered biosensor , the current response of which is linear with glucose concentration from 50 μM to 34.5 mM. Experiments also show that poly(5-HT) is a physical and chemical dual-immobilization matrix of enzyme, since the abundant amino groups in poly(5-HT) can be used for chemical bonding of GOx.
✓ 已验证
DOI
高影响因子
ADVANCED ENGINEERING MATERIALS
·
2020
·Vol. 22
·期 8
·2000267
·
IF 3.217
Hao Zou,Yi Zhou,Ye Xiang,Yuehong Deng,Yawen Tan,Haiqin Tang,Yifeng Xu
The formation of heterojunctions is an effective method to develop visible light-driven photocatalytic materials. A flower-like DUT-5@BiOBr composite is prepared by the hydrothermal method. The presence of a large number of heterojunctions in the 2D–2D interface accelerates the separation of photogenerated charges. When the mass ratio is 20%, the composite material shows the highest visible light catalysis and excellent stability in cycling experiments. The photocatalytic mechanism is analyzed by various characterization methods. The results show that the main active species in the photocatalytic process are superoxide radicals and holes and prove that the heterojunction that forms between DUT-5 and BiOBr is a type-II heterojunction. The synergy between the increase in specific surface area, the unique mesoporous structure, and the heterojunction promotes the speed of photocatalysis. Herein, new ideas are provided for the development of 2D–2D composite materials to degrade organic pollutants under visible light to solve environmental pollution.
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2016
·
IF 2.183
Shanshan Li,Xingwen Zhu,Jiang Li,Roman Yavetskiy,Maxim Ivanov,Binglong Liu,Wenbin Liu,Yubai Pan
Yttria (Y 2 O 3 ) nanopowders were synthesized by a normal precipitation method using (NH 4 ) 2 SO 4 as dispersing agent. Pure Y 2 O 3 powders without any other phase can be achieved by calcining the precursor at 600 °C for 4 h. The precursor and Y 2 O 3 powders were characterized by TG-DTA, XRD , SEM and BET. In this work, 5 at.%Yb : (La 0.1 Y 1.9 ) 2 O 3 transparent ceramics were made by vacuum sintering at 1650 °C for 10 h. The in-line transmittance of the 5 at.%Yb:(La 0.1 Y 0.9 ) 2 O 3 ceramics is 81.3% at the wavelength of 1031 nm. The absorption cross-sections of the sample are calculated to be 1.20 × 10 −20 cm 2 , 5.74 × 10 −21 cm 2 and 4.18 × 10 −21 cm 2 at 976, 951 and 906 nm, respectively. The emission cross-sections of the emission peak located at around 1031 and 1073 nm are 1.13 × 10 −20 and 0.42 × 10 −20 cm 2 , respectively.
✓ 已验证
DOI
高影响因子
ELECTROANALYSIS
·
2021
·Vol. 33
·期 12
·2452-2459
·
IF 3.223
Yuzhen Li,Lu Huang,Xuexiang Weng,Zhenmin Liu,Chunping You
The fast detection of 5-hydroxymethyl-2-furfural (HMF) in food industry is vital because of its toxicity and mutagenicity. A glassy carbon electrode (GCE) modified with black phosphorene (BP) nanosheets was prepared and coated with Nafion to improve stability. The electrode has excellent electrochemical stability and current response for HMF electroreduction. The good linear relationship is in the concentration range of 0.1–10 μg/mL with the detection limit of 0.012 μg/mL. HMF electroreduction is a diffusion-controlled process involving two electrons and two protons. The sensor was successfully applied to the measurement of HMF in milk with the recovery values of 92.92 %–96.33 %.
✓ 已验证
DOI
高影响因子
Catalysts
·
2016
·Vol. 6
·期 9
·134
·
IF 2.964
Songbai Qiu,Ying Xu,Yujing Weng,Longlong Ma,Tiejun Wang
A series of MCM-41 supported Ni catalysts with high metal dispersion was successfully synthesized by simple co-impregnation using proper ethylene glycol (EG). The acquired Ni-based catalysts performed the outstanding hydrogenolysis activity of guaiacol. The effects of the synthesis parameters including drying temperature, calcination temperature, and metal loading on the physical properties of NiO nanoparticles were investigated through the use of X-ray diffraction (XRD). The drying temperature was found to significantly influence the particle sizes of NiO supported on MCM-41, but the calcination temperature and metal loading had less influence. Interestingly, the small particle size (≤3.3 nm) and the high dispersion of NiO particles were also obtained for co-impregnation on the mixed support (MCM-41:HZSM-5 = 1:1), similar to that on the single MCM-41 support, leading to excellent hydrogenation activity at low temperature. The guaiacol conversion could reach 97.9% at 150 °C, and the catalytic activity was comparative with that of noble metal catalysts. The hydrodeoxygenation (HDO) performance was also promoted by the introduction of acidic HZSM-5 zeolite and an 84.1% yield of cyclohexane at 240 °C was achieved. These findings demonstrate potential applications for the future in promoting and improving industrial catalyst performance.
✓ 已验证
DOI
高影响因子
Energy Technology
·
2021
·Vol. 9
·期 9
·2100396
·
IF 3.631
Qinghua Ji,Chin Ping Tan,Abu ElGasim A. Yagoub,Li Chen,Dong Yan,Cunshan Zhou
Herein, a natural deep eutectic solvent (DES) is developed to deconstruct the recalcitrant structure of sugarcane bagasse (SCB) for further 5-hydroxymethylfurfural (5-HMF) production. The properties, structure of the DES, and the influence of pretreatment and reaction conditions on SCB are studied. The findings reveal that carboxylic acid DES pretreatment results in a substantial decrease of hemicelluloses and lignin. At the same time, carboxylic acid DES systems significantly improve the yield of 5-HMF at 110 °C. Under the optimum conditions (choline chloride (ChCl)–lactic acid (8.33 wt% H 2 O), SCB/DES (1:10/wt:wt), temperature 110 °C, and time 4 h), the 5-HMF yield obtained from SCB is 56.68 mol% (1.62 mg mL −1 ). This 5-HMF yield is significantly higher by 25.88, 16.43, and 9.87-folds compared to the 5-HMF yield from the SCB treated with ChCl–urea, ChCl–glycerin, and ChCl–ethylene glycol, respectively, under the same reaction conditions. In addition, component analysis and structural characteristics suggest that the content of lignin in the SCB decreases significantly, and the cellulose and hemicellulose are partially hydrolyzed after being treated with the DES composed of ChCl and carboxylic acids. Overall, this work shows that SCB pretreatment with a carboxylic acid DES is promising for low-cost biorefineries to achieve effective biomass fractionation and conversion.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Yuchi Zhang,Le Han,Bohan Li,Yan Xu
All-inorganic perovskite quantum dots (PQDs) CsPbX 3 (X = Cl and Br) are expected a new generation of promising luminescent materials with narrow-band emissions, color-tunability, and high photoluminescence quantum yields (PLQYs), but the instability towards humid environments and high temperatures restrict their practical applicability. In this work, a hierarchically structured zeolite (HSZ) of ZSM-5 (Si/Al = 50) featured micro-mesoporous cross-linked architecture was applied to encapsulate CsPbX 3 PQDs through a simple thermal diffusion strategy. The luminescence performances of CsPbX 3 PQDs hybridized ZSM-5 nanocomposites can be optimized in the hierarchical micro-mesoporous structures. Particularly, the CsPbBr 3 -HSZ ZSM-5 composite calcined at 700 °C exhibited highly water-stable luminescence performance with a full-width at half-maximum (FWHM) of 22 nm and a high photoluminescence quantum yield (PLQY, 62%), maintaining 92% of the initial emission intensity even after 100 days of immersion in water. The highly water-resistant and stable luminescent performance of the composite was attributed to the interconnected micro-mesoporous network of HSZ ZSM-5, in which micropores provide a shielding wall to isolate the CsPbBr 3 PQDs from the external environment and mesopores help to promote the diffusivity of precursors towards the successful space-confinement of CsPbX 3 (X = Cl and Br) PQDs. The temperature-dependent fluorescence intensity and spectral shift characteristics of CsPbBr 3 -HSZ ZSM-5 composite afford its capacity acting as dual-mode optical thermometers, and the water-stable latent fingerprint identification has been also demonstrated by applying the CsPbBr 3 -HSZ ZSM-5 nanocomposite.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）