ELECTROCHIMICA ACTA
·
2020
·
IF 6.215
Yaosheng Liu,Hanmeng Liu,Zhixia Yao,Yongxing Diao,Guangxing Hu,Qifang Zhang,Yujing Sun,Zhuang Li
pH electrodes exhibited wide applications in the fields of food science, environmental science, and bioanalytical analysis. In this work, we demonstrate the facile fabrication of silver-antimony (Ag–Sb) binary alloy electrodes through a one-step melt casting method. XRD, SEM and EDS were used to characterize the alloy electrodes. The response mechanism of the pH electrode was studied by Tafel plots, which clarified the role of metal (Sb) and metal oxide (SbO ads ) in the pH response process. The corrosion resistance of the alloy electrode was researched by electrochemical impedance spectroscopy (EIS), which proved the advantages of the Ag–Sb alloy electrodes. In addition, our Ag–Sb pH electrodes exhibited promising sensing performance with the near-Nernstian response sensitivity is 54.6 mV/pH. The other performances including response time, stability, reversibility, hysteresis, and temperature coefficient, also demonstrated that the Ag–Sb binary alloy electrodes have good pH speciality, and it will potential applications for environmental monitoring in situ. These research results can complement and perfect the theoretical basis of metal/metal oxide pH electrodes, thus guiding the preparation of metal/metal oxide pH electrodes and promoting the exact and extensive application of metal/metal electrodes in more aspects.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2021
·Vol. 27
·期 10
·4419-4427
·
IF 2.817
Fu Ziyi,Wei Youxiu,Liu Weiming,Li Jiuyong,Li Jiaming,Ma Yibo,Zhang Xiaofeng,Yan Yue
Prussian blue (PB) is a well-known electrochromic material due to its fast response and high cycle stability. We used the multi-step electrodeposition to prepare the PB films (S-PB) with different thickness. SEM image shows that as-grown film has small particles on its surface, which is beneficial for improving electrochromic properties of thicker PB film. The S-PB film with a thickness of 410 nm shows a high transmittance modulation of 82.04% at λ = 680 nm. S-PB and CeO 2 -TiO 2 -Li films were used as working electrode and counter electrode separately to prepare electrochromic devices (ECDs), both of which are inorganic anode materials. At 680 nm wavelength, the device based on double anode materials changes transmittance from 71.25 to 11.71% and the coloration efficiency is 73.5 cm 2 /C. Moreover, the optical modulation of ECD does not change significantly when performing 10,000 cycles.
✓ 已验证
产品关联
DOI
高影响因子
Environmental Science-Nano
·
2019
·Vol. 6
·期 11
·3431-3441
·
IF 7.704
Bowen Xiao,Yinqing Zhang,Xiaolei Wang,Meng Chen,Binbin Sun,Tong Zhang,Lingyan Zhu
The wide production and utilization of nanoparticulate Ag and Ti inevitably result in their release into the environment. Thus far, limited information is available regarding to what extent the nanoparticulate Ag and Ti could accumulate in biota and magnify along the food chain in real natural aquatic environments. With the application of single particle inductively coupled plasma mass spectroscopy, we quantitatively demonstrated that both nanoparticulate Ag (18.8–41.0 nm) and Ti (46.6–116 nm) occurred in the water, sediment and aquatic organisms in Taihu Lake, China. Nanoparticulate Ag exhibited greater bioaccumulation potential compared to its other chemical counterparts, and also a greater bioaccumulation factor than nanoparticulate Ti. Sediment served as a main reservoir for nanoparticulate Ag and Ti, and acted as one important exposure source for invertebrates. According to the concentrations of nanoparticulate Ag and Ti in aquatic organisms at different trophic levels, including a variety of invertebrates and fish species, the total and nanoparticulate Ti appeared to be biodiluted in the food web with trophic magnification factors (TMFs) < 1. Conversely, biomagnification of nanoparticulate Ag was found in the fish food web with a TMF of 1.21, while the total Ag was biodiluted. These findings serve as the first line of evidence on the transfer behaviors of nanoparticulate Ag and Ti along the natural aquatic food chain and underline the distinctive bioaccumulation and biomagnification behaviors of nanoparticles as opposed to their other chemical counterparts.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Materials Technologies
·
2019
·Vol. 4
·期 11
·1900602
·
IF 5.395
Guozhen Li,Rong Zhu
Multisensory tactile systems play an important role in enhancing robot intelligence. A competent robotic tactile system needs to be simple in structure and easily operated, especially with multiple sensations, and have good coordinate ability like human skin. A novel multisensory tactile system for humanoid robotic hands is proposed, allowing the hand to identify objects by grasping and manipulating them. Robotic multifunction sensors based on skin-inspired thermosensation and structured with micro platinum ribbons partially covered with piezo-thermic silver-nanoparticle-doped porous polydimethylsiloxane membrane simultaneously and independently detect contact pressure, local ambient temperature, and thermal conductivity and temperature of an object. Multiple tactile information which is obtained by the robotic sensors is fused comprehensively based on neural network classification to identify diverse objects in uncertain and dynamic gripping with an object recognition accuracy of 95%. This multisensory system enables robotic hand to better interact with its environment, enhances robotic intelligence, and makes various complex tasks feasible for robots, such as sorting material or rescuing from fire or other disasters.
✓ 已验证
产品关联
DOI
高影响因子
ACS Omega
·
2019
·
IF 2.584
Wei Sun,Qi Sun,Qiang Zhao,Luminita Marin,Xinjian Cheng
In this work, SiO2 microspheres were first prepared by a conventional Stöber method and then etched by NaOH solution to obtain porous ones. By tuning the degree of etching, specific surface area of SiO2 microspheres could be controlled. Then, small fluorescent molecules are synthesized and incorporated onto the surface and/or pores of the SiO2 via layer-by-layer reaction to obtain fluorescent microspheres, namely, SiO2–NH2–BODIPY (SiNBB), SiO2–NH2–BODIPY–indole–benzothiazole (SiNBIT), and SiO2–NH2–BODIPY–indole–benzoxazole (SiNBIO). The as-prepared microspheres SiNBB exhibit highly sensitive and selective recognition ability for Hg2+ and Pb2+. When SiNBB encounters Hg2+ and Pb2+, the fluorescence intensity of SiNBB is increased up to fivefold. SiNBIT and SiNBIO are solely sensitive to Hg2+, and both have a single high sensitivity to recognize Hg2+. The adsorption efficiency of Hg2+ by the three fluorescent microspheres SiNBB, SiNBIT, and SiNBIO reached 2.91, 0.99, and 0.98 g/g of microspheres, respectively. Experimental results of A549 cells and zebrafish indicate that the fluorescent microspheres are permeable to cell membranes and organisms. The distribution of Hg2+ in the brain of zebrafish was obtained by the fluorescence confocal imaging technique, and Hg2+ was successfully detected in A549 cells and zebrafish.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Jinyao Zhong,Zheng Xiao,Wenyue Liang,Yifei Wu,Qiaojue Ye,Haitao Xu,Haidong Deng,Liang Shen,Xiliang Feng,Yongbing Long
Microcavity is an efficient approach to manufacture colorful semitransparent organic solar cells (ST-OSCs) with high color purity by tailoring the transmission spectrum to narrow peaks. However, in this type of colorful semitransparent devices, high power conversion efficiency (PCE) and high peak transmittance are not yet simultaneously achieved. This paper proposes a new type of microcavity structure to achieve colorful ST-OSCs with both high PCE and high peak transmittance, in which a hybrid Au/Ag electrode is used as a mirror and WO3 is used as a spacer layer. First, it is demonstrated that the hybrid Au/Ag electrode mirror brings about an improvement of 7.7 and 5.5% for PCE and peak transmittance, respectively, when compared with those of the reference devices using the Ag electrode mirror. Specifically, the PCE of the optimized devices reaches the satisfactory value of over 9%, and the peak transmittance is over 25%. This value of PCE is the highest one reported so far for the microcavity-based ST-OSCs with the same peak transmittance. Second, it is demonstrated that the second-order resonance of the microcavity can be used to improve the color purity of green ST-OSCs by narrowing the transmission peak, and the combination of the second-order and third-order resonance can be used to construct colorful ST-OSCs with mixed colors. Thus, a novel approach is developed to tune the color of ST-OSCs, which is based on high-order resonance modes of the microcavity.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Xu Wang,Jianhong Zhou,Ying Zhu,Wanke Cheng,Dawei Zhao,Guangwen Xu,Haipeng Yu
Improving the conductivity stability of flexible conductors has a positive impact on the working performance and service life of portable electronic devices. However, designing a conductor material with both conductivity-stable and flexible performance is still not an easy task because of the conductive network damage under large deformation or high humidity conditions. Here, we surmount this challenge by developing an interfacial assembly/encapsulation integration strategy for the construction of flexible, transparent, and conductivity-stable film. Under the synergistic effect of coordination complexation and hydrogen bonding, silver nanowires (AgNWs) are sandwiched encapsulated by regenerated cellulose film (as flexible substrate) and poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) nanosheets (as sealing coat). The resulting hybrid film has a robust interfacial structure and prominently stable properties. Even when subjected to harsh condition such as a high-moisture environment of 90% relative humidity and 65 °C temperature for up to 60 days, repeated bending for 500 times, peeling over 400 times or soaking in water for 30 days, the film still exhibits a high and stable conductivity, better than most previously reported values for AgNWs-based films. With this strategy as base, we demonstrate a flexible, transparent and biocompatible strain-to-electricity sensor with high working stability and performance.
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2019
·Vol. 12
·期 2
·322
·
IF 2.972
Ren’ai Li,Kaili Zhang,Guangxue Chen
Conductive paper has the advantages of being low-cost, lightweight, disposable, flexible, and foldable, giving it promising potential in future electronics. However, mainstream conductive papers are opaque and rigid, which seriously affect the wide application of conductive paper. In this paper, we demonstrate a highly transparent, flexible, and conductive paper, fabricated by mixing cellulose nanofibers (CNFs) with silver nanowires (AgNWs) and then plasticizing with choline chloride/urea solvent. The as-prepared CNF/AgNW paper showed high transparency (~90% transmittance) and flexibility (~27% strain), and low sheet resistance (56 Ω/sq). Moreover, the resistance change of CNF/AgNW paper increased only ~1.1% after 3000 bending−unbending cycles under a 150° large angle, implying a long working life and stability. In view of this, our methodology has the potential to open a new powerful route for fabrication of paper-based green electronics.Keywords:conductive paper;cellulose nanofiber;silver nanowires;choline chloride/urea
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2019
·
IF 7.723
Haiqiang Lin,Hongyan Qu,Weikun Chen,Kang Xu,Jianwei Zheng,Xinping Duan,Hesheng Zhai,Youzhu Yuan
In gas-phase chemoselective hydrogenation of crotonaldehyde on Ag-based catalysts, zirconia doping on silica supports was found to improve catalytic performance in terms of unsaturated alcohol selectivity, hydrogenation activity, and stability. The surface modification of silica by zirconia doping favors the fine dispersion of Ag species due to the enhanced quantity and strength of surface acid sites, which enable construction of abundant catalytic sites effective for C O bond hydrogenation. High crotyl alcohol selectivity, exceeding 80%, and significant inhibition of monohydrogenation on the C C bond were observed on the optimal Ag/Zr–SiO 2 catalyst. Dynamic O 2 chemisorption measurement revealed that the pure Ag powders did not chemisorb O 2 irreversibly under 323 K, but SiO 2 or Zr–SiO 2 supported Ag catalysts did. The amounts of Ag active for O 2 chemisorption, which are at least one order of magnitude lower than that of surface Ag derived from TEM and XRD characterizations, match well with the perimeter interface Ag of hemispherical particles. A strong correlation between hydrogenation activity and O 2 uptake on those Ag/SiO 2 and Ag/Zr–SiO 2 catalysts with different Ag dispersions and deactivation degrees was observed, implying that the effective catalytic sites for crotonaldehyde chemoselective hydrogenation may originate from accessible interface sites with unique redox properties. Catalyst induction and deactivation were observed on both Ag/SiO 2 and Ag/Zr–SiO 2 catalysts in real catalytic operation. Changes in metal stable interface structure, rather than metal aggregation and coagulation, are assumed to be the main cause of irreversible catalyst deactivation, because the apparent Ag particle sizes changed slightly, but the oxygen chemisorption ability deteriorated considerably. Electropositive Ag sites interacting with neighboring oxygen from oxide supports at the ternary Ag–ZrO 2 –SiO 2 interface are proposed to account for highly selective C O bond hydrogenation to produce the desired unsaturated alcohol.
✓ 已验证
产品关联
DOI
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2019
·
IF 3.579
Xiaqing Wu,Guowen Zhang,Xing Hu,Junhui Pan,Yijing Liao,Huafang Ding
Protein glycation can produce the advanced glycation end products (AGEs), which has a potential health risk due to its relevance with diabetic complications. Searching for potent inhibitors to suppress hyperglycemia-induced protein glycation is of great significance. Here, we probed the anti-glycation potential of epicatechin gallate (ECG), an important ingredient of green tea, by spectroscopy and chromatography supplemented by molecular docking. It was found that ECG suppressed the carbonylation and the formation of amyloid cross-β structures of bovine serum albumin (BSA) as well as the generation of AGEs in BSA–fructose model by 65.6%, 73.7% and 87.0%, resepctively. A combination of ECG with epigallocatechin gallate (EGCG) at molar ratios from 0.5:1 to 2:1 exhibited the interactive effects on AGEs formation from moderate antagonism to synergy. Moreover, ECG at 44.2 μg/mL showed a trapping efficiency of 81.6% for the important precursor methylglyoxal (MGO) of AGEs within 24 h, and the formed ECG–mono-MGO and ECG–di-MGO adducts were verified by LC–QqQ–MS analysis. The inhibitory effect of ECG on the protein glycation may be due to its MGO trapping and the specific binding with certain amino acid residues of BSA. These findings may provide the theoretical basis for the development of ECG as an inhibitor of protein glycation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
STARCH-STARKE
·
2019
·
IF 1.795
Jia Shao,Zheng Zhang,Shixing Zhao,Sui Wang,Zhiyong Guo,Hongzhen Xie,Yufang Hu
As promising soft materials, various excellent properties of hydrogels have received widespread attention during recent years. Mechanical properties and self-healing performance are required characteristics for hydrogels in practical applications. An important challenge is to develop hydrogels exhibiting mechanical performance and self-recoverability through physical cross-linking. In this work, the authors report a hydrogel consisting of a fully physically linked poly (vinyl alcohol)/agarose (PVA/AG) dual-network, which is of high toughness and self-healing properties. The synthesis process of the PVA/AG hydrogel is convenient, with AG as the first network, and hydrogen bonding and crystal-associated PVA as the second network to form a dual physical crosslink. Due to this physical cross-linking, the PVA/AG hydrogel has good mechanical properties (tensile strength of 6.5 MPa to 14.6 MPa, ductility of 168% to 214%). The highest compressive strength of hydrogel is up to 3.66 MPa, which is almost 8 times that of pure PVA hydrogel. In addition, it has excellent self-healing properties without stimulation or healing agents. Compared to pure PVA hydrogel, PVA/AG hydrogels have higher thermal stability due to higher decomposition temperatures and lower degradation rates. In this study, the authors also initially explore the potential application of obtained hydrogel.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PAPERS
·
2019
·Vol. 74
·期 2
·485-497
·
IF 1.246
Quan Cong,Liu Jiayu,Sun Wei,Cheng Xinjian
It is extremely necessary to detect heavy metals sensitively and selectively, especially the ions that will cause great harm to humans and the environment. This work deals with two fluorescent chemosensors and their outstanding role when detecting Zn 2+ and Cd 2+ ions. First, a small molecular chemosensor (TPB) has been designed and synthesized via Suzuki reaction using one part of benzene-1,3,5-triyltriboronic acid and three parts of 2-bromo-1, 10-phenanthroline as starting materials. And then, its corresponding macromolecular fluorescent chemosensor (PTPB) was synthesized. The infrared spectra, mass spectrometry (MS), and 1 H-NMR were used to study the structures of TPB and PTPB. From what has been studied, the TPB and PTPB were stable in a relative wide pH range. As soon as the Cd 2+ and Zn 2+ ions added, fluorescence of the two sensors TPB and PTPB was changed obviously. In addition, PTPB was found have better performance to both Cd 2+ and Zn 2+ than TPB through the ‘‘molecular wire’’ mechanism. Job’s plots were also be tested, showing that the combination ratio of TPB and PTPB to Cd 2+ and Zn 2+ were both 3:1 (ion/sensor). In addition, the minimum detection limits of the macromolecular chemosensor PTPB for Cd 2+ and Zn 2+ reached 0.424 μM and 1.27 μM, respectively.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）