ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Na Zhang,Yu Liu,Jianhua Yang,Shuming Zhang,Shiyang He
The Si-TiO 2 based composites with a nanosized multi-sphere structure have been developed as novel anode for lithium ion cells . The Si spheres are highly embedded within the titanium dioxide nanoparticles via a hydrothermal synthesis route. The as-proposed sphere-stack like morphology achieves a superior cycling stability for lithium storage. The existence of TiO 2 is in favor for the mechanical stability of Si during charge-discharge and conversely reduces the obtained capacity of the composite. Furthermore, the Si/TiO 2 composite is coated by pyrolysized carbon. The reversible discharge capacity of the Si/TiO 2 /C composite reaches to 976 mAh g −1 after 50 cycles. Carbon coating is beneficial for the rate capability of the Si/TiO 2 based composite.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机非金属材料
✓ 已验证
DOI
高影响因子
Results in Physics
·
2020
·
IF 4.019
Zhengwei Xiong,Jiang Yang,Zhipeng Gao,Qiang Yang,Deli Shi
As a typical supercapacitor electrode material, the reported Mo-N compounds mostly own one part of outstanding electrochemical properties (specific capacitance (C sp ), voltage window and cycling stability), and the well integration with three aspects was rare. Here using a novel MoO 3 precursor with ultra-long nanobelts (NBs) and stable orthorhombic crystal structure, we prepared unique Mo 3 N 2 NBs, which inherited the morphology and structure of the precursor greatly. Compared with other Mo-N compounds, the Mo 3 N 2 NBs both possessed the high C sp (220.3 F/g at 0.4 A/g), great cycling stability (98.3% C sp retention after 1500 cycles) and wide voltage window (0.95 V) due to the improved morphology, stable structure and excellent conductivity.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
ORGANIC ELECTRONICS
·
2019
·
IF 3.495
Xiangli Gao,Gaoyi Han,Yunzhen Chang,Ying Zhang,Honggang Li
To enhance the reduced graphene oxide hydrogels' capacitive performance, many modifiers are used to add doped element into the materials and improve the structure. The isomers of aminophenol which contain amino and hydroxyl groups on the benzene ring are employed as structure regulator and modifier to synthesize high-performance reduced graphene oxide hydrogels. The influences of preparation conditions including ratios of graphene oxide to aminophenol isomers, temperature, reaction times on the samples’ structure and properties have been investigated. The results show that the oligomer of o-aminophenol is formed on reduced graphene oxide sheets while the molecules of p, m-aminophenol are bound to the sheets; and that the hydrogel prepared in the presence of p-aminophenol has larger specific surface area, total pore volume , specific capacitance and good rate capability (74.0% of 427.0 F g −1 retains at 100 mV s −1 ) than other. The cells assembled by the optimized hydrogels exhibit the energy density of 14.07 Wh kg −1 at power density of 124.3 W kg −1 , and 4.96 Wh kg −1 at 6.78 kW kg −1 . Furthermore, 92.2% of initial capacitance can be retained after 20,000 cycles for the cells assembled by the optimal hydrogel. This kind of material may be found its use in energy storage field.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
高分子化学
·
表面科学
✓ 已验证
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2018
·
IF 2.21
Fei Xu,Hongtao Wang,Mengyi Wu,Jiangsai Nan,Ting Li,Shun-an Cao
Redox-active organic materials are potential cathode materials for material-sustainable and environment-friendly Li-ion batteries. As is one of the most prominent features for organic compounds, isomerism has a significant influence on their properties. Herein, we synthesize two isomeric pairs of poly(anthraquinonyl imide)s ( PAQI s) by a simple one-pot reaction, and investigate their electrochemical properties as Li-ion battery cathodes by cyclic voltammogram and galvanostatic discharge/charge cycling. The PAQI materials exhibit a high reversible capacity of 202 mAh g −1 and a stable cyclability with 80% capacity retention over 200 cycles, and a remarkable rate performance, suggesting a potential feasibility of these organic cathode materials for high-capacity Li-ion batteries. The discharge/charge potentials of these PAQI s are slightly lower than the monomers . A further comparison of these four PAQI s indicates the isomerism plays a significant role in the electrochemical performance of these organic electrode materials .
研究领域:
电化学
·
材料科学
·
能源存储
·
有机电极材料
·
锂离子电池
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Hedong Chen,Zhoulu Wang,Xianhua Hou,Lijun Fu,Shaofeng Wang,Xiaoqiao Hu,Haiqing Qin,Yuping Wu,Qiang Ru,Xiang Liu,Shejun Hu
Carbon-coated core-shell structure artificial graphite@plasma nano-silicon@carbon (AG@PNSi@C) composite, applying as lithium ion battery anode material , has been prepared via spray drying method. The plasma nano-silicon (<100 nm), which contained amorphous silicon , was synthesized by radio frequency induction plasma system with the high temperatures processing capability and high quench rates. The artificial graphite in the composite acts as the core which supports the particle and provides electroconductivity , while PNSi attached on the surface of the core, enhances the specific capacity of the composite. The as prepared composite shows superior performance as anode in lithium-ion batteries, regarding to the initial Coulombic efficiency and cycle life. The initial Coulombic efficiency of AG@PNSi@C electrode is 81.0% with a discharge capacity of 553 mAh g −1 and a recharge capacity of 448 mAh g −1 . During cycling, AG@PNSi@C exhibits excellent performance with a very low capacity fading that the discharge capacity maintains 498.2 mAh g −1 and 449.4 mAh g −1 after 250 cycles and 500 cycles. AG@PNSi@C also shows enhanced resistance against high current density . Besides the remarkable electrochemical performances , the facile and mass-producible synthesis process makes the AG@PNSi@C composite very promising for its application in lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2022
·
IF 13.599
Xin Wu,Xingyu Xiong,Bin Yuan,Jun Liu,Renzong Hu
A good cycling stability is a prerequisite for the application of metal-based materials in lithium-ion batteries (LIBs). However, an abnormal increase in capacity is often observed, which has rarely been focused on in many studies. In our SnSe-Mo-C composite anode, a high reversible capacity of 737.4 mAh g −1 remained after 5000 cycles at 5 A g −1 between 0.01 and 3.0 V versus Li/Li + . However, a continuous capacity increase occurred in the initial cycles, with 1086.9 mAh g −1 after 1000 cycles and 1216.9 mAh g −1 after 1500 cycles, respectively. Further studies revealed that the electrolyte decomposed at high potentials (2.5–3.0 V) and provided additional capacities. The cut-off voltage and electrolyte filling were controlled, which eliminated the impact of electrolyte decomposition, prevented rapid capacity decay, and provided a stable cycling performance for SnSe-Mo-C anodes in LIBs. This work shows that the composite anode is promising for lithium storage and the findings provide new insights into understanding and controlling the phenomenon of capacity increase with cycling in metal-based anode materials.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·Vol. 48
·期 17
·7911-7920
·
IF 2.7
Pengchao Liang,Yuanchao Li,Xiangzhen Xiao,Shumin Fan,Jingjing Ma,Jingjie Liu,Yongqiang Dong,Yuhang Zong,Guangri Xu,Li Yang
Although they possess a high working voltage and environmental compatibility, and are low in cost with abundant resources, the poor cycling performance and rapid capacity attenuation of LiMn2O4 cathodes at high temperature restrict their extensive application. In this study, LiMn2O4 materials are synthesized by a simple rheology-assisted solid-phase method using citric acid as an additive. The citric acid improves the uniformity of the mixed raw materials, resulting in a reduction in particle agglomeration. Consequently, the synthesized LiMn2O4 shows an initial capacity of 117.4 mA h g−1 with a capacity retention of 79.50% at 2C after 300 cycles and 54.78% of the initial discharge capacity at 20C. This work provides a strategy for modifying multicomponent transition metal oxides for advanced lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机固体化学
·
电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2015
·
IF 6.217
Zhantao Liu,Xusong Qin,Hui Xu,Guohua Chen
In this study, a one-pot sintering process incorporating sol–gel preparation route and in-situ carbon coating was proposed for the synthesis of carbon-coated nanosized LiTi 2 (PO 4 ) 3 . Experimental results show that the prepared LiTi 2 (PO 4 ) 3 particles are of high crystallinity and well-coated by turbostratic carbon. Attributed to nanosized particles and enhanced conductivity provided by turbostratic carbon coating, the carbon-coated LiTi 2 (PO 4 ) 3 showed high rate performance and good cycling life in aqueous electrolyte. Particularly, the carbon-coated LiTi 2 (PO 4 ) 3 exhibited initial specific capacities of 103 and 89 mAh g −1 , and retained 80.6% and 97% of the initial capacities after 120 cycles at 1C and 10C in aqueous electrolyte, respectively. The high rate performance and good cycling life of carbon-coated LiTi 2 (PO 4 ) 3 in aqueous electrolyte reveal its potential as negative electrode in aqueous lithium-ion batteries for electric vehicles and industrial-scale energy storage systems .
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米技术
·
无机化学
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2019
·
IF 3.413
Shuzhen Yang,Yanfang Huang,Shengpeng Su,Guihong Han,Jiongtian Liu
A hybrid water-soluble humics-based binder (humics/sodium carboxymethyl cellulose (CMC)) was studied to enhance the electrochemical performance of a Li-ion battery cathode (LiFePO 4 ) in this work. Molecular dynamics simulations of binder active fractions with related materials (LiFePO 4 and Al) were performed to explore the binding mechanisms. Humics serve to connect the active material and provide a conducting bridge in the cathode. To improve the adhesion between the particles and current collector, CMC is added as an auxiliary fraction with a mass ratio of humics to CMC of 3:1. The scanning electron microscope results indicate that the morphology of the electrode with the hybrid humics/CMC binder is more uniform than that of electrodes with conventional polyvinylidene fluoride and CMC binders. The electrochemical performance and cycling stability of the cathode materials are obviously enhanced. The reversible specific capacity can reach 152.3 mAh g −1 at 0.5 °C after 100 cycles. The rate capability is greatly improved, with a specific capacity as high as 105 mAh g −1 at 8 °C. The humics/CMC composite can be regarded as a novel, environmentally friendly and high-efficiency binder for application in Li-ion batteries.
研究领域:
电化学
·
材料科学
·
能源存储
·
纳米材料
·
可持续能源技术
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2020
·
IF 6.215
Yuexiu Du,Chongwu Liu,Yunzhao Liu,Qi Han,Xiaowei Chi,Yu Liu
Rechargeable metal batteries are desirable for next-generation high specific energy electrochemical energy storage systems . However, low coulombic efficiency and severe dendrite growth during the stripping/plating of metals (e.g. Li, Na, Zn and etc.) considerably hinder their practical applications. To address the above issues, in this work, a facile, versatile, and scalable approach by means of spray depositing carbon fiber micron film (CFMF) onto metals is developed. The porous, uniform, and highly conductive CFMF firmly attached to metal surface with a scaffold structure is found to effectively guide the uniform plating/stripping of both the Zn metal in aqueous electrolytes and the Li metal in organic electrolytes, thus enabling much higher efficiencies of Zn (98.4%) and Li (99.7%) for the 100th cycle on the CFMF-modified current collectors than those of bare current collectors. And the so far record high cycling stability for the symmetric cells using CFMF/Zn (2500 h) and CFMF/Li (1000 h) electrodes is achieved at 1 mA cm −2 and 4 mA cm −2 , respectively. Benefiting from the delicately designed CFMF-modified Zn or Li metal anodes , the full cells of Zn–MnO 2 and Li–LiMn 2 O 4 are rendered excellent rate capability and significantly extended cycle life.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米技术
·
电池技术
✓ 已验证
DOI
高影响因子
Energy & Environmental Materials
·
2022
·Vol. 6
·期 5
·e12415
·
IF 13.443
Lin Chen,Jingwen Zhou,Junxiang Zhang,Guicai Qi,Bin Wang,Jianli Cheng
High energy density Li-CO 2 batteries have attracted much attention owing to the “two birds with one stone” feature in fixing greenhouse gas CO 2 and providing renewable energy. However, poor reversibility of the discharge product Li 2 CO 3 is one of the main problems that limit its application, resulting in poor cycling stability and severe polarization. Herein, copper indium sulfide (CIS), a semiconducting non-precious metal sulfide, is fabricated as cathode catalysts for high-performance Li-CO 2 batteries. Combined with the synergistic effect of bimetallic valence bonding and coordinated electron transfer, Li-CO 2 batteries using CIS cathodes exhibit high full specific discharge capacity, excellent rate capability and cycle stability, namely it delivers a high specific full discharge capacity of 8878 μAh cm −2 , runs steadily from 10 to 100 μA cm −2 , and performs a stable long-term cycling behavior (>1050 h) under a high energy efficiency of 84% and a low charge voltage of approximately 3.4 V at 20 μA cm −2 within 100 μAh cm −2 . In addition, a flexible Li-CO 2 pouch cell is constructed to reveal the potential of employing CIS to fabricate flexible high energy storage devices in practical applications. This work shows a promising development pathway toward next-generation sustainable energy storage devices.
研究领域:
电化学
·
能源材料
·
纳米催化
·
可持续能源存储
·
金属-气体电池
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2019
·
IF 4.175
Chunru Li,He Song,Changming Mao,Hongrui Peng,Guicun Li
Antimony (Sb) is an attractive anode material for lithium-ion batteries with high theoretical capacity. However, its practical application is greatly hindered by the rapid capacity fading due to the large volume expansion during lithiation. Tuning the morphology of active materials at the nanoscale or designing reasonable components is essential to address this issue. Employing an antimony sulfide nanorod as semi-sacrificial template, here, we successfully synthesize one-dimensional MoS 2 sheets-decorated Sb@Sb 2 S 3 @C(MoS 2 -Sb@Sb 2 S 3 @C) nano-structure via facile thermal carbonization of Mo-polypyrrole complex coating film. During annealing, metallic Sb from the partial reduction of Sb 2 S 3 nanorods is embedded into amorphous carbon nanotubes that are derived from polypyrrole and simultaneously MoS 2 nanosheets forms on the surface of Sb-Sb 2 S 3 -C nanostructures. This unique hierarchical tubular composite not only can serve as robust skeleton frameworks for accommodating volume changes of metallic Sb and Sb 2 S 3 during cell cycling, but also are characterized by high electronic conductivity (because of the amorphous carbon nanotubes and metallic Sb) and abundant active sites, both of which are beneficial for the improvement of Li-ion storage properties. As expected, the MoS 2 -Sb@Sb 2 S 3 @C composite exhibit a high specific capacity (1596 mAh g −1 at 0.1 A g −1 ), high rate capability (481 mAh g −1 at 5 A g −1 and 355 mAh g −1 at 8 A g −1 ), and stable cycling performance (760 mAh g −1 maintained after 100 cycles at 1 A g −1 ). Our work potentially sheds some light on future development of alloy-type anodes for battery applications.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
电池技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）