Biomaterials Science
·
2025
·
IF 5.7
Xinyu Wang,Qingbin He,Lining Wang,Chengzhilin Li,Wenyu Zhang,Zhonghou Rong,Qingqing Yin,Yingchun Zhao
Sepsis, an inflammatory disease caused by bacterial infection, has become a global public health crisis. Excessive reactive oxygen species (ROS) in sepsis patients act as the primary trigger for activating intracellular immune pathways, ultimately leading to multiple organ dysfunction syndrome. The overexpression of acidic metabolites and ROS, characteristic of the infected microenvironment, significantly impedes sepsis treatment. Cyclic GMP-AMP synthase (cGAS), a cytosolic DNA sensor, plays a key role in inflammatory diseases. The detrimental effects of STING in sepsis have been well documented. Here, we developed a pH-responsive nanotherapy platform (DMSNM@C-178/PAA) that combines ROS scavenging with cGAS-STING pathway inhibition for anti-inflammatory therapy. This nanoparticle is selectively released in the infected microenvironment, where reduced molybdenum-based polyoxometalates (Mo-POM) efficiently neutralize toxic ROS in vivo, while C-178 selectively inhibits the cGAS-STING pathway, thereby attenuating the inflammatory response and preventing organ deterioration. In vitro and in vivo studies demonstrate that DMSNM@C-178/PAA treats sepsis by eliminating excess ROS and modulating autoimmune dysfunction via the cGAS-STING pathway, providing a novel therapeutic strategy for sepsis management.
研究领域:
医学
·
免疫学
·
纳米医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2025
·
IF 3.7
Kang Liu,Shuang Luo,Jianying Liang,Pengfei Xu,Jinglv Feng,Shumin Qin,Jien Li
Graphical A hydrothermal process is used for co-doping Mo and Zn into tunnel-structured MnO 2 (MZMO), enhancing its ion diffusion kinetics and electrical conductivity by introducing impurity energy levels and generating oxygen vacancies. This co-doping strategy also stabilizes the MnO 2 framework, enabling the MZMO cathode to achieve exceptional capacity, highly reversible H + /Zn 2+ co-intercalation, and prolonged cycle life. To address the rising demand for eco-friendly and efficient energy storage devices, rechargeable aqueous zinc ion batteries (AZIBs) are emerging as a promising candidate for large-scale energy storage. α-MnO 2 has attracted extensive attention for its open channels and exceptional Zn 2+ storage capacity. However, the electrochemical performance of α-MnO 2 is significantly hindered by severe structural collapse and sluggish reaction kinetics. Herein, we propose a simple hydrothermal approach for co-doping Mo and Zn into tunnel-structured MnO 2 (MZMO). The ion diffusion kinetics of MZMO are optimized due to ameliorated electrical conductivity by doped cations and introduced oxygen vacancies within the MnO 2 lattice. Moreover, Mo and Zn co-doping stabilizes the MnO 2 framework, significantly enhancing its electrochemical performance during prolonged cycling. Charge storage mechanism analysis further validates the extraordinary stability of the MZMO phase structure during the Zn 2+ /H + co-intercalation and deintercalation. The MZMO cathode demonstrates rapid and reversible Zn 2+ storage, with a high capacity of 395 mAh g −1 at 0.2 A g −1 , and the capacity remains at 136 mAh g −1 after 1000 cycles at 2 A g −1 . This study demonstrates Mo and Zn co-doping is an effective strategy to enhance the electrochemical performance of MnO 2 , offering valuable insights for developing other promising cathodes for AZIBs.
研究领域:
材料科学
·
能源存储技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Petroleum Science
·
2023
·
IF 5.6
Wei-Wei Feng,Ye-Gui Qian,Ting-Hai Wang,Qing-Yan Cui,Yuan-Yuan Yue,Pei Yuan,Xiao-Jun Bao
To deeply understand the effects of support properties on the performance of Mo-based slurry-phase hydrocracking catalysts, four Mo-based catalysts supported on amorphous silica alumina ( ASA ), γ -Al 2 O 3 , ultra-stable Y (USY) zeolite and SiO 2 were prepared by the incipient wetness impregnation method, respectively, and their catalytic performances were compared in the vacuum residue (VR) hydrocracking process. It is found that the Mo/ASA catalyst exhibits the highest VR conversion among the different catalysts, indicating that both the appropriate amount of acid sites, especially B acid sites and larger mesoporous volume of ASA can enhance the VR hydrocracking into light distillates. Furthermore, Mo catalysts supported on the different supports show quite different product distributions in VR hydrocracking. The Mo/ASA catalyst provides higher yields of naphtha and middle distillates and lower yields of gas and coke compared with other catalysts, it is attributed to the highest MoS 2 slab dispersion, the highest sulfuration degree of Mo species, and the most Mo atoms located at the edge sites for the Mo/ASA catalyst, as observed by HRTEM and XPS analyses. These features of Mo/ASA are beneficial for the hydrogenation of intermediate products and polycyclic aromatic hydrocarbons to restrict the gas and coke formation.
研究领域:
催化化学
·
石油加工工程
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 24
·7510-7519
·
IF 6.177
Biyun Fang,Jiahui Li,Fangming Liu,Chuanfeng Zhang,Chunyan Li,Jun Ni,Jianxin Lin,Bingyu Lin,Lilong Jiang
The development of a Co–Mo bimetallic catalyst played a crucial role in ammonia synthesis. However, its underlying mechanism is not well understood and the optimal catalyst has yet to be obtained. Herein, we designed two methane-treated ceria-supported Co–Mo bimetallic catalysts with different dispersions and segregations of Mo and Co species by changing the order of addition of Mo and Co species. There is the segregation of Mo and Co species on the surface of the catalyst with the subsequent addition of Co and Mo species (Mo/Co–C), leading to a higher proportion of low oxidation states of Mo species as well as a larger amount of exposed Mo and Co species, oxygen vacancies and concentration of Ce3+. As a result, there is a larger amount of nitrogen and hydrogen species adsorbed on Mo/Co–C, and the migration and exchange of the adsorbed hydrogen species are also boosted. Mo/Co–C shows 1.7 times higher ammonia synthesis activity and a superior pressure effect in ammonia synthesis than its counterpart obtained by the simultaneous addition of Co and Mo species. These findings are essential for the further development of bimetallic catalysts.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2015
·
IF 3.942
Li Yue,Guangci Li,Feng Zhang,Lei Chen,Xuebing Li,Xiang Huang
A series of CoMoO 4 hydrates composed of nanorods have been synthesized with different alcohol–water solvent systems, and the corresponding Co–Mo sulfides are obtained after sequential calcination and sulfurization. The characterization results show the change in solvent system can efficiently adjust the particle size of the Co–Mo precursors, while cannot affect their components and morphologies. Because of the different particle size, the specific surface areas (SSA) of the final Co–Mo sulfides are different. The particles with small size can lead to a high SSA that benefits the exposure and dispersion of active components, and further promote the incorporation of MoS 2 slabs with Co atoms to form “Co–Mo–S” structures on the surface of the sulfides. More “Co–Mo–S” structures would create more coordinative unsaturated sites with high activity in situ during hydrodesulfurization (HDS) reaction, resulting in a higher HDS activity. Among the Co–Mo sulfides, since S-m/w derived from methanol–water system possesses the smallest particle size and the most active sites, it naturally exhibits the highest HDS activity toward dibenzothiophene.
研究领域:
催化化学
·
材料科学
✓ 已验证
DOI
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-13
·
IF 16.6
Chen Shiyi,Zhang Shishi,Guo Lei,Pan Lun,Shi Chengxiang,Zhang Xiangwen,Huang Zhen-Feng,Yang Guidong,Zou Ji-Jun
Surface reconstruction generates real active species in electrochemical conditions; rational regulating reconstruction in a targeted manner is the key for constructing highly active catalyst. Herein, we use the high-valence Mo modulated orthorhombic Pr 3 Ir 1− x Mo x O 7 as model to activate lattice oxygen and cations, achieving directional and accelerated surface reconstruction to produce self-terminated Ir‒O bri ‒Mo (O bri represents the bridge oxygen) active species that is highly active for acidic water oxidation. The doped Mo not only contributes to accelerated surface reconstruction due to optimized Ir‒O covalency and more prone dissolution of Pr, but also affords the improved durability resulted from Mo-buffered charge compensation, thereby preventing fierce Ir dissolution and excessive lattice oxygen loss. As such, Ir‒O bri ‒Mo species could be directionally generated, in which the strong Brønsted acidity of O bri induced by remaining Mo assists with the facilitated deprotonation of oxo intermediates, following bridging-oxygen-assisted deprotonation pathway. Consequently, the optimal catalyst exhibits the best activity with an overpotential of 259 mV to reach 10 mA cm geo −2 , 50 mV lower than undoped counterpart, and shows improved stability for over 200 h. This work provides a strategy of directional surface reconstruction to constructing strong Brønsted acid sites in IrO x species, demonstrating the perspective of targeted electrocatalyst fabrication under in situ realistic reaction conditions.
研究领域:
电化学
·
材料科学
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2020
·
IF 4.473
Yin’an Zhu,Ye Pan,Weiji Dai,Tao Lu
Electrochemical splitting of water to hydrogen is widely considered as an efficient and sustainable solution to relieve the energy crisis. In this work, we report a facile dealloying method based on metallic glass (Ni61Zr36Mo3) to introduce abundant oxygen vacancies (Ov) for the electrocatalytic hydrogen evolution reaction (HER). The corroded ribbons are composed of a sandwich-like structure with Ni–Mo–O nanoporous layer outside and raw metallic glass inside. This complex structure delivers a low overpotential of 71 ± 2.6 mV at −20 mA cm–2geo in 1.0 M KOH solution, a Tafel slope of 57 ± 3 mV dec–1, and 100 h long-term stability for HER, which is much better than those of the crystallized counterpart, nanoporous Ni, and the commercial benchmark 20% Pt/C electrocatalyst. The high concentration of oxygen vacancies (71.5%), the alloying effect of Mo, and amorphous composition synergistically contribute to the superior electrocatalytic ability and enhanced reaction kinetic of nanoporous Ni–Mo–O, indicating it an excellent low-cost alternative for platinum in hydrogen production.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Alfin Kurniawan,Jian Qiang Zhong,Ze Zhen Wang,Chun Hui Zhou
Allyl alcohol, an industrially valuable intermediate in organic synthesis, is conventionally produced through selective hydrogenation of acrolein and hydrolysis of chloropropene. However, these processes currently face challenges due to the unsustainability of fossil feedstocks. A more sustainable production of allyl alcohol from renewable feedstock (i.e., glycerol) has been demonstrated through gas-phase catalytic reaction over metal oxide catalysts with and without external H2. Improved understanding of the reaction mechanism of glycerol to allyl alcohol conversion is an important effort to rationally design more efficient catalysts. In this work, we investigate gas-phase conversion of glycerol to allyl alcohol through consecutive dehydration and hydrogen transfer reactions over Mo–V oxides supported on acid-modified montmorillonite (HMMT). The use of HMMT as a support enables the well dispersion of metal oxide particles with nominal loadings up to 5 wt % on the catalyst surface while the acidic sites facilitate dehydration of glycerol to acrolein with ∼74% selectivity. By modulating the nominal total Mo+V loading, Mo–V/HMMT catalyst with a 10 wt % metal loading afforded allyl alcohol in 22% yield at 320 °C and ambient pressure. X-ray photoelectron spectroscopic analysis of this bifunctional catalyst in the as-prepared and post-catalysis (spent) states showed changes in the surface Mo(VI)═O species and V4+/V5+ redox ratio; the latter was found to decrease due to the involvement of lower valence V4+ species in the hydrogen transfer reaction of acrolein. Meanwhile, the amount of surface Mo(VI)═O species with weak electronic metal–support interaction decreases after the reaction. Catalytic tests using an aqueous acrolein feed solution suggested the role of water as a hydride donor in transfer hydrogenation of this unsaturated aldehyde to allyl alcohol, while the addition of alcohol-containing compounds, such as 2-propanol and 1,2-propanediol leads to lower allyl alcohol selectivity with time on stream. The results presented here could guide the development of improved supported Mo−V oxide catalysts and reaction systems for efficient gas-phase glycerol conversion to allyl alcohol.
研究领域:
化学工程
·
催化科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Yue Liu,Chunkai Wang,Ding Ma,Mengge Li,Yuting Sun,Xiaofei Sun,Yan Zhu,Bin Yao,Yongfeng Li,Zhanhui Ding
It is proved that secondary phases, such as Cu 2 Se, and ZnSe etc., and MoSe 2 layer can form at Cu 2 ZnSn(S,Se) 4 (CZTSSe)/Mo electrode interface, due to that Mo electrode reacts with CZTSSe and Se vapor during selenization process. The secondary phases and MoSe 2 with inappropriate thickness can decrease power conversion efficiency (PCE) of CZTSSe solar cell. In this work, a simple method was proposed to suppress the reaction between CZTSSe and Mo, and to optimize the thickness of MoSe 2 . This was achieved by growing a layer of Mo oxide in situ on the Mo electrode surface through soaking the Mo electrode in H 2 O 2 . The Mo oxide layer consisted of MoO 3 , MoO x and MoO 2 . It could suppress the reaction between Mo and CZTSSe, thus preventing the formation of secondary phases in CZTSSe. By further tuning the soaking time, the thickness and density of the Mo oxide layer were optimized, resulting in an optimized thickness of the MoSe 2 layer and a significant improvement in the contact quality at both the front and back interfaces. This improvement is beneficial for suppressing carrier recombination and reducing contact resistance. Furthermore, the Cu/(Zn+Sn) ratio in CZTSSe was optimized, leading to an expansion of the depletion region width. As a result, the reverse saturation current density and series resistance decrease, while the photogenerated current density increases. This ultimately led to a rise in PCE from 7.66% for CZTSSe solar cells with Mo electrodes that were not soaked to 8.95% for those with Mo electrodes soaked for 20 s.
研究领域:
材料科学
·
能源技术
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Energy & Fuels
·
2019
·Vol. 4
·期 4
·1654-1664
·
IF 4.912
Caiyun Wu,Yunmei Du,Yunlei Fu,Di Feng,Hui Li,Zhenyu Xiao,Yanru Liu,Yu Yang,Lei Wang
In this study, a composite of Mo, Co co-doped NiS bulks grown on an Ni foam (Mo,Co-NiS/NF) was synthesized as a bi-functional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) using a simple method. The existence of ZIF-67 and Mo ensure the even distribution of Co and Mo elements and the formation of N doped carbon layer in Mo, Co-NiS/NF. Mo, Co co-doping and NF support greatly improved the electrocatalytic performance of NiS bulks, because metal element doping could improve the intrinsic activity and electrical conductivity. Moreover, the Ni foam could act as a substrate to avoid aggregation and provide nickel source to form the bimetallic sulfide. The product Mo,Co-NiS/NF-400 showed outstanding electrochemical properties, with ultralow overpotential (92 mV vs. RHE) for HER and ultralow overpotential (117.2 mV vs. RHE) for OER to achieve 10 mA cm−2, as well as the ultralow cell voltage (1.36 V) to achieve 20 mA cm−2 for overall water splitting. This study provides an available method to promote the electrocatalytic activity of the traditional monometallic sulfides for overall water splitting.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
SOLID STATE SCIENCES
·
2022
·
IF 3.752
Peijie Weng,Qing Cai,Linfeng Zhang,Huadong Wu,Kun Wu,Jia Guo
In this study, the Mo -doped hollow hierarchical Bi/BiOBr microspheres are prepared by the solvothermal method with the Sn 2+ as reductant. The prepared composites show a good degradation effect for ciprofloxacin (CIP) under visible light. Especially, the BSM-22 composite show the best photocatalytic activity, with the apparent rate constant k as high as 0.03014 min −1 , which is 26.9 times that of the pure BiOBr. It is assumed that the introduction of Sn 2+ facilitate the formation of hollow hierarchical microspheres structure of BiOBr microspheres and the appearance of metallic Bi on the surfaces. Therefore, the transfer and separation efficiency of photogenerated charges is increased in the composites. Impressive, benefit from the microtopography of the hollow structure, the specific surface area of the BSM-22 (53.476 m 2 /g) is 21.76 times than that of the BiOBr (2.458 m 2 /g). The doping of Mo reduces the band gap of BiOBr (exactly from 2.61 to 1.96 eV) and broaden the photoabsorption region. Therefore, the photocatalytic activity of the Mo -doped Bi/BiOBr microspheres are heavily improved in dealing with different kinds of antibiotic molecules. More importantly, these results show that the design strategies of heteroatom doping, metal bismuth production, and morphology control of the bismuth oxybromide composite can greatly improve the visible-light catalytic activity.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2024
·
IF 3.8
Yu-Zhen Xu,Yu-Le Wang,Yu-Dong Shan,Song-Hai Wu,Yong Liu,Xu Han
Selective oxidation of cyclohexene (Cy) to cyclohexene oxide (Cy-ep) by O2 under solvent- and initiator-free conditions is a challenge in chemical processes, which is still constrained by its low selectivity (theoretical selectivity of 50.0%). Given the low epoxide selectivity (<20.0%) of single metal catalysts, we propose a relay catalysis strategy on the oxidation of Cy to Cy-ep with high selectivity by the spherical Mg–Mo bimetallic oxide (MMO). Such a relay catalyst exhibits a desirable Cy conversion of 31.0% and a high selectivity of 49.3% toward Cy-ep. Meanwhile, the high stability and reusability of MMO also indicate its potential to be used for industrial scale-ups. A series of characterizations and DFT calculations reveal that the negatively charged lattice oxygen in [MgII–O–II] adsorbs allylic H of Cy to weaken the bond energy of the allylic C–H bond and form Cy•, and then Cy• rapidly traps O2 to give CyOO•, which subsequently abstracts H from allylic C–H of another Cy to form 2-cyclohexene-1-hydroperoxide (Cy-OOH) and Cy•, achieving the propagation cycle. On the other hand, the Mo(VI) site in MMO catalyzes the produced Cy-OOH peroxo, which then oxidizes Cy to Cy-ep and 2-cyclohexene-1-ol. This work provides insight into the relay catalyst for the epoxidation of olefin with O2 with high selectivity under solvent- and initiator-free conditions.
研究领域:
化学工程
·
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）