ENERGY & FUELS
·
2026
·Vol. 40
·期 30
·16299-16315
·
IF 6
Wu Zhi-Ming,Yang Yang,Ye Shuang-Xiang,Yang Jie-Yuan,Liang Ke-Sheng,Li Wei-Yang,Zhong Chuan-Rong
After long-term waterflooding, considerable adhered residual
oil
remains trapped in reservoir pores, and its mobilization is jointly
restricted by capillary forces, oil–solid adhesion, and local
wettability. Herein, amphiphilic magnesium-based nanosheets (AMN)
were prepared via amino functionalization and hydrophobic-chain grafting
to improve the mobilization of adhered residual oil after waterflooding.
AMN exhibited a two-dimensional sheet-like morphology, with a lateral
size of approximately 70–160 nm and a thickness of 12–13
nm. Interfacial tests demonstrated that AMN reduced the oil–water
interfacial tension, altered the wettability of oil-wet surfaces,
and improved emulsion stability. To further reveal the dynamic detachment
mechanism of adhered oil films, a dynamic oil-film shrinkage evaluation
method was developed, and a comprehensive detachment index, F detach , was established by integrating oil-film area detachment,
shrinkage kinetics, apparent adhesion release, and interfacial tension
reduction capability. The results showed that AMN rapidly induced
oil-film boundary recession and contact-angle increase, transforming
adhered oil films from a spreading state into a contracted, weakly
adhered, and more mobilizable state. The F detach value
of AMN reached 0.9232, which was significantly higher than those of
SDBS and water, and random-weight sensitivity analysis confirmed the
robustness of this evaluation. Microscopic displacement experiments
showed that AMN effectively mobilized multiple types of residual oil,
achieving a final microscopic recovery of 93.08%. Core flooding further
confirmed that AMN achieved a final recovery of 41.40% and an incremental
recovery of 21.21%, approximately 2.25 times that of SDBS. These results
demonstrate that AMN enhances adhered residual oil mobilization through
the synergistic effects of interfacial tension reduction, wettability
regulation, emulsion stabilization, and dynamic oil-film detachment,
providing guidance for the design and evaluation of nanosheet-based
oil-displacing agents.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Zhifang Liu,Le Liu,Kunxiang Deng,Jiejun Li,Caiyu Ge,Xiang Ye,Yixi Xie,Pengcheng Zhao,Junjie Fei
Cotton-derived carbon coupled with Ce-doped ZnO via in-situ pyrolysis. • Portable Ce-ZnO-CNF@CC/SPE sensor was developed for on-site CPZ detection. • DFT verified optimized electronic structure and accelerated charge transfer. • Ultrasensitive response with a low limit of detection. • Reliable recovery in real samples for environmental monitoring. On-site monitoring of the emerging organic pollutant chlorpromazine (CPZ) is severely limited by the absence of low-cost, portable, and high-performance sensors. Herein, a disposable screen-printed sensor (Ce-ZnO-CNF@CC/SPE) was fabricated by in-situ growing Ce-doped ZIF-8 on cotton-derived carbon, followed by a one-step pyrolysis strategy. Density functional theory (DFT) calculations confirmed that trace Ce doping induces robust p-d-f orbital hybridization with the host lattice without structural disruption. The introduction of Ce 4f impurity levels narrows the band gap and significantly elevates the density of states near the Fermi energy. This robust electronic modulation accelerates charge-transfer kinetics and optimizes the CPZ adsorption affinity. Under optimized conditions, the fabricated sensor exhibited a remarkably broad linear range and an ultra-low limit of detection, along with excellent anti-interference, reproducibility, and stability. Furthermore, highly accurate and reliable recoveries were achieved in complex real-world matrices, including human serum and environmental water samples. This work provides a reliable portable platform for on-site CPZ monitoring and establishes an electronic structure-activity paradigm for designing highly dispersed, biomass-derived carbon-based sensors. Download: Download high-res image (151KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Jianan Song,Feng Wei,Beibei Chen,Guangxing Huang,Jiajia Meng,Kan Zhang
Line-plane CNT@MXene hybrids are constructed via electrostatic assembly. • CNTs effectively suppress MXene restacking and improve dispersion. • In-situ cross-linking drives filler rearrangement and network densification. • The composites exhibit high electrical and thermal conductivity with flexibility. • The composites enable strain sensing and thermal management capabilities. Flexible electronics require elastomeric composites that integrate efficient thermal management, electrical conductivity, mechanical compliance, and stable sensing capability. However, MXene-based composites are often limited by nanosheet restacking, filler aggregation, and poor network stability in elastomer matrices. Herein, a line-plane CNT@MXene hybrid filler was constructed by electrostatic self-assembly and incorporated into solution-cross-linked PDMS (S-PDMS) through a solution-driven in-situ cross-linking strategy. The CNTs bridged adjacent MXene nanosheets and suppressed their restacking, while solvent-evaporation-induced polymer chain shrinkage promoted filler rearrangement and network densification. As a result, the CNT@MXene/S-PDMS composite achieved an electrical conductivity of 0.126 S/cm and a thermal conductivity of 1.57 W·m −1 ·K −1 at 14.0 wt% filler content, while maintaining good stretchability and resilience. The composite also exhibited stable conductivity under repeated deformation, sensitive strain-sensing behavior, and effective heat-dissipation performance in LED thermal management. This work provides an effective strategy for constructing stable hybrid conductive networks in flexible polymer composites for integrated thermal management and strain sensing. Download: Download high-res image (168KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Hui Liu,Rong Lin,Yi Wu,Zhihao Huang,Yuchang Shen,Xuanxuan Lin,Nan Li,Shaoda Huang,Qipeng Li,Jinjie Qian
The rational design and facile synthesis of non‑platinum carbon catalysts with high energy conversion efficiency remain a core challenge in electrocatalysis. To address this, we successfully constructed a unique shell-in-shell catalyst through a phytic acid (PA) etching and secondary pyrolysis strategy, designated as CZIF-PA-Fe 2 P/NC. In this process, PA not only drives the selective etching of cubic ZIF-8 nanocrystals but also serves as an in situ phosphorus source to induce the uniform nucleation of highly active Fe 2 P nanoparticles embedded in ZIF-derived N,P-codoped carbon nanoboxes. Consequently, the obtained CZIF-PA-Fe 2 P/NC catalyst achieves an excellent oxygen reduction reaction (ORR) half-wave potential of 0.914 V, and maintains a 96.73% current retention over a 30-h stability test. When assembled into zinc-air batteries, the device delivers a peak power density of 157.58 mW cm −2 , a specific capacity of 795.76 mAh g −1 , and long-term cycling stability surpassing that of 20 wt% Pt/C. Finally, density functional theory calculations reveal that the synergistic electronic modulation between the N,P-codoped carbon substrate and Fe 2 P promotes an upward shift of the Fe d -band center, thereby optimizing the adsorption of key *OOH intermediates and significantly reducing the energy barrier of the rate-determining step. This work establishes a precise morphology design and interface engineering paradigm for developing cost-effective, high-performance metal-organic framework-derived non-noble-metal carbon electrocatalysts for energy conversion and storage applications. The selective etching of phytic acid not only endows the material with abundant pore diameters to enhance mass transfer but also serves as an in-situ phosphorus source to promote the uniform nucleation of highly active Fe 2 P nanoparticles. By employing PA-induced etching, shell-in-shell carbon catalysts were successfully fabricated to exhibit satisfactory oxygen reduction. Download: Download high-res image (196KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL RESEARCH
·
2026
·
IF 8.2
Shaozhen Dai,Yuqian Wang,Bin Xu,Peng Ding,Yu Zhou,Guansheng Han
Recycled aggregate concrete provides a sustainable route to reduce natural aggregate consumption and promote the recycling of construction and demolition waste. However, recycled aggregates generally contain residual old mortar, initial microcracks, and weak interfacial transition zones, which disturb the pore structure and increase cracking susceptibility under mechanical loading. Fiber reinforcement can improve crack resistance and toughness, but the reinforcing efficiency of polyvinyl alcohol (PVA) fibers is still limited by interfacial defects around the fiber–matrix transition zone. To address this issue, graphene oxide (GO)-coated PVA fibers were developed and incorporated into fiber-reinforced recycled aggregate concrete. Two coating methods, physical stirring and three-step dip coating, were compared. The coating morphology, elemental distribution, and chemical characteristics of the modified fibers were characterized using SEM–EDS, FTIR, and Raman spectroscopy. The results show that the three-step dip-coating method produced a more uniform and effective GO-based coating on the PVA fiber surface. Compared with the reference specimen, the compressive and flexural strengths of recycled aggregate concrete reinforced with three-step dip-coated GO-PVA fibers increased by 53.5% and 56.3%, respectively. Fractal dimension analysis and deep learning-assisted image analysis further indicate that GO-coated PVA fibers improved microstructural compactness, promoted tortuous crack propagation, and enhanced crack-bridging performance. Molecular dynamics simulations confirmed that GO nanosheets promoted interfacial stress transfer and energy dissipation, which supported the experimentally observed mechanical improvement. Life cycle assessment showed that although the GO coating process increased the production-stage environmental burden, the three-step dip-coating method exhibited better economic and environmental benefits after normalization by unit compressive strength. These findings demonstrate that GO-coated PVA fibers can simultaneously improve the mechanical performance and unit-strength environmental competitiveness of recycled aggregate concrete, providing a feasible strategy for developing high-performance and low-carbon cementitious composites.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Petroleum Science
·
2026
·
IF 6.4
Jia-Ning He,Yang Bai,Tuo-Ming Zhang,Deng Gu,Rui-Fang Wang
A composite plugging agent, glucose-derived carbon spheres grafted with poly(methyl methacrylate-co-octadecyl methacrylate-co-styrene) (GCS-g-PMOS), was synthesized by grafting an oil-absorbing polymer onto glucose-derived carbon spheres through suspension polymerization for application in oil-based drilling fluids. This material was designed to overcome the limited adaptability of conventional rigid plugging agents by integrating the structural support of carbon spheres with the swelling and filling capabilities of the polymer phase. Response surface methodology was used to optimize the preparation parameters, and the optimum formulation was determined to be 0.75 wt% glucose-derived carbon spheres, 1.5 wt% N , N ′-methylenebisacrylamide, and 2.0 wt% benzoyl peroxide. Under these conditions, the oil absorption capacity reached 9.02 g/g. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and wettability analyses confirmed successful grafting of the polymer phase and showed that the composite possessed good thermal stability and strong oil affinity. After aging at 160 °C, the addition of 6 wt% GCS-g-PMOS reduced the American Petroleum Institute (API) filtrate loss from 4.4 to 2.4 mL and decreased the filter cake thickness from 2.0 to 0.9 mm. The material also exhibited effective plugging performance in media of different scales and reduced the permeability of the filter cake, with a maximum permeability reduction rate of 63.53%. These results demonstrate that the integration of rigid carbon spheres and an oil-absorbing polymer is beneficial for forming a dense sealing structure and enhancing fluid-loss control in oil-based drilling fluids under high temperature conditions.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Defan Wang,Yi Zhao,Xinxin Zhao,Chengfu Han,Kangkang Zhou,Yajie Zhang,Wei Zhai,Guoqiang Zheng,Jianwei Xu,Kun Dai,Chuntai Liu,Changyu Shen
PRPP integrates strain and humidity sensing functions on a single unified sensing platform. • Its distinctive porous structure endows PRPP with a broad strain range (0–80%) and low energy loss coefficient of 0.13. • PRPP shows excellent humidity-sensing performance and can serve for real-time human respiration monitoring. • The integration of humidity/pressure dual-mode PRPP sensor creates a broader platform for its application. Flexible pressure sensors with porous architectures have attracted extensive attention owing to their excellent stability and sensing performance, demonstrating great potential in applications such as electronic skin and healthcare monitoring. However, most existing sensors are often limited to single-modal signal transduction, and achieving synergistic multifunctionality within a unified signal platform remains a significant challenge. Humidity, as an essential environmental and physiological parameter, plays a vital role in enabling advanced interactive perception. Therefore, integrating high-performance humidity sensing with flexible pressure sensing has emerged as an important research direction. Herein, a polydimethylsiloxane (PDMS) composite foam (PRPP) modified with polypyrrole (PPy), reduced graphene oxide (rGO), and polydopamine (PDA) was fabricated through sequential in-situ polymerization combined with ultrasonication. The PRPP exhibits excellent mechanical resilience (1% plastic deformation after 500 compressions, 0.13 energy loss coefficient at 80% strain), rapid response/recovery time (80 ms/100 ms) and a low detection limit (0.1% strain). Benefiting from the in-situ growth of PPy, PRPP also shows remarkable humidity sensitivity, enabling real-time environmental monitoring. Furthermore, a dual-mode human-machine interface based on a PRPP array is developed for contact pressure sensing and non-contact humidity perception, providing a strategy for flexible sensors in intelligent interactive systems. A multifunctional flexible sensor is designed and fabricated. The flexible sensor simultaneously integrates strain sensing performance and humidity sensing performance within a unified platform via a rational functional integration strategy. The construction of multi-modal HMI interface realizes both contact and non-contact sensing. The integration of HMI interface and artificial intelligence algorithm provides excellent development prospects for the sensor in the fields of intelligent sensing, information transmission and human-computer interaction. Download: Download high-res image (139KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Tianyu Hu,Fang Zou,Jie Yu,Siqian He,Shiyun Lai,Yuanjie Teng,Zaifa Pan
UNCA employs upconversion nanoparticles as signal probes for specific IGF-1 recognition. • Single-molecule counting enables IGF-1 detection with a low LOD of 6.04 pg/mL. • This method exhibits low cross reactivity and good recovery rates in milk products. There is rapidly growing interest in food nutrition assessment, particularly for nutrients present at low abundance. Here, an upconversion nanoprobe counting analysis (UNCA) is designed for ultra-sensitive detection of insulin-like growth factor-1 (IGF-1). The high sensitivity is attributed to the strong fluorescent intensity of upconversion nanoparticles (UCNPs) and highly specific antibody-antigen binding. Core–shell structured UCNPs are synthesized via co-precipitation followed by layer-by-layer epitaxial growth, and detection probes are constructed through hydrophilic ligand exchange and antibody conjugation. Two detection methods, traditional fluorescent intensity detection and single-molecule counting, are established with linear working ranges of 0.05–5000 ng/mL, which reach limit of detections (LODs) of 21.23 and 6.04 pg/mL, respectively. UNCA is further employed for analyzing three representative milk products, achieving recovery of 73.90%–107.09% with coefficients of variation (CVs) between 2.24% and 7.57%. This method demonstrates quantitative detection of trace-level IGF-1, especially via single-molecule counting. Download: Download high-res image (111KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2026
·
IF 5.2
Xueli Zuo,Feida Chen,Shujie Wu,Wei Zheng,Yuan Liu,Jun Li,Jifeng Zhang,Xiaobin Tang
Simultaneously optimizing electrical and thermal transport properties remains a major challenge for thermoelectric materials. In this work, high-entropy secondary phases (HE2P) were introduced into a Cu-doped PbTe matrix to improve the thermoelectric performance of n-type PbTe. Carbon-coated HE2P particles were incorporated into the PbTe matrix through vacuum melting and fast hot-pressing, resulting in a hierarchical microstructure with refined grains, heterointerfaces, and defect structures. The introduced HE2P effectively suppresses lattice thermal conductivity through enhanced phonon scattering induced by interfaces, lattice distortion, and mass fluctuation. Meanwhile, the heterogeneous interfaces introduced by the carbon-coated HE2P particles may also influence carrier transport behavior. As a result, the composite with 7% HE2P achieves a low lattice thermal conductivity of 0.39 W m −1 K −1 at 838 K and a peak ZT value of 1.38, together with an average ZT of 1.01 over 300–850 K. These results suggest that incorporating high-entropy secondary phases provides a feasible approach for improving the thermoelectric performance of PbTe-based materials.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Yongkang Han,Tiehu Li,Lizhe Li,Yanying Han,Jiahe Chen,Yanan Liu,Yuhui Liu,Alei Dang
The escalating heat flux in miniaturized electronics requires high-performance thermal interface materials (TIMs) for efficient thermal management. However, conventional polymer composites suffer from a persistent trade-off between thermal conductivity, filler loading and processability. Herein, we report a novel Ca 2+ -mediated assembly strategy to fabricate topologically optimized graphene fiber frameworks (GFFs) for polydimethylsiloxane (PDMS) composites. By precisely regulating the fusion degree, this approach transforms discrete fiber networks into interconnected skeletons, establishing continuous through-plane phonon transport channels while minimizing interfacial scattering. Remarkably, the produced GFF/PDMS composite achieves a superior through-plane thermal conductivity of 5.91 W m −1 K −1 at an ultralow filler loading of only 2.5 wt%, representing a ∼30-fold enhancement compared to pure PDMS. More importantly, due to the established vertical conduction pathways and excellent surface conformability, the contact thermal resistance of GFF2/PDMS (55.11 K mm 2 W −1 ) is reduced by one order of magnitude compared to commercial counterparts. Consequently, in real-time chip dissipation tests, the composite delivers exceptional cooling efficiency, yielding a substantial temperature reduction of 66.5 °C relative to the pure matrix. This work provides a scalable paradigm for constructing low-loading, high-efficiency thermal management materials via topological structure design.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
·
2026
·
IF 4.4
Hao-Yu Zhou,Ya-Yun Ma,Chao-Chen,Guo-Zhi Han
A novel hollow SiO₂@g-C₃N₄@AgBr photocatalyst was fabricated for efficient H₂O₂ production. • The Z -scheme heterojunction endow the catalyst with a narrow band gap of 1.25 eV and superior charge separation efficiency. • The catalyst exhibits a dual-channel pathway to achieve a high H₂O₂ yield up to 1392.84 μmol h −1 g −1 . Using PVP-modified polystyrene (PS) microspheres as a template, and tetraethyl orthosilicate (TEOS), melamine, AgNO₃, and KBr as precursors, a novel mesoporous hollow SiO₂@g-C₃N₄@AgBr ternary composite photocatalyst with a porous surface was readily prepared via a one-pot method. The composite structure was obtained by simple calcination without further chemical reduction. The structure and morphology of the catalyst were characterized by XRD, UV–Vis DRS, SEM, TEM, and XPS. The results revealed that the hollow SiO₂ microspheres provided a high specific surface area, and the band gap of the composite was narrowed to 1.25 eV, endowing the hollow composite with excellent broad-spectrum photocatalytic performance. The catalyst achieved efficient photocatalytic H₂O₂ production from water under ambient air, and the maximum productivity reached 1392.84 μmol·g −1 ·h −1 within 1 h with the aid of different sacrificial agents. Finally, the catalytic mechanism was investigated. The as-prepared catalyst exhibited a unique dual-channel pathway based on a Z -scheme heterojunction, which significantly boosted H₂O₂ production and environmental adaptability. Download: Download high-res image (65KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Zhengyun Xie,Like Ning,Farzad Seidi,Shicun Jin,Zhulan Liu,Chao Liu,Huining Xiao
Functionalized nanosilica is used to carry agrochemical IAA via disulfide bonds. • Under GSH environment, SiO 2 -S-S-IAA exhibits significant redox responsiveness. • The -SH on the surface of SiO 2 can form complexes with various heavy metal ions. • Dual-functional nanocarrier allows sustained IAA release and capture of metal ions. Owing to the low efficiency and lack of target specificity in the application of agrochemicals, e.g., plant growth regulators, the resulting environmental pollution and resource waste have raised enormous concerns over environments and human health. Herein, a redox-responsive nanosilica carrier (SiO 2 -S-S-IAA) was developed for efficient release of 3-indoleacetic acid (IAA), by functionalizing the surface of nanosilica with 3-mercaptopropyltrimethoxysilane (MPTMS), followed by the covalent coupling of IAA via redox-cleavable disulfide bonds. Under the high level of glutathione (GSH) in the plant microenvironment, IAA was released in a controlled way through disulfide bond cleavage, thus achieving redox response. In vitro controlled-release experiments confirmed that the release amount of IAA was significantly higher in the environment of 10 mM GSH, more than 10 folds at pH 5.5. Meanwhile, the thiol groups generated after release could form complexes with various heavy metal ions (Hg 2+ , As 3+ /As 5+ , Cd 2+ , Pb 2+ ), with the highest adsorption efficiency towards Hg 2 + up to 57.95%. More importantly, in planta experiments under cadmium stress have demonstrated that SiO 2 -S-S-IAA not only promoted rice seedling growth but also significantly reduced Cd 2+ accumulation in shoots, effectively inhibiting its transfer to edible parts. This work establishes a dual-functional nanocarrier platform that combines targeted agrochemical delivery with in situ heavy metal immobilization, offering a promising strategy for sustainable and precise crop protection. Download: Download high-res image (185KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子