JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Luyang Zuo,Rui Li,Qi Liu,Yabing Duan,Hongwei Wang,Huitao Fan,Bo Li,Liya Wang
Solar energy-assisted hydrogen production technology is an essential tool for exploring hydrogen energy. To date, semiconductors have been used as the primary photocatalyst to generate hydrogen via photocatalytic water splitting. However, the high photogenerated electron–hole recombination rate of semiconductor photocatalysts results in a low hydrogen production rate. Herein, the synergistic effect of Mo-ion doping and the incorporation of Ni-based Hofmann-type coordination polymer (Ni–Ni HCP) on the photocatalytic performance of ZnIn 2 S 4 (ZIS) is investigated. The hydrogen production rate of the prepared in-situ Mo doped ZnIn 2 S 4 wrapped Ni-Ni HCP (Ni–Ni HCP/Mo–ZIS) sample under visible-light irradiation is 26.7 mmol g −1 h −1 , which is 10 times that of pure ZIS. Hydrogen production rate test, microscopic characterization, and density functional theory calculation confirm that the proposed dual modulation approach (combined ion doping and heterogeneous structure construction) could effectively increase the photocatalytic efficiency of ZIS. The stability of prepared samples is also examined by four-cycle photocatalytic hydrogen production tests. The proposed integrated method opens a new route for advancing renewable energy technology towards a sustainable future.
研究领域:
材料科学
·
可再生能源
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NANOTECHNOLOGY
·
2023
·Vol. 34
·期 46
·465404
·
IF 3.5
Penghui Bai,Kai Lei,Juan Xie,Hu Wang,Xiaolan Kang,Xia Wang
This paper investigates the impact of Pd/Ni modification on the photocatalytic hydrogen production performance of SrTiO3 (STO). STO catalysts were synthesized using a hydrothermal method, and Pd/Ni modification was applied on the surface of STO through chemical deposition. Experimental results demonstrate that the hydrogen evolution rate of Pd/Ni-modified STO (Pd/Ni-STO) reaches 2232.14 μmol g−1 h−1. X-ray absorption fine structure spectroscopy analysis reveals substitutional doping of Ni with Ti and coordination of Pd with surface O. X-ray photoelectron spectroscopy analysis indicates the introduction of oxygen vacancies due to Pd/Ni doping. Density functional theory calculations suggest that Ni doping activates neighboring Ti atoms, leading to the formation of bimetallic catalytic sites composed of oxygen vacancies and Ti atoms, greatly enhancing the photocatalytic hydrogen evolution performance. This study not only provides an effective catalyst for photocatalytic applications but also offers insights into the underlying mechanism, which may stimulate the development of metal-doped catalytic materials and have implications for a range of other applications.
研究领域:
材料科学
·
能源科学
·
催化化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTAL GROWTH & DESIGN
·
2024
·
IF 3.2
Huiqin Ma,Zhuxiang Mao,Wen Liu,Yahao Zhao,Peng Liu,Difu Zhan,Qian Fu,Yizhong Huang,Changcun Han
ZnIn2S4 (ZIS) is an N-type direct bandgap semiconductor material with a visible light response, which exhibits excellent photocatalytic water-splitting performance. To enhance ZIS-based photocatalysts, heterojunction construction and cocatalyst loading methods have been explored extensively. In this research, a Co9S8/ZnIn2S4 (CS/ZIS) heterojunction was successfully synthesized via a solvothermal method, and then Ni(OH)2 nanoparticles were successfully loaded on CS/ZIS by photodeposition, yielding the Ni(OH)2/CS/ZIS photocatalyst. Our findings reveal tight coupling of ZIS nanosheets with the CS surface, establishing an effectively constructed heterojunction structure that enhances interface charge transfer and light absorption. The synergistic effect of CS and Ni(OH)2 significantly boosts the photocatalytic hydrogen production of ZIS composites. The optimum hydrogen production rate of CS/ZIS is 10.06 mmol·h–1·g–1 and that of Ni(OH)2/CS/ZIS reaches 12.92 mmol·h–1·g–1, a 11.9-fold increase over pure ZIS, with exceptional light stability. Furthermore, we discuss the photocatalytic reaction mechanism based on the experimental and characterization results. This work presents a novel approach to designing highly efficient photocatalysts using ZnIn2S4, aimed at enhancing the conversion of solar energy into chemical energy.
研究领域:
材料科学
·
能源化学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Yue Han,Changdi Wang,Ruiyang Zhao,Jishu Han,Lei Wang
In order to alleviate environmental pollution and energy crisis caused by the excessive use of fossil fuels, photocatalytic water splitting to produce hydrogen as an alternative fuel has attracted widespread attention. The construction of heterojunction photocatalyst is considered to be one of the effective ways to enhance the photocatalytic hydrogen production efficiency. In this study, Ni-doped CdSe was modified on the surface of hollow ZnSnO 3 double-shell nanocubes. The obtained Cd 0.9 Ni 0.1 Se/ZnSnO 3 possessed high photocatalytic activity under visible light irradiation. The photocatalytic hydrogen production rate could reach to 6458.0 μmol/g/h. The successful construction of hollow Cd 0.9 Ni 0.1 Se/ZnSnO 3 double-shell type-I heterojunction increased visible light absorption, shortened the charge transport distance, and inhibited the recombination of electron-hole pairs, thus enhancing the photocatalytic hydrogen production performance of Cd 0.9 Ni 0.1 Se/ZnSnO 3 . It provided the idea for promoting the design of solar to chemical energy conversion and the effective guidance for constructing a high-efficient and stable photocatalyst.
研究领域:
材料科学
·
环境科学
·
能源科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Guiliang Li,Yanmin Qi,Haibo Lin,Na Lu,Jiaping Chen,Jianqiang Wang,Qiu Han,Fu Liu
Lamellar membranes are attracting extensive attention for high throughput and precise molecules/ions sieve separation. However, the energy-consuming exfoliation and low yield of single-layer nanosheets restrict the massive production of membranes. Herein, we facilely fabricated 2D Ni-mediated metal-organic framework (Ni-MOF) membranes directly from multiply stacked nanosheets (MSNs) for both aqueous and organic molecular sieve separation. Multiply layered nanosheets were obtained from a high concentration dispersion via simple ultrasonic treatment. The morphology and chemistry of synthesized Ni-MOF nanosheets were characterized via scanning electron microscopy (SEM), N 2 adsorption-desorption, Fourier transform infrared spectra (FTIR), and X-ray photoelectron spectra (XPS). The thickness of Ni-MOF membranes could be well regulated by the volume of dispersion. The membrane exhibited high molecular rejection to 8GX (97.29%), EB (96.28%), CR (99.69%), and CBB (93.31%) in water, respectively and a stable perm-selectivity in continuous 24 h filtration. The lamellar membrane showed excellent pressure and pH (2–10) resistance. The membrane achieved rational permeance of various organic solvents mainly depending on viscosity and good rejection to MB (91.37%), BY (92.01%), and EB (96.90%) in isopropanol.
研究领域:
材料科学
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
SOLID STATE SCIENCES
·
2022
·
IF 3.752
Shijun Xu,Yi He,Siming Yan,Teng He,Hongjie Li,Xiao Guo,Yi Fan
Hydrogen energy is the most promising clean energy at present and hydrogen production by electrocatalytic water splitting is the frontier technology of alternative energy in the future. Herein, the Ni–Mo alloy supported with nickel foam (NF) was prepared by hydrogen reduction strategy at high temperature. The catalytic activity and stability of NiMo@NF-x catalyst (x stands for temperature) with multistage (sheet/particle) array structure were studied under different temperatures. The performance of the catalyst was evaluated by contact angle and related electrochemical characterization. It was found that the surface of NiMo@NF-550 catalyst prepared at 550 °C had superhydrophilic and superaerophobic properties, which contributed to the deactivation of bubbles from the surface of the electrode and improved the efficiency of the catalytic reaction. Moreover, the multi-stage array structure of sheet/particle will form a greater specific surface area than the plain sheet structure, offering more reaction sites. These results indicate that the self-supported superhydrophilic and superaerophobic Ni–Mo catalysts have excellent electrocatalytic hydrogen evolution ability.
研究领域:
材料科学
·
能源科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2020
·Vol. 13
·期 21
·4870
·
IF 3.057
Xiao Li,Jun Li,Ying Zhang,Peng Zhao,Ruyan Lei,Baige Yuan,Manman Xia
Ni(OH)2derived from an MOF template was synthesized as an electrode material for supercapacitors. The electrochemical performance of the electrode was adjusted by effectively regulating the morphology of Ni(OH)2. The evolution of electrochemical performance of the electrode with morphology of Ni(OH)2was highlighted in detail, based on which honeycomb-like Ni(OH)2was successfully synthesized, and endowed the electrode with outstanding electrochemical performance. For the three-electrode testing system, honeycomb-like Ni(OH)2exhibited a very high specific capacitance (1865 F·g−1at 1 A·g−1, 1550 F·g−1at 5 mV·s−1). Moreover, it also presented an excellent rate capability and cycling stability, due to 59.46 % of the initial value (1 A·g−1) being retained at 10 A·g−1, and 172% of initial value (first circle at 50 mV·s−1) being retained after 20,000 cycles. With respect to the assembled hybrid supercapacitor, honeycomb-like Ni(OH)2also displayed superior electrochemical performance, with a high energy density (83.9 Wh·kg−1at a power density of 374.8 W·kg−1). The outstanding electrochemical performance of Ni(OH)2should be attributed to its unique honeycomb-like structure, with a very high specific surface area, which greatly accelerates the transformation and diffusion of active ions.Keywords:honeycomb-like structure;Ni-MOF;Ni(OH)2;electrode material;supercapacitor
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2020
·Vol. 167
·期 6
·066515
·
IF 3.721
Wenjing Liu,Zhiyuan Wu,Pei Dong,Feifei Lin,Meng Zang,Shuai Qiao,Yingying Gu,Jinqiang Zhang,Shuaijun Wang,Chaocheng Zhao
Developing effective and economical materials for emerging electrochemical remediation of persistent organic pollutants has attracted significant research interest. In this study, a heteromorphic self-standing nickel foam@Ni(OH)2/MnO2 (NF@Ni(OH)2/MnO2) electrode was synthesized by a simple solvothermal method and employed for the remediation of persistent organic pollutants. The prepared NF@Ni(OH)2/MnO2 electrode exhibited better performance for the electro-catalytic degradation of tetracycline (TC) than that of the NF and NF@Ni(OH)2. In optimized conditions, the NF@Ni(OH)2/MnO2 electrode exhibited the highest TC degradation efficiency (90%) and total organic carbon(TOC) removal (59.02%) among the prepared electrodes. In addition, a higher mineralization current efficiency (MCE) and lower energy consumption (EC) for the NF@Ni(OH)2/MnO2 electrode was achieved. The enhancement occurs primarily because the active MnO2 anchored to the porous and highly conductive Ni foam substrate surface boosts the electron transfer and the generation of hydroxyl radicals, as proved by a free radical trapping experiment and fluorescence spectrum analysis. This study suggests the possibility of a new paradigm in designing effective and practical electro-Fenton electrodes for environmental remediation.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2019
·
IF 14.229
Qiao Han,Mooeez Ur Rehman,Junhu Wang,Alexandre Rykov,Oliver Y. Gutiérrez,Yujun Zhao,Shengping Wang,Xinbin Ma,Johannes A. Lercher
The catalytic hydrodeoxygenation (HDO) of lignin-derived phenolic compounds is a critical step in the upgrading of bio-oil. Here, bimetallic Ni-Fe nanoparticles supported on mesoporous carbon spheres (MCSs) were fabricated and applied in HDO of phenol. In comparison with monometallic Ni and Fe catalysts, the bimetallic Ni-Fe catalyst exhibited better performance for phenol HDO due to the formation of Ni-Fe alloy phase identified by X-ray powder diffraction (XRD) and Mössbauer spectroscopy techniques. Among several explored ratios, the catalysts with Ni/Fe ratio of 3/1 presented the highest cyclohexane yield. The reaction occurred in two consecutive steps: the hydrogenation of phenol to cyclohexanol and the further hydrogenolysis of cyclohexanol to cyclohexane. Kinetic studies showed that the hydrogenolysis of cyclohexanol controlled the overall reaction rate of phenol HDO due to the lower reaction rate of this step. Indeed, the turnover frequency (TOF) values of cyclohexanol normalized by surface metallic Ni sites exhibited a linear correlation with Ni-Fe alloy sites. The alloying of iron in the bimetallic Ni-Fe catalysts significantly enhanced the adsorption strength of cyclohexanol, which is the reason of the high activity of the Ni-Fe alloy particles. Thus, Fe-containing sites adsorb the hydroxyl species while Ni sites perform the H 2 activation, their synergistic effect plays a key role in phenol HDO process.
研究领域:
催化化学
·
材料科学
·
能源化学
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2025
·
IF 4.9
Huan Wang,Shu-Wei Yin,Jianchuan Liu,Weitao Wang,Zhen-Hong He,Kuan Wang,Zhi-Hao Zhao,Zhao-Tie Liu
Ni, especially Ni single atom catalysts (SACs) are the most promising electrocatalyst in the reduction of CO 2 to CO. However, the high energy barrier for the formation of *COOH on Ni SA sites leads to a high overpotential for CO 2 RR, which severely hinders the CO production efficiency. How the coupling effect of Ni SAs and Ni nanoparticles (NPs) sites improve the performance of Ni-based electrocatalysts is interesting to be investigated. Herein, theoretical calculations revealed that the synergy of Ni SAs and Ni NPs could efficiently lower the energy barrier of the *COOH formation via promoting the H 2 O dissociation process to accelerate the *H supply for CO 2 protonation as well as promote the CO 2 adsorption and CO desorption, thus improving catalytic activity. Based on the theoretical study, Ni-N 4 SA coupled with Ni nanoparticles supported on nitrogen-doped carbon nanotubes (Ni-N 4 Ni NP /NCNT) was designed. As electrocatalyst, the Ni-N 4 Ni NP /NCNT showed an ultralow onset overpotential of 60 mV for CO 2 RR-to-CO, and achieves a FE CO of ∼99 % from an overpotential of as low as 160 mV, outperforming state-of-the-art Ni SACs. This work not only sheds new light for the rational synthesis of Ni-based catalysts with both Ni SAs and Ni NPs sites to achieve efficient CO 2 RR to CO, but also offers an in-depth insight for the origin of efficient performance of cooperative Ni SA -Ni NP catalysts.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·
IF 7.139
Xu Yang,Rui Qiu,Ming-Jian Lan,Gang Chen,Wei Xu,Yu Shen
Designing the efficient, low-cost and stable electrocatalyst is of great significance for storage and conversion of the renewable energy to hydrogen. Herein, the binder-free Ni–Fe–S electrocatalysts were directly electrodeposited on Ni foam, which exhibited the excellent hydrogen evolution reaction performance with the overpotential of 51.4 mV at the current density of 10 mA cm −2 . Based on the analysis and results of as-synthesized Ni, Ni–Fe and Ni–S, the boosted electrocatalytic activity can be attributed to the composite effect between Ni and the introduced Fe and S. Additionally, the Ni–Fe–S electrocatalysts also displayed the low cell voltage (1.59 V at 10 mA cm −2 ), remarkable durability and high Faraday efficiency in overall water electrocatalysis . Moreover, the water electrolysis device with Ni–Fe–S bi-electrodes can be driven by a small wind power generation and producing 4 mL H 2 in 39 min, indicating the prepared Ni–Fe–S electrocatalyst has the great potentials in producing hydrogen via renewable energy.
研究领域:
材料科学
·
能源转换与存储
✓ 已验证
DOI
高影响因子
Catalysts
·
2023
·Vol. 13
·期 6
·924
·
IF 3.9
Li Xu,Yuxuan Dong,Wei Xu,Wen Zhang
Preparing high-performance electrocatalysts for oxygen evolution reaction (OER)s with high durability for seawater electrolysis is of great significance. Herein, reported a one-step solution-immersion synthesis strategy to prepare a (Ni/Fe/Mo)OOH catalyst on a nickel foam substrate that can be accomplished in 5 min under ambient temperature and pressure. The unique cluster morphology of the catalyst on the surface of electrodes effectively increases the number of active sites, and the presence of Mo, Ni, and Fe in the catalyst enhances the activity of the OER. In the electrolyte solution (1 mol/L NaOH), the electrode exhibited low OER overpotentials of 265 mV, 286 mV, and 332 mV at currents of 100 mA·cm−2, 400 mA·cm−2, and 1000 mA·cm−2, respectively. This electrode also demonstrated excellent performance in seawater splitting, and the overpotentials at currents of 100 mA·cm−2, 400 mA·cm−2, and 1000 mA·cm−2in alkaline seawater environments were 330 mV, 416 mV, and 514 mV, respectively. In the 72 h durability test, the voltage increase was within 10 mV, exhibiting the excellent durability of the (Ni/Fe/Mo)OOH electrocatalyst. Therefore, the electrode developed here shows potential in the application of seawater electrolysis for hydrogen generation.Keywords:oxygen evolution reaction;(Ni/Fe/Mo)OOH catalyst;ultrafast and facile synthesis;alkaline seawater electrolysis
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）