CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Miao Cheng,Junjie Liu,Xiaomian Wang,Yabing Li,Wentao Xia,Qianqian Liu,Jing Hu,Tao Wei,Yun Ling,Bo Liu,Wanfei Li
Rechargeable magnesium-ion batteries (MIBs) are considered to be promising electrochemical energy storage systems because of their low-cost and high safety features. However, the absence of suitable anodes severely impeded the development of high-performance MIBs. Herein, a unique Bi nanospheres homogenously anchored in cellulose nanocrystal (CNC) derived carbon aerogel (CNC-CA@Bi-NS) hybrid, was for the first time fabricated as anode for MIBs through ion-induced gelation and in-situ thermal reduction processes. The successfully incorporation of near-monodisperse Bi nanospheres (4–9 nm diameter) into the interconnected CA matrix could effectively alleviate the volume changes during magnesiation/de-magnesiation alloying reaction, as well as prevent the agglomeration and pulverization of Bi nanospheres. Meanwhile, the N -doped porous matrix not only served as a highly electronic conductive framework but also provided enough space and large surface area for electrolyte storage and penetration, which would facilitate the charge transfer kinetics process. Attractively, the CNC-CA@Bi-NS electrode delivered a remarkable reversible specific capacity of 346 mAh/g at 0.5C (90 % of theoretical capacity) after 100cycles. Furthermore, the CNC-CA@Bi-NS exhibited an excellent rate performance and unprecedented long-term cycling stability with a high coulombic efficiency of ∼ 100 % at 2.0C after 5000cycles. This work provided a new strategy to design and synthesize high-performance Bi-based anode for advanced next-generation MIBs.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 17
·1-12
·
IF 2.8
Liu Yang,Yang Jingdong,Wen Jiaxin,Ye Junliu,Liu Huan,Lu Liwei
Recently, rechargeable magnesium-ion batteries (MIBs) and rechargeable magnesium/lithium hybrid-ion batteries (MLHBs) have gained recognition as promising energy storage devices. However, the conventional CuS cathodes exhibit sluggish kinetics and poor cycle stability, thereby impeding the advancement and application of CuS. In this work, we have developed an economical and simple in-situ approach for synthesizing CuS@Cu foam (CSC) and evaluated its potential as a cathode material for both MIBs and MLHIBs. In both MIBs and MLHIBs, the CSC cathode demonstrates competitive performance. In MIBs, at a current density of 100 mA g −1 , the initial discharge specific capacity of the CSC is 150.94 mAh g −1 , which is higher than that of commercial CuS (3.99 mAh g −1 ). In MLHIBs, the CSC exhibits a discharge specific capacity of 502.95 mAh g −1 after 70 cycles at a current density of 100 mA g −1 , which significantly surpasses the discharge specific capacity of commercial CuS (229.52 mAh g −1 ). This performance improvement is attributed to the presence of Li + ions, which expedite the reaction kinetics, obviate the need for an activation process, and effectively facilitate the conversion reaction. In conclusion, by in-situ synthesis of CSC, the active material CuS firmly adheres to the Cu foam current collector. This approach is not only economical and simple but also significantly enhances the reactivity of the electrode material, thereby improving the electrochemical performance. This work provides valuable insights for the design, synthesis, and performance optimization of cathode materials of magnesium metal-based batteries.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS
·
2022
·Vol. 39
·期 10
·2625-2636
·
IF 2.058
Hang Liu,Xingke Zheng,Pengcheng Wang,Haiyan Wang,Yuhong Zhang
In this work, a comparative study of the upconversion (UC) luminescence properties of ${{\rm Er}^{3 +}} {-} {{\rm Yb}^{3 +}}$-co-doped ${{\rm AWO}_4}$ (${\rm A} = {\rm Ba}$, Sr, and Ca) scheelite phosphors and ${{\rm Er}^{3 +}} {-} {{\rm Yb}^{3 +}} $-co-doped ${{\rm MgWO}_4}$ wolframite phosphors is reported. Under 980 nm excitation, all the samples emit green and red emissions. The ${{\rm Er}^{3 +}} {-} {{\rm Yb}^{3 +}}$-doped ${{\rm MgWO}_4}$ phosphor has a higher UC emission intensity. Furthermore, the optical temperature sensing properties in ${{\rm Er}^{3 +}} {-} {{\rm Yb}^{3 +}}$-co-doped ${{\rm AWO}_4}$ (${\rm A} = {\rm Ba}$, Sr, Ca, and Mg) phosphor samples are investigated. The relative sensitivity (${{\rm S}_r}$) based on thermally coupled levels (TCLs) increases gradually with an increase in matrix phonon energy. The absolute sensitivity (${{\rm S}_a}$) values of the samples are accurately predicted by the chemical bonding parameter (${{\rm f}_c}$). The results of the correlation between the UC luminescence properties and the microscopic crystal structure, and the relationship of the temperature sensitivity and the host parameters, provide us with a guiding insight for the selection of a host material with ideal temperature measurement capability.
✓ 已验证
DOI
高影响因子
Materials Today Chemistry
·
2023
·
IF 7.3
C. Jiang,X. Wang,X. Xiao,M. Piao,Y. Jia,J. He,L. Hu,Y. Zou,L. Sun,L. Chen
Chemical complex borohydride is a promising hydrogen storage material due to its large gravimetric and volumetric hydrogen capacities. However, the high dehydrogenation temperature and sluggish kinetics still place strong restrictions on its practical application in the hydrogen storage field. In this work, a synergetic approach of partial cation substitution and catalysis is developed to enhance the hydrogen storage properties of LiBH 4 . The Li/Mg based dual-cation borohydride (LiMg 2 (BH 4 ) 5 , LMBH) was successfully synthesized by wet chemical ball milling of LiBH 4 and MgCl 2 . The optimal (LMBH (4.5:1) sample, LiBH 4 and MgCl 2 in molar ratios of 4.5:1, possesses a maximum hydrogen desorption capacity (11.27 wt%) and the outstanding initial decomposition temperature (∼250 °C). Importantly, the LMBH (4.5:1) doped with TiF 3 shows a remarkable onset dehydrogenation temperature as low as 97.2 °C, which is about 190 °C lower than that of pristine LiBH 4 . The LMBH (4.5:1) doped with TiF 3 system releases 7.98 wt% H 2 within 170 min below 350 °C. And the dehydrogenation product of doped composite can reversibly absorb ∼4.72 wt% H 2 at a relatively moderate temperature of 280 °C, which is substantially lower than the reversible hydrogen absorption temperature of previous modified borohydride systems. Based on the structural characteristic analyses, the TiF 3 reacts with LMBH (4.5:1) to in-situ form actual catalytic components of TiB 2 and TiH 2 as the actual catalysts for LMBH (4.5:1), resulting in the improved hydrogen re/dehydrogenation properties. The synergetic modification of Li/Mg dual-cation substitution and TiB 2 /TiH 2 catalysis may lead to the development of light-metal borohydrides with outstanding hydrogen storage properties.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2016
·
IF 3.15
Fubao Gong,Jun Shen,Runhua Gao,Xiong Xie,Xiong Luo
A novel organic–inorganic Mg(OH) 2 /silane surface layer has been developed for corrosion protection of AZ31 magnesium alloy. The results of electrochemical impedance spectroscopy (EIS), the immersion tests, Fourier-transform infrared spectroscopy (FTIR) and sellotape tests showed that the Mg(OH) 2 /silane-based composite surface layer possessed excellent corrosion resistance and very good adhesion due to the formation of Si–O–Mg bond between Mg(OH) 2 layer and silane layer. Electrochemical impedance spectroscopy tests results indicated that for the long-term corrosion protection of AZ31 the increase of the curing temperature improved the impedance of the composited layer when the curing temperature was lower than 130 °С. However, the impedance of the composited layer deceased when the curing temperature was more than 130 °С due to the carbonization of the silane layer.
✓ 已验证
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2020
·
IF 7.888
Jiehua Bao,Yuming Zhou,Yiwei Zhang,Yanyun Wang,Shuang Liang,Zhiwu Guo,Chang Guo,Yi Xue,Tao Zhuang,Yingjie Hu
In this study, we synthesized a series of Ni-based catalysts with different CeO 2 contents (0, 1, 2, 5 and 10 wt%) anchoring on the Al-Mg oxide spheres (AMO) with three-dimensional hollow flower-like structure. The triethoxyoctylsilane (TEOOS) and polyvinylpyrrolidone (PVP) were selected as effective modified reagents to introduce hydrophobic functionality on the surface of AMO and Ni-CeO 2 nanoparticles, respectively, for controllable anchoring Ni-CeO 2 nanoparticles on AMO by hydrophobic interaction driving mechanism. The effects of CeO 2 content on the texture, dispersion of Ni species, the reducibility of Ni 2+ , surface electronic states and acidity were investigated in detail. The Ni-5CeO 2 /AMO was found to achieve the highest 2,2′-bipyridine selectivity of 90.6% and maximum turnover number (TON) of 8611, specifically. Moreover, the Ni-5CeO 2 /AMO exhibits superior stability, maintaining 89% of 2,2′-bipyridine yield after 6 runs, due to the mitigated nickel leaching and promotion of the desorption of 2,2′-bipyridine. Furthermore, with the help of DFT calculations, a possible reaction mechanism was discussed and illustrated.
✓ 已验证
DOI
高影响因子
NANOTECHNOLOGY
·
2025
·Vol. 36
·期 19
·195602
·
IF 2.8
Qing Sun,Jiao Yan,Jiale Yu,Xiaofang Hu,Jian Zhang,Jiawei Sheng
In this study, the core-shell nanostructure of magnesium reinforced cobalt silicate@13X was synthesized by a two-step reaction using zeolite 13X as the initial silicate material and carrier, and the organic pollutant metronidazole was degraded by activating PMS. It was found that 6CoMg-13X had excellent and stable catalytic performance on PMS activation, with a degradation rate of 99.7% in 5 min and a removal rate of more than 99.4% after 5 cycles. Under hydrothermal conditions, 13X gradually dissolved into silicate anion under the action of urea, while Co2+ and Mg2+ reacted on 13X surface to form ultra-thin core-shell nanostructures. The calcination process further improves the stability of the catalyst while reducing cobalt leaching, after calcination, cobalt leaching is only 0.16 mg l−1. In addition, the catalyst had high degradation rates for norfloxacin (NFA), 5-fluorouracil (FLU), tetracycline (TC) and Rhodamine B (RhB), which were 90.29%, 97.36%, 96.24% and 99.69%, respectively. EPR and quenching experiments indicated that SO4‧− and 1O2 are the main active substances in the 6CoMg-13X-PMS system, and ‧OH and ‧O2− also play a certain role in the degradation system. This research provides a feasible solution for developing high performance cobalt-based environmental purification catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Storage
·
2025
·
IF 9.8
Cheng Liu,Yi Zhang,Pengrui Zhang,Yigang Ding,Jinhe Sun
A multitude of composite phase change materials (PCM) systems have been developed, resulting in significant advancements in the efficiency of solar thermal storage systems. However, there is a paucity of inorganic-organic composite PCMs systems, and the phase change mechanism remains unclear, which significantly constrains the deployment and advancement of this category of PCMs. To address this gap in the literature, this team has developed a novel organic-inorganic composite PCM system using 30 wt% Mg(NO 3 ) 2 ·6H 2 O (MNH) and 70 wt% propanamide (POA) as raw materials. The thermal physical properties of the PCMs were initially analyzed, and the results demonstrated that the PCMs exhibited favourable latent heat and thermal cycling stability. The melting point was found to be 376.2 K, with a latent heat of melting of 131.93 J·g −1 . It was observed that the melting temperature and latent heat remained essentially unaltered after 500 cycles. Subsequently, the structure of the PCMs was analyzed using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Ultimately, the interaction between liquid MNH and POA was modeled using molecular dynamics, allowing for a deeper understanding of the phase transition mechanism. It is hypothesized that the hydrogen bonds (HBs) between the two substances affects the physical bond, and that HBs contribute to the PCMs having good stability and a high thermal decomposition temperature. The rational mechanism of this phenomenon is explained from many aspects, including structure, Hirshfeld surface and thermal analysis. It is anticipated that the discovery of this new PCMs will facilitate large-scale applications in solar energy storage.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2025
·Vol. 17
·期 35
·20465-20475
·
IF 5.1
Weiyi Li,Min Zhang,Shen Cai,Yan Xin,Huajun Tian
Alluaudite-type Na2+2xFe2−x(SO4)3 has been a promising cathode material for sodium-ion batteries (SIBs) due to its high operating voltage and stable structure. However, its actual electrochemical performance suffers from intrinsic sluggish kinetics and poor electronic conductivity. In this work, for the first time, we propose a Na2.48(Fe0.89Mg0.03Sn0.04)1.76(SO4)3 cathode material prepared via a Mg/Sn co-doping strategy. Inactive Mg2+ stabilizes the structure, while Sn4+ inhibits the decomposition of electrolytes under high voltage. The Mg/Sn co-doping strategy enhances the kinetics of sodium ion diffusion reactions, leading to improved electrochemical properties, especially at low temperatures. The optimal NFMS/C-Sn0.03 cathode exhibits a long-term capacity retention of 91.6% after 1500 cycles at 5C and outstanding reversible capacities of 74.3 and 58.3 mAh g−1 at 10C and even at 50C, respectively. Furthermore, the NFMS/C-Sn0.03 cathode demonstrates a high capacity retention of 95.5% at −5 °C and 88.4% at −15 °C, with a remarkable capacity retention of 93.9% after 1000 cycles at room temperature and 85.5% after 700 cycles at −15 °C, respectively. Electron paramagnetic resonance (EPR) and atomic force microscopy (AFM) techniques confirmed that the presence of unpaired electrons and enhanced electronic conductivity could be attributed to the Mg/Sn co-doping. This work provides a feasible approach for designing low-cost, durable, low-temperature, and high-performance cathode materials for SIBs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL POLLUTION
·
2024
·
IF 7.6
Wanyu Zhang,Jian Liang,Sufeng Wang,Mingyang Lin,Jingshan Li,Li Chen,Yingchao Zhang,Tifeng Jiao
This study reported a new strategy for enhanced Pb 2+ and Cu 2+ sequestration by Artemia cyst shell (shell) supported nano-Mg from aqueous solutions and the carbonated exhausted-adsorbents sequenced potential application in photo-catalyst, which obtained two expected results. One is that the immobilization of nano-Mg onto Artemia cyst shell (shell-Mg) can greatly strengthen the adsorption effect of the neat cyst shell on Pb 2+ and Cu 2+ . The adsorption capacities of shell-Mg for both metal ions reached to 622.01 and 313.91 mg/g, which was 10–15 and 30–50 times that of the neat shell respectively. And shell-Mg has strong selectivity , which was approximately 2–4 times that of shell. The shell-Mg can be used to retrieve Pb 2+ and Cu 2+ from aqueous solutions efficiently. Another is that the carbonated exhausted-adsorbents (C-shell-Mg-Pb and C-shell-Mg-Cu) showed their potential photocatalytic degradation effects on congo red under pH = 4 condition, the decolorization rate reached to 61.19% and 80.39% respectively. Reuse of exhausted adsorbents can avoid the secondary pollution caused by the regeneration, extend the utilization value of exhausted adsorbents, and provide a new viewpoint for the reuse of spent bio-nanomaterial adsorbents.
✓ 已验证
DOI
PubMed
高影响因子
GREEN CHEMISTRY
·
2022
·Vol. 24
·期 22
·8840-8852
·
IF 11.034
Zongyang Liu,Yuan Tan,Jie Li,Xiuli Li,Yan Xiao,Juan Su,Xingkun Chen,Botao Qiao,Yunjie Ding
Aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is a promising alternative route to produce renewable biodegradable plastics, which has stimulated intense interest in recent years. Supported gold catalysts have shown great potential for this reaction, but the selectivity and stability need to be improved. In addition, the requirement for base additives makes the process less effective and sustainable. Herein, highly active and selective Au–Ag bimetallic nanoclusters supported on MgAl-hydrotalcite (HT) were developed for HMF oxidation to FDCA under base-free reaction conditions using molecular oxygen as the oxidant. The presence of small amounts of Ag (0.034–0.065 wt%) in Au25 clusters greatly enhanced the catalytic reaction rates and selectivity for HMF tandem oxidative steps, leading to both high conversion of HMF (>97%) and high yield of FDCA (>95%). Besides, the catalyst stability was also enhanced by the addition of Ag. The characterization results suggested that the substitution of Ag atoms modified the electronic structure of Au while likely maintaining the primary geometry. Thus, a significant synergistic effect could be observed over trace Ag modified Au–Ag bimetallic nanoclusters. The present work provides new insight into the alloying effect, and helps understand highly efficient Au-based catalysts for aerobic oxidation of biomass derived molecules under base-free conditions.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Zhiqiang Guo,Xinmiao Wu,Juanjuan Meng,Xinxin Li,Yuan Li,Liangliang Hu
MIL-101(Fe) has received more and more attention in wastewater treatment, and how to further improve its stability and sorption capacity has become a research focus. In this study, metal Mg was used to dope MIL-101(Fe) to construct Mg@MIL-101(Fe) with bimetallic sites, which was then mixed with NH 2 -MIL-125(Ti) to successfully fabricate Mg@MIL-101(Fe)/NH 2 -MIL-125(Ti) (MOM) bis-MIL composites. MOM not only contains a large number of sorption sites but also exhibits excellent stability and reusability, realizing efficient sorption of Pb(II) from aqueous solution. In addition, the sorption performance and mechanism of Pb(II) on MOM were investigated by the characterizations of SEM, BET, TG, XRD, FTIR and XPS, as well as the kinetic and thermodynamic analyses. The sorption of Pb(II) on MOM is in accordance with the Langmuir isothermal model and pseudo-second-order kinetic model. The maximum sorption capacity of Pb(II) on MOM derived from the Langmuir model fitting is 320.941 mg·g −1 . The sorption of Pb(II) on MOM is strongly affected by pH, but not by ionic strength, which indicates that MOM has good resistance to salt interferences. The strong complexation of carboxyl, hydroxyl and amino functional groups with Pb(II) is the main sorption mechanism of Pb(II) on MOM, and electrostatic interaction and ion exchange also contribute to the sorption. In conclusion, MOM has strong practical application prospects in the treatment of Pb(II)-containing wastewater.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）