Materials Research Express
·
2017
·Vol. 4
·期 1
·015603
·
IF 1.068
Bo Yu,Yongkun Liu,Guohua Jiang,Depeng Liu,Weijiang Yu,Hua Chen,Lei Li,Qin Huang
In this paper, the electrospun Ag nanoparticles and g-C3N4 (Ag/g-C3N4) loaded composite carbon nanofibers were successfully prepared combing the electrospinning technology and carbonization treatment. The composition and microstructure of the resultant composite nanofibers were characterized by x-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive spectrometer (EDS), transmission electron microscopy (TEM) and x-ray photoelectron spectrometry (XPS). Due to the synergistic effect between catalytic activity of Ag nanoparticles (NPs) and g-C3N4 and excellent adsorption capacity of carbon nanofibers, the resultant electrospun Ag/g-C3N4 loaded composite carbon nanofibers exhibited excellent conversion of 4-nitrophenol to 4-aminophenol and benzylamine to N-benzylbenzaldimine. The resultant hybrid carbon composite nanofibers offer the significant advantages, such as low dosage, high catalytic activity, easy recycling and excellent stability.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2016
·
IF 7.145
Wenhui Wang,Ting He,Xuehua Liu,Weina He,Hengjiang Cong,Yangbin Shen,Liuming Yan,Xuetong Zhang,Jinping Zhang,Xiaochun Zhou
Hydrogen is regarded as a future sustainable and clean energy carrier. Formic acid is a safe and sustainable hydrogen storage medium with many advantages, including high hydrogen content, nontoxicity, and low cost. In this work, a series of highly active catalysts for hydrogen production from formic acid are successfully synthesized by controllably depositing Pd onto Ag nanoplates with different Ag nanofacets, such as Ag{111}, Ag{100}, and the nanofacet on hexagonal close packing Ag crystal (Ag{hcp}). Then, the Pd–Ag nanoplate catalysts are supported on Vulcan XC-72 carbon black to prevent the aggregation of the catalysts. The research reveals that the high activity is attributed to the formation of Pd–Ag alloy nanofacets, such as Pd–Ag{111}, Pd–Ag{100}, and Pd–Ag{hcp}. The activity order of these Pd-decorated Ag nanofacets is Pd–Ag{hcp} > Pd–Ag{111} > Pd–Ag{100}. Particularly, the activity of Pd–Ag{hcp} is up to an extremely high value, i.e., TOF{hcp} = 19 000 ± 1630 h–1 at 90 °C (lower limit value), which is more than 800 times higher than our previous quasi-spherical Pd–Ag alloy nanocatalyst. The initial activity of Pd–Ag{hcp} even reaches (3.13 ± 0.19) × 106 h–1 at 90 °C. This research not only presents highly active catalysts for hydrogen generation but also shows that the facet on the hcp Ag crystal can act as a potentially highly active catalyst.
研究领域:
催化化学
·
材料科学
·
能源化学
✓ 已验证
DOI
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2025
·Vol. 51
·期 4
·2071-2088
·
IF 3.5
Wu Yilin,Li Yiping,Zhang Kai,Hu Jinhai,Yan Hong
Photocatalytic CO 2 reduction technology can use sunlight to convert CO 2 into fuel or chemical raw materials, slowdown the greenhouse effect and achieve sustainable development. Therefore, we have developed a series of high-quality carbon quantum dots using alkaline lignin (AL) as the core raw material and using high efficiency hydrothermal method. Ag-BiVO 4 composite was prepared by hydrothermal method. Then, the Ag-BiVO 4 -CQDs photocatalytic composite was prepared by constant temperature water bath method. The structure and morphology of the composites were characterized by X-ray diffraction, transmission electron microscope and X-ray photoelectron spectroscopy. Through optical and electrochemical tests, it can be seen that the composite has better interfacial charge transfer and electron transport ability. In the visible light catalytic CO 2 reduction reaction, Ag-BiVO 4 can selectively reduce CO 2 to CH 4 , and the CH 4 yield is greatly improved after Ag-BiVO 4 combines with CQDs. The 3 h CH 4 yield increased from 17.64 μmol/g to 97.82 μmol/g after reduction by adding 40 mL CQDs to Ag-BiVO 4 composite, which is 5.54 times that of Ag-BiVO 4 . The results showed that the introduced CQDs were uniformly attached to Ag-BiVO 4 . As an electron transport medium, CQDs can efficiently facilitate the transfer of photogenerated carriers, suppress the recombination of electron–hole pairs, and enhance the photocatalytic performance of Ag-BiVO 4 -CQDs for CO 2 reduction.
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
产品关联
DOI
高影响因子
PHYSICA SCRIPTA
·
2024
·Vol. 99
·期 11
·115918
·
IF 2.6
Shengkai Liu,Cheng Chang,Boyu Chen,Han Song,Jiashen Fan,Yujie Fu,Zhiguo Liu
In this study, catechin-functionalized Fe3O4-Ag nanocomposites were synthesized by a hydrothermal method. The motivation for this study was to develop a novel antibacterial agent with enhanced stability and biocompatibility. The objective was to create a nanocomposite combining the antimicrobial properties of silver with the antioxidant and bioactive characteristics of catechin. We hypothesized that the synergistic effect of catechin and Fe3O4-Ag would yield a highly effective antibacterial material against common pathogens. The obtained nanocomposites were characterized by TEM, SEM, AFM, XPS, XRD, FTIR and physical property measurement system (PPMS). TEM images indicated that catechin-functionalized Fe3O4-Ag nanocomposites have a spherical morphology with an average size of 25.7 nm. The SEM and AFM imaging revealed that the nanocomposites appear as a number of large particles with average diameter of 581 nm. XPS and XRD and FTIR measurement confirmed the presence of catechin components, Fe3O4 and Ag in the nanocomposites. Taken together, we conclude that the catechin-Fe3O4-Ag nanocomposites in this study have a jujube cake structure in which the Fe3O4-Ag alloy nanoparticles serve as the jujube and the condensed catechin form into the cake substrate. The antimicrobial test indicated the catechin-functionalized Fe3O4-Ag nanocomposites have obvious inhibitory effects on E.coli, S.aureus, and C.albicans.
研究领域:
纳米生物学
·
材料科学
·
微生物学
✓ 已验证
产品关联
DOI
高影响因子
IEEE SENSORS JOURNAL
·
2024
·
IF 4.3
Jingxuan Wu,Yu Wan,Zhenxing Wang,Yimu Wang,Qingsong Luo,Changhao Feng,Tatsuo Yoshinobu
The efficient and reliable monitoring of acetic acid (CH3COOH) is significant to environmental protection and human healthcare. LaFeO3 is a potential sensing material for CH3COOH with its good sensitivity and high plasticity. To further improve the sensing properties of LaFeO3 to meet the requirements of applications, we successfully utilized the facile electrospinning technique to fabricate a series of CH3COOH-sensitive Ag-doped (0–5 mol%) LaFeO3 nanotubes. The systematic characterization shows that the appropriate content (4 mol%) of Ag doping can effectively ameliorate the material morphology to realize loose porous structures. Meanwhile, the sensitization effect of Ag and ameliorated morphology significantly enhance the gas-sensing properties of LaFeO3 to CH3COOH vapor. The optimal Ag-doped LaFeO3 (4 mol%) loose nanotubes-based gas sensor results in a detection limit of 0.5 ppm and 3.6-fold enhancement of the response to 100-ppm CH3COOH compared with the pure LaFeO3 compact nanotubes at a low operating temperature (150 °C). It also exhibits excellent selectivity to CH3COOH and good long-term stability. Therefore, Ag-doped LaFeO3 can be regarded as a promising material for sensing CH3COOH in practical applications. Finally, the mechanism of enhanced gas-sensing properties is discussed.
研究领域:
材料科学
·
环境科学
·
传感器技术
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 3
·1-13
·
IF 5.3
Bi Leyao,Fu Boyan,Lin Jiahui,Wen Junsheng,Fu Jiaxing,Zou Binglin,Su Ningning,Wang Chunjie,Wang Yue
Ag-modified ZnO coral-like nanosheets were synthesized for the first time using a simple hydrothermal method. Compared to other Ag-modified ZnO sensors, the sensor with 2 wt% Ag content demonstrates excellent ethanol-sensing performance. The maximum response value of 67.42 can be achieved at the optimal operating temperature of 260 °C for 100 ppm ethanol gas, with corresponding response/recovery time of 6/75 s, respectively. This sensor also exhibits superior selectivity, reproducibility, and long-term stability. Techniques such as XRD, XPS, SEM, and TEM were employed to characterize the physicochemical properties of the gas-sensitive materials. Further research indicates that the enhanced gas-sensing properties of the composite materials can be mainly attributed to the unique coral-like nanosheet structure, the relatively high-specific surface area (9.8706 m 2 /g), and the combined effects of the Ag-ZnO heterostructure, as well as the synergistic interplay of electronic sensitization and spillover effects. This research offers valuable insights into the modification of ZnO-based gas-sensing materials with noble metals. Graphical
研究领域:
材料科学
·
传感器技术
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
·
2018
·
IF 2.891
Zhongyi Jiao,Junlei Zhang,Zhendong Liu,Zhen Ma
Ag 2 MoO 4 shows low photocatalytic activity under visible light. It would be interesting to develop Ag 2 MoO 4 -based composite/heterojunction photocatalysts working efficiently under visible light. Herein, novel Ag/AgCl/Ag 2 MoO 4 composites were obtained via photoreduction of AgCl/Ag 2 MoO 4 composites prepared by sequential precipitation. The composition, morphologies, and optical properties of the samples were studied via various characterization techniques. Photocatalytic degradation of rhodamine B (RhB), methylene blue (MB), methyl orange (MO), norfloxacin (NOF), and tetracycline hydrochloride (TC) solutions was conducted under visible-light irradiation. An optimal Ag/AgCl/Ag 2 MoO 4 catalyst showed much higher photocatalytic activity than Ag 2 MoO 4 , and it also showed reasonably fine recyclability. Through radical-capturing experiments, photogenerated holes (h + ) were determined to be the main active species whereas hydroxyl radicals ( OH) were found to play a secondary role in photocatalysis. Possible photocatalytic mechanisms were proposed.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2019
·Vol. 43
·期 16
·6234-6241
·
IF 3.069
Xinfu Zhao,Wei Ju,Jian Zhang,Benxue Liu,Jing Zhang,Xibin Yi
TiO2/SiO2-Based nanocomposites with highly porous structures have received increasing attention due to their excellent photocatalytic activity. In this work, a TiO2/SiO2/Ag ternary composite aerogel with enhanced visible-light photocatalytic activity has been successfully synthesized through a facile sol–gel method combined with a supercritical drying technique. The specific surface area and pore structure of TiO2/SiO2/Ag aerogel could be controlled by adjusting the Si content. The TiO2/SiO2/Ag aerogel with pore size of 9.2 nm achieved the maximum adsorption capacity of oxytetracycline. The presence of SiO2 in TiO2/SiO2/Ag improved the compression strength of the aerogel and thus achieved long-term stability in photocatalysis. Furthermore, the addition of Ag particles in TiO2/SiO2/Ag effectively decreased the recombination of photo-electrons and holes. The photocatalytic degradation rates of oxytetracycline over the TiO2/SiO2/Ag aerogel with a mole ratio of Ag : Si : Ti = 0.1 : 10 : 4 were 3.1 and 2.3 times those over P25 and a TiO2/SiO2 aerogel. The enhanced photocatalytic performance of the TiO2/SiO2/Ag aerogel is attributed to the large specific surface area, 3-D porous structure, high electrical conductivity and compression strength of this novel composite aerogel.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Yangkai Xiong,Zhiqiang Fang,Jipeng Li,Zheng Li,Guoqing Wang
Biological fouling seriously jeopardizes the development of the marine industry. Although hydrogels, as a kind of state-of-the-art antifouling material, have received wide attention, their mechanical strength is still relatively weak, and the synergistic antifouling method is comparatively single, thus limiting the performance of hydrogels. Here, a zwitterionic sulfobetaine methacrylate (SBMA)-acrylamide (AM)/sodium alginate (SA) double-network (DN) antifouling hydrogel with superb antifouling ability and outstanding mechanical properties was prepared by grafting MXene/Ag (M/Ag) and the powerful biocide polyhexamethylene biguanide (PHMB). The prepared M/Ag has a great bactericidal effect (99.9%), and the DN-M/Ag-PHMB hydrogel demonstrates high tensile strength (5.8 MPa), remarkable antiprotein adhesion, bactericidal, and antialgal adhesion. This work proves that the DN-M/Ag-PHMB hydrogel has an exceptional antifouling ability in all three stages of biofouling formation and has a promising future as a new type of green marine antifouling material.
研究领域:
材料科学
·
生物学
·
海洋科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 75
·61239-61248
·
IF 3.84
Jun Liu,Wei Wu,Qingyong Tian,Shuanglei Yang,Lingling Sun,Xiangheng Xiao,Feng Ren,Changzhong Jiang,Vellaisamy A. L. Roy
Plasmonic photocatalysts coupled with semiconductors are one of the most popular combinations in environmental remediation applications. In this regard, a novel tube-like α-Fe2O3@Ag/AgCl hybrid structure is fabricated by anchoring Ag/AgCl hybrid nanoparticles on the surface of α-Fe2O3 short nanotubes (SNTs) by a step-by-step strategy. Firstly, the monodispersed α-Fe2O3 SNTs have been synthesized via an anion-assisted hydrothermal process followed by the loading of Ag nanoparticles on the surface of α-Fe2O3 SNTs through the classic silver mirror reaction mechanism. From in situ oxidation of Ag nanoparticles, the final product α-Fe2O3@Ag/AgCl heterostructures has been obtained. We study the morphology, composition, and photocatalytic properties of the as obtained tube-like α-Fe2O3@Ag/AgCl nano-heterostructures. The photocatalytic activities of as obtained photocatalysts have been tested by the degradation of organic dye Rhodamine B (RhB) under simulated sunlight (UV + visible light), visible light and UV light irradiation. The main reason for the enhanced photocatalytic performance is attributed to the broad spectral response from the combination of narrow/wide bandgap semiconductors with metallic Ag nanoparticles and efficient charge transfer from plasmon-excited Ag nanoparticles to α-Fe2O3 and AgCl. Finally, this hybrid structure provides a roadmap for the controlled synthesis of plasmonic photocatalysts with excellent properties, and can be used for practical application in environmental issues.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
AUSTRALIAN JOURNAL OF CHEMISTRY
·
2018
·Vol. 72
·期 3
·200-205
·
IF 1.059
Jianhua Ge,Yuchong Chen,Jing Xu,Yujie Liu,Long Zhang,Fugeng Zha
The plasmonic photocatalyst Ag@AgCl was successfully prepared through a facile solvothermal method via a deep eutectic solvent (DES), which is composed of choline chloride and urea. X-Ray diffraction, scanning electron microscopy, energy-dispersive X-ray, element-mapping, X-ray photoelectron spectroscopy, N2 absorption–desorption, and UV-vis diffuse reflectance techniques were adopted to analyse the performance of the plasmonic photocatalyst. Characterisation results indicated that the DES not only served as a solvent and Cl source, but also as a reductant. Meanwhile, the probable mechanism for the formation of Ag@AgCl is discussed, which revealed a visible light enhanced photocatalytic property for the degradation of benzidine. Furthermore, the photocatalyst showed no decrease in its catalytic activity even after five cycles of operation. Finally, a possible photocatalytic oxidation mechanism of Ag@AgCl is proposed.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yidan Zhang,Zhiguang Guo
Multifunctional wearable textiles can simulate human perception and convert it into visual data, which has advanced application prospects. As an important branch, thermal management wearable textiles have been widely concerned in the aspects of thermal insulation, flame retardant, photothermal anti-icing, electrothermal deicing and even water evaporation. Here, inspired by the bearing structure, we simply soaked the PET textile in Ag@MXene hybrid solution several times to form a Ag@MXene conductive network with Ag NPs as the connection point on the textile fiber, and finally carry out hydrophobic modification. Based on plasma effect, the synergistic action of Ag NPs and MXene enhances the photothermal response of the material. In addition, the addition of Ag NPs effectively reduces the stacking between MXene layers and forms a Ag@MXene conductive network with Ag NPs as the connection point on the textile fibers. The stable temperature range of PDMS/Ag@MXene PET textile is 70–80 °C under one solar illumination intensity, and the stable temperature of PDMS/Ag@MXene PET textile can reach 117 °C at a constant voltage of 3 V. Based on the excellent thermal effect, this textile achieves photothermal anti-icing, electric thermal de-icing, keeping warm and removing sweat. The textile has a water evaporation efficiency of about 0.58 g h −1 , which can achieve excellent anti-sweat function. Finally, the textile also achieved rapid flame retardant within 7 s. PDMS/Ag@MXene PET textile processes excellent photothermal and electrothermal conversion ability, acid/water stability and flame retardant ability, and has promising application prospects in thermal management textiles such as deicing and anti-icing, fire prevention, warmth and water evaporation.
研究领域:
材料科学
·
纺织工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）