ACS Omega
·
2021
·
IF 3.512
Ze Yuan,Lanlan Yang,Dongni Han,Guorong Sun,Chenyu Zhu,Yao Wang,Qiao Wang,Mikhail Artemyev,Jianguo Tang
High-efficiency photoluminescence quaternary hexagon Zn–Cu–In–S (ZCIS) nanoplatelets (NPls) have been synthesized by a two-step cation exchange method, which starts with the In2S3 NPls followed by the addition of Cu and Zn. It is the first time that In2S3 NPls are used as templates to synthesize ZCIS NPls. In this paper, the reaction temperature of In2S3 is essential for the formation of NPls. The photoluminescence wavelength of NPls can be tuned by adjusting the temperature of Cu addition. To enhance the stability of the resulting NPls and to improve their optical properties, we introduced Zn2+ and obtained ZCIS NPls by cation exchange on the surface. It is worth noting that the obtained ZCIS NPls show a shorter fluorescence lifetime than other ternary copper sulfide-based NPls. This work provides a new way to synthesize high-efficiency, nontoxic, and no byproduct ZCIS NPls.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Physical Chemistry C
·
2021
·
IF 4.126
Aqiang Liu,Chenghao Bi,Xuanhui Qu,Jianjun Tian
As an emerging optoelectronic material, colloidal lead halide perovskite nanocrystals (PeNCs) have attracted considerable interest, but the fundamental and crucial formation mechanism of PeNCs is still unclear due to the fast speed of the chemical synthesis. Here, we developed a novel stepwise method to explore the formation process of CsPbBr3 PeNCs. Polar alcohol was used to trigger the formation reaction of PeNCs, thereby controlling the reaction speed and achieving stepwise synthesis. Our work found that the synthesis of PeNCs undergoes three formation steps: PbBr3– complexes, PbBr64– octahedrons, and perovskite crystals. The PbBr3– complexes were first formed through the coordination of Pb2+ and Br– ions in the precursor solution and then were transformed into PbBr64– octahedrons by being triggered with the polar alcohol. Finally, the PbBr64– octahedrons reacted with the free-state Cs+ ions to form perovskites. The PbBr64– octahedrons should be formed first, otherwise the Cs+ ions are always in the free state in the precursor solution so that they cannot react with lead bromide complexes to form perovskite crystals. This study provides new insights into the formation process of PeNCs and new thinking for designing and constructing PeNCs.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2021
·
IF 5.097
Longhui Lin,Linghang Qiu,Feiming Li,Chaoyu You,Yimeng Zhu,Qiuhong Yao,Yibo Zeng,Yiru Wang,Jianfeng Li,Xi Chen
Lead halide perovskite nanocrystals (PNCs) have led to a growing number of studies focusing on electrochemiluminescence (ECL) due to their excellent optical characteristics, making them promising candidates as ECL emitters for high performance. However, because of their ionic salt nature, PNCs even protected by ligands will be dissolved rapidly in polar solvents as electrolytes. Meanwhile, the contact of interfaces among PNCs, the electrode, and the electrolyte (three-phase interface) is required to guarantee effective carrier transfer and sufficient excited-state species, leading to stable ECL signals and ultrasensitivity. Herein, a fast and convenient preparation method is first proposed for fabricating abundant three-phase interfaces by anchoring CsPbBr3 PNCs to graphene oxide (GO) functionalized with amino groups, which stabilizes the PNC structure and provides carrier transfer pathways. Consequently, the GO-assisted CsPbBr3 PNC three-phase interfaces exhibit brilliant ECL intensity in acetonitrile containing 10 mM tripropylamine (TPrA) and remain stable after more than 1 h continuous cyclic potential scans with an RSD of 6%. Finally, the method has been applied to detect cupric oleate with the detection limit down to the attomolar (10–18 M) level. This work further validates the vital role of interface state in PNCs’ ECL response and has potential in ultrasensitive analysis.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2021
·
IF 6.024
Qing Tian,Guozhen Ding,Yuting Cai,Zicheng Li,Xueyuan Tang,Rong-Jun Xie,Peng Gao
To pursue practical applications of perovskite solar cells (PSCs), while the power conversion efficiencies (PCEs) are continuously pushed up, defect passivation of the metal halide perovskite layer is considered an efficacious method for improving the efficiency and stability of the devices. Herein, we proposed incorporating iodine-rich CsPbI3 quantum dots (QDs) in the halide perovskite film to improve the photovoltaic performance of PSCs. Using the modified QDs enabled the reduction of the nonradiative recombination centers by passivating iodide vacancies and optimization of the energy alignment near to the perovskite/hole transport material interface. Finally, high-performance planar PSCs with an efficiency exceeding 22% and higher long-term stability (over 91% of its initial PCE after 39 days) were achieved.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Hanwen Zhu,Min Cheng,Junchun Li,Supeng Yang,Xuyong Tao,Yongqiang Yu,Yang Jiang
It has been proved that perovskite quantum dots (QDs) have great potential in optoelectronic devices because of their excellent optical performance. However, low stability against water and oxygen environment hinders the commercial application of down-conversion display films on account of its highly ionic nature and low formation energy. Here, we demonstrate a convenient method to obtain a uniform, large-area water-oxygen-resistant quantum dot-polymer composite film via illuminating FAPbBr 3 QDs and methyl methacrylate (MMA) under white light emitting diode. We find that FAPbBr 3 QDs act as photo initiators, leading to the polymerization of organic monomers around the quantum dots. The obtained FAPbBr 3 QDs-polymer nanocomposites are independently dispersed coated with about 10 nm thick polymerized methyl methacrylate (PMMA). Due to the well protection of covered PMMA, the FAPbBr 3 QDs/PMMA nanocomposites show high tolerance to water and oxygen, and the increased PLQY and lifetime indicate the reduction of non-radiative recombination centers. Furthermore, the FAPbBr 3 QDs/PMMA nanocomposites are easy to produce large area films, and no agglomeration during films production by knife coating process. Then uniform, strong fluorescence, transparent and stable blue, green and red nanocomposite films can be prepared by optimizing the viscosity via controlling the reaction time. Finally, white LED was fabricated with a Lumen Efficiency of 80.4 m/W and Color Rendering Index of 90. Our work suggests that illuminated polymerization of perovskite quantum dots under white light emitting diode provides a simple and effective method to commercialization
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Jie Guo,Qiang Hu,Min Lu,Asu Li,Xiaoyu Zhang,Ren Sheng,Ping Chen,Yu Zhang,Jinlei Wu,Yuhao Fu,Guang Sun,William W. Yu,Xue Bai
One-dimensional (1D) semiconductor nanorods (NRs) are very promising materials for light-emitting diodes (LEDs) due to their unique optoelectronic properties, while the research on 1D perovskite NRs is relatively rare. Herein, the 1D CsCdBr 3 perovskite NRs were synthesized by simple thermal injection method, in which the [CdX 6 ] 4- octahedra sharing opposite faces can form infinite linear chains along the c axis. But their low photoluminescence quantum yields (PL QYs) limit their application in LEDs. To improve the optoelectronic properties of CsCdBr 3 NRs, the PbBr 2 is chosen as the dopant to synthesize the Pb 2+ doped CsCdBr 3 perovskite NRs. When the molar ratio of PbBr 2 :CdBr 2 is 0.25, the perovskite NRs with the PL QYs of 48% and pure-blue emission centered at 459 nm were obtained. Furthermore, the optimized NRs were used as the emissive layer to fabricate a perovskite LED that is the only one blue perovskite LED based on 1D NRs. This device shows bright pure-blue emission with good spectral stability, suggesting that the 1D perovskite NRs are good choice to achieve next-generation lighting and display.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Ou Hai,Mengkang Pei,Enlong Yang,Qiang Ren,Xiulan Wu,Yujing Zhao,Liang Du
The single color of long afterglow luminescence materials is one of the important factors restricting its development. Here, we uniformly disperse all-inorganic cesium lead halide (CsPbBr 3 ) perovskite quantum dots (PeQDs) with strong stability on the surface of Sr 2 MgSi 2 O 7 :Eu 2+ ,Dy 3+ (SMS) to adjust the afterglow luminescence color. CsPbBr 3 PeQDs has high quantum yield, and its excitation spectrum (around 400–500 nm) overlaps with the emission spectrum (around 465 nm) of SMS, so that the tunable afterglow emission from blue (around 465 nm) to green (around 525 nm) can be achieved by controlling the dosage of CsPbBr 3 PeQDs, and its chromaticity coordinates can be from (0.1280, 0.1360) to (0.2010, 0, 7460). The quantum yield of the composite remains almost unchanged, and the luminescence intensity remains stable and does not decrease when the composite is irradiated by ultraviolet light for 2 h; When exposed to air, the luminescence property remained about 80 percent after 10 days. This study provides a research direction for the polychromatic adjustment of long afterglow luminescent materials.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2021
·
IF 8.198
Ya Chen,Xiaojuan Liang,Jianping Liu,Suqin Chen,Weidong Xiang
All-inorganic CsPbX3 perovskite nanocrystals (PeNCs) are being investigated intensively as a promising optoelectronic material. However, the issues of its intrinsic instability and toxicity restrict their commercial applications. Herein, we proposed a facile method to improve the stability of CsPbX3PeNCs by encapsulating in a superhydrophobic polymer poly(styrene–ethylene–butylene–styrene) (SEBS) matrix. The blue–green–red emission CsPbX3@SEBS (X = Cl/Br, Br, Br/I) composite films exhibit high stability against moisture and are thermally stable. It is worth noticing that the photoluminescent quantum yield (PLQY) of the CsPbBrI2@SEBS composite film can reach 60%. The SEBS polymer matrix not only protects the PeNCs from contact with the ambient surroundings but also inhibits the escape of lead ions. Notably, the CsPbX3@SEBS flexible films were used as color conversion materials to construct a light-emitting diode (LED) device, and the device exhibits a wide color gamut (113% of the National Television System Committee (NTSC)). This work demonstrates the potential of using CsPbX3@SEBS flexible films as highly efficient color conversion materials for white LED and backlight displays.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Bo Zhang,Yuanyuan Tian,Fengfeng Chi,Shengli Liu
The nitrogen-doped carbon embedded nanoporous TiO 2 electrode is synthesized by a sol-gel technique assisted the amide condensation reaction for multifunction electrochromic energy storage device. By controlling the content of oleylamine (2.0 wt %), the nitrogen-doped carbon embedded nanoporous TiO 2 film has the optimal surface nanoporous morphology (2.0OL-TiO 2 ) and the excellent electrochromic energy storage properties, such as the high coloration efficiency (69.6 cm 2 C −1 ), the short switching time (bleaching time of 4.7 s and coloration time of 5.6 s) and the large specific capacitance (127.5 F g −1 ) at a current density of 2 A g −1 . These fascinating properties are mainly attributed to the optimal surface nanoporous morphology which can improve the electrochemical activity. Here, the nanoporous structure is generated by the evaporation of water molecules which are formed in the amide condensation reaction. In addition, the nitrogen-doped carbon leads to an enhancement in electrical conductivity during the multimeric amide condensation reaction. The results show that the nitrogen-doped carbon can provide adequate ion and electron transport pathways. Therefore, it is worth believing that the research is of great significance to realize the electrode design of multifunctional electrochromic energy storage device.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Peng Wang,Hao Cui,Chengxin Wang
Although Pt-based alloy catalysts have been considered promising candidates for fuel cell applications, constructing highly efficient, multifunctional Pt-based catalysts that simultaneously boost the three key reactions (MOR, ORR and HOR) in proton exchange membrane fuel cells (PEMFCs) remains a huge challenge. Herein, PtMo-CeO x hybrids with interesting ultrathin and ultralong nanowire assemblies (NAs) structure are synthesized by a one-pot solvothermal method without templates. The PtMo-CeO x -NAs catalyst exhibits 5.2-fold, 6.9-fold and 2.4-fold higher mass activity than commercial Pt/C towards the MOR, ORR and HOR simultaneously and shows excellent durability and CO poisoning tolerance. Detailed experiments reveal that the enhancement should be due to strain and ligand effects. Most impressively, when PtMo-CeO x -NAs membrane electrode assemblies (MEAs) fabricated by a catalyst-coated method are used both as the anode and cathode in PEMFCs, the performance of fuel cells is dramatically boosted compared to those with Pt/C.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHEMISTRY COMMUNICATIONS
·
2021
·
IF 4.724
Lin Tang,Jinliu Wei,Zhixiong Cai,Feiming Li,Maosheng Zhang,Xiaomei Chen,Xi Chen
The electrochemical behavior and consequent luminescence properties of Mn-doped CsPbCl 3 perovskite (Mn:CsPbCl 3 ) nanocrystals (NCs) were investigated by cyclic voltammetry (CV) and electrochemiluminescence (ECL) measurements. Mn:CsPbCl 3 NCs could be electrochemically injected with electrons or holes at different potentials to produce ECL through both annihilation and coreactant routes. Importantly, it has been found that the ECL involving the coreactant could originate from two pathways: energy recombination at the surface, and energy transfer from the excited CsPbCl 3 host to the dopant center, producing emission via Mn d - d transition, which is different from the photoluminescence (PL) of Mn:CsPbCl 3 NCs alone, which contains dual emissions from both the host and the dopant.
✓ 已验证
产品关联
DOI
高影响因子
Materials Chemistry Frontiers
·
2021
·Vol. 5
·期 16
·6152-6159
·
IF 6.482
Xudong Hu,Yuelei Li,Ye Wu,Weiwei Chen,Haibo Zeng,Xiaoming Li
Copper halide Cs3Cu2X5 (X = Cl, Br, I) nanocrystals (NCs) have become a research hotspot in recent years. Compared with perovskite NCs, they have a large Stokes shift with a self-absorption-free effect and convenient solution processability, which endows them with potential applications in high-resolution flexible X-ray imaging and ultraviolet detection. However, the synthesis of Cs3Cu2I5 NCs is limited to the hot-injection method, which needs tedious operation procedures. Here, a one-pot fabrication strategy was designed based on the principle of chemical potential and thermodynamic equilibrium to achieve the mass production of Cs3Cu2I5 NCs. With the assistance of I−, Cs3Cu2I5 NCs were successfully fabricated with a reaction yield of about 70%, with the emission peak located at 445 nm and a high photoluminescence quantum yield (PLQY) of 72.6%. By scaling up the initial reaction volume tenfold, we successfully demonstrated mass production. Furthermore, Cs3Cu2Br5 and Cs3Cu2Cl5 NCs were also fabricated using this approach, indicating the versatility of this method. This strategy effectively optimizes the experimental process and cost, providing convenience for subsequent research based on this kind of material, such as optical electronic devices, ion-doping studies and so on.
✓ 已验证
产品关联
DOI
高影响因子