文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第877至888个,产品总数1,069个

设置提升方向
K
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2021 · IF 2.694

Measurement of Thermal Diffusivity of n-Pentane from (293–573) K and up to 10.0 MPa in the Near-Critical and Supercritical Regions

Hongwei Xing,Junshuai Chen,Yongbo Zhang,Libin Chen,Maogang He,Ying Zhang

Transport properties of n-pentane are so scarce that it prevents the further studies of n-pentane as an important component of industrial fluids, especially in the near-critical and supercritical regions. In this work, the thermal diffusivity of n-pentane was measured by the dynamic light scattering method within the temperature limits of (293–573) K along six isobaric lines at p = (0.1, 3.0, 3.5, 5.0, 7.5, and 10.0) MPa. The relative uncertainty of the thermal diffusivity experimental system is estimated to be 2.6% for a coverage factor of k = 2 with a level of confidence of 0.95. The influences of temperature and pressure on thermal diffusivity were presented. Besides, we compared the experimental data with the calculated values from the thermal conductivity model proposed by Vassiliou et al. and the multiparameter equation of state proposed by Span and Wagner. The absolute average of relative deviation and maximum deviation between the experimental data and the calculated results are 1.12 and 3.74%, respectively.

CAS / MDL: 109-66-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PROGRESS IN ORGANIC COATINGS · 2023 · IF 6.6

A novel multilayer film based on sodium alginate/k-carrageenan-gelatin incorporated with ZnO nanoparticles and oregano essential oil for active food packing

Xingguo Zhang,Baoxue Zhang,Rongrong Mao,Zulong Huang,Keyan Jing,Changchun Jin,Bin Yang,Jun Qi,Manman Yu,Guoyuan Xiong,Yong Hu

Multi-layer active food packing films fabricated with outer layer made of sodium alginate (SA) and inner layer made of k -carrageenan (CAR) and gelatin (GEL) contained with oregano essential oil (OEO) and ZnO nanoparticles (ZnO NPs) were developed through layer-by-layer (LBL) assemble method and characterized in this study. The results of fourier transform infrared (FT-IR) demonstrated OEO, ZnO NPs and SA outer layers were successfully incorporated into the multi-layer film system by hydrogen bonding . ZnO NPs significantly improved the mechanical properties , thermal stability, UV resistance and retention of OEO of the films ( P  < 0.05). Scanning electron microscope (SEM) images clearly showed SA/CAR-GEL-OEO film and SA/CAR-GEL-OEO-ZnO NPs film had a bilayer structure. Noteworthy, the multi-layer films exhibited higher OEO retention compared to the mono-layer films, and compensated the negative effect of ZnO NPs and OEO on the light transmittance while enhancing the UV resistance of the films. The multi-layer films exhibited stronger antioxidant and antibacterial activity than mono-layer films. To summarize, the multi-layer films loaded with OEO and ZnO NPs enhanced antioxidant and antibacterial activities and displayed great potential as active packaging for food preservation.

CAS / MDL: 1314-13-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano-Micro Letters · 2021 ·Vol. 13 ·期 1 ·1-14 · IF 16.419

Wire-in-Wire TiO2/C Nanofibers Free-Standing Anodes for Li-Ion and K-Ion Batteries with Long Cycling Stability and High Capacity

Su Die,Pei Yi,Liu Li,Liu Zhixiao,Liu Junfang,Yang Min,Wen Jiaxing,Dai Jing,Deng Huiqiu,Cao Guozhong

The unique wire-in-wire structure endows TiO 2 /C nanofibers film with superior mechanical flexibility. The wire-in-wire TiO 2 /C nanofibers (TiO 2 ww/CN) film shows outstanding electrochemical performances as free-standing anodes for Li/K-ion batteries and full cells. The TiO 2 ww/CN film shows an extremely high pseudocapacitance contribution ratio in K-ion batteries.

CAS / MDL: 128-69-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL THERMODYNAMICS · 2021 · IF 3.178

Volumetric properties and viscosity for the ternary system of (1-pentanol + ethylcyclohexane + methyl myristate) and corresponding binary systems at T = 293.15–323.15 K

Dan Li,Yujia Zheng,Jingying Wang,Yan Pang,Meifang Liu

Densities and viscosities of ternary system (1-pentanol + ethylcyclohexane + methyl myristate) and the corresponding binary systems, (1-pentanol + ethylcyclohexane), (1-pentanol + methyl myristate), and (ethylcyclohexane + methyl myristate) were determined at different temperatures from 293.15 to 323.15 K. The experimental data were further employed to calculate excess molar volume ( V m E ) and viscosity deviation (Δ η ). Over the whole composition range, the V m E values show positive deviations from ideal behavior and the Δ η values are negative. The V m E values for the ternary mixtures were also correlated with the corresponding binary data using Cibulka and Redlich–Kister equations, respectively. The experimental data and results provide useful base data for further thermodynamic studies of alcohol–biodiesel–diesel blends.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Inorganic Chemistry Frontiers · 2021 ·Vol. 8 ·期 24 ·5270-5276 · IF 6.569

ACs5Bi4(PO4)2(P2O7)3 (A = K, Rb and Cs) with two kinds of isolated P–O groups designed by dimensional reduction theory

Shiwei Liu,Jiale Chen,Hongping Wu,Hongwei Yu,Zhanggui Hu,Jiyang Wang,Yicheng Wu

The dimensional reduction theory is applied to an A2O–P2O5–Bi2O3 system where P2O5 serves as a binary parent while A2O and Bi2O3 are regarded as dimensional reduction agents. Thus, three novel phosphates ACs5Bi4(PO4)2(P2O7)3 (A = K, Rb and Cs) have been prepared through the high-temperature solution method. Single-crystal X-ray diffraction measurements reveal that they all crystallize in the monoclinic space group P21/c (no. 14) and in their structures, two different kinds of P–O units, i.e. isolated PO4 tetrahedra and P2O7 dimers, are interconnected by Bi–O groups to construct a 3∞[Bi4(PO4)2(P2O7)36−] framework. Note that with the change of cationic size in their structures, the Bi3+ cations also exhibit flexible coordination, i.e. BiO5 and BiO6 polyhedra in KCs5Bi4(PO4)2(P2O7)3 and only BiO6 polyhedra in Cs6Bi4(PO4)2(P2O7)3, suggesting that combining the flexible coordination of Bi3+ cations with phosphates based on dimensional reduction theory is an effective strategy to guide the synthesis of new compounds.

CAS / MDL: 584-08-7 1304-76-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2020 · IF 2.369

Thermodynamic Models for Determination of Solid–Liquid Equilibrium of the Sarafloxacin Hydrochloride in Pure and Binary Organic Solvents from (278.15 to 333.15) K

Meng Cheng,Xin Zhao,Aixiang Hao,Wenhao Jiao,Wenge Yang,Yonghong Hu

In this study, the gravimetric method was taken to measure the solubility of the sarafloxacin hydrochloride under atmospheric pressure in methanol, isopropanol, ethanol, 1-butanol, acetonitrile, n-hexane, ethyl acetate, and N,N-dimethylformamide as well as in the (ethyl acetate + acetonitrile), (methanol + n-hexane), and (ethyl acetate + n-hexane) mixtures from 278.15 to 333.15 K. The solubility of sarafloxacin hydrochloride increased with increasing temperature in all the solvents. The solid–liquid solubility equilibrium data in the pure and mixed solvents were in apparent agreement with the solubility predicted by the modified Apelblat model, Buchowski–Ksiazaczak λh model, Redlich–Kister (CNIBS/R-K) model, and Jouyban–Acree model. However, the Redlich–Kister (CNIBS/R-K) model best simulated the experimental solubility results.

CAS / MDL: 91296-87-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2020 · IF 2.369

Solubility Measurement and Data Correlation of Clopidogrel Hydrogen Sulfate (Form I) in Four Binary Solvents Systems at Temperature from 278.15 to 318.15 K

Yanbo Liu,Mingyang Chen,Jiawei Lin,Maolin Li,Kang Li,Zhenguo Gao

Experimental solubility data of clopidogrel hydrogen sulfate (form I) in four binary solvents (1-propanol + isopropyl acetate, 2-propanol + isopropyl acetate, 1-butanol + isopropyl acetate, and 2-butanol + isopropyl acetate) was measured by using the laser dynamic method at the temperature ranging from 278.15 to 318.15 K. The experimental results showed that the solubility of clopidogrel hydrogen sulfate (form I) increased with the increasing temperature of all four binary solvent systems at the constant solvent composition, and the isopropyl acetate had a negative effect on the solubilities. The solubilities of clopidogrel hydrogen sulfate (form I) were correlated by the modified Apelblat, λh, and NRTL equations. The results indicated that the three models can predict the experimental values satisfactorily. Moreover, the modified Apelblat equation achieves the best fitting performance compared with other two models through calculating the value of average relative deviation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2021 · IF 2.694

Isothermal Vapor–Liquid Equilibria of the Absorption Working Pairs (R1234ze(E) + NMP and R1234ze(E) + DMETrEG) at Temperatures from 293.15 to 353.15 K

Gongran Ye,Yibo Fang,Yalun Li,Zhikai Guo,Lin Wang,Xiaohong Han

The absorption refrigeration system (ARS) was important for energy saving, which can be driven by low-grade energy. In this work, the mixtures of trans-1,3,3,3-tetrafluoropropene (R1234ze(E)) + N-methyl-2-pyrrolidone (NMP) and R1234ze(E) + triethylene glycol dimethyl ether (DMETrEG) were considered as the promising new working fluids for ARS. The vapor–liquid equilibrium (VLE) data of R1234ze(E) + DMETrEG and R1234ze(E) + NMP binary mixtures were measured using a liquid-recirculation apparatus from 293.15 to 353.15 K. The VLE data were correlated by the five-parameter non-random two-liquid activity coefficient model, and the correlated results showed a good agreement with the experimental VLE data. The average absolute relative deviation and maximum absolute relative deviation of the pressure were 1.70 and 5.11% for R1234ze(E) + NMP and 1.30 and 3.22% for R1234ze(E) + DMETrEG, respectively. The two binary mixtures exhibited positive deviations from Raoult’s law.

CAS / MDL: 872-50-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR LIQUIDS · 2021 · IF 6.165

Ternary (liquid + liquid) equilibrium experiment and thermodynamic modeling for extraction of diethoxymethane from water with different solvents at 303.2 K under 101.3 kPa

Qingsong Li,Hongyue Guo,Song Lin,Yicong Zhao,Hui Li

To separate and purify diethoxymethane (DEM) from water, in 101.3 kPa and at 303.2 K, the liquid-liquid equilibria (LLE) data of water + DEM + solvents (p-xylene, isopropyl ether, ethyl acetate and isooctyl alcohol) were obtained. The ability to extract DEM from water was evaluated by distribution coefficient (D) and separation coefficient (S). The LLE data were tested by the Bachman and Hand equations with the linear coefficient was greater than 0.99. As well as correlated by the NRTL and UNIQUAC thermodynamic models with the RMSD are no greater than 0.70%.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2019 · IF 2.298

Study on the Phase Equilibrium of Na+, K+//Cl–, CO32––H2O and Single-Salt of Potassium Separation with the Aid of Compressed CO2

Zhongshu Li,Yuli Xue,Xiaoling Tan,Wenqing Li,Shaonan Xu,Ziyan Wang,Jian Wang,Lina Li,Shiding Miao

It is of great importance to separate potassium salts from carbonate-based lakes, especially the low-[K+] but high-[Na+] brine which has been discovered around the world. Here the phase diagram of the quaternary system Na+, K+//Cl–, CO32––H2O was experimentally studied at 298.15 K via the method of isothermal evaporation, and the results corrected the previous diagram reported by Blasdale (J. Am. Chem. Soc.1923, 45, 2935–2946). The type of salts appeared and their solubility during the evaporation, and the density vs composition diagram and the pH values were plotted based on the experimental data. It was found that there were six invariant points, seven univariant curves, and five crystallization fields in the equilibrium phase diagram. To extract single-salt of potassium, certain areas in the Na+, K+//Cl–, CO32––H2O diagram were chosen to be acidified by the compressed CO2, and potassium in the form of KHCO3 was precipitated from the mother solution. The compressed CO2 was able to avoid formation of NaKCO3·6H2O during evaporation of the original system Na+, K+//Cl–, CO32––H2O. Based on experiment data, the region area for potassium salt extraction was determined, and this area was suitable for extracting K+ salts from brines with a [Na+/K+] ratio even lower than 0.44. This strategy opened a new way to recovery of potassium with a maximum yield of 59.88% from the carbonate-chloride-based brine.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2019 · IF 2.298

A Volumetric and Viscosity Study for the Binary Mixtures of Ammonium-Based Asymmetrical Gemini Ionic Liquids with Alcohols at T = 293.15–333.15 K

Xuzhao Yang,Yun Fang

In this work, the experimental densities and dynamic viscosities of binary mixtures of ammonium-based room-temperature asymmetrical Gemini ionic liquids (GILs) 1-trimethylammonium-3-(pyridinium) propane bisdicyanamide ([N111C3Py][DCA]2) and 1-trimethylammonium-3-(1-methylpiperidinium) propane bisdicyanamide ([N111C3MPi][DCA]2) with methanol (MeOH) or ethanol (EtOH) over the entire concentration range were, respectively, determined experimentally at temperatures of (293.15, 303.15, 313.15, 323.15, and 333.15) K in the atmospheric pressure of 0.1 MPa. The excess molar volumes (VmE), excess dynamic viscosities (Δη), and excess Gibbs energy of activation (ΔG*E) of the mixtures were evaluated according to the experimental ρ and η values of pure [N111C3Py][DCA]2, [N111C3MPi][DCA]2, MeOH, EtOH, and their binary solutions at the investigated temperatures and pressure. The change of VmE and Δη were correlated with the Redlich–Kister-type expression and optimal fitting parameters were evaluated. It was observed that values of VmE and Δη are negative deviations from ideal behaviors for the four binary systems. With the mole fraction of alcohol decreasing, these excess properties for these mixtures exist as more negative deviations from ideal solutions, until minimum excess values are reached. Negative values of VmE and Δη for the four binary solutions indicate stronger interactions between GIL and alcohol molecules compared to the pure components and better packing owing to the differences in size and shape of the investigated molecules. Positive values of ΔG*E can be ascribed to the size effect of mixing components. Meanwhile, the dependence of these excess properties on temperature for all binary systems indicates that the temperature has a great influence on intermolecular interactions in the studied mixtures.

CAS / MDL: 64-17-5 67-56-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2019 · IF 7.015

Promising transport and high-selective separation of Li(I) from Na(I) and K(I) by a functional polymer inclusion membrane (PIM) system

Chunqing Cai,Fan Yang,Zhigang Zhao,Qiuxia Liao,Ruixi Bai,Wanghuan Guo,Peng Chen,Yang Zhang,Hao Zhang

This paper first reports on the high-selective separation and recovery of Li(I) from Na(I) and K(I) using the polymer inclusion membrane (PIM) system containing both thenoyltrifluoroacetone (TTA) and trioctylphosphine oxide (TOPO) as the carrier molecules, and cellulose triacetate (CTA) as the base polymer. To characterize the PIM, we used Fourier Transform infrared (FT-IR) spectroscopy, scanning election microscopy (SEM) and thermogravimetric analysis (TGA). The optimized results of this work showed that initial flux ( J 0 ) J0) of Li(I) that was as high as 1.04  × ×  10 −2  mol m −2  h −1 , corresponding to permeability ( P P ) of 3.62  × ×  10 −3  m h −1 , were recorded using the PIM composed of 50 wt% CTA and 26.74 wt% TTA + 23.26 wt% TOPO from a feed phase containing Li(I), Na(I) and K(I) in an alkaline chloride solution into an acceptor phase containing 0.1 M HCl. Li(I) was transported successfully to the acceptor phase but Na(I) and K(I) barely passed in the first 20 h. The separation factor ( S F SF ) of Li(I) over the Na(I) and K(I) respectively ( S F L i ( I ) / N a ( I ) ≒ SFLi(I)/Na(I)≒ 54.25, S F L i ( I ) / k ( I ) ≒ SFLi(I)/k(I)≒ 50.60) demonstrated that Li(I) can be high-selectively separated. It is expected that this membrane can be applied for selective recovery of Li(I) from salt lakes or sea water that contains significant concentrations of Na(I) and K(I).

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。