ChemistrySelect
·
2025
·Vol. 10
·期 12
·e202500499
·
IF 2
Tianzhu Shao,Qi Wang,Jiahao Wei,Gonggang Sun,Xinbao Li
Graphical The study focuses on the synthesis of SCR catalysts with high activity and excellent alkali resistance. The redox performance and surface acidity of VWTi are enhanced and the atomic valencies is optimized through the doping of Ce and Bi. Therefore, the catalytic activity of the catalyst is significantly enhanced and excellent catalytic activity is maintained even after KCl poisoning. Ce-doped V 2 O 5 -WO 3 /TiO 2 (CeVWTi) and its subsequent modifications have been recognized as effective catalysts for the selective catalytic reduction of NO. Herein, CeVWTi catalysts doped with varying amounts of bismuth sulfate (Bi 2 (SO 4 ) 3 ) were synthesized and evaluated for their activity and alkali resistance. These catalysts were characterized using XPS, BET, SEM, H 2 -TPR, NH 3 -TPD, and XRD techniques. The optimal doping level of Bi 2 (SO 4 ) 3 was 1 wt.%. The NO conversion rate of the catalyst co-doped with Ce and Bi was 71.6% under the reaction conditions of 300 °C, gas hour space velocity (GHSV) = 200,000 h −1 with a gas composition of 550 ppm NO, 550 ppm NH 3 , 5.6% O 2 , and N 2 as the balance. The NO conversion efficiency of the Bi 0.01 CeVWTi catalyst was maintained at 90.7% after the addition of 1 wt.% KCl poisoning under the reaction conditions of 350 °C, GHSV = 200,000 h −1 , 550 ppm NO, 550 ppm NH 3 , 5.6% O 2 , and N 2 as the balance. Characterization showed that, despite the reduction in the specific surface area of the catalyst and some acidic sites due to Bi doping, the redox performance of Bi 0.01 CeVWTi was significantly enhanced. The excellent redox performance was maintained even after KCl poisoning.
✓ 已验证
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2025
·
IF 7.2
Haiying Xin,Liyan Xue,Mengtong Ma,Ke Song,Qiyong Deng,Zhiyi Wang,Minzhong Huang,Fan Yang
To mitigate the urban heat island effect, align with the “double carbon strategy”, and address the issues of coating aging and mildew on building facades, multifunctional ternary entropy-regulatory tungstate ceramic cool pigments (Ce x Ho 0.1 Gd 1.9– x W 2 O 9+ δ ) were prepared by high-temperature solid-phase method in this study. While ensuring the high near-infrared (NIR) solar reflectance, the anti-ultraviolet (UV) aging and antimycotic performance of rare earth given to pigment were evaluated, and its optical properties, microstructure and practical application effects were deeply explored. The results indicate that ternary entropy regulation changes the color of the pigment from white to yellow, significantly reducing the band gap from 3.28 to 1.90–1.87 eV. Specifically, the Ce 0.2 Ho 0.1 Gd 1.7 W 2 O 9+ δ pigment exhibits excellent chromatic properties ( L * = 73.79, a * = 20.21 and C * = 50.51) and a high NIR solar reflectance (96.23%). Infrared thermography confirms that it has a good cooling effect, with temperatures of 3.5 °C lower than the commercially available coating of similar color. Furthermore, the performance of multifunctional integration is that the pigments show enhanced absorption in the UVA (long-wave ultraviolet 320–400 nm) range, with an increase in average light absorption from 0.19 to 0.91 and a substantial increase in antimycotic rate from 42.86% to 97.46%. At the same time, this material has good acid and alkali resistance (Δ E * ≤ 2.41). The successful development of the multifunctional cool pigment materials opens a new way to energy-saving architectural wall coating materials.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·
IF 2.5
Lei Dong,Yangyang Yuan,Shengjie Zhu,Peidong Li,Xiaomin Zhang,Yanping Chen,Lei Xu
Direct synthesis of dimethyl carbonate (DMC) using CO2 and methanol as raw materials is an environmentally friendly and promising route for recycling carbon sources from exhaust gases. Herein, well-constructed CeO2-based nanoparticle catalysts promoted by various Fe contents were synthesized via a facile co-precipitation method and demonstrated to be highly effective for direct DMC synthesis. The uniform doping of iron species in ceria lattice resulted in the formation of more surface oxygen vacancies, and thereby more coordinatively unsaturated surface metal cations and lattice oxygen anions were generated, which served as the Lewis acidic-basic sites required for the reaction. Based on in-situ DRIFTS results, it was deduced that the oxygen vacancies played a crucial role in activating CO2 to reactive bidentate carbonates and the formation of active terminal methoxy intermediates was also enhanced by Fe incorporation. Consequently, the maximum DMC yield of 3.84 mmol h-1 g-1 cat was obtained on Fe0.04Ce0.96Ox under relatively mild reaction conditions of 130 °C and 3.0 MPa. Additionally, in the tandem reaction system using 2-cyanopyridine (2-CP) as a dehydrating agent, the catalytic activity for 2-CP hydration was found to be closely associated with the total basicity of the catalysts, and in turn a higher hydration rate was more conducive to the DMC synthesis through enhancing in-situ water removal efficiency. As expected, the present work provides in-depth insights into the structure-performance relationship of Fe-modified ceria-based catalysts for direct DMC synthesis from CO2 and methanol, and offers meaningful guidance for the advancement of highly efficient catalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Kunli Song,Shuqi Zhao,Zhenguo Li,Kaixiang Li,Yurong Xu,Yijun Zhang,Yonghong Cheng,Jian-Wen Shi
SSZ-13 has been commercialized as a catalyst in diesel engines for the selectivity catalytic reduction of nitrogen oxides (NO x ) with ammonia (NH 3 -SCR), but the catalyst is facing the problem of poisoning. Herein, two well-designed catalysts, Cu-SSZ-13 and cerium (Ce) doped Cu-SSZ-13 are synthesized, and their tolerance to zinc (Zn) and phosphorus (P) poisoning alone and together are explored in detail. The research found that Zn and P poisoning alone leads to the destruction of Cu-SSZ-13 structure, resulting in the decline of denitration (de-NO x ) performance following the mechanism dominated by Eley-Rideal (E-R). Surprisingly, it is found that zinc phosphate particles are formed at inactive sites on the surface of Cu-SSZ-13 in the presence of Zn and P together, which protects the active sites, enhances the adsorption of nitric oxide. As a result, the excellent de-NO x performance of Cu-SSZ-13 is well maintained following the dual mechanism of E-R and Langmuir-Hinshelwood (L-H). In addition, the introduction of Ce stabilizes the active sites, so as to improve the de-NO x performance and the poisoning tolerance of Cu-SSZ-13. This work deeply analyzes the reasons of Zn and P poisoning and the positive effect of Ce on Cu-SSZ-13, which provides ideas for improving the poisoning tolerance of Cu-SSZ-13 and promotes the further application.
✓ 已验证
DOI
PubMed
高影响因子
Molecular Catalysis
·
2017
·
IF 0
Peng Sun,Rui-tang Guo,Shu-ming Liu,Shu-xian Wang,Wei-guo Pan,Ming-yuan Li,Shuai-wei Liu,Jian Liu,Xiao Sun
CeSmOx mixed oxide catalysts supported on TiO 2 prepared by coprecipitation method were used for selective catalytic reduction of NOx with NH 3 . The results showed that the addition of Sm could effectively enhance the low-temperature SCR activity and SO 2 /H 2 O resistance of Ce/TiO 2 catalyst, and the appropriate mole ratio of Sm to Ce was 0.3. Characterization results indicated that the introduction of Sm could promote the formation of Ce 3+ and chemisorbed oxygen species on catalyst surface, which was favorable to the generation of NO 2 . Moreover, the doping of Sm could also promote the adsorption of NH 3 and NOx species on Ce/TiO 2 catalyst. The results of in situ DRIFT study revealed that the NH 3 -SCR reaction over CeSm/TiO 2 -0.3 catalyst was mainly controlled by the Langmuir−Hinshelwood mechanism in the low temperature range (<200 °C). Thereafter, the promoted NO oxidation and the enhanced NH 3 adsorption should play a major role for the excellent low-temperature SCR performance of CeSm/TiO 2 -0.3 catalyst.
✓ 已验证
DOI
Arabian Journal of Chemistry
·
2022
·
IF 6.212
Run Yuan,Yihe Qin,Can He,Zichen Wang,Lu Bai,Hong Zhao,Zijian Jiang,Lingyao Meng,Xuwen He
It is important to develop a catalyst that has high catalytic activity and can improve the degradation efficiency of refractory organic pollutants in the catalytic ozonation process. In this study, Fe-Mn-Cu-Ce/Al 2 O 3 was synthesised via impregnation calcination for catalytic ozonation of bio-treated coking wastewater. The physical and chemical characteristics of the catalysts were analysed using X-ray diffraction (XRD), X-ray fluorescence spectrometry (XRF), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller nitrogen adsorption–desorption methods. The effects of catalyst dosage, pH, and reflux ratio on the degradation efficiency of wastewater were examined in laboratory-scale experiments. The chemical oxygen demand (COD) removal rate of bio-treated coking wastewater was estimated to be 52.76 % under optimal conditions. The experiments on the catalytic mechanism demonstrated that the surface hydroxyl formed by the Lewis acid sites on the surface of the catalyst can react with ozone as the active site forming the active oxygen (·OH, ·O 2 – , and 1 O 2 ), thereby efficiently degrading the organic pollutants in coking wastewater. Furthermore, a pilot-scale experiment on the catalytic ozonation of bio-treated coking wastewater was carried out using an Fe-Mn-Cu-Ce/Al 2 O 3 catalyst, while the effects of the initial pollutant concentration, ozone concentration, and gas flow on the COD removal rate were studied on a pilot scale. It was found that the COD removal rate of the wastewater was ∼ 60 % under optimal parameters. After the treatment, the wastewater steadily reached the coking wastewater discharge standard (COD < 80 mg/L), while the operating cost of catalytic ozonation reached ∼ 0.032$/m 3 , thereby paving the way toward economic engineering applications. The COD degradation kinetics in the bio-treated coking wastewater followed pseudo-second-order kinetics. Three-dimensional fluorescence and gas chromatography–mass spectrometry revealed that macromolecular organic pollutants in the bio-treated coking wastewater were greatly degraded. In summary, Fe-Mn-Cu-Ce/Al 2 O 3 exhibited good reusability, high catalytic activity, and low cost and has a wide application prospect in the treatment of coking wastewater.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Xuan Liu,Hao Guo,Jilai Xue,Zengjie Wang,Yanan Zhang,Xiang Li
Al-7Si-0.8Sc-0.6Ce alloys were prepared with combined addition of low-cost Ce and high-priced Sc through molten salt electrolysis with controlled cooling process. The phases of as-casted alloys consisted of α-Al, eutectic silicon , ternary AlSi 2 Sc 2 and CeAl 2 Si 2 . Rapid cooling transformed the huge hollow ternary AlSi 2 Sc 2 blocks (300–500 µm) into fine Al 3 Sc particles (dozens of μm), and simultaneously refined the AlSi 2 Sc 2 with reducing its interlayer thickness from 15.26 µm down to 1.94 µm (the cooling rate from 0.05 K s −1 up to 30 K s −1 ). The eutectic Si became fine fibrous-like clusters and the thickness of CeAl 2 Si 2 phase reduced by 62.6 % when the cooling rate reached 30 K s −1 . Micro-hardness measurement and first principles-based calculation were applied for evaluating the individual mechanical performance of each phase in the alloy. The calculated Young’s modulus (E) suggests that Al 3 Sc (E = 168 GPa), AlSi 2 Sc 2 (E = 178 GPa) and CeAl 2 Si 2 (E = 39.2 GPa) can toughen Al-matrix (E = 30.6 GPa). The rapid cooling (30 K s −1 ) strongly enhances all phase components but diminish the huge hollow AlSi 2 Sc 2 blocks (ultrahigh micro-Vickers hardness ∼ 780 HV), making a homogenous Al-RE alloy with improved mechanical property (68 ∼ 84 HV balanced among phase components). The refining mechanisms on the improved mechanical performance are also discussed.
✓ 已验证
DOI
高影响因子
Green Processing and Synthesis
·
2022
·Vol. 11
·期 1
·184-194
·
IF 3.97
Qiuyun Zhang,Binbin Yang,Yuanyuan Tian,Xianju Yang,Rongfei Yu,Jialu Wang,Taoli Deng,Yutao Zhang
In the present study, a facile solvothermal method was used for the synthesis of silicotungstic acid (HSiW) immobilized on Ce-based metal organic framework (Ce-BDC) and embedded in Zr-based metal-organic framework (UiO-66(Zr)) composite catalyst, namely, Ce-BDC@HSiW@UiO-66 for the production of biodiesel through green fatty acid esterification. The obtained hybrids were characterized by various characterization technologies, including Fourier transform infrared, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N 2 physisorption, X-ray photoelectron spectroscopy, and temperature-programmed desorption of NH 3 (NH 3 -TPD) analysis. The characterization analyses showed that the hybrids have been successfully synthesized. Also, the volume and pore size of UiO-66(Zr) were changed by introducing HSiW@Ce-BDC, and the resulting Ce-BDC@HSiW@UiO-66 possessed the mesoporous structure and relatively high surface area. Simultaneously, the NH 3 -TPD analysis of Ce-BDC@HSiW@UiO-66 reveals that the acid strength was increased in comparison with HSiW@Ce-BDC. In addition, the composite Ce-BDC@HSiW@UiO-66 demonstrated high catalytic activity, and the oleic acid esterification gave 81.5% conversion at optimum conditions of 0.2 g catalysts, 1:30 oleic acid to methanol molar ratio at 130°C for 4 h. More interestingly, after six recycling cycles, the reduction in the conversion rate was only 4.6%, indicating that Ce-BDC@HSiW@UiO-66 has excellent reusability. Our study provides an effective approach to synthesize multifunctional hybrids for green biofuel production.
✓ 已验证
DOI
高影响因子
Journal of Inorganic and Organometallic Polymers and Materials
·
2013
·Vol. 23
·期 6
·1534-1539
·
IF 1.174
Yan Bianling,Zhou Xiaojun,Li Yuanyuan,Yin Fei,Zou Yang,Jiang Yinzhi,Wang Xing,Xie Jingli
A novel 3d–4f heterometallic coordination complex [Ce(H 2 O) 6 (CuL) 2 ]·NO 2 ·7H 2 O ( 1 ) (H 3 L = glycylglycine, N -[1-(2-hydroxy, phenyl)-propylidene]) was synthesized and characterized by IR, elemental analysis, TGA and single crystal X-ray diffraction. An octameric water cluster consisting of a planar tetrameric water ring and four dangling water molecules were observed in 1 . Variable-temperature magnetic data shows antiferromagnetic behavior for 1 .
✓ 已验证
DOI
高影响因子
KOREAN JOURNAL OF CHEMICAL ENGINEERING
·
2017
·Vol. 34
·期 12
·3132-3141
·
IF 2.007
Zhang Wei,Li Xin,Wang Hong,Song Yongji,Zhang Shenghong,Li Cuiqing
Deep desulfurization of model oil by photocatalytic air oxidation and adsorption using Ti (1− x ) M
x
O 2 (M=Zr, Ce) was investigated. Ti (1− x ) M
x
O 2 (M=Zr, Ce) was prepared by urea gelation/co-precipitation method, and characterized by N 2 adsorption, XRD and UV-vis spectra. UV irradiation greatly enhanced the adsorptive capacity and selectivity of TiO 2 -ZrO 2 for organosulfur in model oil because organosulfur compounds were first photocatalytically oxidized to sulfoxides and sulfones over TiO 2 -ZrO 2 , which were then selectively adsorbed on the bifunctional material due to much higher polarities of generated sulfoxides and sulfones. The Ti/Zr molar ratio and calcination temperature were optimized to 5 : 5 and 500 °C with the sulfur removal of 99.6% after reaction for 2 h under UV irradiation. After adding 25 wt% toluene into model oil, the sulfur removal could still reach 97.2% after reaction for 7 h. TiO 2 -ZrO 2 could be well regenrated by washing with acetonitrile followed by thermal treatment in air.
✓ 已验证
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL ENGINEERING
·
2025
·Vol. 151
·期 8
·04025043
·
IF 1.6
Jie Zhang,Mengchen Zong,Ben Dong,Sijie Ge,Shilong He
Quinoline, as one of the typical toxic and refractory organic pollutants in coal chemical industry wastewater, poses a significant threat to human health and environmental quality. In this study, MnCexOy and MnFexOy catalysts were successfully synthesized by doping Ce3+ and Fe2+ into α-MnO2 at a molar ratio of 1∶10 and were applied to the process of catalytic ozonation for the degradation of quinoline. Additionally, a variety of characterization techniques were employed to elucidate the characteristics of the catalysts, including scanning electron microscopy, X-ray diffraction, Brunauer–Emmett–Teller (BET) analysis, X-ray photoelectron spectroscopy, H2-TPR, NH3-TPD. The results show that, in the catalytic ozonation system for quinoline removal, MnCexOy demonstrates excellent quinoline removal efficiency of 87.45%, which is higher than that of MnFexOy (78.83%) and unmodified α-MnO2 (62.67%). By introducing the surface hydroxyl masking agent HPO42−, the significant role of surface hydroxyl groups and oxygen vacancies in the catalytic degradation of quinoline by MnCexOy was further demonstrated. Exploring the surface characteristics of catalysts is beneficial for continued understanding of the active centers of catalysts. Research results will be helpful to the deep treatment and reuse of tailing water of coking wastewater.
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2025
·
IF 3.7
Zhixian Wang,Yuntao Hu,Zhigang Zhang,Bin Wang,Gengxiu Zheng,Huaiqing Zhao
The development of synthetic methods for N-heterocyclic compounds have garnered considerable attention due to their significance in diverse chemical processes. Among various synthesis methods, the direct oxidative dehydrogenation of saturated substances to N-heteroaromatics is a simple and efficient method. This study utilized the pyrolysis of Mn/Ce-BTC MOFs precursor to prepare MnO X -CeO 2 composites as a heterogeneous catalyst for the aerobic oxidative dehydrogenation of N-heterocycles. The MnO X -CeO 2 composites were analyzed with various characterization techniques including XRD, SEM, TEM, BET, XPS, ICP-OES and Raman spectroscopy. The detailed findings from experiments indicate that the catalytic activity of the composites has been significantly improved due to the synergistic effect of MnO X -CeO 2 and the abundant oxygen vacancies on the surface of the catalyst. And the related mechanism experiments reveal that reactive oxygen species (ROS) are involved in this catalytic system. Furthermore, MnO X -CeO 2 composites retain excellent catalytic performance even after ten recycles. Graphical The synthesized bimetallic oxides MnO X -CeO 2 by the pyrolysis of Mn/Ce-BTC MOFs have been employed as a heterogenous catalyst for the oxidative dehydrogenation of N-heterocycles to N-heteroaromatics with oxygen as the solo oxidant.
✓ 已验证
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）