ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY
·
2024
·
IF 3
Ma Licheng,Qi Jungang,Gao Leqi,Wei Tao,Guo Yanhua
In this study, a cesium ion imprinted polymer (Cs(I)-IIP) was prepared by free radical thermal polymerization using 18-crown-6-ether (18C6) as ligand, methacrylic acid (MAA) as functional monomer, and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent, which can be used for adsorption and separation of cesium ions from low-concentration solutions. The adsorption kinetic and isotherm results showed that the adsorption of Cs + fitted to the pseudo-second-order kinetic model and Langmuir model, indicating that the adsorption of Cs + on Cs(I)-IIP was the monolayer chemical adsorption. The maximum adsorption capacity was 84.21 mg·g − 1 . The selective adsorption properties are performed in Cs + , Li + , Na + , and K + multicomponent systems. The results showed that the Cs(I)-IIP has a high selectivity in the presence of coexisting Li + , Na + , and K + , and the selectivity coefficients ( K’ ) of Cs(I)-IIP for Cs + /Li + , Cs + /Na + , Cs + /K + are 2.1, 1.56, and 1.33, respectively. The high adsorption capacity and selectivity are attributed to the introduction of imprinting technology to form specific Cs + recognition adsorption sites, and the 18C6 cavity was easier to recognize Cs + in the competitive adsorption process. Finally, the Cs(I)-IIP can be regenerated and reused for 10 times with the adsorption capacity only decreased by 8.1%, indicating that the polymer has good reuse performance.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2024
·Vol. 16
·期 11
·1570-1578
·
IF 2.7
Meijuan Du,Xin Cheng,Qian Chen,Xueqin Xu
In this paper, a novel and sensitive electrochemical aptasensor for sulfadimethoxine (SDM) detection has been designed based on the triple helix structure/exonuclease I (Exo I)-assisted double signal amplification strategy. The aptamer probe (Apt) hybridizes with the signal transduction probe (STP) on the electrode to form a rigid double-stranded DNA (dsDNA) structure, so that the STP remains upright and methylene blue (MB) on the STP is far away from the electrode surface, resulting in a delicate current signal. In the presence of SDM, the SDM and Apt combine into a complex, leading to the transfer of the Apt and the exposure of the STP. Meanwhile, the added Exo I can digest the Apt to realize the cyclic amplification of SDM. After the addition of the signal probe (SP), a triple helix structure between the SP and STP is formed under acidic conditions, and MB on the STP and SP collide with the electrode surface to generate a strong electrochemical signal. The proposed aptasensor combines the features of the triple helix structure and Exo I to achieve double signal amplification for the sensitive detection of SDM with a wide linear range of 0.05–1000 ng mL−1 and a low detection limit of 0.02 ng mL−1. Furthermore, it has been successfully used to detect SDM in milk and lake water samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Bin Zhang,Ziwen Han,Yanjun Xin,Yanjie Zhang,Wenqian Li,Boda Li,An Ding,Jun Ma,Xu He
Herein, vacuum ultraviolet (VUV) was introduced to enhance the activation rate of peroxymonosulfate (PMS) by copper ions for the first time. Compared with ultraviolet (UV), the redox cycle rate of Cu(II)/Cu(I) was prominently enhanced by VUV due to the combined driving effect of UV, hydrated electron and active hydrogen atoms. The accelerated Cu(II)/Cu(I) cycle in VUV/PMS/Cu(II) system led to 2.89 times higher degradation efficiency of 2,4-dichlorophenol (2,4-DCP) than that by UV/PMS/Cu(II) system. More importantly, the initial Cu(II) concentration (5 μM) in VUV/PMS/Cu(II) system was only 1/5 of the guideline value in WHO standards for drinking water, and the initial PMS concentration was also 1 order of magnitude lower than that in most PMS based systems for water treatment. Furthermore, the reaction mechanism and possible degradation pathways of 2,4-DCP were also proposed. This study verified the possibility for the utilization of trace Cu(II) in water to decompose refractory micro-pollutants by PMS activation.
✓ 已验证
DOI
高影响因子
Advanced Healthcare Materials
·
2025
·
IF 9.6
Minggang Yang,Yufan Zhang,Zhenhao Hou,Jianbo Wu,Fuwei Liu,Jun Wu,Kelvin W.K. Yeung,Wenhao Qian,Xuanyong Liu,Liang Kong,Yunpeng Li,Jiajun Qiu,Guocheng Wang
Antibiotic therapy is a key strategy for treating infections associated with orthopedic implants, yet its limited effectiveness and potential to disrupt bone healing highlight the need for innovative approaches. Herein, a TiO 2 -Graphene (TiO 2 -G) metastructure is developed on Ti implant surface using a hydrothermal method coupled with plasma-enhanced chemical vapor deposition (PECVD), showing strong near-infrared light (NIR) absorption. The antibiotic doxycycline (DOX) is successfully loaded onto TiO 2 -G and exhibited enhanced NIR release. The promising antibacterial efficacy is proven by both in vitro and in vivo tests with NIR irradiation for 5 min, which is ascribed to the synergistic photocatalytic activity of TiO 2 -G and NIR-responsive release of DOX. Interestingly, after 5 min of NIR irradiation, the TiO 2 -G metasurface neutralized the immediate negative effects of photodynamics and even upregulated the expression of osteogenic genes (osteocalcin (OPN), osteopontin (BSP), and bone sialoprotein (OCN)), with particularly enhanced effects observed on day 14. Moreover, the sustained release function of TiO 2 -G significantly mitigated the cytotoxicity of free antibiotics with antibacterial capabilities comparable to those of TiO 2 -G/DOX under NIR irradiation for 5 min. Consequently, the in vivo studies proved that the TiO 2 -G metastructure enhanced the osteointegration of the implant even in the absence of infection when loaded with DOX.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Xuan He,Dan Liang,Jun Zhou,Kangjing Li,Beibei Xie,Chunyun Liang,Cong Liu,Zhiyong Chen,Xinxin Chen,Ao Long,Shufang Zhuo,Xiaoping Su,Ying Luo,Wenxia Chen,Fengfeng Zhao,Xinglu Jiang
The cell nucleus serves as the pivotal command center of living cells, and delivering therapeutic agents directly into the nucleus can result in highly efficient anti-tumor eradication of cancer cells. However, nucleus-targeting drug delivery is very difficult due to the presence of numerous biological barriers. Here, three antitumor drugs (DNase I, ICG: indocyanine green, and THP: pirarubicin) were sequentially triggered protein self-assembly to produce a nucleus-targeting and programmed responsive multi-drugs delivery system (DIT). DIT consisted of uniform spherical particles with a size of 282 ± 7.7 nm. The acidic microenvironment of tumors and near-infrared light could successively trigger DIT for the programmed release of three drugs, enabling targeted delivery to the tumor. THP served as a nucleus-guiding molecule and a chemotherapy drug. Through THP-guided DIT, DNase I was successfully delivered to the nucleus of tumor cells and killed them by degrading their DNA. Tumor acidic microenvironment had the ability to induce DIT, leading to the aggregation of sufficient ICG in the tumor tissues. This provided an opportunity for the photothermal therapy of ICG. Hence, three drugs were cleverly combined using a simple method to achieve multi-drugs targeted delivery and highly effective combined anticancer therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2024
·
IF 11.2
Xiaotu Yang,Zihao Yue,Ruixiang Deng,Zhengliang Zhang,Tao Zhang,Lixin Song
Stability hinders further development of all-inorganic CsPb X 3 ( X = Cl, Br, I) quantum dots (QDs) although they exhibit promising prospects in optoelectronic applications. Coating perovskite quantum dots (PQDs) with a glass network to form QD glass can significantly improve their stability. However, the dense glass network degrades their luminescent performance. In this work, the crystallization behavior of PQDs in glass and better luminescence properties are prompted by introducing titanium dioxide into borosilicate glass. The luminescence intensity of TiO 2 -doped CsPbBr 3 QD glass is increased by 1.6 times and the PLQY is increased from 49.8 % to 79 % compared to the undoped glass. Evidence proves that the improved properties are attributed to the enhanced nucleation effect of titanium dioxide during the annealing process. Benefiting from the densification of the glass network caused by titanium dioxide doping, the stability of the PQD glass is further improved. LED devices with an ultra-wide color gamut that fully covers the NTSC1953 standard and achieves 128.6 % of the NTSC1953 standard as well as 91.1 % of the Rec.2020 standard were fabricated by coupling PQD glass powder, demonstrating promising commercial applications of PQD glass in optoelectronic displays.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2024
·
IF 5.6
Jizhong Shi,Manshan Liang,Yiting Qiu,Jin Zhang,Shihua Wang,Heng Fang,Yongsheng Jiang,Xiaoxia Ye,Yanshu Luo,Zu-Sheng Huang,Yun-Yun Quan
Multifunctional type-I photosensitizers (PSs) for hydrogen sulfide (H 2 S) detection and photodynamic therapy (PDT) of hypoxia tumors exhibits attractive curative effect but remains a challenging task. Herein, a mitochondria targeted aggregation-induced emission (AIE) photosensitizer TSPy-SS-P was designed and synthesized, which could be used for H 2 S detection and simultaneously type I and type II PDT. TSPy-SS-P had excellent selectivity and anti-interference abilities for endogenous and exogenous H 2 S detection in tumor cells. TSPy-SS-P was able to distinguish tumor cells with high level of H 2 S from normal cells by fluorescence “turn off” response to H 2 S. In addition, TSPy-SS-P showed type Ⅰ and type Ⅱ reactive oxygen species (ROS) generation ability to effectively ablate hypoxic tumor cells. TSPy-SS-P showed mitochondria targeting capacity which could produce ROS in situ to disrupt mitochondria and promote cell apoptosis. In vivo PDT experiments showcased that TSPy-SS-P had excellent tumor retention capability, effective tumor ablation ability and good biocompatibility. This work provided a two-pronged strategy to design organelles targeted photosensitizers for H 2 S detection and effective PDT of tumors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2024
·
IF 2
Xiaofang Luo,Yuntian Xiao,Linlin Shi,Lingli Hou,Yongkang Liu,Ling Zhou,Qiuxiang Yin
Prednisolone (PDL), a corticosteroid extensively used in the treatment of allergic and autoimmune inflammatory diseases, faces limitations in clinical application due to its poor water solubility. Consequently, grasping the solid–liquid equilibrium behavior across diverse solvents is imperative for advancing the development of solid formulations with improved bioavailability. This study measured the solubility of PDL Form I in 13 pure solvents using gravimetric analysis and employed molecular dynamics, including molecular electrostatic potential surface analysis, Hirshfeld surface analysis, the independent gradient model based on Hirshfeld partitioning, radial distribution function, and solute–solvent interaction energy calculations, to explore the solid–liquid equilibrium behavior. The solubility of PDL Form I across various solvents exhibited a temperature-dependent increase, showing the largest variation in acetone. Radial distribution function analysis indicated multiple hydrogen-bonding interactions between the PDL molecule and the solvents tested. The calculations of solute–solvent interaction energy revealed that ethanol had the highest interaction energy with PDL, correlating with its the highest solubility. The validity of the solid–liquid equilibrium data was confirmed by fitting to the Apelblat equation, λh model, van’t Hoff equation, and NRTL equation, with an average relative deviation below 2.5, indicating good correlation.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Translational Medicine
·
2025
·Vol. 23
·期 1
·1-19
·
IF 7.5
Xing Chunyang,Hu Wei,Zhao Liyuan
Background Osteosarcoma (OS) is one of the most common malignancies arising in bone. Hypoxia and immune regulation are pivotal in tumor biology. However, their combined effects and mechanisms in OS remain understudied. This study aimed to explore the role and mechanism of hypoxic-induced M2 macrophages in promoting the progression of OS.Methods Differentially expressed proteins in hypoxic macrophage supernatants were detected by antibody array. Cell functional experiments, siRNA-mediated gene silencing, and overexpression transfection were used to study osteopontin (OPN) and its supernatant effect. Bioinformatics analysis was applied to investigate downstream targets and pathways, and a xenograft model was established to assess in vivo effects.Results Our data revealed that hypoxic M2 macrophage supernatant enhanced OS malignancy and epithelial-mesenchymal transition, activating cancer pathways. Hypoxia upregulated OPN in M2 macrophages, and OPN inhibition reduced its tumor-promoting effect. Early growth response 3 (EGR3) was differentially expressed in OS cells treated with the supernatant, and its overexpression inhibited OS cell migration, reversing tumor promotion. Interferon-stimulated gene 15 (ISG15), a key differentially expressed gene related to OPN and EGR3 overexpression, inhibited OS cell proliferation and migration. Additionally, OPN increased retinoic acid-inducible gene I (RIG-I) expression and enhanced signal transducer and activator of transcription 3, nuclear factor kappa B, and extracellular signal-regulated kinase signaling, while EGR3 and ISG15 overexpression inhibited these effects. Silencing ISG15 restored pathway activation and reversed the inhibitory effect of EGR3 on OS cell migration. Dual-Luciferase reporter gene assay confirmed that EGR3 activates ISG15 transcription. OPN treatment upregulated DNA (cytosine-5)-methyltransferase 1 (DNMT1) expression, and ChIP assays demonstrated that EGR3 overexpression enhanced DNMT1 binding to the EGR3 promoter. These findings suggest that OPN promotes OS malignancy by downregulating EGR3 and ISG15, and by enhancing RIG-I expression, as validated in a xenograft model of OS.Conclusion Our findings demonstrate that hypoxic-induced M2 macrophages promote OS progression through OPN-dependent mechanisms, including inhibition of EGR3 and ISG15 expression and upregulation of RIG-I.Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Zizhao Fu,Jie Zhao,Rui Jiang,Shiliang Mei,Wanlu Zhang,Ruiqian Guo
I-III-VI alloyed quantum dots (QDs) have shown great application potential in many fields. At present, Al-based alloyed QDs have become a kind of ideal material of the color conversion layer of WLEDs because of their blue-emission, abundant raw material content, and the strong stability of Aluminum oxides. In this study, we synthesized blue-emitting CuAlSe 2 /ZnSe QDs and dual-emitting CuAlGaSe/ZnSe QDs by using hot-injection and one-pot method respectively, with a photoluminescence quantum yield (PL QY) of 46.75% and 68.79%. Their spectral tuning effect and the luminescence mechanism were investigated and discussed by changing the elemental molar ratios and nucleation temperature. By changing the Cu/(Al+Ga) and Al/Ga molar ratio, the emission wavelength of CuAlGaSe/ZnSe QDs was adjustable from 456 nm to 631 nm, with the Al and Ga competition mechanism in CuAlGaSe/ZnSe was also proposed. Finally, a single-component dual-emission CuAlGaSe/ZnSe WLED with a color rendering index (Ra) of 91.4 was prepared. This work demonstrated the superior fluorescence performance of multi-component QDs and the potential application of Al-based QDs in WLEDs.
✓ 已验证
产品关联
DOI
高影响因子
Environmental Chemistry and Ecotoxicology
·
2025
·
IF 8.2
Gao Feiyue,Zhou Chuncai,Li Chen,Xu Shihai,Li Zhiguo,Li Xin,Liu Guijian
The novel ultra-micro porous carbon sheet (PCs) with exceptionally high surface area (3034 m 2 /g) were synthesized through green potassium citrate (K 3 C 6 H 5 O 7 ) activation for efficient thallium(I) [Tl(I)] removal from wastewater. The static adsorption results revealed that PCs achieved exceptional removal efficiencies above 95 % across pH 6–12, maintained high selectivity against competing ions (K + , Na + , Cl − , F − ) and organic interferents, and retained above 80 % capacity after five regeneration cycles. Adsorption followed Pseudo-second order kinetics and Freundlich isotherm models, indicating multilayer adsorption on heterogeneous surfaces, with thermodynamics confirming spontaneous exothermic processes. The density functional theory (DFT) calculation results demonstrated that lone pair electrons involved in complexation and π-electrons participating in coordination were supplied by oxygen-containing functional groups and aromatic rings, respectively. The sorption mechanisms included surface complexation, ion exchange, electrostatic attraction, and cation-π interaction. The column sorption results demonstrated the influent flow rate, bed height, and initial Tl(I) concentration-dependent removal performance. The Tl(I)-containing wastewater at ppm level could meet the discharge standard by optimizing influent flow rate and bed height in column adsorption. The dynamic sorption process was described properly by Thomas and Yoon-Nelson models. This study provides a systematic theoretical foundation for designing porous carbons in Tl-contaminated water remediation.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2025
·
IF 5.5
Xinran Li,Yuwei Zhong,Habib Ullah,Jian Luo,Lee Li,Ghafar Ali,Alaa G. M. Osman,Xiujian Zhao,Yi Xie
The intrinsic structural lability and limited processability of inorganic halide perovskites heavily hamper their commercial applications. Herein, we develop a facile and scalable room-temperature (RT) water-based procedure for the synthesis of Na–Cu-codoped CsPbIxBr3–x-embedded Pb(OH)I (denoted as the Na–Cu–CsPbIxBr3–x@Pb(OH)I) composite to overcome the above-mentioned bottlenecks. Compared to Na doping, the codoping with Na and Cu leads to a slight shift of the photoluminescence (PL) peak position from ∼612 to 622 nm, increases the PL intensity by 32.5 times, and improves the PL quantum yield from 1% to 5%. Notably, the optimized Na–Cu–CsPbIxBr3–x@Pb(OH)I composite displays outstanding stability under various harsh environments such as soaking in RT water or hot water (up to 90 °C) and annealing at high temperature, which indicates that Pb(OH)I can act as an effective water-blocking and protective encapsulation layer. It is more interesting that the photoluminescence (PL) intensity of Na–Cu–CsPbIxBr3–x@Pb(OH)I can be significantly increased to 2.17 and 1.29 times after soaking the sample in RT water for 35 and 105 days, respectively, and 1.25 times even after immersing in hot water (90 °C) for 6 h, indicating an improved optical property. Meanwhile, the crystal structure and emission wavelength are maintained. The insight of this work is quite beneficial for designing highly stable inorganic perovskite-based nanomaterials for realization in light-emitting devices and other optoelectronic devices.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）