FOOD CHEMISTRY
·
2019
·
IF 5.399
Meng Shi,Dan-Yang Ying,Mya Myintzu Hlaing,Jian-Hui Ye,Luz Sanguansri,Mary Ann Augustin
Novel delivery systems for epigallocatechin gallate (EGCG) were developed using broccoli by-products and their fractions as carriers. Puree and pomace from broccoli by-products had higher adsorption capacities for EGCG than juice at 25 °C (43.20 mg g −1 , 39.47 mg g −1 and 25.22 mg g −1 dry weight for pomace, puree and juice respectively). Chemical sorption is the rate-controlling step for EGCG-broccoli interactions. Langmuir and Freundlich models well described the adsorption of EGCG onto puree and pomace. FTIR results indicated that EGCG-puree had stronger interaction than EGCG-pomace. When the same level of EGCG (∼26 mg) was added to different matrices, more EGCG (∼20%) was recovered from the in vitro digestion system of EGCG-loaded puree than from the EGCG-loaded pomace (14%) and neat EGCG (9%). The antioxidant capacity of the whole digesta was positively correlated with the EGCG levels. Broccoli by-products are promising carriers for delivering and stabilizing EGCG through gastrointestinal digestion.
研究领域:
食品科学
·
营养学
·
天然产物化学
·
药物递送
·
生物利用度
·
分子互作
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2012
·Vol. 378
·期 1
·30-35
·
IF 3.07
Shangkun Li,Xiaofeng Lu,Xiang Li,Yanpeng Xue,Chengcheng Zhang,Junyu Lei,Ce Wang
A reactive-template vapor phase polymerization method for the preparation of bamboo-like polypyrrole (PPy) nanotubes has been successfully demonstrated in this paper. Herein, electrospun V 2 O 5 nanofibers were chosen as templates to deposit PPy, which served as the oxidants as well. This method can provide the fabrication of PPy nanostructures more easily than conventional routes due to its independence of removing template, which is usually a complex and tedious experimental process. The application of bamboo-like PPy nanotubes for Cr(VI) ions removal in aqueous solution has been explored. The resulting bamboo-like PPy nanotubes exhibited much higher adsorption performance than traditional PPy nanoparticles.
研究领域:
环境科学
·
纳米材料
·
高分子化学
·
环境污染治理
·
吸附技术
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2018
·
IF 6.735
Jing Zhou,Dapeng Li,Shutong Chen,Yao Xu,Xue Geng,Chaoran Guo,Yong Huang
The immobilization of sedimentary phosphorus (P) by capping sediments with amended calcium peroxide material (ACPM) and CaO 2 was investigated, the sediments and overlying water from a black-odor river. Under the capping with ACPM and CaO 2 , the pH and dissolved oxygen (DO) in the overlying water were higher than in the control. This contributed to the more loss of external P under the ACPM (the phosphate sorption was fitted well by the Langmuir equation, the maximum P sorption capacity up to 29.28 mg P g −1 ). Additionally, ACPM improves the decrease of the reduction materials (e.g., NH 4 + -N, Fe 2+ ) in the pore water compared to that associated with CaO 2 , resulting in a less obvious dissolved inorganic P (DIP) in the pore water, but the accumulation of DIP in the pore water with CaO 2 suggested an explosive release once the micro-environment conditions encounters adverse conditions. The sharp reduction of Fe/Al-P and Res-P contributes to the increase of DIP in the pore water, with a release of up to 390.60 mg P kg −1 DW (dry weight), whereas the value is only 62.55 mg P kg −1 DW when capped with ACPM. Correspondingly, the percentage of the bioavailable P to Tot-P decreases rapidly from 17.27% (control, 0–2 cm) to 7.21% (ACPM, 0–2 cm) and 10.57% (CaO 2 , 0–2 cm), indicating the obvious P immobilization. The implication is that the application of CaO 2 is not suitable for direct use, while the combination with other materials (e.g., WPS) is a better choice.
研究领域:
环境科学
·
水体修复
·
环境化学
·
污染控制
·
沉积物管理
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Fangyuan Zhang,Mei Hong,Jing Bai,Zhi Liu,Aiyuan Jia,Zhisheng Liu,Can Shi,Yangxue Li
Levofloxacin (LEV) infiltrated in groundwater has threatened the safety of drinking water . For in-situ remediation of LEV-contaminated groundwater, there exists a main challenge of exploiting proper high efficient backfill medium in utilizing charming permeable reactive barriers (PRBs). Herein, three porous shapeable three-component hydrogen-bonded covalent organic aerogels (H C OA-1, H C OA-2 and H C OA-3) were fabricated based on a multiple-linking-site strategy to evaluate for adsorptive removal of LEV. The three H C OAs exhibited satisfactory performance in LEV adsorption that could integrate high adsorption capacity, good antiion interference, excellent recyclability and wide pH tolerance. The different regularity of kinetics and isotherms of three H C OAs signified that electrostatic effect, pore preservation, hydrogen bonding probably govern the adsorption process in combination, coupling with π-π electron-donor-acceptor (EDA), dipole-dipole and hydrophobic-hydrophobic interaction besides. In addition, the response surface methodology (RSM) was employed for studying the single and synergetic effects of selected variables and optimizing operation conditions. Furthermore, a laboratory PRB column packed with processable H C OA-2 was set up to investigate the LEV removal, and the breakthrough data was explained by Adams-Bohart, Thomas, BDST and Yoon-Nelson models. We believe could hopefully bring H C OAs into the real in-situ remediation of such challenging and persistent LEV-polluted groundwater with further massive-scale efficiently.
研究领域:
环境科学
·
材料科学
·
水污染控制
·
环境功能材料
·
污染物吸附
·
可持续修复技术
✓ 已验证
DOI
高影响因子
Plasma Processes and Polymers
·
2011
·Vol. 8
·期 10
·923-931
·
IF 1.643
Zhihong Zhang,Jun Dou,Fufeng Yan,Xianjun Zheng,Xili Li,Shaoming Fang
The present work describes the fabrication, characterization, and optimization of plasma polymerized pyrrole films, PPpy, prepared by continuous wave for application as the adhesion layers of bovine serum albumin (BSA). Plasma conditions used throughout the work produced significant differences in the chemical, physical, and electrochemical properties of the resultant PPpy films. Structural analysis and property characterizations of PPpy were carried out using Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electrochemical workstation. Surface plasmon resonance spectroscopy was used to investigate the adsorption kinetics of BSA onto PPpy films. Moreover, when immersed in solutions or after BSA adsorption, the differences of electron transfer at the interfaces between the PPpy and the electrolyte solutions were determined by electro impedance spectroscopy. While there is a clear dependence of the protein adsorption affinity on the plasma polymerization condition employed during the film preparation. The relationship between film structure, electrochemical properties, polymer stability in aqueous buffer, and protein binding affinities are discussed.
研究领域:
生物材料
·
表面科学
·
生物医学工程
·
分子生物学
·
分析化学
·
生物传感器
✓ 已验证
DOI
高影响因子
DESALINATION
·
2023
·
IF 9.9
Xudong Bu,Yurong Zhang,Haiqing Guo,Sheng Wang,Xueyan Du
The ion removal capacity of carbon based capacitive deionization (CDI) is limited by the double-layer mechanism. Replacing one electrode of the conventional carbon-based symmetric CDI with a battery-like ion insertion material to obtain hybrid capacitive deionization (HCDI) can significantly improve the adsorption capacity . Various ion insertion materials have been adopted for HCDI, however, how to optimize the performance of the HCDI system by matching the two electrodes with different ions removal mechanism remains challenging. In this work, a HCDI desalination cell was demonstrated by using NaTi 2 (PO 4 ) 3 /reduced graphene oxide composites (NTP-rGO-700) as the cathode and activated carbon (AC) as the anode. Based on the mass balance strategy of electrodes and the electrochemical behavior of hybrid capacitors with different AC:NTP-rGO-700 mass ratios, the HCDI desalination cell was assembled with the optimal AC:NTP-rGO-700 mass ratio of 2:1. At an operating voltage of 1.6 V and a current density of 125 mA·g −1 , the specific adsorption capacity (SAC) of the HCDI cell can reach 51 mg·g −1 with an average salt adsorption rate (ASAR) of 2 mg·g −1 ·min −1 , and the energy consumption (E m ) is 136.53 kJ·mol −1 . This work provides an efficient approach for developing high performance HCDI cell.
研究领域:
环境科学
·
电化学
·
材料科学
·
水处理技术
·
能源存储
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Xiaoyu Zhao,Guangyu Li,Minghui Feng,Yanfei Wang
Compared to traditional extraction of lithium using solar evaporation, the electrochemical extraction is advantageous in many aspects, including elevated efficiency, superior selectivity, and low environmental pollution. In this study, LiNi 0·038 Mo 0·012 Mn 1·95 O 4 (LNMMO) with good lattice structure and nano morphology was successfully prepared and confirmed by XRD (X-ray diffraction), SEM-Mapping (scanning electron microscope mapping), SEM (scanning electron microscope), and EDX (Energy-dispersive X-ray spectroscopy) analyses. The pairing of LNMMO with activated carbon (AC) yielded obvious cost-effective and environmentally friendly composite when compared to conventional Noble metals used for battery anodes, such as Ag and Pt. A hybrid supercapacitor was assembled using delithiated LNMMO cathode (NMMO) and AC anode to form NMMO/AC. The cell showed high capacity, high rate performance, and excellent cyclic stability. A continuous flow NMMO/AC hybrid supercapacitor (CF-NMMO/AC) was developed for selective capture of Li + in aqueous solution by combining NMMO/AC hybrid supercapacitor with self-designed continuous flow control system. The device delivered high Li + extraction efficiencies reaching 14.4 mg/g per one cycle in simulated brine by consuming only 7.91 W h/mol Li + . The overall process produced 97.2％ Li + in simulated brine at optimized operating conditions. Overall, CF-NMMO/AC system provided higher efficiency, superior selectivity, and moderate energy utilization for Li + recovery from brine.
研究领域:
电化学
·
环境科学
·
材料科学
·
能源工程
·
分离科学
·
可持续技术
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Shujuan Lian,Xiaoshuang Shi,Mingyi Lu,Mengdan Zhang,Xiaohuan Dong,Xu Li,Quan Feng,Rongbo Guo
Due to the persistence in residue and the emission to environment, antibiotics have become the emerging contaminants. Tetracyclines, as the largest amount of antibiotics in the breeding industry, were investigated in this study. For eliminating the tetracyclines, anaerobic culture was enriched from livestock waste after four generations and FeOn(OH)m modified oyster shell powders (OSPs) were amended into the enrichment culture as auxiliary method. Tetracycline and oxytetracycline were selected as the model compounds. The adsorption models (Langmuir and Freundlich isotherms) of tetracycline and microbes on OSPs were simulated respectively. With the addition of FeOn(OH)m modified OSPs, the transformation efficiency of oxytetracycline achieved 81.5% after 22 days’ incubation, approximately 1.85 times higher than the 4th generation (G-IV) enrichment culture without modified OSPs. Dehydration, demethylation, dehydroxylation and decarboxylation took place under anaerobic condition, inferred from the detected metabolites transformed from oxytetracycline. Genus Methanosarcina and two operational taxonomic units (OTUs) assigned to order Clostridiales , showed an increasing trend on abundance, indicating the contribution to transformation of oxytetracycline. Therefore, the FeOn(OH)m modified OSPs and enrichment culture can accelerate the transformation of oxytetracycline simultaneously, indicating a promising utilization not only for waste water system but also for antibiotic contaminated biomass treatment.
研究领域:
环境微生物学
·
污染物生物降解
·
环境工程
·
抗生素去除
·
吸附材料
·
厌氧消化
·
药物代谢
✓ 已验证
DOI
高影响因子
Journal of the Taiwan Institute of Chemical Engineers
·
2016
·
IF 2.848
Zhanjing Guo,Xiongmin Liu,Hongmiao Huang,Lingfeng Jiang
The strong acidic cationic exchange fiber (SACEF) was used to adsorb yohimbine from alcoholic solution. Batch experiments were performed to examine the effects of adsorbent dosage, solution pH and temperature in the adsorption process. The thermodynamics and kinetics of adsorption were also analyzed. The optimum yohimbine adsorption onto the SACEF was found at pH = 5 of solution and equilibrium could be attained within 20 min. The equilibrium adsorption data were preferably modeled with the Freundlich isotherm model and the thermodynamic parameters were calculated to be: 11.99 kJ/mol < Δ H < 13.72 kJ/mol, −21.17 kJ/mol < Δ G < −17.87 kJ/mol and 63.18 J/mol K < Δ S < 65.60 J/mol K. The results demonstrated that the adsorption was an endothermic, spontaneous and feasible process of physisorption . Meanwhile, yohimbine adsorption on SACEF fitted well to the pseudo-second-order kinetic model and the adsorption rate was limited by film diffusion. The activation energy Ea was calculated to be 14.39 kJ/mol. Furthermore, the surface morphologies of the SACEF before and after yohimbine adsorption were analyzed by SEM and the adsorption mechanism was discussed by FTIR analysis. SACEF could effectively adsorb yohimbine from alcoholic solution and could be used repeatedly for more than five cycles.
研究领域:
药物化学
·
药剂学
·
物理化学
·
分离科学
·
吸附科学
·
天然产物提取
·
药物代谢
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Weiyi Zhang,Haozhen Zhang,Xinglian Xu,Xue Zhao
The oil polarity was hypothesized to significantly influence the microscopic conformation of interfacial myofibrillar protein (MP) and thus the mesoscopic interfacial rheology of MP film , which ultimately tuned the macroscopic stability of MP-stabilized emulsions. In this research, the inner mechanism was revealed hierarchically based on emulsions multi-scale properties, by a combination of in vitro interfacial concentration measurement, dynamic interfacial tension measurement and interfacial dilatational rheology (highlighting Lissajous plots). Then, the above conclusion was verified through in silico molecular dynamic simulation. At macroscopic level, the light scattering results showed that emulsion prepared with higher polarity oil exhibited higher physical stability. This could be explained from the mesoscopic perspective that: (1) the adsorption dynamics of MP was faster (though lower diffusion rate, but higher penetration and rearrangement rate) on the higher polarity interface, which decreased interfacial tension more efficiently; (2) adsorption ratio, surface load and desorption ratio indicated that ‘multilayer interfacial film’ was formed by loosely-bound MP on the lower polarity interface, which decreased the effective interfacial coverage to impair emulsions stability; (3) Lissajous plots showed that interfacial structure with higher stability against large deformation was formed on the higher polarity oil interface. Finally, the microscopic molecular mechanism for explaining the above findings was revealed by in silico molecular dynamic simulation: though MP was less unfolded on the higher polarity interface leading to weaker intermolecular hydrophobic interactions, this compact molecular structure with stronger intramolecular rigidity predominantly contributed to steadier interfacial film structure. This multi-scale study provides a deep insight into the inner relationship between oil polarity and emulsions stability.
研究领域:
食品科学
·
胶体与界面化学
·
蛋白质构象
·
软物质物理
·
分子模拟
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Xin Guan,Huijie Pei,Xiaoyu Chen,Chen Chang,Siyuan Shao,Yu-Mo Zhang,Xingping Zhou,Hui Nie,Xiaolin Xie
The adsorption-catalysis synergy for accelerated conversion of polysulfides is critical toward the electrochemical stability of lithium-sulfur battery (LSB). Herein, a non-metallic polymer network with anion receptor units, trifluoromethanesulfonyl (CF 3 SO 2 -) substituted aza-ether, was in-situ integrated on PE separator, working as an efficient host for anchoring lithium thiophosphates (LPS) as redox mediators and polysulfides through Lewis acid-base interaction. The anchored LPS on the modified PE separator displayed a robust chemical adsorption ability towards polysulfides through the formation of S S bond. Meanwhile, LPS decreased the energy barrier of Li 2 S nucleation and promoted redox reaction kinetics. The battery with LPS decorated separator revealed a long cycling lifespan with a per cycle decay of 0.056 % after 600 cycles, and a competitive initial capacity of 889.1 mAh/g when the of sulfur cathode increased to 3 mg cm −2 . This work developed a new design strategy to promote the utilization of lithium phosphorus sulfide compounds in LSB.
研究领域:
电化学
·
能源材料
·
纳米材料
·
界面化学
·
储能技术
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2013
·
IF 2.108
Pei Zhang,Hui Wang,Xia Liu,Xuefeng Shi,Jian Zhang,Guang Yang,Keji Sun,Jinben Wang
The dynamic surface tension and dilational viscoelasticity properties of amphiphilic polyamidoamine (PAMAM) dendrimers were investigated to probe the hydrophobic chain effect on the interfacial properties and the demulsification behaviors. The values of dynamic parameters n and t * representing diffusion speed of the molecules obtained according to the Rosen equation decreased with the increasing of bulk concentration. Taking the hydrophobic effect into consideration, the t * values decreased and n values increased with the increase of alkyl chain length, suggesting easier adsorption and faster diffusion for longer hydrophobic chain which was opposite to the tendency of traditional surfactants. Further dilational viscoelasticity studies demonstrated that the properties referring to adsorption and exchange-diffusion were probably affected by the aggregates conformation at the interface. Subsequently, from the demulsification experiments a conclusion can be drawn that the amphiphilic dendrimers with branched dendritic structure possesses superior properties of breaking W/O crude oil emulsions, showing a certain correlation to the dilational viscoelasticity properties.
研究领域:
胶体与界面化学
·
石油化学
·
高分子科学
·
流变学
·
表面活性剂化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）