文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第913至924个,产品总数13,410个

切换升序
酒精
WATER RESEARCH · 2025 · IF 12.4

Alcohols as Reactive Species Modulators: Rethinking Quenching in UV/Chlorine Process

Boqiang Li,Longjie Cheng,Lei Wang,Baiyang Chen

Alcohols are widely used as quenchers in UV/chlorine process currently to evaluate the roles of radicals, principally relying on the premise that they selectively react with target radicals (e.g., HO ● and Cl ● ) without affecting other reactions. However, this study revealed several unrecognized alcohol-dependent phenomena in this system that clearly challenge this principle. Specifically, tert-butanol inhibited chlorine decay ( k obs  = 0.14 min –1 ), whereas methanol, ethanol, and iso-butanol accelerated it by 1.2-2.3 folds ( k obs  = 0.23-0.45 min –1 ). Mechanistic analysis indicated that alcohols quenched HO ● and Cl ● while simultaneously generating secondary species that altered chlorine consumption. In the case of tert-butanol, radical quenching dominated and suppressed indirect chlorine decay, so that tert-butanol actually inhibited the conversion of chlorine. In contrast, other monohydric alcohols formed HO-R ● that reacted with O 2 to O 2 ●− , a stronger driver of chlorine loss. A quantitative structure-activity relationship model (R 2  = 0.949) identified molecular polarizability (α = 13.8-42.9) and the lowest unoccupied molecular orbital energy ( E LUMO  = 2.41-2.60 eV) of alcohols as predictive descriptors of chlorine decay. For representative micropollutants, using methanol as quencher inflated the apparent roles of primary radicals (up to 83.6%) but underestimated secondary species such as ClO ● , whereas tert-butanol provided more reliable qualitative indication. To assess radicals reliably, we propose a two-step strategy that avoids misattribution: (1) using tert-butanol for qualitative indication of radical involvement; (2) applying multi-probe competition kinetics and modeling radicals adduct speciation for radical quantification. This work established quantitative bounds on alcohol-induced perturbations and offers a protocol for reliable radical quantification in advanced oxidation research.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2025 · IF 7.2

Investigation of adsorption-electrochemical degradation properties of Cu-doped ZIF-8/MWCNTs/CC anode materials against emerging organochlorine contaminants in wastewater

Xinyue Liang,Weihong Zhang,Xiaolong Yao,Zhengyang Feng,Qingwei Bu,Wenwen Gong,Wei Wang,Chun Wang,Yingxue Sun

Adsorption-electrocatalytic oxidation is a promising technology for organochlorine removal; however, its practical application is hindered by electrode limitations in activity, stability, and mechanistic understanding. In this study, a copper-doped ZIF-8/multi-walled carbon nanotube composite electrode (Cu-ZIF-8/MWCNTs/CC) was innovatively designed. Adsorption-electrochemical batch experiments were conducted to systematically investigate the degradation behaviors of three typical organochlorine contaminants: 2,4-dichlorophenol (2,4-DCP), triclosan (TCS), and chloramphenicol (CAP), using MOF-based electrodes. The results demonstrate that compared to the undoped ZIF-8/MWCNTs/CC, the incorporation of Cu introduced additional mesoporous structures and Cu-N coordination bonds, which effectively enhanced adsorption performance based on the size-matching effect and d-band center theory. Furthermore, the highly reversible and kinetically rapid Cu 2 + /Cu + redox couple served as an efficient mediator for charge transfer, thus promoting the synergistic adsorption and electrochemical degradation of organochlorine contaminants. Notably, the material maintained considerable removal efficiency even under competitive conditions in multicomponent systems. Mechanistic investigation demonstrated that hydroxyl radicals (·OH) preferentially attacked critical chemical bonds (including C-Cl, ether, and amino groups) in accordance with density functional theory (DFT) predictions. This reaction pathway resulted in the generation of less toxic intermediates that were eventually mineralized into CO 2 and H 2 O. The ecological structure-activity relationships (ECOSAR) model further confirmed the low acute and chronic toxicity of the major degradation products. Moreover, the electrode maintained high removal efficiency across multiple consecutive cycles, demonstrating excellent stability and reusability. Collectively, this work proposes a novel strategy for the synergistic adsorption and electrocatalytic removal of organochlorine contaminants; thereby highlighting its significant potential for practical application.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
POLYMER · 2025 · IF 4.5

Network tightening inspired strong, tough and recyclable polyimine composites via core-shell polymer reinforcement

Haiyue Wang,Ping Yu,Changyi You,Wei Hong,Yang Xu,Zhanzhan Tian,Hongying Qiu,Hongfei He,Wei Li,Ting Li,Bin Yu

Dynamic polyimine is emerging as a promising alternative for next-generation plastics due to its unique properties of degradability and recyclability, addressing the growing issue of plastic pollution. However, the dynamic bond exchange in polyimine results in drawbacks such as insufficient mechanical performance and less environmental resistance. Thus, enhancing stability and mechanical properties without sacrificing dynamic performance remains a critical challenge. To address this issue, our work utilizes core-shell polymer (CSP) as a reinforcement to improve the stability and mechanical toughness of polyimine. By adjusting the ratio of CSP, a series of fluorene-based polyimine networks (Cardo-DPI/CSPs) were obtained. Compared to pure polyimine films (Cardo-DPI), Cardo-DPI/CSPs exhibit not only increased toughness (5.2 vs 3.3 MJ/m 3 ) but also significantly increased glass transition temperature (106 vs 81 °C), inducing by “network tightening” as indicated by the crosslinking density and activation energy. Furthermore, Cardo-DPI/CSPs demonstrate better hydrophobicity and acid resistance than Cardo-DPI. Furthermore, dynamic properties of polyimines were not compromised by the incorporation of CSP. Cardo-DPI/CSPs can be rapidly degraded and recycled at room temperature, while maintaining high tensile properties during thermal pressing and after recovering from free amine degradation. Our work not only contributes to a deep understanding of this network, but also offers strategies for optimizing the properties of dynamic network, which are anticipated to broaden the application scope of dynamic polymers.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Synergistically enhanced co-adsorption of OH− and HMF on Cu-modified Ni aerogel for biomass upgrading coupled with hydrogen production

Jiahui Liu,Hongchen Liu,Fan Yang,Junpu An,Siyuan Sun,Yang Sun,Kexin Wei,Xinyang Sun,Junwei Yuan,Meitong Zhao,Haojia Zhong,Kuobo Wang,Jintian Ren,Zhenxing Li,Yongfen Li

The electrochemical oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising pathway to synthesize the critical polymer monomer 2,5-furandicarboxylic acid (FDCA). However, the restricted adsorption of both HMF and OH − to the catalyst surface results in low activity and selectivity. To address this issue, this study introduced an electrochemically assisted strategy to synthesize Ni aerogel with Cu heteroatom doping (Ni 0.94 Cu 0.06 /NF), demonstrating excellent performance for HMF to FDCA conversion in alkaline media. The catalyst achieves 10 mA cm −2 at 1.307 V vs. RHE, with outstanding Hydrogen evolution reaction (HER) activity (10 mA cm −2 @11 mV). Notably, the conversion rate of HMF, the selectivity of FDCA and the Faraday efficiency can reach 99.5 %, 99 % and 97 %, respectively. Scanning Electron Microscope (SEM) and transmission electron microscopy (TEM) demonstrated that the aerogel's self-supported 3D framework with interwoven nanowire structure enables efficient exposure of catalytic sites. X-ray photoelectron spectroscopy (XPS) analysis further showed the modification with Cu forms unique Ni O Cu linkage within the catalyst's surface region, which effectively adjusts the electronic configuration of Ni sites and increases lattice oxygen content, thereby enhancing HMF adsorption. Density functional theory (DFT) revealed that the synergistic interplay between Ni and Cu markedly boosts the uptake capacity for both HMF and OH − , improves the rate-determining step (RDS) thermodynamics by reducing its barrier, and consequently accelerates the HMF oxidation reaction (HMFOR). Our findings elucidate fresh perspectives into the structure-performance relationship of nickel-based catalysts and offer a novel approach for designing advanced electrocatalysts for biomass upgrading.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Supermolecule-engineered nanogap hotspots: Ultra-selective and sensitive SERS detection and intracellular imaging

Yuanjie Teng,Pei Xu,Zihang Zhou,Ning Xu,Jiayi Qiu,Yi Zhong,Jie Li,Haimin Shen,Zaifa Pan,Tianyu Hu,Xingchen Zhang,Yantao Lou

The selective detection of weakly adsorbing, low-abundance molecules in complex biological environments remains a fundamental limitation of conventional surface-enhanced Raman scattering (SERS) technology. Here, we engineered a macrocyclic supramolecular pillararene-bridged gold nanoparticle assembly to create sub-nanometer plasmonic gaps with intense electromagnetic hotspots, enabling ultrasensitive molecule detection in complex matrix. The pillararene-functionalized interface not only enhanced SERS signals (with enhancement factor of 1.3 × 10 7 for curcumin, a model phenolic drug), but also provided selective recognition of phenolic biomarkers through host–guest chemistry, effectively suppressing background noise in water, cell lysate and serum environments. Combined with single-molecule counting, the detection limit reached to 1.03 × 10 −12  mol/L for curcumin. Cellular imaging experiments demonstrated that the pillararene linker facilitated intracellular delivery of curcumin while simultaneously amplifying its Raman signal, enabling real-time tracking of drug distribution at subcellular resolution. This work establishes a versatile detecting platform that integrates supramolecular targeting with plasmonic enhancement, advancing spatially resolved detection of low-abundance molecules in complex biological environments for precision diagnostics and therapeutic evaluation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY · 2025 · IF 4.7

The Mars–van Krevelen cycle and fine-customized d-band centers promoting S-scheme heterojunction charge transfer on wide solar-spectrum photocatalytic water purification

Zhiqiang Yu,Yufan Lan,Tenghui Li,Shucheng Huang,Wuli Han,Xiao Luo

This study constructed an S-scheme MIL( Fe )DCA (et al., 2023b (6)) /MoS 2 heterojunction for enhanced performance in degrading pollutants under a wide spectrum, benefiting from the customized d-band centers (by the built-in electric field) and the Mars–Van Krevelen cycle. Results reveal the tetracycline degradation rate of MIL( Fe )DCA (et al., 2023b (6)) /MoS₂ (~95 %) increases 1.38-fold and 11.8-fold compared to pristine MIL-Fe-DCA and MoS 2 , respectively, with better repeatability.Also, satisfactory reduction of Cr(VI) ions (75 %) and removal of coumarin (81.3 %) and ciprofloxacin hydrochloride (83 %) are observed. The catalyst exhibits rich defects, wide-spectrum solar light harvesting, efficient separation of h +  ~ e − pairs and a robust redox process. It is found that the charge transfer in the S-scheme interfacial electric field elevates the d-band center towards the Fermi level, which can effectively lower water activation energy to more easily produce •OH, enhancing intermediate adsorption on the catalyst's surface, thus facilitating charge transfer and accelerating reaction kinetics. Another major emphasis is the oxygen defects induced Mars–Van Krevelen cycle, wherein adsorbed reactants, lattice oxygen, h + , •O 2 − , Fe 2+ and Fe 3+ participate in the reaction processes, which contributes to the photo-thermal conversion, achieving the synergy between photocatalysis and photothermal catalysis. This work offers a synergetic strategy involving the interfacial electric field, d-band center, and photo-thermal effect for photocatalytic water purification.

CAS / MDL: 64-17-5 7697-37-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
OPTICS EXPRESS · 2025 ·Vol. 33 ·期 21 ·45462-45473 · IF 3.3

Enhanced magneto-optical sensitivity in CsPbBr3 perovskites via Cr3+ ions doping

Liangjie Li,Liangjie Li,Liangjie Li,Qilin Wei,Ye Tian,Ye Tian,Ye Tian,Huan Fei Wen,Huan Fei Wen,Huan Fei Wen,Huizhen Yao,Le Zhang,Le Zhang,Zhenrong Zhang,Mengwei Li,Jun Tang,Jun Tang,Jun Tang,Jun Tang,Jun Liu,Jun Liu,Jun Liu,Jun Liu

The magneto-optical effect provides a means of optical manipulation for materials and plays a significant role in optical signal modulation. However, the regulation of magneto-optical anisotropy remains challenging. This study reports the impact of Cr3+ doping on the optical anisotropy of CsPbBr3 perovskite under a magnetic field. Experimental observations revealed that Cr3+ doping successfully induced dual emission peaks corresponding to the antiferromagnetic polaron (AMP) and the exciton magnetic polaron (EMP), resulting in a blue shift in the photoluminescence (PL) spectrum. Polarization-resolved PL measurements demonstrated that Cr3+ doping significantly enhanced the magnetic field sensitivity of CsPbBr3. The optical anisotropy progressively transitioned towards isotropy with increasing magnetic field strength, with the AMP exhibiting stronger magnetic field sensitivity than the EMP. Furthermore, density functional theory (DFT) calculations indicated that Cr3+ doping substantially modified the electronic band structure of the material. These findings provide a viable strategy for tuning the magneto-optical anisotropy of lead halide perovskites, demonstrating significant potential in applications such as magneto-optical modulators and quantum sensing devices.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2025 · IF 8.5

Cream-colored lignin nanoflowers via ethanol/water fractionation: Sustainable UV-blocking additives for sunscreen

Jiawei Zhang,Kang Sun,Gaoyue Zhang,Xinchen Lu,Jian Zhao,Ruizhen Wang,Haihong Xia,Kui Wang,Kaili Zhang,Jianchun Jiang

Lignin possesses intrinsic ultraviolet (UV) shielding properties, making it one of the most promising natural materials for eco-friendly sunscreen development. However, the wide molecular weight distribution, complex structure, dark color, and poor dispersibility of industrial sulfonated lignin (LS) have hindered its commercial application in cosmetic formulations. In this study, a green and efficient antisolvent approach using ethanol was developed to simultaneously fractionate LS and fabricate lignin nanoflowers (LSNFs). The results revealed that the low-molecular-weight fraction, LSNF 3 , exhibited a high density of oxygen-containing functional groups (phenolic hydroxyl content = 2.12 mmol/g), superior antioxidant activity (RSI = 6.45), and a significantly lighter appearance—with brightness and whiteness values increased by 253.5 % and 286.2 %, respectively, compared to LS. Molecular dynamics simulations further elucidated the self-assembly mechanism of nanoflower formation. Finally, LSNFs were incorporated into cream and SPF15 sunscreen formulations. The SPF value of 10 % LSNF 3 /Sunscreen reached as high as 67.8, demonstrating a green and cost-effective pathway for the application of lignin in the field of sun protection.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
International Journal of Genomics · 2025 · IF 1.9

Exploration of the Mechanism of Tongmai Xianxiang in Treating Postherpetic Neuralgia Based on Gas Chromatography–Mass Spectrometry Analysis and Network Pharmacology

Linglong Qu,Hui Wang,Yufeng Huang,Zhen Gao,Ruichang Song,Shiyu Sun,Pingping Shao,Rukai Wang,Chunlin Li

Objective The aim of this study is to explore the potential target of Tongmai Xianxiang in the prevention and treatment of postherpetic neuralgia (PHN) by gas chromatography–mass spectrometry (GC‐MS) and network pharmacology. Methods Quantitative analysis using GC‐MS was employed to obtain the chemical components of Tongmai Xianxiang, and target site prediction was conducted; PHN‐related targets were collected from relevant disease databases; the anti‐PHN targets of Tongmai Xianxiang were obtained through network pharmacology methods, and molecular docking was performed on the main targets. Results A total of 633 active components were screened by GC‐MS, corresponding to 772 targets. By searching the disease database, a total of 169 PHN‐related disease targets were obtained after removing duplicates. A total of 53 core genes, including SLC6A4, MAOA, DRD2, and ALB, were obtained by intersecting the corresponding target and PHN target. Through molecular docking, the results indicate that ALB has the lowest free binding energy with Z‐butylidenephthalide, 2‐undecanol, and 1,6,10‐dodecatrien‐3‐OL, 3,7,11‐trimethyl‐, (E)‐. Conclusion Tongmai Xianxiang can prevent PHN by multitarget, multiprocess, and multipathway. This study provides new ideas and new targets for the intervention of Tongmai Xianxiang in PHN.

CAS / MDL: 64-17-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2025 · IF 6.3

Fast in situ construction of a Cu2O/Cu-MOF S-scheme heterojunction with synergetic interface matching and carrier separation ability for efficient photocatalytic nitrogen fixation

Yanning Qu,Wanquan Ma,Shihu Lei,Yuan Yu,Dongfeng Sun,Huayun Du,Madi Ren

Metal-organic frameworks (MOFs)-based heterojunctions, as one of porous materials, offer abundant unsaturated coordination sites, making them suitable for photocatalytic N 2 reduction. However, complicated reaction methods, mismatched interfaces and ineffective photo-induced carrier separation restricted their applications. In this study, a kind of Cu 2 O/Cu-MOF heterojunction was synthesized via a fast in situ method in acidic medium (CCM-a). It showed a typical core-shell structure with Cu-MOF coating surrounding the Cu 2 O. The photocatalytic NH 3 yield of CCM-a reached 83.25 μmol/g/h, which was 9.03 and 19.64 higher than that of pure Cu 2 O and CCM-b, respectively. The reaction pathway of N 2 reduction was investigated using density functional theory (DFT) and in-situ FT-IR spectra, revealing a preference for the alternating association pathway. The photocatalytic mechanisms were analyzed through the built-in electric field (IEF) theory, supporting its S-scheme charge-transfer route of CCM-a. The novel material achieved from in situ strategy not only ensured a good interface matching ability but also facilitated sufficient separation of photo-generated carriers via a S-scheme route for efficient photocatalytic N 2 fixation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS · 2025 ·Vol. 25 ·期 20 ·6429 · IF 3.5

Total Solution-Processed Zr: HfO2 Flexible Memristor with Tactile Sensitivity: From Material Synthesis to Application in Wearable Electronics

Luqi Yao,Yunfang Jia

In the pursuit of advanced non-volatile memory technologies, ferroelectric memristors have attracted great attention. However, traditional perovskite ferroelectric materials are hampered by environmental pollution, limited applicability, and the complexity and high cost of conventional vacuum deposition methods. This has spurred the exploration of alternative materials and fabrication strategies. Herein, a flexible Pt/Zr: HfO2(HZO)/graphene oxide (GO)/mica memristor is successfully fabricated using the total solution-processed method. The interfacial oxygen competition mechanism between the HZO layer and the GO bottom electrode facilitates the formation of the HZO ferroelectric phase. The as-prepared device exhibits a switching ratio of approximately 150 and can maintain eight distinct resistance levels, and it can also effectively simulate neural responses. By integrating the ferroelectric polarization principle and the piezoelectric effect of HZO, along with the influence of GO, the performance variations of the as-prepared device under mechanical and thermal influences are further explored. Notably, Morse code recognition is achieved by utilizing the device’s pressure properties and setting specific press rules. The as-prepared device can accurately convert and store information, opening new avenues for non-volatile memory applications in silent communication and promoting the development of wearable electronics.

CAS / MDL: 64-17-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY · 2025 · IF 14.3

Multifunctional Janus composite films with spontaneous gravity-induced asymmetric gradient for absorption-dominated electromagnetic interference shielding and high-efficiency thermal management

Mengxin Liu,Haoran Zhang,Xinmeng Huang,Ziyi Zhang,Shulin Huang,Qihui Wen,Jintang Zhou,Lei Pan

With the rapid advancement of high-power electronics, developing advanced multifunctional electromagnetic interference (EMI) shielding materials that simultaneously realize high shielding effectiveness (SE), low reflection, and mechanical adaptability remains a critical challenge. This work presents a gravity-driven assembly strategy to construct asymmetric gradient structures by spatially distributing low-density MXene nanosheets@hollow Fe 3 O 4 nanospheres (MXene@HFO) and high-density silver-coated tetraneedle ZnO whiskers (T-ZnO@Ag) within a waterborne polyurethane (WPU) matrix. The self-organized Janus architecture optimizes impedance matching and enables a multiple “absorption-reflection-reabsorption” loss mechanism. The resulting composite film achieves absorption-dominated EMI shielding with an SE of 72.4 dB and an absorption coefficient ( A ) of 0.54. Notably, it also exhibits exceptional mechanical properties, including over 400% reversible stretchability, robust durability for 1000 cycles, and strain-responsive shielding tunability, addressing key limitations in practical applications. Moreover, the interconnected conductive network delivers rapid Joule heating (174°C in 30 s at 2.5 V) and high thermal conductivity (9.53 W m −1 K −1 ), enabling efficient thermal management. The proposed multifunctional film holds great promise for next-generation electronics requiring simultaneous EMI protection and thermal management, while the one-step fabrication methodology offers scalability advantages suitable for industrial production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。