JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2025
·Vol. 36
·期 29
·1-12
·
IF 2.8
Nurbolat Kuanysh,Wu Zhengwei
A nitrogen plasma-assisted surface engineering strategy was developed to functionalize carbon cloth (CC) and enhance the growth and distribution of Bi₂O₃ nanoparticles for supercapacitor applications. The plasma treatment introduced abundant nitrogen-containing functional groups and defect sites on the CC surface, which promoted uniform nucleation during the subsequent precipitation–calcination process. The resulting Bi₂O₃@NCC composite exhibited a high areal capacitance of 2788.7 mF cm⁻ 2 at 1 mA cm⁻ 2 and retained 64.2% of this value at 20 mA cm⁻ 2 . The electrode also demonstrated good cycling stability, with 80.1% capacitance retention after 5000 charge–discharge cycles. Electrochemical impedance spectroscopy (EIS) confirmed reduced charge transfer resistance and enhanced ion diffusion kinetics. This work demonstrates a practical and scalable plasma-assisted approach for improving both the performance and durability of carbon-based composite electrodes for energy storage applications.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Hang-Jie Cai,Ming-Yuan Gao,Meng-Wei Guo,Rong-Rong Deng,Yan Li,Juan-Jian Ru,Yi-Xin Hua,Qi-Bo Zhang,Cun-Ying Xu
Zn alloy engineering has emerged as a promising anodic strategy for aqueous Zn-ion batteries (AZIBs), effectively suppressing side reactions and dendritic growth. However, the impact of multiphase alloy compositions on zinc deposition and overall battery stability remains insufficiently understood. In this study, a versatile deep eutectic solvent (DES) was employed as both the electrolyte and the reaction medium for multiphase alloy formation. Hierarchically porous Cu-Zn multiphase alloys were fabricated on a three-dimensional (3D) Cu foam substrate (Cu-Zn/CF) via electrochemical deposition, with precise control over alloy composition achieved by adjusting deposition parameters. The synergistic interactions among Cu-Zn alloying elements significantly enhance the hydrogen evolution overpotential, reduce corrosion current, and effectively suppress Zn dendrite formation during repeated cycling. Furthermore, the combination of Cu-Zn alloys with the 3D Cu foam architecture facilitates highly reversible zinc plating and stripping processes. Consequently, the Cu-Zn/CF anode demonstrates exceptional cycling stability, maintaining performance for over 4000 h at 0.5 mA·cm −2 (0.5 mAh·cm −2 ). Notably, the anode retains excellent cycling stability with minimal polarization and an average Coulombic efficiency of 99% even under rigorous operating conditions. This work not only clarifies the functional roles of alloying components but also presents a novel strategy for the development of stable, dendrite-free zinc metal anodes.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Materials and Technologies
·
2025
·
IF 9.2
Xianjin Qi,Guizhi Yan,Boyu Du,Mengmeng Wang,Yongkui Li
Arsenic (As) contamination is a global problem that requires innovative remediation, this study successfully synthesized a novel MnFe 2 O 4 -Zn/Co ZIFs@MIL-53(Fe) (MFZM) using a solvent method to remove As(V) from contaminated water. The MFZM exhibited a rhomboidal dodecahedron structure with a high specific surface area of 158.93 m 2 /g, which contributed to its exceptional adsorption performance under both acidic and neutral pH conditions. Notably, the adsorption capacity for As(V) reached approximately 599.90 mg/g at an equilibrium concentration of 500 mg/L, surpassing the performance of several previously reported adsorbents. The kinetic modelling results indicated that the adsorption process followed a pseudo-second-order mechanism, suggesting chemisorption as the dominant process. However, the isotherm studies demonstrate favorable single-layer adsorption, with the Langmuir model providing the best fit for the experimental data. The X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis revealed that the Fe/Mn/Co on the MFZM surface can hydrolyze and generate Fe/Mn/Co-OH groups under pH conditions ranging from 3 to 7, facilitating the formation of stable coordination complexes with As(V). Furthermore, the MFZM provided abundant positively charged adsorption sites that effectively attracted HAsO 4 2− via electrostatic interactions, leading to efficient As(V) removal. These findings underscore the potential of the MFZM as a promising adsorbent for the effective remediation of As-contaminated wastewater, supporting sustainable environmental management.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2025
·
IF 9.8
Changhai Zhang,Zhiqi Zhou,Xue Zhang,Xu Tong,Chao Wang,Tiandong Zhang,Wenju Wu,Qingguo Chi
High-temperature applications demand polymer dielectrics with a high glass transition temperature ( T g ), wide bandgap, and high dielectric constant for superior energy storage performance. However, inherent trade-offs among these key parameters in existing polymers lead to soaring leakage currents and increased energy losses at elevated temperatures, severely limiting further performance enhancement. To address this issue, this paper uses polyisopren-imide (PNI) as the matrix material, attempting to decouple the T g , bandgap, and dielectric constant using fluorination modification and the creation of physical-chemical double-crosslinked networks. First, electron-withdrawing fluorine atoms were incorporated into PNI to form FPNI 50 , enhancing the polymer's bandgap and thereby inhibiting charge excitation and reducing leakage current. Subsequently, dicyclopentadiene (DCPD) was employed as a chemical crosslinking agent to construct a covalent-bonded crosslinked network (FPNI 50 D 5 ) which effectively restricted molecular chain mobility and reduced dielectric loss. Finally, 4,4-dihydroxy dicyclohexane (BCHD) was introduced to form physical crosslinking via hydrogen bonding between hydroxyl groups and fluorine atoms. BCHD, featuring high polarity and a wide bandgap (8.84 eV), enhances the dielectric constant of the polymer while simultaneously suppressing carrier transition. Consequently, the FPNI 50 D 4.5 B 0.5 achieves complete decoupling of T g (250.4 °C), bandgap (4.229 eV), and dielectric constant (4.01), while exhibiting outstanding high-temperature energy storage performance. At 150 °C and an electric field strength of 600 MV/m, it delivers an energy storage density of 6.5 J/cm 3 with an efficiency of 90 %. The performance not only surpasses that of the pure polymer PNI but also demonstrates strong competitiveness among reported polymer composites.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Qiuyang Zhang,Ruirui Ma,Kunpeng Jia,Shunhang Dong,Jie Chen,Changjiang Pan
Titanium and its alloys, as the most prevalent materials for orthopedic implants, face two critical challenges in clinical practice: inadequate osseointegration and susceptibility to bacterial infection. To resolve these issues, a multifunctional coating (TNT+XGPP) was developed on Ti implants via three steps: electrochemical anodization to construct TiO 2 nanotube (TNT), hydrothermal loading of bone-affinity Ga 3+ ions (TNT+XG) at different concentrations, and carbodiimide-mediated grafting of γ-polyglutamic acid (γ-PGA) via a polydopamine intermediate layer. The morphology, composition, surface wettability, and ion release behavior of the prepared coatings were thoroughly characterized. The coatings were assessed for early-stage osteoblast growth behavior, Ca-P apatite formation capacity, and antibacterial activity. The characterization results confirmed that Ga 3+ ions and γ-PGA were successfully incorporated into TiO 2 nanotubes, significantly enhancing hydrophilicity. The TNT+XGPP coating, in conjunction with the nanotubes, Ga 3+ ions at appropriate concentrations (5, 20, and 50 mM), and γ-PGA, not only facilitated osteoblast adhesion and proliferation, but also upregulated the expression of osteogenic functional factors (e.g., alkaline phosphatase, osteocalcin, and runt-related transcription factor-2). In contrast, an elevated concentration of Ga 3+ ions (100 mM) in the coating exerted a certain inhibitory effect against osteoblast growth. The TNT+XGPP coating accelerated the in-situ deposition of bone-like Ca-P apatite, attributing to the synergy of γ-PGA and Ga 3+ ions. The released Ga 3+ ions exerted remarkable antibacterial effects against E. coli and S. aureus , with their concentration positively associated with antibacterial activity. This work offers a novel strategy for enhancing the bone affinity and antibacterial properties of Ti-based orthopedic implants.
✓ 已验证
产品关联
DOI
高影响因子
Chemical Engineering Journal Advances
·
2025
·
IF 7.1
Amare Aregahegn Dubale,Borsamo Boroje,Workineh Mengesha Fereja,Wei-Qi Wang
The use of herbicides in farming to manage growth, combat pests, and enhance crop production ultimately contributes to environmental pollution. However, the removal of these herbicides remains challenging due to high costs, limited adsorption efficiency, complex synthesis, and poor stability of the adsorbents. In this study, we synthesized a nickel oxalate metal-organic frameworks like coordination compound (Ni-Ox) using a straightforward hydrothermal method for the adsorptive removal of 2,4-dichlorophenoxyacetic acid (2,4-D) from wastewater samples. The adsorbent exhibited a unique morphology with a mesoporous structure, abundant functional groups, and a homogeneous elemental composition and distribution, as characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and Brunauer-Emmett-Teller (BET) analysis. Ni-Ox demonstrated an exceptionally high removal efficiency of 99.7% for 2,4-D under optimal adsorption conditions: pH 2, contact time of 60 minutes, dose of 80 mg, stirring speed of 120 rpm, batch volume of 50 mL, and an initial concentration of 100 mg L⁻¹. The adsorption of 2,4-D on Ni-Ox was best described by the Langmuir model, with a maximum theoretical adsorption capacity of 384.6 mg g⁻¹ at 298 K. The kinetic data were best fitted by the pseudo-second-order model, yielding a rate constant of 2.8 × 10⁻³ g mg⁻¹ min⁻¹ and a q e value of 60.98 mg g⁻¹. Thermodynamic analysis indicated that the adsorption process was both endothermic and spontaneous, as evidenced by a positive ΔH° (+65.9 kJ mol⁻¹) and negative ΔG° values. The adsorption mechanism of 2,4-D on Ni-Ox was elucidated through post-characterization using XPS, FTIR, and XRD, and was found to be primarily driven by electrostatic attraction, hydrogen bonding, and van der Waals forces. Furthermore, Ni-Ox maintained an efficiency of over 80% even after multiple regeneration and reuse cycles. These findings provide valuable insights for the design of effective adsorbents for the herbicide removal from aquatic environment.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2025
·
IF 14.2
Mengyao Wang,Hui Cao,Zhihao Huang,Zhixun Lin,Shangying Ye,Ying Li,Yingzi Hua,Zhenzhen Wei,Yan Zhao
Aerogels have garnered considerable attention in the field of thermal insulation over the past few decades, attributed to their lightweight, high porosity, and ease of functionalization. In this work, inspired by the structural stability of a frame-wall and the favorable formability of ceramic materials, a cellulose/clay composite aerogel (BAG) has been designed utilizing bacterial cellulose (BC) as a flexible skeleton, reinforced with rod-like attapulgite (ATP) and sheet-structured kaolin (GLT) clays through a combination of vacuum filtration and freeze-drying techniques. The resultant aerogel exhibits a frame-wall like structure, characterized by a three-dimensional interpenetrating network, and is constructed through hydrogen bonding, covalent crosslinking, and electrostatic attraction interactions among the constituents, thus offering the BAG with a compressive strength of 2.638 MPa while maintaining a low density (0.14 g/cm 3 ). Moreover, the porous structure effectively reduces the thermal conductivity to 0.047 W/(m·K) by prolonging and complicating the heat conduction path, and the elevated clay content enhances the limiting oxygen index (LOI) to 64.7%, demonstrating excellent thermal insulation and intrinsic flame-retardant properties. Therefore, the integration of biomass and mineral resources offers promising avenues for the development of multifunctional green aerogels that exhibit mechanical robustness and advanced thermal management capabilities.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Hongdong Wang,Baocheng Zhou,Yanzhu Li,Dengli Feng,Meng Shi,Wushige Zhang,Jianwei Li,Xiujuan Shang
Reliable operation of epidermal sweat-sensing electronics necessitates devices that are both stretchable and capable of maintaining stable contact with biological tissues. Such integrated sweat sensors enable the continuous and reliable collection of physiological signals associated with health and disease, offering new opportunities for advancing biomedical electronics. Here, we present a novel stretchable and bioadhesive sweat-sensing platform that establishes a robust and intimate interface with the epidermis, ensuring stable adhesion without causing chemical irritation or compromising electrical performance under mechanical deformation. This platform incorporates multiple potentiometric and amperometric sensors for highly sensitive and selective analysis of key sweat biomarkers, including lactate, glucose, and chloride. A printed tough-interface enhances mechanical resilience against tensile strain, while a soft bioadhesive gel ensures firm and conformal attachment to the skin. Systematic electrical characterizations confirm exceptional stability in sweat-sensing performance under mechanical strains exceeding 30 %, with minimal signal disruption from motion artifacts. These findings provide a robust framework for improving the mechanical-electrical integrity and tissue-device integration of stretchable sensors, laying the foundation for the development of highly stable and reliable biomedical electronics.
✓ 已验证
产品关联
DOI
高影响因子
Nutrients
·
2025
·Vol. 17
·期 20
·3249
·
IF 5
Ting Xia,Zhenjie Liu,Wenya Ding,Liting Deng,Xinyang Ning,Jianfang Feng
Background/Objectives:Achyranthes bidentata(AB), recognized as a food and traditional Chinese medicine, exhibits notable biological activity. Our previous study showed the hypoglycemic effect ofAchyrantha bidentata polysaccharide(ABP). The properties and digestion process of polysaccharides affect their pharmacological activities. The digestion characteristics of ABP are unclear. In this study, we aimed to explore the characteristics of ABP’s simulated digestion and its prebiotic properties and hypoglycemic effects.Methods: We used simulated digestion methods to investigate the alterations in ABP levels in the process of digestion and fermentation. Animal experiments were used to compare the effects of the prebiotic properties of ABP on normal control (NC) and type 2 diabetes mellitus (T2DM) mice. Then, in order to further verify the hypoglycemic effect of ABP after fermentation (ABPF), α-glucosidase activity and glucose uptake in Caco-2 cells were examined.Results: The results showed that ABP was anti-digestive and mainly degraded by the intestinal flora. Moreover, ABP showed a stronger promoting advantage against beneficial bacteria and inhibited harmful bacteria in the T2DM mice. Compared with NC mice, after ABP treatment, T2DM mice showed a higher increase in levels of short-chain fatty acids (SCFAs). Additionally, the glucose uptake and α-glucosidase activity of Caco-2 cells were significantly decreased after treatment with ABPF.Conclusions: These results underscore the potential of ABP as a prebiotic candidate for gut health promotion and T2DM alleviation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2025
·Vol. 30
·期 20
·4088
·
IF 4.6
Wenjing Cai,Canqi Huo,Jisuan Tan,Zirun Chen,Yanzhen Yin,Yong Jin
Polybutylene succinate (PBS), as one of the most promising multi-application polymer, still suffers from low toughness, poor miscibility, and high crystallinity. Blending with starch is an effective strategy to improve the properties of PBS, but the compatibility and dispersity between starch and PBS still need to be optimized. In this study, mechanical ball milling was carried out to synthesize esterified starch and the subsequent PBS/esterified starch blend. The FT-IR and XPS analyses confirmed the existence of molecular interactions between PBS and esterified starch. SEM images showed a homogeneous surface for the PBS/esterified starch blend, highlighting the favorable compatibility and good dispersion of starch within the PBS matrix. TGA, DSC, and VSP tests indicated that the introduction of esterified starch into PBS lowered the thermal transition temperatures, thereby enhancing the processability. WCA measurements displayed that the water contact angle of the PBS/esterified starch blends gradually decreased with increasing esterified starch content, proving the improved hydrophilicity of PBS/esterified starch blends. Mechanical testing indicated that incorporating 5 wt% esterified starch into PBS significantly improved the tensile strength to 36.35 ± 2.16 MPa and the breaking elongation to 27.18 ± 5.08%, surpassing those of the pure PBS, PBS/esterified starch mixture, and PBS/starch blend. Our study indicates that mechanical ball milling is an efficient method to improve the properties of PBS composites.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Neuroimmune Pharmacology
·
2025
·Vol. 20
·期 1
·1-23
·
IF 3.5
Liu Jiawei,Shi Yusheng,Jin Lingling,Sun Baixue,Wang Ruonan,Ge Guangbo,Zhu Guanghao,Cui Xiaolin,Zhao Jie,Zhang Yan,Li Sheng
Parkinson’s disease (PD), the second most prevalent neurodegenerative disorder, remains without a curative pharmacological intervention. Sea Cucumber Peptides (SCP) are recognized for their antioxidant properties and neuroprotective potential, while no specific SCP have been documented for PD treatment. Moreover, sea cucumbers have long been consumed as a traditional food; viewed through the lens of “food-medicine homology”, their peptides possess clear pharmaceutical potential. This study sets out to pinpoint particular peptide sequences from sea cucumbers could combat PD, exploring their therapeutic efficacy and the underlying mechanisms. We treated Rotenone (Rot)-induced C57BL/6 J mice and SH-SY5Y cells with the SCP which were extracted from the sea cucumbers, to assess the impact on behavioral metrics in mice, histopathological outcomes, cellular viability, and in vitro bioactivity. Employing a combination of peptide profiling and silico analysis, we established a SCP spectrum to identify novel SCP with potential anti-PD activity. The therapeutic effects and mechanisms of the peptides were further investigated in 7-day-old zebrafish larvae and SH-SY5Y cells exposed in Rot, respectively. Our findings indicate that the SCP significantly improved behavioral deficits in mice, reduced the degeneration of dopaminergic neurons in the substantia nigra, and increased the survival of Rot-exposed SH-SY5Y cells. Notably, a novel peptide, Gln-Trp-Phe-Asp-Trp (QWFDW), emerged from our peptide profiling and in silico analysis, showing significant anti-PD activity. QWFDW was demonstrated to enhance the behavioral performance of Rot-induced zebrafish larvae, and ameliorate the pathological features of PD by attenuating endogenous reactive oxygen species (ROS) and maintaining mitochondrial membrane potential in SH-SY5Y cells. At the cellular level, QWFDW activates the Nrf2/HO-1/GPX4 pathway to alleviate ferroptosis and exert therapeutic effects on PD. Collectively, our results point out that SCP, particularly QWFDW, was a prospective therapeutic agent for PD. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS LETTERS
·
2025
·Vol. 155
·期 11
·1-15
·
IF 2.4
Yang Dawei,Hu Yanan,Qi Zhiwei,Li Qiaoling,Yu Chengcheng
The world is currently facing the dual challenges of energy scarcity and environmental degradation. As a highly promising carrier of clean and renewable energy, hydrogen has attracted significant attention, with high-efficiency water electrolysis recognized as a key pathway for the large-scale production of green hydrogen. Among various electrocatalysts, transition metal Co-V-based materials demonstrate remarkable potential. In this study, we successfully synthesized a highly stable amorphous Co-V-B catalyst on a nickel foam (NF) substrate by constructing a Co-V bimetallic system followed by boron doping to enhance its performance. Electrochemical evaluations indicated that the catalyst delivers superior Hydrogen evolution reaction (HER) performance, requiring only 47 mV overpotential to attain a current density of − 10 mA cm −2 , along with a low charge transfer resistance of 1.14 Ω. Additionally, the catalyst demonstrated remarkable durability, sustaining stable HER activity during 16 h of continuous chronopotentiometric (CP) operation. This study systematically explores the preparation of Co-V/NF catalysts and highlights the significant impact of boron incorporation on improving catalytic performance, providing meaningful guidance for developing advanced electrocatalysts for water splitting applications. Graphical
✓ 已验证
产品关联
DOI
高影响因子